! Started logfile: /scr/pima/bg219e_uvs/J1504+1029_X_dfm.log on Thu May 19 18:44:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1504+1029_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1504+1029_X_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.809722 visibilities/baseline/integration-bin.
! Found source: J1504+1029
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 6996 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1504+1029_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.280279Jy  sigma=23.215326
! Fit after  self-cal, rms=0.234210Jy  sigma=4.206989
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8055 mas, bmaj=1.934 mas, bpa=9.264 degrees
! Estimated noise=0.674739 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.596868 Jy
! Component: 100  -  total flux cleaned = 0.732612 Jy
! Total flux subtracted in 100 components = 0.732612 Jy
! Clean residual min=-0.019346 max=0.049523 Jy/beam
! Clean residual mean=-0.000071 rms=0.005200 Jy/beam
! Combined flux in latest and established models = 0.732612 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.732612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.132069Jy  sigma=2.308452
! Fit after  self-cal, rms=0.132026Jy  sigma=2.307807
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532047 Jy
! Component: 100  -  total flux cleaned = 0.0813148 Jy
! Total flux subtracted in 100 components = 0.0813148 Jy
! Clean residual min=-0.014143 max=0.025780 Jy/beam
! Clean residual mean=-0.000053 rms=0.003241 Jy/beam
! Combined flux in latest and established models = 0.813926 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 22 components and 0.813926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096832Jy  sigma=1.667606
! Fit after  self-cal, rms=0.096620Jy  sigma=1.663802
! Inverting map 
! Added new window around map position (1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248284 Jy
! Component: 100  -  total flux cleaned = 0.0397653 Jy
! Total flux subtracted in 100 components = 0.0397653 Jy
! Clean residual min=-0.013187 max=0.015820 Jy/beam
! Clean residual mean=-0.000045 rms=0.002608 Jy/beam
! Combined flux in latest and established models = 0.853692 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 35 components and 0.853692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085522Jy  sigma=1.473315
! Fit after  self-cal, rms=0.085140Jy  sigma=1.465193
! Inverting map 
! Added new window around map position (2.4, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160781 Jy
! Component: 100  -  total flux cleaned = 0.0272987 Jy
! Total flux subtracted in 100 components = 0.0272987 Jy
! Clean residual min=-0.012111 max=0.010998 Jy/beam
! Clean residual mean=-0.000039 rms=0.002245 Jy/beam
! Combined flux in latest and established models = 0.88099 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 48 components and 0.88099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079140Jy  sigma=1.364396
! Fit after  self-cal, rms=0.078938Jy  sigma=1.360492
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.999 mas, bmaj=2.167 mas, bpa=8.289 degrees
! Estimated noise=0.48025 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176609 Jy
! Component: 100  -  total flux cleaned = 0.0304969 Jy
! Component: 150  -  total flux cleaned = 0.0404683 Jy
! Component: 200  -  total flux cleaned = 0.0483408 Jy
! Total flux subtracted in 200 components = 0.0483408 Jy
! Clean residual min=-0.011129 max=0.016694 Jy/beam
! Clean residual mean=-0.000048 rms=0.002558 Jy/beam
! Combined flux in latest and established models = 0.929331 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 76 components and 0.929331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072765Jy  sigma=1.263291
! Fit after  self-cal, rms=0.072492Jy  sigma=1.258422
! Inverting map 
! Added new window around map position (5.6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176914 Jy
! Component: 100  -  total flux cleaned = 0.0287525 Jy
! Component: 150  -  total flux cleaned = 0.0372251 Jy
! Component: 200  -  total flux cleaned = 0.0443275 Jy
! Total flux subtracted in 200 components = 0.0443275 Jy
! Clean residual min=-0.007796 max=0.007369 Jy/beam
! Clean residual mean=-0.000030 rms=0.001720 Jy/beam
! Combined flux in latest and established models = 0.973658 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 108 components and 0.973658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066745Jy  sigma=1.162351
! Fit after  self-cal, rms=0.066430Jy  sigma=1.156248
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.999 x 2.167 at 8.289 degrees (North through East)
! Clean map  min=-0.0064755  max=0.78623 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        1.00     
!   LA        0.99     MK        0.98     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.01     KP        1.01     
!   LA        0.98     MK        0.98     NL        1.02     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.97     MK        1.02     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.99     MK        1.03     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.98     
!   LA        0.98     MK        1.08     NL        1.02     OV        1.00     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.01     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.98     
!   LA        0.98     MK        1.04     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.066430Jy  sigma=1.156248
! Fit after  self-cal, rms=0.063425Jy  sigma=1.105286
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=2.176 mas, bpa=8.37 degrees
! Estimated noise=0.478761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620912 Jy
! Component: 100  -  total flux cleaned = 0.0104897 Jy
! Component: 150  -  total flux cleaned = 0.0137464 Jy
! Component: 200  -  total flux cleaned = 0.0163472 Jy
! Total flux subtracted in 200 components = 0.0163472 Jy
! Clean residual min=-0.005918 max=0.005442 Jy/beam
! Clean residual mean=-0.000009 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.990006 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 143 components and 0.990006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062604Jy  sigma=1.091134
! Fit after  self-cal, rms=0.062547Jy  sigma=1.089972
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062547Jy  sigma=1.089972
! Fit after  self-cal, rms=0.060994Jy  sigma=1.058856
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=2.18 mas, bpa=8.267 degrees
! Estimated noise=0.478925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033 Jy
! Component: 100  -  total flux cleaned = 0.00523571 Jy
! Component: 150  -  total flux cleaned = 0.00634663 Jy
! Component: 200  -  total flux cleaned = 0.00738198 Jy
! Total flux subtracted in 200 components = 0.00738198 Jy
! Clean residual min=-0.004376 max=0.004251 Jy/beam
! Clean residual mean=-0.000010 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.997388 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 167 components and 0.997388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060700Jy  sigma=1.053974
! Fit after  self-cal, rms=0.060681Jy  sigma=1.053711
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134927 Jy
! Component: 100  -  total flux cleaned = 0.00217694 Jy
! Component: 150  -  total flux cleaned = 0.00274468 Jy
! Component: 200  -  total flux cleaned = 0.00326271 Jy
! Total flux subtracted in 200 components = 0.00326271 Jy
! Clean residual min=-0.004304 max=0.004127 Jy/beam
! Clean residual mean=-0.000009 rms=0.000909 Jy/beam
! Combined flux in latest and established models = 1.00065 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 180 components and 1.00065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060567Jy  sigma=1.051859
! Fit after  self-cal, rms=0.060559Jy  sigma=1.051776
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060559Jy  sigma=1.051776
! Fit after  self-cal, rms=0.060585Jy  sigma=1.051254
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=2.18 mas, bpa=8.252 degrees
! Estimated noise=0.478992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109235 Jy
! Component: 100  -  total flux cleaned = 0.0017136 Jy
! Component: 150  -  total flux cleaned = 0.00215665 Jy
! Component: 200  -  total flux cleaned = 0.00264623 Jy
! Total flux subtracted in 200 components = 0.00264623 Jy
! Clean residual min=-0.004267 max=0.003944 Jy/beam
! Clean residual mean=-0.000009 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 1.0033 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 186 components and 1.0033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060497Jy  sigma=1.049833
! Fit after  self-cal, rms=0.060489Jy  sigma=1.049754
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000560126 Jy
! Component: 100  -  total flux cleaned = 0.000972399 Jy
! Component: 150  -  total flux cleaned = 0.00131427 Jy
! Component: 200  -  total flux cleaned = 0.00152783 Jy
! Total flux subtracted in 200 components = 0.00152783 Jy
! Clean residual min=-0.004198 max=0.003935 Jy/beam
! Clean residual mean=-0.000009 rms=0.000877 Jy/beam
! Combined flux in latest and established models = 1.00482 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 196 components and 1.00482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060441Jy  sigma=1.048979
! Fit after  self-cal, rms=0.060437Jy  sigma=1.048944
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060437Jy  sigma=1.048944
! Fit after  self-cal, rms=0.060471Jy  sigma=1.048741
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.078 mas, bmaj=2.961 mas, bpa=-0.5158 degrees
! Estimated noise=0.591941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235368 Jy
! Component: 100  -  total flux cleaned = 0.00356711 Jy
! Component: 150  -  total flux cleaned = 0.00403245 Jy
! Component: 200  -  total flux cleaned = 0.00445745 Jy
! Total flux subtracted in 200 components = 0.00445745 Jy
! Clean residual min=-0.004513 max=0.004497 Jy/beam
! Clean residual mean=-0.000016 rms=0.001141 Jy/beam
! Combined flux in latest and established models = 1.00928 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 199 components and 1.00928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060464Jy  sigma=1.048479
! Fit after  self-cal, rms=0.060454Jy  sigma=1.048372
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049913 Jy
! Component: 100  -  total flux cleaned = 0.000703342 Jy
! Component: 150  -  total flux cleaned = 0.000882246 Jy
! Component: 200  -  total flux cleaned = 0.000991211 Jy
! Total flux subtracted in 200 components = 0.000991211 Jy
! Clean residual min=-0.004401 max=0.004468 Jy/beam
! Clean residual mean=-0.000016 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 1.01027 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 204 components and 1.01027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060461Jy  sigma=1.048387
! Fit after  self-cal, rms=0.060456Jy  sigma=1.048353
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=2.181 mas, bpa=8.233 degrees
! Estimated noise=0.479091 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 2.181 at 8.233 degrees (North through East)
! Clean map  min=-0.0038009  max=0.78345 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060456Jy  sigma=1.048353
! Fit after  self-cal, rms=0.055926Jy  sigma=0.948673
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.181 mas, bpa=8.226 degrees
! Estimated noise=0.478953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00123005 Jy
! Component: 100  -  total flux cleaned = -0.00138504 Jy
! Component: 150  -  total flux cleaned = -0.00147142 Jy
! Component: 200  -  total flux cleaned = -0.00147198 Jy
! Total flux subtracted in 200 components = -0.00147198 Jy
! Clean residual min=-0.004248 max=0.003872 Jy/beam
! Clean residual mean=-0.000008 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 1.0088 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 216 components and 1.0088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055837Jy  sigma=0.947298
! Fit after  self-cal, rms=0.055833Jy  sigma=0.947256
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161137 Jy
! Component: 100  -  total flux cleaned = -0.000124597 Jy
! Component: 150  -  total flux cleaned = -9.04621e-05 Jy
! Component: 200  -  total flux cleaned = -9.14827e-05 Jy
! Total flux subtracted in 200 components = -9.14827e-05 Jy
! Clean residual min=-0.004209 max=0.003879 Jy/beam
! Clean residual mean=-0.000008 rms=0.000848 Jy/beam
! Combined flux in latest and established models = 1.00871 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 219 components and 1.00871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055790Jy  sigma=0.946582
! Fit after  self-cal, rms=0.055787Jy  sigma=0.946556
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055787Jy  sigma=0.946556
! Fit after  self-cal, rms=0.055814Jy  sigma=0.946431
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8113 mas, bmaj=1.945 mas, bpa=9.158 degrees
! Estimated noise=0.676666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.598223 Jy
! Component: 100  -  total flux cleaned = 0.734183 Jy
! Component: 150  -  total flux cleaned = 0.788279 Jy
! Component: 200  -  total flux cleaned = 0.8191 Jy
! Total flux subtracted in 200 components = 0.8191 Jy
! Clean residual min=-0.010065 max=0.016580 Jy/beam
! Clean residual mean=-0.000048 rms=0.002679 Jy/beam
! Combined flux in latest and established models = 0.8191 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.8191 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.182 mas, bpa=8.208 degrees
! Estimated noise=0.479028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0328463 Jy
! Component: 100  -  total flux cleaned = 0.0559491 Jy
! Component: 150  -  total flux cleaned = 0.074095 Jy
! Component: 200  -  total flux cleaned = 0.0888729 Jy
! Total flux subtracted in 200 components = 0.0888729 Jy
! Clean residual min=-0.007323 max=0.010046 Jy/beam
! Clean residual mean=-0.000045 rms=0.002211 Jy/beam
! Combined flux in latest and established models = 0.907973 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 63 components and 0.907973 Jy
! Inverting map 
! Added new window around map position (16.6, 40.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124426 Jy
! Component: 100  -  total flux cleaned = 0.0229289 Jy
! Component: 150  -  total flux cleaned = 0.031939 Jy
! Component: 200  -  total flux cleaned = 0.0397471 Jy
! Total flux subtracted in 200 components = 0.0397471 Jy
! Clean residual min=-0.005531 max=0.005844 Jy/beam
! Clean residual mean=-0.000031 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 0.94772 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 103 components and 0.94772 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.078 mas, bmaj=2.962 mas, bpa=-0.5129 degrees
! Estimated noise=0.59168 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126649 Jy
! Component: 100  -  total flux cleaned = 0.0223039 Jy
! Component: 150  -  total flux cleaned = 0.0299093 Jy
! Component: 200  -  total flux cleaned = 0.0359954 Jy
! Total flux subtracted in 200 components = 0.0359954 Jy
! Clean residual min=-0.004917 max=0.005092 Jy/beam
! Clean residual mean=-0.000036 rms=0.001500 Jy/beam
! Combined flux in latest and established models = 0.983716 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00490028 Jy
! Component: 100  -  total flux cleaned = 0.00888509 Jy
! Component: 150  -  total flux cleaned = 0.0121776 Jy
! Component: 200  -  total flux cleaned = 0.014918 Jy
! Total flux subtracted in 200 components = 0.014918 Jy
! Clean residual min=-0.004212 max=0.004328 Jy/beam
! Clean residual mean=-0.000025 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.998634 Jy
! Adding 107 model components to the UV plane model.
! The established model now contains 191 components and 0.998633 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=2.182 mas, bpa=8.208 degrees
! Estimated noise=0.479028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024259 Jy
! Component: 100  -  total flux cleaned = 0.00341668 Jy
! Component: 150  -  total flux cleaned = 0.0042949 Jy
! Component: 200  -  total flux cleaned = 0.00503261 Jy
! Total flux subtracted in 200 components = 0.00503261 Jy
! Clean residual min=-0.004155 max=0.004330 Jy/beam
! Clean residual mean=-0.000010 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 1.00367 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 209 components and 1.00367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055811Jy  sigma=0.947358
! Fit after  self-cal, rms=0.055759Jy  sigma=0.946243
wmodel /J1504+1029_X_map.mod
! wmodel: Unable to open new model file: /J1504+1029_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1504+1029_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.007 x 2.182 at 8.208 degrees (North through East)
! Clean map  min=-0.0040125  max=0.78401 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1504+1029_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.784012 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000840581 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.321646 0.321646 0.643292 1.28658 2.57317 5.14634 10.2927 20.5853 41.1707 82.3414
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.784 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  932.702 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1504+1029_X_dfm.log closed on Thu May 19 18:44:44 2016