! Started logfile: /scr/pima/bg219e_uvs/J1454+1624_X_dfm.log on Thu May 19 18:44:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1454+1624_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1454+1624_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.783333 visibilities/baseline/integration-bin.
! Found source: J1454+1624
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15228 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1454+1624_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016313Jy  sigma=24.091374
! Fit after  self-cal, rms=0.843702Jy  sigma=19.939465
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.814 mas, bmaj=1.993 mas, bpa=9.487 degrees
! Estimated noise=0.40371 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116894 Jy
! Component: 100  -  total flux cleaned = 0.147568 Jy
! Total flux subtracted in 100 components = 0.147568 Jy
! Clean residual min=-0.005882 max=0.013195 Jy/beam
! Clean residual mean=-0.000017 rms=0.001613 Jy/beam
! Combined flux in latest and established models = 0.147568 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.147568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068926Jy  sigma=1.574603
! Fit after  self-cal, rms=0.068886Jy  sigma=1.573534
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014468 Jy
! Component: 100  -  total flux cleaned = 0.022694 Jy
! Total flux subtracted in 100 components = 0.022694 Jy
! Clean residual min=-0.004695 max=0.010472 Jy/beam
! Clean residual mean=-0.000012 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.170262 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.170262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064416Jy  sigma=1.457512
! Fit after  self-cal, rms=0.064394Jy  sigma=1.456884
! Inverting map 
! Added new window around map position (-1.6, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00919484 Jy
! Component: 100  -  total flux cleaned = 0.0144851 Jy
! Total flux subtracted in 100 components = 0.0144851 Jy
! Clean residual min=-0.003597 max=0.003774 Jy/beam
! Clean residual mean=-0.000009 rms=0.000824 Jy/beam
! Combined flux in latest and established models = 0.184747 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 32 components and 0.184747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062576Jy  sigma=1.409886
! Fit after  self-cal, rms=0.062437Jy  sigma=1.406918
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=2.225 mas, bpa=7.165 degrees
! Estimated noise=0.267495 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00684931 Jy
! Component: 100  -  total flux cleaned = 0.0110677 Jy
! Component: 150  -  total flux cleaned = 0.0139302 Jy
! Component: 200  -  total flux cleaned = 0.0159507 Jy
! Total flux subtracted in 200 components = 0.0159507 Jy
! Clean residual min=-0.002370 max=0.002200 Jy/beam
! Clean residual mean=-0.000009 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.200698 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 64 components and 0.200698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061618Jy  sigma=1.385899
! Fit after  self-cal, rms=0.061565Jy  sigma=1.384593
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 2.225 at 7.165 degrees (North through East)
! Clean map  min=-0.0020968  max=0.15631 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00     KP        1.02     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.04     OV        1.02     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.04     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.98     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.02     OV        1.02     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.00     KP        0.95     
!   LA        0.99     MK        1.09     NL        1.01     OV        1.04     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.03     KP        0.96     
!   LA        0.98     MK        1.04     NL        1.02     OV        1.02     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.98     KP        0.96     
!   LA        0.97     MK        1.08     NL        1.01     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.99     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.04     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.01     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        0.96     
!   LA        0.99     MK        1.01     NL        1.05     OV        1.02     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.02     KP        1.01     
!   LA        0.98     MK        0.97     NL        1.04     OV        0.99     
!   PT        0.94     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.96     KP        0.98     
!   LA        0.96     MK        1.09     NL        1.03     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.061565Jy  sigma=1.384593
! Fit after  self-cal, rms=0.061154Jy  sigma=1.378636
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=2.234 mas, bpa=7.189 degrees
! Estimated noise=0.266663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00075172 Jy
! Component: 100  -  total flux cleaned = 0.000977112 Jy
! Component: 150  -  total flux cleaned = 0.00104559 Jy
! Component: 200  -  total flux cleaned = 0.00103221 Jy
! Total flux subtracted in 200 components = 0.00103221 Jy
! Clean residual min=-0.001803 max=0.001948 Jy/beam
! Clean residual mean=-0.000004 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.20173 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.20173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061138Jy  sigma=1.378240
! Fit after  self-cal, rms=0.061139Jy  sigma=1.378128
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061139Jy  sigma=1.378128
! Fit after  self-cal, rms=0.060884Jy  sigma=1.372826
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=2.238 mas, bpa=7.073 degrees
! Estimated noise=0.266612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312614 Jy
! Component: 100  -  total flux cleaned = 0.000313877 Jy
! Component: 150  -  total flux cleaned = 0.000348587 Jy
! Component: 200  -  total flux cleaned = 0.000332876 Jy
! Total flux subtracted in 200 components = 0.000332876 Jy
! Clean residual min=-0.001633 max=0.001808 Jy/beam
! Clean residual mean=-0.000006 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.202063 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 79 components and 0.202063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060869Jy  sigma=1.372529
! Fit after  self-cal, rms=0.060870Jy  sigma=1.372456
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171825 Jy
! Component: 100  -  total flux cleaned = 0.00271402 Jy
! Component: 150  -  total flux cleaned = 0.00315906 Jy
! Component: 200  -  total flux cleaned = 0.00343779 Jy
! Total flux subtracted in 200 components = 0.00343779 Jy
! Clean residual min=-0.001495 max=0.001430 Jy/beam
! Clean residual mean=-0.000005 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.205501 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 0.205501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060815Jy  sigma=1.371160
! Fit after  self-cal, rms=0.060813Jy  sigma=1.371077
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060813Jy  sigma=1.371077
! Fit after  self-cal, rms=0.060794Jy  sigma=1.371032
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=2.238 mas, bpa=7.01 degrees
! Estimated noise=0.26647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000549904 Jy
! Component: 100  -  total flux cleaned = 0.000758843 Jy
! Component: 150  -  total flux cleaned = 0.000869938 Jy
! Component: 200  -  total flux cleaned = 0.000986912 Jy
! Total flux subtracted in 200 components = 0.000986912 Jy
! Clean residual min=-0.001493 max=0.001461 Jy/beam
! Clean residual mean=-0.000004 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.206488 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 104 components and 0.206488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060781Jy  sigma=1.370769
! Fit after  self-cal, rms=0.060781Jy  sigma=1.370756
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218989 Jy
! Component: 100  -  total flux cleaned = 0.000263449 Jy
! Component: 150  -  total flux cleaned = 0.000319189 Jy
! Component: 200  -  total flux cleaned = 0.000371945 Jy
! Total flux subtracted in 200 components = 0.000371945 Jy
! Clean residual min=-0.001481 max=0.001457 Jy/beam
! Clean residual mean=-0.000004 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.20686 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 112 components and 0.20686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060775Jy  sigma=1.370624
! Fit after  self-cal, rms=0.060775Jy  sigma=1.370619
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060775Jy  sigma=1.370619
! Fit after  self-cal, rms=0.060790Jy  sigma=1.370607
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.122 mas, bmaj=2.888 mas, bpa=0.03327 degrees
! Estimated noise=0.319088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000511169 Jy
! Component: 100  -  total flux cleaned = 0.000753572 Jy
! Component: 150  -  total flux cleaned = 0.000897215 Jy
! Component: 200  -  total flux cleaned = 0.0009948 Jy
! Total flux subtracted in 200 components = 0.0009948 Jy
! Clean residual min=-0.001432 max=0.001445 Jy/beam
! Clean residual mean=-0.000007 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.207855 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 117 components and 0.207855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060789Jy  sigma=1.370544
! Fit after  self-cal, rms=0.060789Jy  sigma=1.370534
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.64655e-05 Jy
! Component: 100  -  total flux cleaned = 0.000147004 Jy
! Component: 150  -  total flux cleaned = 0.000185788 Jy
! Component: 200  -  total flux cleaned = 0.000213909 Jy
! Total flux subtracted in 200 components = 0.000213909 Jy
! Clean residual min=-0.001417 max=0.001450 Jy/beam
! Clean residual mean=-0.000007 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.208069 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 122 components and 0.208069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060789Jy  sigma=1.370519
! Fit after  self-cal, rms=0.060789Jy  sigma=1.370516
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=2.238 mas, bpa=6.981 degrees
! Estimated noise=0.266525 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.009 x 2.238 at 6.981 degrees (North through East)
! Clean map  min=-0.0014043  max=0.15547 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8206 mas, bmaj=2.005 mas, bpa=9.283 degrees
! Estimated noise=0.40519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117086 Jy
! Component: 100  -  total flux cleaned = 0.14817 Jy
! Component: 150  -  total flux cleaned = 0.164007 Jy
! Component: 200  -  total flux cleaned = 0.173647 Jy
! Total flux subtracted in 200 components = 0.173647 Jy
! Clean residual min=-0.004294 max=0.005132 Jy/beam
! Clean residual mean=-0.000010 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.173647 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.173647 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=2.238 mas, bpa=6.981 degrees
! Estimated noise=0.266525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00973208 Jy
! Component: 100  -  total flux cleaned = 0.0157102 Jy
! Component: 150  -  total flux cleaned = 0.0197255 Jy
! Component: 200  -  total flux cleaned = 0.0225025 Jy
! Total flux subtracted in 200 components = 0.0225025 Jy
! Clean residual min=-0.002137 max=0.001761 Jy/beam
! Clean residual mean=-0.000008 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.196149 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 50 components and 0.196149 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.122 mas, bmaj=2.888 mas, bpa=0.03327 degrees
! Estimated noise=0.319088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00295316 Jy
! Component: 100  -  total flux cleaned = 0.00489489 Jy
! Component: 150  -  total flux cleaned = 0.00633395 Jy
! Component: 200  -  total flux cleaned = 0.00745766 Jy
! Total flux subtracted in 200 components = 0.00745766 Jy
! Clean residual min=-0.001715 max=0.001447 Jy/beam
! Clean residual mean=-0.000011 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.203607 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000899903 Jy
! Component: 100  -  total flux cleaned = 0.00163872 Jy
! Component: 150  -  total flux cleaned = 0.00225027 Jy
! Component: 200  -  total flux cleaned = 0.00275794 Jy
! Total flux subtracted in 200 components = 0.00275794 Jy
! Clean residual min=-0.001545 max=0.001431 Jy/beam
! Clean residual mean=-0.000008 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.206365 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 102 components and 0.206365 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=2.238 mas, bpa=6.981 degrees
! Estimated noise=0.266525 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208875 Jy
! Component: 100  -  total flux cleaned = 0.000237515 Jy
! Component: 150  -  total flux cleaned = 0.00037152 Jy
! Component: 200  -  total flux cleaned = 0.000419894 Jy
! Total flux subtracted in 200 components = 0.000419894 Jy
! Clean residual min=-0.001631 max=0.001382 Jy/beam
! Clean residual mean=-0.000004 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.206785 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 118 components and 0.206785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060824Jy  sigma=1.371254
! Fit after  self-cal, rms=0.060818Jy  sigma=1.371193
wmodel /J1454+1624_X_map.mod
! wmodel: Unable to open new model file: /J1454+1624_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1454+1624_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.009 x 2.238 at 6.981 degrees (North through East)
! Clean map  min=-0.0015001  max=0.15585 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1454+1624_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.155849 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000345879 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.665795 0.665795 1.33159 2.66318 5.32636 10.6527 21.3054 42.6109 85.2217
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.155 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  450.589 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1454+1624_X_dfm.log closed on Thu May 19 18:44:35 2016