! Started logfile: /scr/pima/bg219e_uvs/J1439+4958_S_dfm.log on Thu May 19 18:44:11 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1439+4958_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1439+4958_S_uva.fits
! AN table 1: 18 integrations on 36 of 36 possible baselines.
! AN table 2: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.615226 visibilities/baseline/integration-bin.
! Found source: J1439+4958
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1439+4958_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 136 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 136 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 136 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 136 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.016801Jy  sigma=22.862060
! Fit after  self-cal, rms=0.869946Jy  sigma=19.540965
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.518 mas, bmaj=5.872 mas, bpa=39.69 degrees
! Estimated noise=0.709697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100973 Jy
! Component: 100  -  total flux cleaned = 0.123136 Jy
! Total flux subtracted in 100 components = 0.123136 Jy
! Clean residual min=-0.004524 max=0.006730 Jy/beam
! Clean residual mean=0.000010 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.123136 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.123136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063839Jy  sigma=1.358973
! Fit after  self-cal, rms=0.063642Jy  sigma=1.351841
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00666207 Jy
! Component: 100  -  total flux cleaned = 0.0099236 Jy
! Total flux subtracted in 100 components = 0.0099236 Jy
! Clean residual min=-0.003861 max=0.005068 Jy/beam
! Clean residual mean=0.000006 rms=0.001023 Jy/beam
! Combined flux in latest and established models = 0.13306 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.13306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062800Jy  sigma=1.331688
! Fit after  self-cal, rms=0.062785Jy  sigma=1.331330
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.428 mas, bmaj=6.372 mas, bpa=37.64 degrees
! Estimated noise=0.499908 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325972 Jy
! Component: 100  -  total flux cleaned = 0.00501182 Jy
! Component: 150  -  total flux cleaned = 0.00585834 Jy
! Component: 200  -  total flux cleaned = 0.00624537 Jy
! Total flux subtracted in 200 components = 0.00624537 Jy
! Clean residual min=-0.003415 max=0.003455 Jy/beam
! Clean residual mean=0.000006 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.139305 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.139305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062601Jy  sigma=1.327516
! Fit after  self-cal, rms=0.062599Jy  sigma=1.327452
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.428 x 6.372 at 37.64 degrees (North through East)
! Clean map  min=-0.0032921  max=0.13174 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        1.00     KP        1.00     
!   LA        1.01     NL        1.04     OV        1.01     PT        0.96     
!   SC        1.01     
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.01     HN        0.91     KP        0.93     
!   LA        0.94     MK        1.09     NL        1.00     OV        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        1.06     
!   LA        0.97     NL        1.01     OV        0.98     PT        1.04     
!   SC        1.01     
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        0.95     HN        0.98     KP        0.96     
!   LA        1.00     MK        1.12     NL        0.97     OV        0.96     
!   SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.03     KP        1.00     
!   LA        0.98     NL        0.99     OV        0.99     PT        1.08     
!   SC        1.00     
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.97     HN        0.98     KP        0.99     
!   LA        0.96     MK        1.20     NL        0.95     OV        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.07     HN        1.02     KP        1.02     
!   LA        1.07     NL        0.97     OV        1.02     PT        1.06     
!   SC        1.00     
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.97     HN        0.95     KP        1.02     
!   LA        0.92     MK        1.10     NL        0.98     OV        0.93     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.062599Jy  sigma=1.327452
! Fit after  self-cal, rms=0.062752Jy  sigma=1.317294
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.368 mas, bmaj=6.314 mas, bpa=38.36 degrees
! Estimated noise=0.511178 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.15866e-05 Jy
! Component: 100  -  total flux cleaned = -5.33287e-05 Jy
! Component: 150  -  total flux cleaned = -0.000125162 Jy
! Component: 200  -  total flux cleaned = -0.000203785 Jy
! Total flux subtracted in 200 components = -0.000203785 Jy
! Clean residual min=-0.002422 max=0.002437 Jy/beam
! Clean residual mean=0.000007 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.139101 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 46 components and 0.139101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062740Jy  sigma=1.317024
! Fit after  self-cal, rms=0.062774Jy  sigma=1.316846
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062774Jy  sigma=1.316846
! Fit after  self-cal, rms=0.062796Jy  sigma=1.316804
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.36 mas, bmaj=6.322 mas, bpa=38.36 degrees
! Estimated noise=0.51133 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125574 Jy
! Component: 100  -  total flux cleaned = 6.11114e-05 Jy
! Component: 150  -  total flux cleaned = 4.69824e-05 Jy
! Component: 200  -  total flux cleaned = 3.37204e-05 Jy
! Total flux subtracted in 200 components = 3.37204e-05 Jy
! Clean residual min=-0.002372 max=0.002441 Jy/beam
! Clean residual mean=0.000007 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.139135 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.139135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062788Jy  sigma=1.316653
! Fit after  self-cal, rms=0.062789Jy  sigma=1.316648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.52049e-06 Jy
! Component: 100  -  total flux cleaned = -1.97638e-05 Jy
! Component: 150  -  total flux cleaned = -8.90164e-06 Jy
! Component: 200  -  total flux cleaned = -8.71807e-06 Jy
! Total flux subtracted in 200 components = -8.71807e-06 Jy
! Clean residual min=-0.002352 max=0.002440 Jy/beam
! Clean residual mean=0.000007 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 0.139126 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.139126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062785Jy  sigma=1.316575
! Fit after  self-cal, rms=0.062785Jy  sigma=1.316572
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062785Jy  sigma=1.316572
! Fit after  self-cal, rms=0.062892Jy  sigma=1.317071
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.356 mas, bmaj=6.331 mas, bpa=38.34 degrees
! Estimated noise=0.511354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.43412e-05 Jy
! Component: 100  -  total flux cleaned = -0.000118418 Jy
! Component: 150  -  total flux cleaned = -0.00011842 Jy
! Component: 200  -  total flux cleaned = -0.000139492 Jy
! Total flux subtracted in 200 components = -0.000139492 Jy
! Clean residual min=-0.002343 max=0.002414 Jy/beam
! Clean residual mean=0.000008 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.138987 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.138987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062887Jy  sigma=1.316967
! Fit after  self-cal, rms=0.062890Jy  sigma=1.316959
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.54596e-06 Jy
! Component: 100  -  total flux cleaned = 4.78828e-06 Jy
! Component: 150  -  total flux cleaned = -4.04209e-06 Jy
! Component: 200  -  total flux cleaned = 5.04059e-06 Jy
! Total flux subtracted in 200 components = 5.04059e-06 Jy
! Clean residual min=-0.002322 max=0.002403 Jy/beam
! Clean residual mean=0.000008 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.138992 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 53 components and 0.138992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062887Jy  sigma=1.316909
! Fit after  self-cal, rms=0.062887Jy  sigma=1.316907
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062887Jy  sigma=1.316907
! Fit after  self-cal, rms=0.062874Jy  sigma=1.316913
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.788 mas, bmaj=8.486 mas, bpa=25.37 degrees
! Estimated noise=0.597605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00045463 Jy
! Component: 100  -  total flux cleaned = 0.000531926 Jy
! Component: 150  -  total flux cleaned = 0.00056665 Jy
! Component: 200  -  total flux cleaned = 0.000589609 Jy
! Total flux subtracted in 200 components = 0.000589609 Jy
! Clean residual min=-0.002644 max=0.002395 Jy/beam
! Clean residual mean=0.000012 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.139582 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 59 components and 0.139582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062872Jy  sigma=1.317004
! Fit after  self-cal, rms=0.062872Jy  sigma=1.316985
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.57459e-05 Jy
! Component: 100  -  total flux cleaned = 9.08348e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103294 Jy
! Component: 200  -  total flux cleaned = 0.000113657 Jy
! Total flux subtracted in 200 components = 0.000113657 Jy
! Clean residual min=-0.002672 max=0.002419 Jy/beam
! Clean residual mean=0.000012 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.139695 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 61 components and 0.139695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062873Jy  sigma=1.317034
! Fit after  self-cal, rms=0.062873Jy  sigma=1.317027
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.35 mas, bmaj=6.338 mas, bpa=38.35 degrees
! Estimated noise=0.511242 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.35 x 6.338 at 38.35 degrees (North through East)
! Clean map  min=-0.002303  max=0.13152 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.501 mas, bmaj=5.92 mas, bpa=39.65 degrees
! Estimated noise=0.726367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101339 Jy
! Component: 100  -  total flux cleaned = 0.123892 Jy
! Component: 150  -  total flux cleaned = 0.130932 Jy
! Component: 200  -  total flux cleaned = 0.134503 Jy
! Total flux subtracted in 200 components = 0.134503 Jy
! Clean residual min=-0.003701 max=0.003456 Jy/beam
! Clean residual mean=0.000008 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.134503 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.134503 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.35 mas, bmaj=6.338 mas, bpa=38.35 degrees
! Estimated noise=0.511242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00265015 Jy
! Component: 100  -  total flux cleaned = 0.00383819 Jy
! Component: 150  -  total flux cleaned = 0.00419762 Jy
! Component: 200  -  total flux cleaned = 0.00422145 Jy
! Total flux subtracted in 200 components = 0.00422145 Jy
! Clean residual min=-0.002493 max=0.002494 Jy/beam
! Clean residual mean=0.000008 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.138724 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.138724 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.788 mas, bmaj=8.486 mas, bpa=25.37 degrees
! Estimated noise=0.597605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000633572 Jy
! Component: 100  -  total flux cleaned = 0.000785953 Jy
! Component: 150  -  total flux cleaned = 0.000813411 Jy
! Component: 200  -  total flux cleaned = 0.000837832 Jy
! Total flux subtracted in 200 components = 0.000837832 Jy
! Clean residual min=-0.002711 max=0.002421 Jy/beam
! Clean residual mean=0.000012 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.139562 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.15643e-05 Jy
! Component: 100  -  total flux cleaned = 3.44449e-05 Jy
! Component: 150  -  total flux cleaned = 4.64933e-05 Jy
! Component: 200  -  total flux cleaned = 5.77676e-05 Jy
! Total flux subtracted in 200 components = 5.77676e-05 Jy
! Clean residual min=-0.002711 max=0.002436 Jy/beam
! Clean residual mean=0.000012 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.13962 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 42 components and 0.13962 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.35 mas, bmaj=6.338 mas, bpa=38.35 degrees
! Estimated noise=0.511242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000443482 Jy
! Component: 100  -  total flux cleaned = -0.000555476 Jy
! Component: 150  -  total flux cleaned = -0.000620552 Jy
! Component: 200  -  total flux cleaned = -0.00067801 Jy
! Total flux subtracted in 200 components = -0.00067801 Jy
! Clean residual min=-0.002404 max=0.002393 Jy/beam
! Clean residual mean=0.000008 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.138942 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 52 components and 0.138942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062883Jy  sigma=1.317120
! Fit after  self-cal, rms=0.062883Jy  sigma=1.317096
wmodel /J1439+4958_S_map.mod
! wmodel: Unable to open new model file: /J1439+4958_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1439+4958_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.35 x 6.338 at 38.35 degrees (North through East)
! Clean map  min=-0.0023152  max=0.13146 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1439+4958_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.131464 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000632887 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.44425 1.44425 2.88849 5.77698 11.554 23.1079 46.2159 92.4317
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.131 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  207.72 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1439+4958_S_dfm.log closed on Thu May 19 18:44:14 2016