! Started logfile: /scr/pima/bg219e_uvs/J1438+4418_S_dfm.log on Thu May 19 18:44:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1438+4418_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1438+4418_S_uva.fits
! AN table 1: 21 integrations on 36 of 36 possible baselines.
! AN table 2: 21 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.906746 visibilities/baseline/integration-bin.
! Found source: J1438+4418
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5484 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1438+4418_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.048909Jy  sigma=22.948601
! Fit after  self-cal, rms=0.708135Jy  sigma=15.393797
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.492 mas, bmaj=6.127 mas, bpa=38.66 degrees
! Estimated noise=0.651456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.227626 Jy
! Component: 100  -  total flux cleaned = 0.2773 Jy
! Total flux subtracted in 100 components = 0.2773 Jy
! Clean residual min=-0.006145 max=0.014375 Jy/beam
! Clean residual mean=0.000013 rms=0.001887 Jy/beam
! Combined flux in latest and established models = 0.2773 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.2773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066509Jy  sigma=1.397163
! Fit after  self-cal, rms=0.066507Jy  sigma=1.397079
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141639 Jy
! Component: 100  -  total flux cleaned = 0.0209891 Jy
! Total flux subtracted in 100 components = 0.0209891 Jy
! Clean residual min=-0.005209 max=0.006286 Jy/beam
! Clean residual mean=0.000008 rms=0.001356 Jy/beam
! Combined flux in latest and established models = 0.298289 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.298289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063494Jy  sigma=1.319265
! Fit after  self-cal, rms=0.063495Jy  sigma=1.319190
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.387 mas, bmaj=6.585 mas, bpa=37.54 degrees
! Estimated noise=0.460448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048594 Jy
! Component: 100  -  total flux cleaned = 0.00756134 Jy
! Component: 150  -  total flux cleaned = 0.00925148 Jy
! Component: 200  -  total flux cleaned = 0.00982912 Jy
! Total flux subtracted in 200 components = 0.00982912 Jy
! Clean residual min=-0.003734 max=0.004514 Jy/beam
! Clean residual mean=-0.000005 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 0.308118 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 30 components and 0.308118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063146Jy  sigma=1.309953
! Fit after  self-cal, rms=0.063145Jy  sigma=1.309870
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.387 x 6.585 at 37.54 degrees (North through East)
! Clean map  min=-0.0037013  max=0.29427 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.98     KP        0.97     
!   LA        1.01     NL        0.96     OV        1.00     PT        0.93     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.01     HN        0.94     KP        0.99     
!   LA        1.00     MK        1.12     NL        0.99     OV        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.97     KP        0.97     
!   LA        0.98     NL        0.98     OV        0.98     PT        1.03     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.06     HN        0.96     KP        1.01     
!   LA        1.02     MK        1.10     NL        0.96     OV        0.98     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.03     KP        0.97     
!   LA        1.01     NL        0.97     OV        1.01     PT        1.03     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.00     HN        0.97     KP        1.01     
!   LA        1.03     MK        1.14     NL        0.96     OV        0.97     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.02     KP        1.02     
!   LA        1.01     NL        0.98     OV        1.00     PT        1.06     
!   SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.02     HN        0.99     KP        1.03     
!   LA        1.00     MK        1.17     NL        0.95     OV        1.03     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.063145Jy  sigma=1.309870
! Fit after  self-cal, rms=0.061852Jy  sigma=1.267815
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.406 mas, bmaj=6.566 mas, bpa=37.56 degrees
! Estimated noise=0.459859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000387866 Jy
! Component: 100  -  total flux cleaned = 0.000248977 Jy
! Component: 150  -  total flux cleaned = 0.000183174 Jy
! Component: 200  -  total flux cleaned = 0.000132103 Jy
! Total flux subtracted in 200 components = 0.000132103 Jy
! Clean residual min=-0.002346 max=0.002337 Jy/beam
! Clean residual mean=-0.000001 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.30825 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 40 components and 0.30825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061781Jy  sigma=1.266688
! Fit after  self-cal, rms=0.061806Jy  sigma=1.266575
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061806Jy  sigma=1.266575
! Fit after  self-cal, rms=0.061820Jy  sigma=1.266241
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.412 mas, bmaj=6.555 mas, bpa=37.58 degrees
! Estimated noise=0.459933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156403 Jy
! Component: 100  -  total flux cleaned = 7.22653e-05 Jy
! Component: 150  -  total flux cleaned = 3.43643e-05 Jy
! Component: 200  -  total flux cleaned = 4.67916e-06 Jy
! Total flux subtracted in 200 components = 4.67916e-06 Jy
! Clean residual min=-0.002373 max=0.002318 Jy/beam
! Clean residual mean=-0.000001 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.308255 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 49 components and 0.308255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061793Jy  sigma=1.265895
! Fit after  self-cal, rms=0.061793Jy  sigma=1.265888
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.30594e-06 Jy
! Component: 100  -  total flux cleaned = -1.94157e-05 Jy
! Component: 150  -  total flux cleaned = -1.90943e-05 Jy
! Component: 200  -  total flux cleaned = -1.86372e-05 Jy
! Total flux subtracted in 200 components = -1.86372e-05 Jy
! Clean residual min=-0.002354 max=0.002318 Jy/beam
! Clean residual mean=-0.000001 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.308236 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 54 components and 0.308236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061789Jy  sigma=1.265842
! Fit after  self-cal, rms=0.061789Jy  sigma=1.265842
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061789Jy  sigma=1.265842
! Fit after  self-cal, rms=0.061814Jy  sigma=1.265667
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.417 mas, bmaj=6.548 mas, bpa=37.6 degrees
! Estimated noise=0.460031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.62845e-05 Jy
! Component: 100  -  total flux cleaned = 7.99001e-06 Jy
! Component: 150  -  total flux cleaned = -4.23124e-06 Jy
! Component: 200  -  total flux cleaned = -2.58616e-05 Jy
! Total flux subtracted in 200 components = -2.58616e-05 Jy
! Clean residual min=-0.002381 max=0.002313 Jy/beam
! Clean residual mean=-0.000001 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.30821 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 57 components and 0.30821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061803Jy  sigma=1.265554
! Fit after  self-cal, rms=0.061803Jy  sigma=1.265552
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.68224e-05 Jy
! Component: 100  -  total flux cleaned = -4.44007e-05 Jy
! Component: 150  -  total flux cleaned = -5.33205e-05 Jy
! Component: 200  -  total flux cleaned = -5.31508e-05 Jy
! Total flux subtracted in 200 components = -5.31508e-05 Jy
! Clean residual min=-0.002382 max=0.002303 Jy/beam
! Clean residual mean=-0.000001 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.308157 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 59 components and 0.308157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061800Jy  sigma=1.265513
! Fit after  self-cal, rms=0.061801Jy  sigma=1.265512
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061801Jy  sigma=1.265512
! Fit after  self-cal, rms=0.061824Jy  sigma=1.265447
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.847 mas, bmaj=8.462 mas, bpa=12.15 degrees
! Estimated noise=0.531213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012159 Jy
! Component: 100  -  total flux cleaned = 0.000130053 Jy
! Component: 150  -  total flux cleaned = 0.000122418 Jy
! Component: 200  -  total flux cleaned = 0.000122192 Jy
! Total flux subtracted in 200 components = 0.000122192 Jy
! Clean residual min=-0.002225 max=0.002494 Jy/beam
! Clean residual mean=-0.000003 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.308279 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 61 components and 0.308279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061826Jy  sigma=1.265437
! Fit after  self-cal, rms=0.061826Jy  sigma=1.265426
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.6961e-06 Jy
! Component: 100  -  total flux cleaned = -7.41513e-06 Jy
! Component: 150  -  total flux cleaned = -7.00344e-06 Jy
! Component: 200  -  total flux cleaned = -6.8798e-06 Jy
! Total flux subtracted in 200 components = -6.8798e-06 Jy
! Clean residual min=-0.002215 max=0.002487 Jy/beam
! Clean residual mean=-0.000003 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.308272 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 64 components and 0.308272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061826Jy  sigma=1.265417
! Fit after  self-cal, rms=0.061825Jy  sigma=1.265414
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.421 mas, bmaj=6.544 mas, bpa=37.63 degrees
! Estimated noise=0.460125 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.421 x 6.544 at 37.63 degrees (North through East)
! Clean map  min=-0.0023829  max=0.29476 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.534 mas, bmaj=6.088 mas, bpa=38.93 degrees
! Estimated noise=0.654703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.228745 Jy
! Component: 100  -  total flux cleaned = 0.278626 Jy
! Component: 150  -  total flux cleaned = 0.290879 Jy
! Component: 200  -  total flux cleaned = 0.296787 Jy
! Total flux subtracted in 200 components = 0.296787 Jy
! Clean residual min=-0.003430 max=0.003796 Jy/beam
! Clean residual mean=0.000004 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.296787 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.296787 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.421 mas, bmaj=6.544 mas, bpa=37.63 degrees
! Estimated noise=0.460125 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454184 Jy
! Component: 100  -  total flux cleaned = 0.00726397 Jy
! Component: 150  -  total flux cleaned = 0.00905324 Jy
! Component: 200  -  total flux cleaned = 0.0100767 Jy
! Total flux subtracted in 200 components = 0.0100767 Jy
! Clean residual min=-0.002286 max=0.002218 Jy/beam
! Clean residual mean=-0.000001 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.306864 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 42 components and 0.306864 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.847 mas, bmaj=8.462 mas, bpa=12.15 degrees
! Estimated noise=0.531213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000846033 Jy
! Component: 100  -  total flux cleaned = 0.000952876 Jy
! Component: 150  -  total flux cleaned = 0.000994349 Jy
! Component: 200  -  total flux cleaned = 0.000977305 Jy
! Total flux subtracted in 200 components = 0.000977305 Jy
! Clean residual min=-0.002195 max=0.002428 Jy/beam
! Clean residual mean=-0.000003 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.307841 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.71089e-05 Jy
! Component: 100  -  total flux cleaned = 5.2213e-05 Jy
! Component: 150  -  total flux cleaned = 8.6216e-05 Jy
! Component: 200  -  total flux cleaned = 0.000106995 Jy
! Total flux subtracted in 200 components = 0.000106995 Jy
! Clean residual min=-0.002203 max=0.002437 Jy/beam
! Clean residual mean=-0.000003 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.307948 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 94 components and 0.307948 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.421 mas, bmaj=6.544 mas, bpa=37.63 degrees
! Estimated noise=0.460125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.12757e-05 Jy
! Component: 100  -  total flux cleaned = 0.000229517 Jy
! Component: 150  -  total flux cleaned = 0.000333099 Jy
! Component: 200  -  total flux cleaned = 0.000409889 Jy
! Total flux subtracted in 200 components = 0.000409889 Jy
! Clean residual min=-0.002282 max=0.002313 Jy/beam
! Clean residual mean=-0.000002 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.308358 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 108 components and 0.308358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061786Jy  sigma=1.264671
! Fit after  self-cal, rms=0.061787Jy  sigma=1.264640
wmodel /J1438+4418_S_map.mod
! wmodel: Unable to open new model file: /J1438+4418_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1438+4418_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.421 x 6.544 at 37.63 degrees (North through East)
! Clean map  min=-0.0022541  max=0.29493 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1438+4418_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.294926 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000488843 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.497252 0.497252 0.994504 1.98901 3.97802 7.95604 15.9121 31.8241 63.6483
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.294 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  603.315 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1438+4418_S_dfm.log closed on Thu May 19 18:44:06 2016