! Started logfile: /scr/pima/bg219e_uvs/J1423+4802_S_dfm.log on Thu May 19 18:43:13 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1423+4802_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1423+4802_S_uva.fits
! AN table 1: 23 integrations on 36 of 36 possible baselines.
! AN table 2: 24 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.898936 visibilities/baseline/integration-bin.
! Found source: J1423+4802
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6084 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1423+4802_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.045886Jy  sigma=23.719371
! Fit after  self-cal, rms=0.734788Jy  sigma=16.489822
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.596 mas, bmaj=5.763 mas, bpa=37.26 degrees
! Estimated noise=0.611991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.199709 Jy
! Component: 100  -  total flux cleaned = 0.257922 Jy
! Total flux subtracted in 100 components = 0.257922 Jy
! Clean residual min=-0.009126 max=0.024619 Jy/beam
! Clean residual mean=0.000027 rms=0.002958 Jy/beam
! Combined flux in latest and established models = 0.257922 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.257922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079060Jy  sigma=1.756696
! Fit after  self-cal, rms=0.078722Jy  sigma=1.749490
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275229 Jy
! Component: 100  -  total flux cleaned = 0.041494 Jy
! Total flux subtracted in 100 components = 0.041494 Jy
! Clean residual min=-0.006176 max=0.008652 Jy/beam
! Clean residual mean=0.000020 rms=0.001591 Jy/beam
! Combined flux in latest and established models = 0.299416 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.299416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066548Jy  sigma=1.441027
! Fit after  self-cal, rms=0.066347Jy  sigma=1.436556
! Inverting map 
! Added new window around map position (-6, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100852 Jy
! Component: 100  -  total flux cleaned = 0.0170146 Jy
! Total flux subtracted in 100 components = 0.0170146 Jy
! Clean residual min=-0.004777 max=0.005095 Jy/beam
! Clean residual mean=0.000016 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.316431 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 45 components and 0.316431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064129Jy  sigma=1.379761
! Fit after  self-cal, rms=0.064055Jy  sigma=1.378024
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.313 mas, bmaj=6.53 mas, bpa=40.24 degrees
! Estimated noise=0.416213 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0082498 Jy
! Component: 100  -  total flux cleaned = 0.0136228 Jy
! Component: 150  -  total flux cleaned = 0.0174976 Jy
! Component: 200  -  total flux cleaned = 0.0203413 Jy
! Total flux subtracted in 200 components = 0.0203413 Jy
! Clean residual min=-0.003689 max=0.003794 Jy/beam
! Clean residual mean=0.000021 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.336772 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 70 components and 0.336772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062860Jy  sigma=1.345799
! Fit after  self-cal, rms=0.062822Jy  sigma=1.344974
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.313 x 6.53 at 40.24 degrees (North through East)
! Clean map  min=-0.0035347  max=0.26447 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.97     KP        1.00     
!   LA        1.00     NL        0.99     OV        1.00     PT        0.92     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.01     HN        0.95     KP        0.98     
!   LA        1.01     MK        1.09     NL        0.99     OV        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        0.98     KP        1.00     
!   LA        0.97     NL        0.99     OV        1.01     PT        0.99     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.02     HN        0.95     KP        0.99     
!   LA        1.01     MK        1.06     NL        0.98     OV        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        0.99     
!   LA        1.01     NL        1.02     OV        1.01     PT        1.00     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.02     HN        1.01     KP        0.98     
!   LA        1.00     MK        1.10     NL        0.96     OV        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        1.00     
!   LA        1.01     NL        0.94     OV        1.06     PT        1.01     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.06     HN        0.98     KP        0.97     
!   LA        0.99     MK        1.12     NL        0.97     OV        1.00     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.062822Jy  sigma=1.344974
! Fit after  self-cal, rms=0.062034Jy  sigma=1.319646
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.335 mas, bmaj=6.534 mas, bpa=40.32 degrees
! Estimated noise=0.414703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167757 Jy
! Component: 100  -  total flux cleaned = 0.00214776 Jy
! Component: 150  -  total flux cleaned = 0.00259974 Jy
! Component: 200  -  total flux cleaned = 0.00275462 Jy
! Total flux subtracted in 200 components = 0.00275462 Jy
! Clean residual min=-0.002375 max=0.002796 Jy/beam
! Clean residual mean=0.000007 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.339527 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.339527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061969Jy  sigma=1.317609
! Fit after  self-cal, rms=0.061964Jy  sigma=1.317287
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061964Jy  sigma=1.317287
! Fit after  self-cal, rms=0.061967Jy  sigma=1.317048
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.338 mas, bmaj=6.526 mas, bpa=40.35 degrees
! Estimated noise=0.41469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000583958 Jy
! Component: 100  -  total flux cleaned = 0.000998418 Jy
! Component: 150  -  total flux cleaned = 0.00118867 Jy
! Component: 200  -  total flux cleaned = 0.00129325 Jy
! Total flux subtracted in 200 components = 0.00129325 Jy
! Clean residual min=-0.002222 max=0.002565 Jy/beam
! Clean residual mean=0.000007 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.34082 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 92 components and 0.34082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061944Jy  sigma=1.316301
! Fit after  self-cal, rms=0.061937Jy  sigma=1.316208
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012456 Jy
! Component: 100  -  total flux cleaned = 0.00025156 Jy
! Component: 150  -  total flux cleaned = 0.000269565 Jy
! Component: 200  -  total flux cleaned = 0.000286065 Jy
! Total flux subtracted in 200 components = 0.000286065 Jy
! Clean residual min=-0.002163 max=0.002508 Jy/beam
! Clean residual mean=0.000007 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.341106 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.341106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061926Jy  sigma=1.315883
! Fit after  self-cal, rms=0.061922Jy  sigma=1.315834
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061922Jy  sigma=1.315834
! Fit after  self-cal, rms=0.061921Jy  sigma=1.315740
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.34 mas, bmaj=6.521 mas, bpa=40.38 degrees
! Estimated noise=0.414644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243285 Jy
! Component: 100  -  total flux cleaned = 0.000442399 Jy
! Component: 150  -  total flux cleaned = 0.000504406 Jy
! Component: 200  -  total flux cleaned = 0.000546873 Jy
! Total flux subtracted in 200 components = 0.000546873 Jy
! Clean residual min=-0.002158 max=0.002404 Jy/beam
! Clean residual mean=0.000007 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.341653 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 105 components and 0.341653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061913Jy  sigma=1.315454
! Fit after  self-cal, rms=0.061910Jy  sigma=1.315427
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.30345e-05 Jy
! Component: 100  -  total flux cleaned = 9.94288e-05 Jy
! Component: 150  -  total flux cleaned = 0.000123551 Jy
! Component: 200  -  total flux cleaned = 0.000145611 Jy
! Total flux subtracted in 200 components = 0.000145611 Jy
! Clean residual min=-0.002156 max=0.002374 Jy/beam
! Clean residual mean=0.000007 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.341798 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 0.341798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061905Jy  sigma=1.315275
! Fit after  self-cal, rms=0.061904Jy  sigma=1.315258
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061904Jy  sigma=1.315258
! Fit after  self-cal, rms=0.061904Jy  sigma=1.315228
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.033 mas, bmaj=8.37 mas, bpa=31.88 degrees
! Estimated noise=0.479292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000714671 Jy
! Component: 100  -  total flux cleaned = 0.000890759 Jy
! Component: 150  -  total flux cleaned = 0.0009913 Jy
! Component: 200  -  total flux cleaned = 0.00102246 Jy
! Total flux subtracted in 200 components = 0.00102246 Jy
! Clean residual min=-0.003113 max=0.002705 Jy/beam
! Clean residual mean=0.000012 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.342821 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 116 components and 0.342821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061909Jy  sigma=1.315117
! Fit after  self-cal, rms=0.061906Jy  sigma=1.315087
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.84965e-05 Jy
! Component: 100  -  total flux cleaned = 6.02768e-05 Jy
! Component: 150  -  total flux cleaned = 9.61392e-05 Jy
! Component: 200  -  total flux cleaned = 0.000120094 Jy
! Total flux subtracted in 200 components = 0.000120094 Jy
! Clean residual min=-0.003117 max=0.002677 Jy/beam
! Clean residual mean=0.000012 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.342941 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 121 components and 0.342941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061908Jy  sigma=1.315079
! Fit after  self-cal, rms=0.061907Jy  sigma=1.315067
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.341 mas, bmaj=6.518 mas, bpa=40.41 degrees
! Estimated noise=0.414603 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.341 x 6.518 at 40.41 degrees (North through East)
! Clean map  min=-0.0022028  max=0.26335 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.629 mas, bmaj=5.748 mas, bpa=37.32 degrees
! Estimated noise=0.611406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.199291 Jy
! Component: 100  -  total flux cleaned = 0.25892 Jy
! Component: 150  -  total flux cleaned = 0.285733 Jy
! Component: 200  -  total flux cleaned = 0.30048 Jy
! Total flux subtracted in 200 components = 0.30048 Jy
! Clean residual min=-0.005108 max=0.007730 Jy/beam
! Clean residual mean=0.000015 rms=0.001377 Jy/beam
! Combined flux in latest and established models = 0.30048 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.30048 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.341 mas, bmaj=6.518 mas, bpa=40.41 degrees
! Estimated noise=0.414603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133191 Jy
! Component: 100  -  total flux cleaned = 0.0213776 Jy
! Component: 150  -  total flux cleaned = 0.0268188 Jy
! Component: 200  -  total flux cleaned = 0.030614 Jy
! Total flux subtracted in 200 components = 0.030614 Jy
! Clean residual min=-0.002732 max=0.002712 Jy/beam
! Clean residual mean=0.000020 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.331094 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 72 components and 0.331094 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.033 mas, bmaj=8.37 mas, bpa=31.88 degrees
! Estimated noise=0.479292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00420493 Jy
! Component: 100  -  total flux cleaned = 0.0067646 Jy
! Component: 150  -  total flux cleaned = 0.0084337 Jy
! Component: 200  -  total flux cleaned = 0.00955067 Jy
! Total flux subtracted in 200 components = 0.00955067 Jy
! Clean residual min=-0.003105 max=0.002681 Jy/beam
! Clean residual mean=0.000017 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.340645 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000755145 Jy
! Component: 100  -  total flux cleaned = 0.00126732 Jy
! Component: 150  -  total flux cleaned = 0.0016154 Jy
! Component: 200  -  total flux cleaned = 0.00185208 Jy
! Total flux subtracted in 200 components = 0.00185208 Jy
! Clean residual min=-0.003114 max=0.002685 Jy/beam
! Clean residual mean=0.000013 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.342497 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 136 components and 0.342496 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.341 mas, bmaj=6.518 mas, bpa=40.41 degrees
! Estimated noise=0.414603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000337362 Jy
! Component: 100  -  total flux cleaned = -0.000277275 Jy
! Component: 150  -  total flux cleaned = -0.000259855 Jy
! Component: 200  -  total flux cleaned = -0.000259636 Jy
! Total flux subtracted in 200 components = -0.000259636 Jy
! Clean residual min=-0.002231 max=0.002342 Jy/beam
! Clean residual mean=0.000007 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.342237 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 146 components and 0.342237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061905Jy  sigma=1.315158
! Fit after  self-cal, rms=0.061902Jy  sigma=1.315106
wmodel /J1423+4802_S_map.mod
! wmodel: Unable to open new model file: /J1423+4802_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1423+4802_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.341 x 6.518 at 40.41 degrees (North through East)
! Clean map  min=-0.0021532  max=0.26319 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1423+4802_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.26319 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000581303 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.662605 0.662605 1.32521 2.65042 5.30084 10.6017 21.2034 42.4067 84.8135
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.263 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  452.758 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1423+4802_S_dfm.log closed on Thu May 19 18:43:16 2016