! Started logfile: /scr/pima/bg219e_uvs/J1400+0425_X_dfm.log on Thu May 19 18:43:01 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1400+0425_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1400+0425_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.778506 visibilities/baseline/integration-bin.
! Found source: J1400+0425
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25644 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1400+0425_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007942Jy  sigma=23.800083
! Fit after  self-cal, rms=0.909893Jy  sigma=21.452181
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8369 mas, bmaj=1.822 mas, bpa=6.738 degrees
! Estimated noise=0.429449 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0666632 Jy
! Component: 100  -  total flux cleaned = 0.0849838 Jy
! Total flux subtracted in 100 components = 0.0849838 Jy
! Clean residual min=-0.004469 max=0.008243 Jy/beam
! Clean residual mean=0.000003 rms=0.001056 Jy/beam
! Combined flux in latest and established models = 0.0849839 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0849839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064360Jy  sigma=1.453129
! Fit after  self-cal, rms=0.063899Jy  sigma=1.440107
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00971646 Jy
! Component: 100  -  total flux cleaned = 0.0151346 Jy
! Total flux subtracted in 100 components = 0.0151346 Jy
! Clean residual min=-0.003158 max=0.003864 Jy/beam
! Clean residual mean=0.000001 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.100118 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.100118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061829Jy  sigma=1.387314
! Fit after  self-cal, rms=0.061836Jy  sigma=1.386903
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.019 mas, bmaj=2.143 mas, bpa=7.529 degrees
! Estimated noise=0.201292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00644029 Jy
! Component: 100  -  total flux cleaned = 0.0103478 Jy
! Component: 150  -  total flux cleaned = 0.0130068 Jy
! Component: 200  -  total flux cleaned = 0.0149161 Jy
! Total flux subtracted in 200 components = 0.0149161 Jy
! Clean residual min=-0.002509 max=0.004882 Jy/beam
! Clean residual mean=-0.000001 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.115035 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 34 components and 0.115035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061096Jy  sigma=1.368595
! Fit after  self-cal, rms=0.061057Jy  sigma=1.367274
! Inverting map 
! Added new window around map position (-4.6, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045858 Jy
! Component: 100  -  total flux cleaned = 0.0069692 Jy
! Component: 150  -  total flux cleaned = 0.00859139 Jy
! Component: 200  -  total flux cleaned = 0.00982502 Jy
! Total flux subtracted in 200 components = 0.00982502 Jy
! Clean residual min=-0.001782 max=0.001523 Jy/beam
! Clean residual mean=-0.000001 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.12486 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 63 components and 0.12486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060721Jy  sigma=1.358221
! Fit after  self-cal, rms=0.060677Jy  sigma=1.357177
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.019 x 2.143 at 7.529 degrees (North through East)
! Clean map  min=-0.0015762  max=0.091422 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.06     OV        1.01     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        0.98     
!   LA        0.99     MK        1.07     NL        1.04     OV        0.98     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.07     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        1.07     
!   LA        0.98     MK        0.98     NL        1.03     OV        0.97     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        1.01     
!   LA        0.97     MK        1.04     NL        0.99     OV        1.01     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.99     KP        1.01     
!   LA        1.02     MK        0.97     NL        0.99     OV        1.00     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.03     KP        0.97     
!   LA        1.02     MK        1.20     NL        1.00     OV        0.96     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.01     KP        1.01     
!   LA        0.99     MK        1.04     NL        0.98     OV        1.02     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.95     KP        0.96     
!   LA        0.96     MK        1.07     NL        1.08     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.95     KP        1.03     
!   LA        0.98     MK        0.97     NL        1.04     OV        1.04     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.93     KP        1.03     
!   LA        1.01     MK        1.00     NL        1.06     OV        0.99     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.06     KP        0.99     
!   LA        0.97     MK        1.05     NL        0.99     OV        1.05     
!   PT        1.02     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.060677Jy  sigma=1.357177
! Fit after  self-cal, rms=0.060244Jy  sigma=1.354141
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=2.153 mas, bpa=7.754 degrees
! Estimated noise=0.200456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134291 Jy
! Component: 100  -  total flux cleaned = 0.00211815 Jy
! Component: 150  -  total flux cleaned = 0.00252865 Jy
! Component: 200  -  total flux cleaned = 0.00268446 Jy
! Total flux subtracted in 200 components = 0.00268446 Jy
! Clean residual min=-0.001397 max=0.001350 Jy/beam
! Clean residual mean=-0.000001 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.127544 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 81 components and 0.127544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060211Jy  sigma=1.353342
! Fit after  self-cal, rms=0.060214Jy  sigma=1.353161
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060214Jy  sigma=1.353161
! Fit after  self-cal, rms=0.060226Jy  sigma=1.350572
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=2.156 mas, bpa=7.643 degrees
! Estimated noise=0.20065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000781342 Jy
! Component: 100  -  total flux cleaned = 0.00110187 Jy
! Component: 150  -  total flux cleaned = 0.00123654 Jy
! Component: 200  -  total flux cleaned = 0.00127218 Jy
! Total flux subtracted in 200 components = 0.00127218 Jy
! Clean residual min=-0.001165 max=0.001280 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.128816 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 0.128816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060214Jy  sigma=1.350300
! Fit after  self-cal, rms=0.060218Jy  sigma=1.350218
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (34.4, -26.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119268 Jy
! Component: 100  -  total flux cleaned = 0.00161288 Jy
! Component: 150  -  total flux cleaned = 0.00184364 Jy
! Component: 200  -  total flux cleaned = 0.00207422 Jy
! Total flux subtracted in 200 components = 0.00207422 Jy
! Clean residual min=-0.001143 max=0.001165 Jy/beam
! Clean residual mean=-0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.13089 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 117 components and 0.13089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060192Jy  sigma=1.349613
! Fit after  self-cal, rms=0.060189Jy  sigma=1.349567
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060189Jy  sigma=1.349567
! Fit after  self-cal, rms=0.060299Jy  sigma=1.349504
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=2.158 mas, bpa=7.593 degrees
! Estimated noise=0.200933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000486541 Jy
! Component: 100  -  total flux cleaned = 0.000722573 Jy
! Component: 150  -  total flux cleaned = 0.000910036 Jy
! Component: 200  -  total flux cleaned = 0.00110393 Jy
! Total flux subtracted in 200 components = 0.00110393 Jy
! Clean residual min=-0.001106 max=0.001152 Jy/beam
! Clean residual mean=-0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.131994 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 124 components and 0.131994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060291Jy  sigma=1.349324
! Fit after  self-cal, rms=0.060288Jy  sigma=1.349235
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265411 Jy
! Component: 100  -  total flux cleaned = 0.000410676 Jy
! Component: 150  -  total flux cleaned = 0.000489347 Jy
! Component: 200  -  total flux cleaned = 0.000553615 Jy
! Total flux subtracted in 200 components = 0.000553615 Jy
! Clean residual min=-0.001104 max=0.001127 Jy/beam
! Clean residual mean=-0.000000 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.132548 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 133 components and 0.132548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060283Jy  sigma=1.349143
! Fit after  self-cal, rms=0.060283Jy  sigma=1.349138
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060283Jy  sigma=1.349138
! Fit after  self-cal, rms=0.060368Jy  sigma=1.349119
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.257 mas, bpa=2.763 degrees
! Estimated noise=0.243866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147498 Jy
! Component: 100  -  total flux cleaned = 0.000261279 Jy
! Component: 150  -  total flux cleaned = 0.000347427 Jy
! Component: 200  -  total flux cleaned = 0.00041259 Jy
! Total flux subtracted in 200 components = 0.00041259 Jy
! Clean residual min=-0.001241 max=0.001310 Jy/beam
! Clean residual mean=-0.000001 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.132961 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 156 components and 0.132961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060365Jy  sigma=1.349059
! Fit after  self-cal, rms=0.060365Jy  sigma=1.349056
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101773 Jy
! Component: 100  -  total flux cleaned = 0.000150923 Jy
! Component: 150  -  total flux cleaned = 0.000213609 Jy
! Component: 200  -  total flux cleaned = 0.000262884 Jy
! Total flux subtracted in 200 components = 0.000262884 Jy
! Clean residual min=-0.001213 max=0.001296 Jy/beam
! Clean residual mean=-0.000001 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.133223 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 169 components and 0.133223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060364Jy  sigma=1.349032
! Fit after  self-cal, rms=0.060363Jy  sigma=1.349027
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=2.159 mas, bpa=7.582 degrees
! Estimated noise=0.201158 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.024 x 2.159 at 7.582 degrees (North through East)
! Clean map  min=-0.0010505  max=0.09101 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8397 mas, bmaj=1.834 mas, bpa=6.726 degrees
! Estimated noise=0.43086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.066834 Jy
! Component: 100  -  total flux cleaned = 0.0854241 Jy
! Component: 150  -  total flux cleaned = 0.0948939 Jy
! Component: 200  -  total flux cleaned = 0.100843 Jy
! Total flux subtracted in 200 components = 0.100843 Jy
! Clean residual min=-0.002882 max=0.003446 Jy/beam
! Clean residual mean=0.000001 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.100843 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.100843 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=2.159 mas, bpa=7.582 degrees
! Estimated noise=0.201158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00735073 Jy
! Component: 100  -  total flux cleaned = 0.012439 Jy
! Component: 150  -  total flux cleaned = 0.0161053 Jy
! Component: 200  -  total flux cleaned = 0.0187982 Jy
! Total flux subtracted in 200 components = 0.0187982 Jy
! Clean residual min=-0.001684 max=0.001671 Jy/beam
! Clean residual mean=-0.000001 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.119641 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 42 components and 0.119641 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.257 mas, bpa=2.763 degrees
! Estimated noise=0.243866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328185 Jy
! Component: 100  -  total flux cleaned = 0.00544992 Jy
! Component: 150  -  total flux cleaned = 0.00708059 Jy
! Component: 200  -  total flux cleaned = 0.00833859 Jy
! Total flux subtracted in 200 components = 0.00833859 Jy
! Clean residual min=-0.001505 max=0.001482 Jy/beam
! Clean residual mean=-0.000001 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.12798 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100368 Jy
! Component: 100  -  total flux cleaned = 0.00182819 Jy
! Component: 150  -  total flux cleaned = 0.00235789 Jy
! Component: 200  -  total flux cleaned = 0.00279261 Jy
! Total flux subtracted in 200 components = 0.00279261 Jy
! Clean residual min=-0.001273 max=0.001320 Jy/beam
! Clean residual mean=-0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.130772 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 131 components and 0.130772 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=2.159 mas, bpa=7.582 degrees
! Estimated noise=0.201158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000566722 Jy
! Component: 100  -  total flux cleaned = 0.000997196 Jy
! Component: 150  -  total flux cleaned = 0.00134803 Jy
! Component: 200  -  total flux cleaned = 0.00162237 Jy
! Total flux subtracted in 200 components = 0.00162237 Jy
! Clean residual min=-0.001073 max=0.001178 Jy/beam
! Clean residual mean=-0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.132395 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 152 components and 0.132395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060381Jy  sigma=1.349439
! Fit after  self-cal, rms=0.060379Jy  sigma=1.349356
wmodel /J1400+0425_X_map.mod
! wmodel: Unable to open new model file: /J1400+0425_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1400+0425_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.024 x 2.159 at 7.582 degrees (North through East)
! Clean map  min=-0.0010154  max=0.090921 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1400+0425_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0909209 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00026705 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.881151 0.881151 1.7623 3.5246 7.04921 14.0984 28.1968 56.3937
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.09 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  340.463 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1400+0425_X_dfm.log closed on Thu May 19 18:43:04 2016