! Started logfile: /scr/pima/bg219e_uvs/J1353+0151_S_dfm.log on Thu May 19 18:42:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1353+0151_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1353+0151_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.735673 visibilities/baseline/integration-bin.
! Found source: J1353+0151
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7548 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1353+0151_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008367Jy  sigma=21.623354
! Fit after  self-cal, rms=0.915507Jy  sigma=19.544243
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.116 mas, bmaj=7.333 mas, bpa=5.112 degrees
! Estimated noise=0.602502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0651401 Jy
! Component: 100  -  total flux cleaned = 0.0892021 Jy
! Total flux subtracted in 100 components = 0.0892021 Jy
! Clean residual min=-0.007720 max=0.017680 Jy/beam
! Clean residual mean=0.000016 rms=0.002637 Jy/beam
! Combined flux in latest and established models = 0.0892021 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0892021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081335Jy  sigma=1.721478
! Fit after  self-cal, rms=0.079993Jy  sigma=1.696511
! Inverting map 
! Added new window around map position (-3.5, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178575 Jy
! Component: 100  -  total flux cleaned = 0.0290715 Jy
! Total flux subtracted in 100 components = 0.0290715 Jy
! Clean residual min=-0.006806 max=0.010209 Jy/beam
! Clean residual mean=0.000005 rms=0.002069 Jy/beam
! Combined flux in latest and established models = 0.118274 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 37 components and 0.118274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074499Jy  sigma=1.566056
! Fit after  self-cal, rms=0.074103Jy  sigma=1.559557
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.894 mas, bmaj=8.433 mas, bpa=3.932 degrees
! Estimated noise=0.392639 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131498 Jy
! Component: 100  -  total flux cleaned = 0.0209439 Jy
! Component: 150  -  total flux cleaned = 0.0261248 Jy
! Component: 200  -  total flux cleaned = 0.0296469 Jy
! Total flux subtracted in 200 components = 0.0296469 Jy
! Clean residual min=-0.006921 max=0.010792 Jy/beam
! Clean residual mean=-0.000002 rms=0.002232 Jy/beam
! Combined flux in latest and established models = 0.14792 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 79 components and 0.14792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071659Jy  sigma=1.502159
! Fit after  self-cal, rms=0.071412Jy  sigma=1.498389
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.894 x 8.433 at 3.932 degrees (North through East)
! Clean map  min=-0.0070574  max=0.084686 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.90     HN        1.02     KP        0.94     
!   LA        1.04     MK        0.97     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.89     HN        1.02     KP        0.93     
!   LA        1.04     MK        1.00     NL        0.95     OV        0.94     
!   PT        1.14     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.88     HN        1.07     KP        0.94     
!   LA        1.05     MK        1.00     NL        0.98     OV        0.94     
!   PT        1.15     SC        1.12     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.92     HN        1.08     KP        0.92     
!   LA        1.05     MK        1.19     NL        0.99     OV        0.99     
!   PT        1.05     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.071412Jy  sigma=1.498389
! Fit after  self-cal, rms=0.071066Jy  sigma=1.484912
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.979 mas, bmaj=8.548 mas, bpa=3.574 degrees
! Estimated noise=0.386049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13, -18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00982533 Jy
! Component: 100  -  total flux cleaned = 0.0119598 Jy
! Component: 150  -  total flux cleaned = 0.012377 Jy
! Component: 200  -  total flux cleaned = 0.0124961 Jy
! Total flux subtracted in 200 components = 0.0124961 Jy
! Clean residual min=-0.005545 max=0.006607 Jy/beam
! Clean residual mean=0.000008 rms=0.001679 Jy/beam
! Combined flux in latest and established models = 0.160417 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 118 components and 0.160417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069717Jy  sigma=1.452548
! Fit after  self-cal, rms=0.069456Jy  sigma=1.446337
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069456Jy  sigma=1.446337
! Fit after  self-cal, rms=0.067718Jy  sigma=1.434166
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.995 mas, bmaj=8.585 mas, bpa=3.935 degrees
! Estimated noise=0.37729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00169622 Jy
! Component: 100  -  total flux cleaned = -0.00182911 Jy
! Component: 150  -  total flux cleaned = -0.00208719 Jy
! Component: 200  -  total flux cleaned = -0.00238262 Jy
! Total flux subtracted in 200 components = -0.00238262 Jy
! Clean residual min=-0.004627 max=0.005759 Jy/beam
! Clean residual mean=0.000002 rms=0.001427 Jy/beam
! Combined flux in latest and established models = 0.158034 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 134 components and 0.158034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067369Jy  sigma=1.425232
! Fit after  self-cal, rms=0.067306Jy  sigma=1.424058
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-84.5, 48).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00569835 Jy
! Component: 100  -  total flux cleaned = 0.00862276 Jy
! Component: 150  -  total flux cleaned = 0.00908759 Jy
! Component: 200  -  total flux cleaned = 0.0094033 Jy
! Total flux subtracted in 200 components = 0.0094033 Jy
! Clean residual min=-0.004403 max=0.004635 Jy/beam
! Clean residual mean=0.000001 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.167437 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 188 components and 0.167437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066821Jy  sigma=1.410810
! Fit after  self-cal, rms=0.066732Jy  sigma=1.408341
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066732Jy  sigma=1.408341
! Fit after  self-cal, rms=0.065589Jy  sigma=1.406905
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=8.599 mas, bpa=4.086 degrees
! Estimated noise=0.370251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.3922e-06 Jy
! Component: 100  -  total flux cleaned = 0.000909341 Jy
! Component: 150  -  total flux cleaned = 0.00151141 Jy
! Component: 200  -  total flux cleaned = 0.00170322 Jy
! Total flux subtracted in 200 components = 0.00170322 Jy
! Clean residual min=-0.003981 max=0.004199 Jy/beam
! Clean residual mean=0.000001 rms=0.001089 Jy/beam
! Combined flux in latest and established models = 0.169141 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 219 components and 0.169141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065390Jy  sigma=1.401369
! Fit after  self-cal, rms=0.065364Jy  sigma=1.400668
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103874 Jy
! Component: 100  -  total flux cleaned = 0.00142657 Jy
! Component: 150  -  total flux cleaned = 0.00159528 Jy
! Component: 200  -  total flux cleaned = 0.00189779 Jy
! Total flux subtracted in 200 components = 0.00189779 Jy
! Clean residual min=-0.003942 max=0.004180 Jy/beam
! Clean residual mean=0.000001 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.171038 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 246 components and 0.171038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065269Jy  sigma=1.398064
! Fit after  self-cal, rms=0.065260Jy  sigma=1.397722
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065260Jy  sigma=1.397722
! Fit after  self-cal, rms=0.064702Jy  sigma=1.397142
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.802 mas, bmaj=12.3 mas, bpa=0.7826 degrees
! Estimated noise=0.414575 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000724903 Jy
! Component: 100  -  total flux cleaned = -0.000402223 Jy
! Component: 150  -  total flux cleaned = -0.000141588 Jy
! Component: 200  -  total flux cleaned = 2.0999e-05 Jy
! Total flux subtracted in 200 components = 2.0999e-05 Jy
! Clean residual min=-0.005047 max=0.004964 Jy/beam
! Clean residual mean=0.000004 rms=0.001426 Jy/beam
! Combined flux in latest and established models = 0.171059 Jy
selfcal
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 275 components and 0.171059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064629Jy  sigma=1.394796
! Fit after  self-cal, rms=0.064617Jy  sigma=1.394320
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000661235 Jy
! Component: 100  -  total flux cleaned = 0.00115394 Jy
! Component: 150  -  total flux cleaned = 0.00129661 Jy
! Component: 200  -  total flux cleaned = 0.00146961 Jy
! Total flux subtracted in 200 components = 0.00146961 Jy
! Clean residual min=-0.004936 max=0.004818 Jy/beam
! Clean residual mean=0.000005 rms=0.001373 Jy/beam
! Combined flux in latest and established models = 0.172529 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 288 components and 0.172529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064587Jy  sigma=1.393345
! Fit after  self-cal, rms=0.064581Jy  sigma=1.393085
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=8.612 mas, bpa=4.168 degrees
! Estimated noise=0.366074 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.015 x 8.612 at 4.168 degrees (North through East)
! Clean map  min=-0.0038094  max=0.078149 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.214 mas, bmaj=7.486 mas, bpa=5.462 degrees
! Estimated noise=0.574281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0629702 Jy
! Component: 100  -  total flux cleaned = 0.0893174 Jy
! Component: 150  -  total flux cleaned = 0.105628 Jy
! Component: 200  -  total flux cleaned = 0.117754 Jy
! Total flux subtracted in 200 components = 0.117754 Jy
! Clean residual min=-0.005471 max=0.007167 Jy/beam
! Clean residual mean=0.000005 rms=0.001706 Jy/beam
! Combined flux in latest and established models = 0.117754 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.117754 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=8.612 mas, bpa=4.168 degrees
! Estimated noise=0.366074 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129322 Jy
! Component: 100  -  total flux cleaned = 0.0220292 Jy
! Component: 150  -  total flux cleaned = 0.0290348 Jy
! Component: 200  -  total flux cleaned = 0.0345747 Jy
! Total flux subtracted in 200 components = 0.0345747 Jy
! Clean residual min=-0.004431 max=0.006172 Jy/beam
! Clean residual mean=0.000001 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.152328 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 113 components and 0.152328 Jy
! Inverting map 
! Added new window around map position (-70, 63.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573473 Jy
! Component: 100  -  total flux cleaned = 0.009568 Jy
! Component: 150  -  total flux cleaned = 0.0122119 Jy
! Component: 200  -  total flux cleaned = 0.0142488 Jy
! Total flux subtracted in 200 components = 0.0142488 Jy
! Clean residual min=-0.003584 max=0.003979 Jy/beam
! Clean residual mean=0.000001 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.166577 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 164 components and 0.166577 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.802 mas, bmaj=12.3 mas, bpa=0.7826 degrees
! Estimated noise=0.414575 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034444 Jy
! Component: 100  -  total flux cleaned = 0.00561149 Jy
! Component: 150  -  total flux cleaned = 0.00683023 Jy
! Component: 200  -  total flux cleaned = 0.00765384 Jy
! Total flux subtracted in 200 components = 0.00765384 Jy
! Clean residual min=-0.004077 max=0.004638 Jy/beam
! Clean residual mean=0.000002 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.174231 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000428749 Jy
! Component: 100  -  total flux cleaned = 0.000767467 Jy
! Component: 150  -  total flux cleaned = 0.00102978 Jy
! Component: 200  -  total flux cleaned = 0.00127682 Jy
! Total flux subtracted in 200 components = 0.00127682 Jy
! Clean residual min=-0.004095 max=0.004461 Jy/beam
! Clean residual mean=0.000002 rms=0.001193 Jy/beam
! Combined flux in latest and established models = 0.175508 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 246 components and 0.175508 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.015 mas, bmaj=8.612 mas, bpa=4.168 degrees
! Estimated noise=0.366074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000693039 Jy
! Component: 100  -  total flux cleaned = -0.000762537 Jy
! Component: 150  -  total flux cleaned = -0.000704802 Jy
! Component: 200  -  total flux cleaned = -0.000442764 Jy
! Total flux subtracted in 200 components = -0.000442764 Jy
! Clean residual min=-0.003457 max=0.003453 Jy/beam
! Clean residual mean=0.000001 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.175065 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 272 components and 0.175065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064503Jy  sigma=1.389632
! Fit after  self-cal, rms=0.064394Jy  sigma=1.387586
wmodel /J1353+0151_S_map.mod
! wmodel: Unable to open new model file: /J1353+0151_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1353+0151_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.015 x 8.612 at 4.168 degrees (North through East)
! Clean map  min=-0.0032479  max=0.074621 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1353+0151_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0746214 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000835884 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.3605 3.3605 6.721 13.442 26.884 53.768
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.074 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  89.272 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1353+0151_S_dfm.log closed on Thu May 19 18:42:44 2016