! Started logfile: /scr/pima/bg219e_uvs/J1351+0830_X_uvs.log on Thu Apr  7 09:10:27 2016
obs /scr/pima/bg219e_uvs/J1351+0830_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1351+0830_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! AN table 2: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.87004 visibilities/baseline/integration-bin.
! Found source: J1351+0830
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10524 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1351+0830_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 21 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.017202Jy  sigma=24.131668
! Fit after  self-cal, rms=0.775223Jy  sigma=18.334138
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7922 mas, bmaj=1.896 mas, bpa=7.307 degrees
! Estimated noise=0.631443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170976 Jy
! Component: 100  -  total flux cleaned = 0.219354 Jy
! Total flux subtracted in 100 components = 0.219354 Jy
! Clean residual min=-0.009459 max=0.020690 Jy/beam
! Clean residual mean=0.000006 rms=0.002636 Jy/beam
! Combined flux in latest and established models = 0.219353 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.219353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072142Jy  sigma=1.674210
! Fit after  self-cal, rms=0.071763Jy  sigma=1.666372
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0234057 Jy
! Component: 100  -  total flux cleaned = 0.0363555 Jy
! Total flux subtracted in 100 components = 0.0363555 Jy
! Clean residual min=-0.005745 max=0.009012 Jy/beam
! Clean residual mean=0.000003 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.255709 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.255709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062382Jy  sigma=1.434213
! Fit after  self-cal, rms=0.062250Jy  sigma=1.431440
! Inverting map 
! Added new window around map position (0.2, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00960702 Jy
! Component: 100  -  total flux cleaned = 0.0156079 Jy
! Total flux subtracted in 100 components = 0.0156079 Jy
! Clean residual min=-0.004646 max=0.005180 Jy/beam
! Clean residual mean=0.000002 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.271317 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.271317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060351Jy  sigma=1.383835
! Fit after  self-cal, rms=0.060279Jy  sigma=1.382423
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9425 mas, bmaj=2.143 mas, bpa=8.597 degrees
! Estimated noise=0.4259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00618598 Jy
! Component: 100  -  total flux cleaned = 0.00987587 Jy
! Component: 150  -  total flux cleaned = 0.012329 Jy
! Component: 200  -  total flux cleaned = 0.0140293 Jy
! Total flux subtracted in 200 components = 0.0140293 Jy
! Clean residual min=-0.003391 max=0.003176 Jy/beam
! Clean residual mean=0.000002 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.285346 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 43 components and 0.285346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059609Jy  sigma=1.365351
! Fit after  self-cal, rms=0.059571Jy  sigma=1.364596
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9425 x 2.143 at 8.597 degrees (North through East)
! Clean map  min=-0.0030974  max=0.22469 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        1.04     KP        1.00     
!   LA        1.00     NL        1.02     OV        0.98     PT        1.04     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.01     
!   LA        0.97     MK        0.96     NL        1.01     OV        0.97     
!   SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.07     KP        1.01     
!   LA        1.00     NL        1.00     OV        0.99     PT        1.02     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     HN        0.99     KP        1.03     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.05     KP        0.97     
!   LA        0.97     NL        1.00     OV        1.01     PT        1.03     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.94     HN        1.01     KP        1.03     
!   LA        0.95     MK        1.01     NL        1.01     OV        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        0.97     
!   LA        0.97     NL        1.01     OV        0.98     PT        1.03     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.00     HN        0.97     KP        0.98     
!   LA        0.99     MK        0.98     NL        1.02     OV        0.99     
!   SC        1.06     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.97     NL        0.98     OV        1.00     PT        1.01     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.96     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.06     NL        0.98     OV        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.01     KP        0.98     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.89     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.00     HN        0.96     KP        0.95     
!   LA        0.99     MK        1.08     NL        1.03     OV        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.01     KP        1.03     
!   LA        1.00     NL        1.00     OV        1.01     PT        1.04     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.93     HN        0.95     KP        1.04     
!   LA        0.98     MK        1.04     NL        0.99     OV        0.99     
!   SC        1.02     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059571Jy  sigma=1.364596
! Fit after  self-cal, rms=0.058806Jy  sigma=1.344679
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9449 mas, bmaj=2.152 mas, bpa=8.648 degrees
! Estimated noise=0.425375 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000317517 Jy
! Component: 100  -  total flux cleaned = 0.000187652 Jy
! Component: 150  -  total flux cleaned = 0.000103764 Jy
! Component: 200  -  total flux cleaned = 6.86813e-06 Jy
! Total flux subtracted in 200 components = 6.86813e-06 Jy
! Clean residual min=-0.002862 max=0.002552 Jy/beam
! Clean residual mean=0.000001 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.285353 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 52 components and 0.285353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058771Jy  sigma=1.343672
! Fit after  self-cal, rms=0.058767Jy  sigma=1.343430
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058767Jy  sigma=1.343430
! Fit after  self-cal, rms=0.058740Jy  sigma=1.343395
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9449 mas, bmaj=2.152 mas, bpa=8.678 degrees
! Estimated noise=0.425181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110684 Jy
! Component: 100  -  total flux cleaned = -6.42156e-05 Jy
! Component: 150  -  total flux cleaned = -6.33338e-05 Jy
! Component: 200  -  total flux cleaned = -8.09821e-05 Jy
! Total flux subtracted in 200 components = -8.09821e-05 Jy
! Clean residual min=-0.002771 max=0.002485 Jy/beam
! Clean residual mean=0.000001 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.285272 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 0.285272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058723Jy  sigma=1.342862
! Fit after  self-cal, rms=0.058715Jy  sigma=1.342745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.66307e-05 Jy
! Component: 100  -  total flux cleaned = -2.21534e-05 Jy
! Component: 150  -  total flux cleaned = -6.61022e-06 Jy
! Component: 200  -  total flux cleaned = 7.72635e-06 Jy
! Total flux subtracted in 200 components = 7.72635e-06 Jy
! Clean residual min=-0.002724 max=0.002455 Jy/beam
! Clean residual mean=0.000001 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.28528 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 56 components and 0.28528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058704Jy  sigma=1.342419
! Fit after  self-cal, rms=0.058699Jy  sigma=1.342337
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058699Jy  sigma=1.342337
! Fit after  self-cal, rms=0.058699Jy  sigma=1.342329
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9449 mas, bmaj=2.152 mas, bpa=8.686 degrees
! Estimated noise=0.425197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.05591e-05 Jy
! Component: 100  -  total flux cleaned = 8.6767e-05 Jy
! Component: 150  -  total flux cleaned = 7.40093e-05 Jy
! Component: 200  -  total flux cleaned = 9.99027e-05 Jy
! Total flux subtracted in 200 components = 9.99027e-05 Jy
! Clean residual min=-0.002693 max=0.002464 Jy/beam
! Clean residual mean=0.000001 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.28538 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.28538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058692Jy  sigma=1.342089
! Fit after  self-cal, rms=0.058687Jy  sigma=1.342030
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.82241e-05 Jy
! Component: 100  -  total flux cleaned = 1.8853e-05 Jy
! Component: 150  -  total flux cleaned = 1.91069e-05 Jy
! Component: 200  -  total flux cleaned = 3.03752e-05 Jy
! Total flux subtracted in 200 components = 3.03752e-05 Jy
! Clean residual min=-0.002668 max=0.002467 Jy/beam
! Clean residual mean=0.000001 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.28541 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 58 components and 0.28541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058682Jy  sigma=1.341859
! Fit after  self-cal, rms=0.058679Jy  sigma=1.341821
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058679Jy  sigma=1.341821
! Fit after  self-cal, rms=0.058689Jy  sigma=1.341819
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.022 mas, bmaj=2.958 mas, bpa=2.744 degrees
! Estimated noise=0.53173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000268035 Jy
! Component: 100  -  total flux cleaned = 0.000326226 Jy
! Component: 150  -  total flux cleaned = 0.000326122 Jy
! Component: 200  -  total flux cleaned = 0.000297603 Jy
! Total flux subtracted in 200 components = 0.000297603 Jy
! Clean residual min=-0.003056 max=0.003700 Jy/beam
! Clean residual mean=0.000003 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.285708 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 62 components and 0.285708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058691Jy  sigma=1.341756
! Fit after  self-cal, rms=0.058686Jy  sigma=1.341699
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.2, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210677 Jy
! Component: 100  -  total flux cleaned = 0.00295728 Jy
! Component: 150  -  total flux cleaned = 0.00347474 Jy
! Component: 200  -  total flux cleaned = 0.00367945 Jy
! Total flux subtracted in 200 components = 0.00367945 Jy
! Clean residual min=-0.002430 max=0.002638 Jy/beam
! Clean residual mean=0.000003 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.289387 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 88 components and 0.289387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058567Jy  sigma=1.339030
! Fit after  self-cal, rms=0.058560Jy  sigma=1.338868
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9447 mas, bmaj=2.152 mas, bpa=8.687 degrees
! Estimated noise=0.425303 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9447 x 2.152 at 8.687 degrees (North through East)
! Clean map  min=-0.0023024  max=0.22431 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7938 mas, bmaj=1.901 mas, bpa=7.394 degrees
! Estimated noise=0.63437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.171423 Jy
! Component: 100  -  total flux cleaned = 0.222093 Jy
! Component: 150  -  total flux cleaned = 0.245704 Jy
! Component: 200  -  total flux cleaned = 0.259128 Jy
! Total flux subtracted in 200 components = 0.259128 Jy
! Clean residual min=-0.005276 max=0.007133 Jy/beam
! Clean residual mean=0.000002 rms=0.001339 Jy/beam
! Combined flux in latest and established models = 0.259128 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.259128 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9447 mas, bmaj=2.152 mas, bpa=8.687 degrees
! Estimated noise=0.425303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010175 Jy
! Component: 100  -  total flux cleaned = 0.0163852 Jy
! Component: 150  -  total flux cleaned = 0.0202072 Jy
! Component: 200  -  total flux cleaned = 0.0224811 Jy
! Total flux subtracted in 200 components = 0.0224811 Jy
! Clean residual min=-0.002982 max=0.002966 Jy/beam
! Clean residual mean=0.000002 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.281609 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 44 components and 0.281609 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.022 mas, bmaj=2.958 mas, bpa=2.744 degrees
! Estimated noise=0.53173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292578 Jy
! Component: 100  -  total flux cleaned = 0.00426352 Jy
! Component: 150  -  total flux cleaned = 0.00495361 Jy
! Component: 200  -  total flux cleaned = 0.0056858 Jy
! Total flux subtracted in 200 components = 0.0056858 Jy
! Clean residual min=-0.002546 max=0.002721 Jy/beam
! Clean residual mean=0.000003 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.287295 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000487048 Jy
! Component: 100  -  total flux cleaned = 0.000917853 Jy
! Component: 150  -  total flux cleaned = 0.0013111 Jy
! Component: 200  -  total flux cleaned = 0.00163695 Jy
! Total flux subtracted in 200 components = 0.00163695 Jy
! Clean residual min=-0.002372 max=0.002633 Jy/beam
! Clean residual mean=0.000003 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.288932 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 88 components and 0.288932 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9447 mas, bmaj=2.152 mas, bpa=8.687 degrees
! Estimated noise=0.425303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000683385 Jy
! Component: 100  -  total flux cleaned = 0.00102838 Jy
! Component: 150  -  total flux cleaned = 0.00127879 Jy
! Component: 200  -  total flux cleaned = 0.00154887 Jy
! Total flux subtracted in 200 components = 0.00154887 Jy
! Clean residual min=-0.002563 max=0.002192 Jy/beam
! Clean residual mean=0.000002 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.290481 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 110 components and 0.290481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058486Jy  sigma=1.337419
! Fit after  self-cal, rms=0.058470Jy  sigma=1.337116
wmodel /scr/pima/bg219e_uvs/J1351+0830_X_map.mod
! Writing 110 model components to file: /scr/pima/bg219e_uvs/J1351+0830_X_map.mod
wobs /scr/pima/bg219e_uvs/J1351+0830_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1351+0830_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J1351+0830_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219e_uvs/J1351+0830_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000425884 Jy
! Component: 100  -  total flux cleaned = -0.000426765 Jy
! Component: 150  -  total flux cleaned = -0.000284121 Jy
! Component: 200  -  total flux cleaned = -0.000283158 Jy
! Component: 250  -  total flux cleaned = -0.000283441 Jy
! Component: 300  -  total flux cleaned = -0.000252444 Jy
! Component: 350  -  total flux cleaned = -0.000221988 Jy
! Component: 400  -  total flux cleaned = -0.000133799 Jy
! Component: 450  -  total flux cleaned = -0.000133853 Jy
! Component: 500  -  total flux cleaned = -5.06214e-05 Jy
! Component: 550  -  total flux cleaned = -0.000132434 Jy
! Component: 600  -  total flux cleaned = -5.26713e-05 Jy
! Component: 650  -  total flux cleaned = -5.23493e-05 Jy
! Component: 700  -  total flux cleaned = 4.96758e-05 Jy
! Component: 750  -  total flux cleaned = 0.000198711 Jy
! Component: 800  -  total flux cleaned = 0.000173686 Jy
! Component: 850  -  total flux cleaned = 0.000220986 Jy
! Component: 900  -  total flux cleaned = 0.000173758 Jy
! Component: 950  -  total flux cleaned = 0.000127968 Jy
! Component: 1000  -  total flux cleaned = 0.00015092 Jy
! Component: 1050  -  total flux cleaned = 0.00019559 Jy
! Component: 1100  -  total flux cleaned = 0.000151161 Jy
! Component: 1150  -  total flux cleaned = 0.00010784 Jy
! Component: 1200  -  total flux cleaned = 8.71489e-05 Jy
! Component: 1250  -  total flux cleaned = 0.0001506 Jy
! Component: 1300  -  total flux cleaned = 4.65202e-05 Jy
! Component: 1350  -  total flux cleaned = 8.76974e-05 Jy
! Component: 1400  -  total flux cleaned = 2.69902e-05 Jy
! Component: 1450  -  total flux cleaned = -1.32581e-05 Jy
! Component: 1500  -  total flux cleaned = -5.27698e-05 Jy
! Component: 1550  -  total flux cleaned = -7.23606e-05 Jy
! Component: 1600  -  total flux cleaned = -0.000110843 Jy
! Component: 1650  -  total flux cleaned = -3.42397e-05 Jy
! Component: 1700  -  total flux cleaned = -0.000109612 Jy
! Component: 1750  -  total flux cleaned = -0.000127701 Jy
! Component: 1800  -  total flux cleaned = -9.07959e-05 Jy
! Component: 1850  -  total flux cleaned = -0.00012746 Jy
! Component: 1900  -  total flux cleaned = -0.000109367 Jy
! Component: 1950  -  total flux cleaned = -0.000145154 Jy
! Component: 2000  -  total flux cleaned = -0.000127439 Jy
! Component: 2050  -  total flux cleaned = -0.000162828 Jy
! Component: 2100  -  total flux cleaned = -0.000214555 Jy
! Component: 2150  -  total flux cleaned = -0.000248694 Jy
! Component: 2200  -  total flux cleaned = -0.000282532 Jy
! Component: 2250  -  total flux cleaned = -0.000232545 Jy
! Component: 2300  -  total flux cleaned = -0.000282345 Jy
! Component: 2350  -  total flux cleaned = -0.000331582 Jy
! Component: 2400  -  total flux cleaned = -0.000266582 Jy
! Component: 2450  -  total flux cleaned = -0.000282616 Jy
! Component: 2500  -  total flux cleaned = -0.000330434 Jy
! Component: 2550  -  total flux cleaned = -0.000267137 Jy
! Component: 2600  -  total flux cleaned = -0.000188895 Jy
! Component: 2650  -  total flux cleaned = -0.000157952 Jy
! Component: 2700  -  total flux cleaned = -0.00012732 Jy
! Component: 2750  -  total flux cleaned = -9.67706e-05 Jy
! Component: 2800  -  total flux cleaned = -8.17658e-05 Jy
! Component: 2850  -  total flux cleaned = -6.65231e-05 Jy
! Component: 2900  -  total flux cleaned = -2.19451e-05 Jy
! Component: 2950  -  total flux cleaned = -2.18458e-05 Jy
! Component: 3000  -  total flux cleaned = -2.18288e-05 Jy
! Component: 3050  -  total flux cleaned = 7.0668e-06 Jy
! Component: 3100  -  total flux cleaned = 2.13028e-05 Jy
! Component: 3150  -  total flux cleaned = -2.16031e-05 Jy
! Component: 3200  -  total flux cleaned = 2.08307e-05 Jy
! Component: 3250  -  total flux cleaned = -7.33966e-06 Jy
! Component: 3300  -  total flux cleaned = 3.46063e-05 Jy
! Component: 3350  -  total flux cleaned = 3.44504e-05 Jy
! Component: 3400  -  total flux cleaned = 2.05197e-05 Jy
! Component: 3450  -  total flux cleaned = -4.78201e-05 Jy
! Component: 3500  -  total flux cleaned = -2.06118e-05 Jy
! Component: 3550  -  total flux cleaned = 6.37334e-06 Jy
! Component: 3600  -  total flux cleaned = -3.38016e-05 Jy
! Component: 3650  -  total flux cleaned = -7.26295e-06 Jy
! Component: 3700  -  total flux cleaned = -6.01533e-05 Jy
! Component: 3750  -  total flux cleaned = -6.01632e-05 Jy
! Component: 3800  -  total flux cleaned = -6.00019e-05 Jy
! Component: 3850  -  total flux cleaned = -7.29506e-05 Jy
! Component: 3900  -  total flux cleaned = -7.2843e-05 Jy
! Component: 3950  -  total flux cleaned = -8.55803e-05 Jy
! Component: 4000  -  total flux cleaned = -9.83849e-05 Jy
! Component: 4050  -  total flux cleaned = -7.30514e-05 Jy
! Total flux subtracted in 4096 components = -8.55726e-05 Jy
! Clean residual min=-0.000685 max=0.000821 Jy/beam
! Clean residual mean=0.000001 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.290395 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 392 components and 0.290395 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1351+0830_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9447 x 2.152 at 8.687 degrees (North through East)
! Clean map  min=-0.0017802  max=0.22473 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1351+0830_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.224726 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000208525 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.278373 0.278373 0.556746 1.11349 2.22699 4.45397 8.90794 17.8159 35.6318 71.2635
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.224 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1077.69 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1351+0830_X_uvs.log closed on Thu Apr  7 09:10:31 2016