! Started logfile: /scr/pima/bg219e_uvs/J1350+2331_X_dfm.log on Thu May 19 18:42:29 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1350+2331_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1350+2331_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.805797 visibilities/baseline/integration-bin.
! Found source: J1350+2331
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1350+2331_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001746Jy  sigma=26.866973
! Fit after  self-cal, rms=0.938929Jy  sigma=25.161608
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7369 mas, bmaj=1.944 mas, bpa=6.218 degrees
! Estimated noise=0.359641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0458537 Jy
! Component: 100  -  total flux cleaned = 0.0582299 Jy
! Total flux subtracted in 100 components = 0.0582299 Jy
! Clean residual min=-0.002988 max=0.005407 Jy/beam
! Clean residual mean=-0.000004 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.0582298 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0582298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058458Jy  sigma=1.475067
! Fit after  self-cal, rms=0.057887Jy  sigma=1.461910
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00634494 Jy
! Component: 100  -  total flux cleaned = 0.00965612 Jy
! Total flux subtracted in 100 components = 0.00965612 Jy
! Clean residual min=-0.002487 max=0.004649 Jy/beam
! Clean residual mean=-0.000002 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.067886 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.067886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057018Jy  sigma=1.436721
! Fit after  self-cal, rms=0.057016Jy  sigma=1.436289
! Inverting map 
! Added new window around map position (-2.4, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396091 Jy
! Component: 100  -  total flux cleaned = 0.00591773 Jy
! Total flux subtracted in 100 components = 0.00591773 Jy
! Clean residual min=-0.002328 max=0.002276 Jy/beam
! Clean residual mean=-0.000001 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.0738037 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.0738037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056715Jy  sigma=1.426737
! Fit after  self-cal, rms=0.056678Jy  sigma=1.426016
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9584 mas, bmaj=2.208 mas, bpa=5.68 degrees
! Estimated noise=0.193219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249833 Jy
! Component: 100  -  total flux cleaned = 0.00396752 Jy
! Component: 150  -  total flux cleaned = 0.00493282 Jy
! Component: 200  -  total flux cleaned = 0.00546297 Jy
! Total flux subtracted in 200 components = 0.00546297 Jy
! Clean residual min=-0.001518 max=0.001456 Jy/beam
! Clean residual mean=0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0792667 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 33 components and 0.0792667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056565Jy  sigma=1.422576
! Fit after  self-cal, rms=0.056553Jy  sigma=1.422200
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9584 x 2.208 at 5.68 degrees (North through East)
! Clean map  min=-0.0015127  max=0.062436 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.03     KP        1.02     
!   LA        1.02     MK        0.97     NL        1.03     OV        0.97     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.08     KP        1.04     
!   LA        0.96     MK        0.97     NL        1.04     OV        1.03     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.08     HN        1.03     KP        1.02     
!   LA        0.95     MK        0.94     NL        1.04     OV        1.07     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.06     KP        0.96     
!   LA        0.98     MK        0.98     NL        1.07     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.98     KP        1.08     
!   LA        0.95     MK        1.00     NL        0.96     OV        1.01     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        0.94     KP        1.04     
!   LA        0.95     MK        1.15     NL        1.03     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        0.87     KP        0.98     
!   LA        1.00     MK        1.01     NL        1.01     OV        1.00     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.95     KP        1.02     
!   LA        1.02     MK        0.95     NL        1.04     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        1.01     
!   LA        0.99     MK        0.89     NL        1.03     OV        0.95     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.94     HN        1.02     KP        0.97     
!   LA        0.91     MK        0.95     NL        1.04     OV        1.04     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.98     KP        1.04     
!   LA        0.98     MK        1.02     NL        1.01     OV        1.04     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        1.01     KP        1.05     
!   LA        0.92     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.056553Jy  sigma=1.422200
! Fit after  self-cal, rms=0.056430Jy  sigma=1.419158
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9575 mas, bmaj=2.21 mas, bpa=5.612 degrees
! Estimated noise=0.193071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000662302 Jy
! Component: 100  -  total flux cleaned = 0.000662961 Jy
! Component: 150  -  total flux cleaned = 0.00066419 Jy
! Component: 200  -  total flux cleaned = 0.000665649 Jy
! Total flux subtracted in 200 components = 0.000665649 Jy
! Clean residual min=-0.001320 max=0.001228 Jy/beam
! Clean residual mean=0.000001 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.0799323 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.0799323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056415Jy  sigma=1.418734
! Fit after  self-cal, rms=0.056430Jy  sigma=1.418544
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056430Jy  sigma=1.418544
! Fit after  self-cal, rms=0.056533Jy  sigma=1.414782
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9563 mas, bmaj=2.212 mas, bpa=5.446 degrees
! Estimated noise=0.193248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000689533 Jy
! Component: 100  -  total flux cleaned = 0.000782279 Jy
! Component: 150  -  total flux cleaned = 0.000782838 Jy
! Component: 200  -  total flux cleaned = 0.000821464 Jy
! Total flux subtracted in 200 components = 0.000821464 Jy
! Clean residual min=-0.001144 max=0.001121 Jy/beam
! Clean residual mean=-0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.0807538 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 0.0807538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056522Jy  sigma=1.414471
! Fit after  self-cal, rms=0.056534Jy  sigma=1.414289
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141314 Jy
! Component: 100  -  total flux cleaned = 0.000141711 Jy
! Component: 150  -  total flux cleaned = 0.000130269 Jy
! Component: 200  -  total flux cleaned = 0.000109825 Jy
! Total flux subtracted in 200 components = 0.000109825 Jy
! Clean residual min=-0.001126 max=0.001107 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0808636 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.0808636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056529Jy  sigma=1.414151
! Fit after  self-cal, rms=0.056528Jy  sigma=1.414130
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056528Jy  sigma=1.414130
! Fit after  self-cal, rms=0.056428Jy  sigma=1.414068
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9532 mas, bmaj=2.21 mas, bpa=5.351 degrees
! Estimated noise=0.19311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000373358 Jy
! Component: 100  -  total flux cleaned = 0.000429527 Jy
! Component: 150  -  total flux cleaned = 0.000469591 Jy
! Component: 200  -  total flux cleaned = 0.000469654 Jy
! Total flux subtracted in 200 components = 0.000469654 Jy
! Clean residual min=-0.001118 max=0.001140 Jy/beam
! Clean residual mean=-0.000001 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0813333 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 60 components and 0.0813333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056424Jy  sigma=1.413937
! Fit after  self-cal, rms=0.056422Jy  sigma=1.413918
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.2, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000582372 Jy
! Component: 100  -  total flux cleaned = 0.000301875 Jy
! Component: 150  -  total flux cleaned = 0.000185987 Jy
! Component: 200  -  total flux cleaned = 0.000173122 Jy
! Total flux subtracted in 200 components = 0.000173122 Jy
! Clean residual min=-0.001122 max=0.001056 Jy/beam
! Clean residual mean=-0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0815064 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 79 components and 0.0815064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056402Jy  sigma=1.413484
! Fit after  self-cal, rms=0.056399Jy  sigma=1.413436
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056399Jy  sigma=1.413436
! Fit after  self-cal, rms=0.056377Jy  sigma=1.413365
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=2.808 mas, bpa=-2.098 degrees
! Estimated noise=0.237872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230686 Jy
! Component: 100  -  total flux cleaned = 0.000230262 Jy
! Component: 150  -  total flux cleaned = 0.000255962 Jy
! Component: 200  -  total flux cleaned = 0.000256279 Jy
! Total flux subtracted in 200 components = 0.000256279 Jy
! Clean residual min=-0.001372 max=0.001093 Jy/beam
! Clean residual mean=-0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0817627 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 88 components and 0.0817627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056371Jy  sigma=1.413237
! Fit after  self-cal, rms=0.056370Jy  sigma=1.413220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.95483e-05 Jy
! Component: 100  -  total flux cleaned = 7.97299e-05 Jy
! Component: 150  -  total flux cleaned = 7.01748e-05 Jy
! Component: 200  -  total flux cleaned = 7.03666e-05 Jy
! Total flux subtracted in 200 components = 7.03666e-05 Jy
! Clean residual min=-0.001379 max=0.001097 Jy/beam
! Clean residual mean=-0.000002 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.081833 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 94 components and 0.081833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056368Jy  sigma=1.413169
! Fit after  self-cal, rms=0.056367Jy  sigma=1.413161
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.95 mas, bmaj=2.209 mas, bpa=5.273 degrees
! Estimated noise=0.193092 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.95 x 2.209 at 5.273 degrees (North through East)
! Clean map  min=-0.0010089  max=0.062312 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7315 mas, bmaj=1.946 mas, bpa=5.714 degrees
! Estimated noise=0.357648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0456862 Jy
! Component: 100  -  total flux cleaned = 0.0591359 Jy
! Component: 150  -  total flux cleaned = 0.0661821 Jy
! Component: 200  -  total flux cleaned = 0.0705606 Jy
! Total flux subtracted in 200 components = 0.0705606 Jy
! Clean residual min=-0.002384 max=0.002431 Jy/beam
! Clean residual mean=-0.000002 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0705606 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0705606 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.95 mas, bmaj=2.209 mas, bpa=5.273 degrees
! Estimated noise=0.193092 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00401112 Jy
! Component: 100  -  total flux cleaned = 0.00652225 Jy
! Component: 150  -  total flux cleaned = 0.00828556 Jy
! Component: 200  -  total flux cleaned = 0.00958742 Jy
! Total flux subtracted in 200 components = 0.00958742 Jy
! Clean residual min=-0.001247 max=0.001170 Jy/beam
! Clean residual mean=-0.000002 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.080148 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 24 components and 0.080148 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=2.808 mas, bpa=-2.098 degrees
! Estimated noise=0.237872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136922 Jy
! Component: 100  -  total flux cleaned = 0.0015934 Jy
! Component: 150  -  total flux cleaned = 0.00154914 Jy
! Component: 200  -  total flux cleaned = 0.00156858 Jy
! Total flux subtracted in 200 components = 0.00156858 Jy
! Clean residual min=-0.001381 max=0.001088 Jy/beam
! Clean residual mean=-0.000002 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0817166 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.64351e-05 Jy
! Component: 100  -  total flux cleaned = 3.06326e-05 Jy
! Component: 150  -  total flux cleaned = 4.30859e-05 Jy
! Component: 200  -  total flux cleaned = 4.29422e-05 Jy
! Total flux subtracted in 200 components = 4.29422e-05 Jy
! Clean residual min=-0.001381 max=0.001066 Jy/beam
! Clean residual mean=-0.000002 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.0817595 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 66 components and 0.0817595 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.95 mas, bmaj=2.209 mas, bpa=5.273 degrees
! Estimated noise=0.193092 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144209 Jy
! Component: 100  -  total flux cleaned = 9.23031e-05 Jy
! Component: 150  -  total flux cleaned = 2.96707e-05 Jy
! Component: 200  -  total flux cleaned = 2.98948e-05 Jy
! Total flux subtracted in 200 components = 2.98948e-05 Jy
! Clean residual min=-0.001081 max=0.001017 Jy/beam
! Clean residual mean=-0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.0817894 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 80 components and 0.0817894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056371Jy  sigma=1.413323
! Fit after  self-cal, rms=0.056369Jy  sigma=1.413262
wmodel /J1350+2331_X_map.mod
! wmodel: Unable to open new model file: /J1350+2331_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1350+2331_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.95 x 2.209 at 5.273 degrees (North through East)
! Clean map  min=-0.0010177  max=0.06222 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1350+2331_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0622195 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000250412 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.2074 1.2074 2.41479 4.82958 9.65916 19.3183 38.6367 77.2733
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.062 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  248.468 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1350+2331_X_dfm.log closed on Thu May 19 18:42:32 2016