! Started logfile: /scr/pima/bg219e_uvs/J1345+0706_X_uvs.log on Thu Apr 7 09:10:13 2016 obs /scr/pima/bg219e_uvs/J1345+0706_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1345+0706_X_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.804728 visibilities/baseline/integration-bin. ! Found source: J1345+0706 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20424 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1345+0706_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.012920Jy sigma=26.223546 ! Fit after self-cal, rms=0.863768Jy sigma=22.440270 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7759 mas, bmaj=1.964 mas, bpa=7.914 degrees ! Estimated noise=0.422989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105881 Jy ! Component: 100 - total flux cleaned = 0.13017 Jy ! Total flux subtracted in 100 components = 0.13017 Jy ! Clean residual min=-0.008065 max=0.011948 Jy/beam ! Clean residual mean=-0.000000 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.13017 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.13017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.071048Jy sigma=1.837538 ! Fit after self-cal, rms=0.070550Jy sigma=1.821923 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9911 mas, bmaj=2.177 mas, bpa=5.461 degrees ! Estimated noise=0.256461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00956341 Jy ! Component: 100 - total flux cleaned = 0.0125231 Jy ! Component: 150 - total flux cleaned = 0.0125303 Jy ! Component: 200 - total flux cleaned = 0.0127286 Jy ! Total flux subtracted in 200 components = 0.0127286 Jy ! Clean residual min=-0.007843 max=0.011585 Jy/beam ! Clean residual mean=-0.000000 rms=0.002762 Jy/beam ! Combined flux in latest and established models = 0.142899 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.142899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069111Jy sigma=1.795757 ! Fit after self-cal, rms=0.069102Jy sigma=1.795269 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9911 x 2.177 at 5.461 degrees (North through East) ! Clean map min=-0.0076418 max=0.13837 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069102Jy sigma=1.795269 ! Fit after self-cal, rms=0.069102Jy sigma=1.795269 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9911 mas, bmaj=2.177 mas, bpa=5.461 degrees ! Estimated noise=0.256461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425735 Jy ! Component: 100 - total flux cleaned = 0.000352721 Jy ! Component: 150 - total flux cleaned = 0.000416361 Jy ! Component: 200 - total flux cleaned = 0.000358849 Jy ! Total flux subtracted in 200 components = 0.000358849 Jy ! Clean residual min=-0.007635 max=0.011300 Jy/beam ! Clean residual mean=0.000000 rms=0.002749 Jy/beam ! Combined flux in latest and established models = 0.143258 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.143258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.068975Jy sigma=1.792434 ! Fit after self-cal, rms=0.068974Jy sigma=1.792375 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.068974Jy sigma=1.792375 ! Fit after self-cal, rms=0.065615Jy sigma=1.764475 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=2.2 mas, bpa=5.698 degrees ! Estimated noise=0.243678 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00548903 Jy ! Component: 100 - total flux cleaned = -0.0078264 Jy ! Component: 150 - total flux cleaned = -0.0092247 Jy ! Component: 200 - total flux cleaned = -0.0101266 Jy ! Total flux subtracted in 200 components = -0.0101266 Jy ! Clean residual min=-0.005770 max=0.011301 Jy/beam ! Clean residual mean=0.000001 rms=0.002364 Jy/beam ! Combined flux in latest and established models = 0.133131 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.133131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.065266Jy sigma=1.750481 ! Fit after self-cal, rms=0.065259Jy sigma=1.750352 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.2, 32.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103526 Jy ! Component: 100 - total flux cleaned = 0.015227 Jy ! Component: 150 - total flux cleaned = 0.0169382 Jy ! Component: 200 - total flux cleaned = 0.0184414 Jy ! Total flux subtracted in 200 components = 0.0184414 Jy ! Clean residual min=-0.008650 max=0.009542 Jy/beam ! Clean residual mean=0.000004 rms=0.002057 Jy/beam ! Combined flux in latest and established models = 0.151573 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 71 components and 0.151573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063784Jy sigma=1.701004 ! Fit after self-cal, rms=0.063572Jy sigma=1.694124 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063572Jy sigma=1.694124 ! Fit after self-cal, rms=0.062651Jy sigma=1.688119 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=2.211 mas, bpa=5.614 degrees ! Estimated noise=0.23874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.00287e-05 Jy ! Component: 100 - total flux cleaned = 0.000436093 Jy ! Component: 150 - total flux cleaned = 0.00102171 Jy ! Component: 200 - total flux cleaned = 0.0015806 Jy ! Total flux subtracted in 200 components = 0.0015806 Jy ! Clean residual min=-0.008423 max=0.008005 Jy/beam ! Clean residual mean=0.000003 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 0.153153 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.153153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062269Jy sigma=1.675067 ! Fit after self-cal, rms=0.062239Jy sigma=1.673680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136952 Jy ! Component: 100 - total flux cleaned = 0.00169299 Jy ! Component: 150 - total flux cleaned = 0.0020264 Jy ! Component: 200 - total flux cleaned = 0.00231817 Jy ! Total flux subtracted in 200 components = 0.00231817 Jy ! Clean residual min=-0.008353 max=0.007554 Jy/beam ! Clean residual mean=0.000003 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.155472 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.155472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062126Jy sigma=1.670040 ! Fit after self-cal, rms=0.062121Jy sigma=1.669611 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062121Jy sigma=1.669611 ! Fit after self-cal, rms=0.061621Jy sigma=1.668185 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.173 mas, bmaj=3.17 mas, bpa=-1.486 degrees ! Estimated noise=0.278142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133681 Jy ! Component: 100 - total flux cleaned = -0.00106426 Jy ! Component: 150 - total flux cleaned = -0.00088347 Jy ! Component: 200 - total flux cleaned = -0.000888467 Jy ! Total flux subtracted in 200 components = -0.000888467 Jy ! Clean residual min=-0.011326 max=0.010731 Jy/beam ! Clean residual mean=0.000006 rms=0.002644 Jy/beam ! Combined flux in latest and established models = 0.154583 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.154583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061574Jy sigma=1.666110 ! Fit after self-cal, rms=0.061556Jy sigma=1.665637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566267 Jy ! Component: 100 - total flux cleaned = 0.000795289 Jy ! Component: 150 - total flux cleaned = 0.000833948 Jy ! Component: 200 - total flux cleaned = 0.000870499 Jy ! Total flux subtracted in 200 components = 0.000870499 Jy ! Clean residual min=-0.011275 max=0.010345 Jy/beam ! Clean residual mean=0.000006 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 0.155454 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.155454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061555Jy sigma=1.665277 ! Fit after self-cal, rms=0.061551Jy sigma=1.665125 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.215 mas, bpa=5.689 degrees ! Estimated noise=0.236099 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.016 x 2.215 at 5.689 degrees (North through East) ! Clean map min=-0.0075786 max=0.12668 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7903 mas, bmaj=1.993 mas, bpa=8.156 degrees ! Estimated noise=0.396822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0992048 Jy ! Component: 100 - total flux cleaned = 0.123539 Jy ! Component: 150 - total flux cleaned = 0.135312 Jy ! Component: 200 - total flux cleaned = 0.14261 Jy ! Total flux subtracted in 200 components = 0.14261 Jy ! Clean residual min=-0.006507 max=0.008873 Jy/beam ! Clean residual mean=-0.000003 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 0.14261 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.14261 Jy ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.215 mas, bpa=5.689 degrees ! Estimated noise=0.236099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 29.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860325 Jy ! Component: 100 - total flux cleaned = 0.0126488 Jy ! Component: 150 - total flux cleaned = 0.0131778 Jy ! Component: 200 - total flux cleaned = 0.0131831 Jy ! Total flux subtracted in 200 components = 0.0131831 Jy ! Clean residual min=-0.006812 max=0.007855 Jy/beam ! Clean residual mean=-0.000001 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.155793 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.155793 Jy ! Inverting map ! Added new window around map position (-3.4, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00680582 Jy ! Component: 100 - total flux cleaned = 0.00817503 Jy ! Component: 150 - total flux cleaned = 0.00842629 Jy ! Component: 200 - total flux cleaned = 0.00878307 Jy ! Total flux subtracted in 200 components = 0.00878307 Jy ! Clean residual min=-0.006744 max=0.006617 Jy/beam ! Clean residual mean=-0.000003 rms=0.001549 Jy/beam ! Combined flux in latest and established models = 0.164576 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 68 components and 0.164576 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.173 mas, bmaj=3.17 mas, bpa=-1.486 degrees ! Estimated noise=0.278142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271282 Jy ! Component: 100 - total flux cleaned = 9.75355e-05 Jy ! Component: 150 - total flux cleaned = 0.000214245 Jy ! Component: 200 - total flux cleaned = 0.000320228 Jy ! Total flux subtracted in 200 components = 0.000320228 Jy ! Clean residual min=-0.008704 max=0.008436 Jy/beam ! Clean residual mean=-0.000003 rms=0.002313 Jy/beam ! Combined flux in latest and established models = 0.164896 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.46212e-05 Jy ! Component: 100 - total flux cleaned = 0.000258967 Jy ! Component: 150 - total flux cleaned = 0.000256471 Jy ! Component: 200 - total flux cleaned = 0.0002576 Jy ! Total flux subtracted in 200 components = 0.0002576 Jy ! Clean residual min=-0.008568 max=0.008271 Jy/beam ! Clean residual mean=-0.000003 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.165154 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 92 components and 0.165154 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.215 mas, bpa=5.689 degrees ! Estimated noise=0.236099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744912 Jy ! Component: 100 - total flux cleaned = 0.000932198 Jy ! Component: 150 - total flux cleaned = 0.000698465 Jy ! Component: 200 - total flux cleaned = 0.000770705 Jy ! Total flux subtracted in 200 components = 0.000770705 Jy ! Clean residual min=-0.006712 max=0.005644 Jy/beam ! Clean residual mean=-0.000002 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.165925 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.165925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059771Jy sigma=1.607751 ! Fit after self-cal, rms=0.059657Jy sigma=1.603336 wmodel /scr/pima/bg219e_uvs/J1345+0706_X_map.mod ! Writing 112 model components to file: /scr/pima/bg219e_uvs/J1345+0706_X_map.mod wobs /scr/pima/bg219e_uvs/J1345+0706_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1345+0706_X_uvs.fits wwins /scr/pima/bg219e_uvs/J1345+0706_X_map.win ! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J1345+0706_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00242019 Jy ! Component: 100 - total flux cleaned = -0.00232761 Jy ! Component: 150 - total flux cleaned = -0.00162033 Jy ! Component: 200 - total flux cleaned = -0.000864186 Jy ! Component: 250 - total flux cleaned = -6.11785e-05 Jy ! Component: 300 - total flux cleaned = 0.00047696 Jy ! Component: 350 - total flux cleaned = 0.000994154 Jy ! Component: 400 - total flux cleaned = 0.00156322 Jy ! Component: 450 - total flux cleaned = 0.00204288 Jy ! Component: 500 - total flux cleaned = 0.0023095 Jy ! Component: 550 - total flux cleaned = 0.00263195 Jy ! Component: 600 - total flux cleaned = 0.00300536 Jy ! Component: 650 - total flux cleaned = 0.00336835 Jy ! Component: 700 - total flux cleaned = 0.00366252 Jy ! Component: 750 - total flux cleaned = 0.00394811 Jy ! Component: 800 - total flux cleaned = 0.00428194 Jy ! Component: 850 - total flux cleaned = 0.00449886 Jy ! Component: 900 - total flux cleaned = 0.0048163 Jy ! Component: 950 - total flux cleaned = 0.00507503 Jy ! Component: 1000 - total flux cleaned = 0.00537698 Jy ! Component: 1050 - total flux cleaned = 0.00567208 Jy ! Component: 1100 - total flux cleaned = 0.00596005 Jy ! Component: 1150 - total flux cleaned = 0.00628745 Jy ! Component: 1200 - total flux cleaned = 0.00655984 Jy ! Component: 1250 - total flux cleaned = 0.00682613 Jy ! Component: 1300 - total flux cleaned = 0.00699876 Jy ! Component: 1350 - total flux cleaned = 0.00716787 Jy ! Component: 1400 - total flux cleaned = 0.00737589 Jy ! Component: 1450 - total flux cleaned = 0.00766048 Jy ! Component: 1500 - total flux cleaned = 0.00766083 Jy ! Component: 1550 - total flux cleaned = 0.00785611 Jy ! Component: 1600 - total flux cleaned = 0.0080857 Jy ! Component: 1650 - total flux cleaned = 0.0081969 Jy ! Component: 1700 - total flux cleaned = 0.00830674 Jy ! Component: 1750 - total flux cleaned = 0.0084144 Jy ! Component: 1800 - total flux cleaned = 0.0084495 Jy ! Component: 1850 - total flux cleaned = 0.00858756 Jy ! Component: 1900 - total flux cleaned = 0.00865454 Jy ! Component: 1950 - total flux cleaned = 0.00868827 Jy ! Component: 2000 - total flux cleaned = 0.00878583 Jy ! Component: 2050 - total flux cleaned = 0.00878528 Jy ! Component: 2100 - total flux cleaned = 0.00888022 Jy ! Component: 2150 - total flux cleaned = 0.00884968 Jy ! Component: 2200 - total flux cleaned = 0.00891145 Jy ! Component: 2250 - total flux cleaned = 0.00903196 Jy ! Component: 2300 - total flux cleaned = 0.00903215 Jy ! Component: 2350 - total flux cleaned = 0.00914786 Jy ! Component: 2400 - total flux cleaned = 0.00917643 Jy ! Component: 2450 - total flux cleaned = 0.00926063 Jy ! Component: 2500 - total flux cleaned = 0.00923297 Jy ! Component: 2550 - total flux cleaned = 0.00925984 Jy ! Component: 2600 - total flux cleaned = 0.00928632 Jy ! Component: 2650 - total flux cleaned = 0.00933904 Jy ! Component: 2700 - total flux cleaned = 0.00936502 Jy ! Component: 2750 - total flux cleaned = 0.00936524 Jy ! Component: 2800 - total flux cleaned = 0.00941542 Jy ! Component: 2850 - total flux cleaned = 0.00939032 Jy ! Component: 2900 - total flux cleaned = 0.00936665 Jy ! Component: 2950 - total flux cleaned = 0.00941475 Jy ! Component: 3000 - total flux cleaned = 0.00939118 Jy ! Component: 3050 - total flux cleaned = 0.00943783 Jy ! Component: 3100 - total flux cleaned = 0.00932319 Jy ! Component: 3150 - total flux cleaned = 0.00941386 Jy ! Component: 3200 - total flux cleaned = 0.00943651 Jy ! Component: 3250 - total flux cleaned = 0.00945891 Jy ! Component: 3300 - total flux cleaned = 0.00952431 Jy ! Component: 3350 - total flux cleaned = 0.0095458 Jy ! Component: 3400 - total flux cleaned = 0.0095879 Jy ! Component: 3450 - total flux cleaned = 0.00956671 Jy ! Component: 3500 - total flux cleaned = 0.00960793 Jy ! Component: 3550 - total flux cleaned = 0.00964866 Jy ! Component: 3600 - total flux cleaned = 0.00966892 Jy ! Component: 3650 - total flux cleaned = 0.00962929 Jy ! Component: 3700 - total flux cleaned = 0.00970803 Jy ! Component: 3750 - total flux cleaned = 0.00974686 Jy ! Component: 3800 - total flux cleaned = 0.00966969 Jy ! Component: 3850 - total flux cleaned = 0.00968885 Jy ! Component: 3900 - total flux cleaned = 0.00968896 Jy ! Component: 3950 - total flux cleaned = 0.00972621 Jy ! Component: 4000 - total flux cleaned = 0.00976314 Jy ! Component: 4050 - total flux cleaned = 0.00976321 Jy ! Total flux subtracted in 4096 components = 0.00979922 Jy ! Clean residual min=-0.000971 max=0.001053 Jy/beam ! Clean residual mean=0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.175724 Jy keep ! Adding 374 model components to the UV plane model. ! The established model now contains 486 components and 0.175724 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1345+0706_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.016 x 2.215 at 5.689 degrees (North through East) ! Clean map min=-0.0056954 max=0.12144 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1345+0706_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000332617 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.821709 0.821709 1.64342 3.28684 6.57367 13.1473 26.2947 52.5894 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.121 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 365.092 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1345+0706_X_uvs.log closed on Thu Apr 7 09:10:17 2016