! Started logfile: /scr/pima/bg219e_uvs/J1341+2816_X_dfm.log on Thu May 19 18:41:55 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1341+2816_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1341+2816_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.824537 visibilities/baseline/integration-bin.
! Found source: J1341+2816
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21372 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1341+2816_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009746Jy  sigma=24.039198
! Fit after  self-cal, rms=0.816904Jy  sigma=19.447958
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7402 mas, bmaj=1.933 mas, bpa=7.043 degrees
! Estimated noise=0.414156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140212 Jy
! Component: 100  -  total flux cleaned = 0.173937 Jy
! Total flux subtracted in 100 components = 0.173937 Jy
! Clean residual min=-0.005064 max=0.013172 Jy/beam
! Clean residual mean=-0.000006 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.173937 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.173937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062983Jy  sigma=1.433776
! Fit after  self-cal, rms=0.062953Jy  sigma=1.433070
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132888 Jy
! Component: 100  -  total flux cleaned = 0.0194341 Jy
! Total flux subtracted in 100 components = 0.0194341 Jy
! Clean residual min=-0.003280 max=0.003481 Jy/beam
! Clean residual mean=-0.000003 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.193371 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.193371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059885Jy  sigma=1.354666
! Fit after  self-cal, rms=0.059883Jy  sigma=1.354504
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9387 mas, bmaj=2.161 mas, bpa=4.89 degrees
! Estimated noise=0.207637 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00462008 Jy
! Component: 100  -  total flux cleaned = 0.00706013 Jy
! Component: 150  -  total flux cleaned = 0.00844865 Jy
! Component: 200  -  total flux cleaned = 0.00878175 Jy
! Total flux subtracted in 200 components = 0.00878175 Jy
! Clean residual min=-0.001824 max=0.002547 Jy/beam
! Clean residual mean=-0.000002 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.202152 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.202152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059538Jy  sigma=1.345956
! Fit after  self-cal, rms=0.059535Jy  sigma=1.345832
! Inverting map 
! Added new window around map position (0.2, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209523 Jy
! Component: 100  -  total flux cleaned = 0.00287597 Jy
! Component: 150  -  total flux cleaned = 0.00302874 Jy
! Component: 200  -  total flux cleaned = 0.00307786 Jy
! Total flux subtracted in 200 components = 0.00307786 Jy
! Clean residual min=-0.001648 max=0.001570 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.20523 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.20523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059458Jy  sigma=1.343948
! Fit after  self-cal, rms=0.059451Jy  sigma=1.343776
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9387 x 2.161 at 4.89 degrees (North through East)
! Clean map  min=-0.0014793  max=0.18421 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.99     MK        0.97     NL        0.98     OV        0.99     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        1.02     
!   LA        0.99     MK        0.96     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.02     NL        0.99     OV        1.01     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.03     KP        1.02     
!   LA        0.98     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.99     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        1.04     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.97     KP        0.98     
!   LA        0.98     MK        1.05     NL        1.02     OV        1.00     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        1.01     
!   LA        1.00     MK        1.02     NL        1.01     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.00     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        1.03     
!   LA        0.97     MK        1.06     NL        1.03     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.04     OV        1.02     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.059451Jy  sigma=1.343776
! Fit after  self-cal, rms=0.059457Jy  sigma=1.339553
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9423 mas, bmaj=2.165 mas, bpa=4.834 degrees
! Estimated noise=0.20816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000867044 Jy
! Component: 100  -  total flux cleaned = -0.00121182 Jy
! Component: 150  -  total flux cleaned = -0.00138548 Jy
! Component: 200  -  total flux cleaned = -0.00140551 Jy
! Total flux subtracted in 200 components = -0.00140551 Jy
! Clean residual min=-0.001444 max=0.001415 Jy/beam
! Clean residual mean=-0.000001 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.203825 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 48 components and 0.203825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059435Jy  sigma=1.339056
! Fit after  self-cal, rms=0.059438Jy  sigma=1.339028
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059438Jy  sigma=1.339028
! Fit after  self-cal, rms=0.059372Jy  sigma=1.336182
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9448 mas, bmaj=2.17 mas, bpa=4.717 degrees
! Estimated noise=0.208141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000118582 Jy
! Component: 100  -  total flux cleaned = -0.000183817 Jy
! Component: 150  -  total flux cleaned = -0.00018473 Jy
! Component: 200  -  total flux cleaned = -0.000221034 Jy
! Total flux subtracted in 200 components = -0.000221034 Jy
! Clean residual min=-0.001212 max=0.001346 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.203604 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 65 components and 0.203604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059364Jy  sigma=1.335965
! Fit after  self-cal, rms=0.059364Jy  sigma=1.335934
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12, -31.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112584 Jy
! Component: 100  -  total flux cleaned = 0.00139471 Jy
! Component: 150  -  total flux cleaned = 0.0013272 Jy
! Component: 200  -  total flux cleaned = 0.0012984 Jy
! Total flux subtracted in 200 components = 0.0012984 Jy
! Clean residual min=-0.001221 max=0.001346 Jy/beam
! Clean residual mean=-0.000001 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.204902 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 0.204902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059340Jy  sigma=1.335396
! Fit after  self-cal, rms=0.059338Jy  sigma=1.335365
! Inverting map 
! Added new window around map position (-8.4, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000820643 Jy
! Component: 100  -  total flux cleaned = 0.000795955 Jy
! Component: 150  -  total flux cleaned = 0.000796131 Jy
! Component: 200  -  total flux cleaned = 0.000815427 Jy
! Total flux subtracted in 200 components = 0.000815427 Jy
! Clean residual min=-0.001189 max=0.001070 Jy/beam
! Clean residual mean=-0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.205718 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 103 components and 0.205718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059313Jy  sigma=1.334824
! Fit after  self-cal, rms=0.059312Jy  sigma=1.334808
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059312Jy  sigma=1.334808
! Fit after  self-cal, rms=0.059259Jy  sigma=1.334737
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9458 mas, bmaj=2.171 mas, bpa=4.696 degrees
! Estimated noise=0.207891 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217021 Jy
! Component: 100  -  total flux cleaned = 0.00025259 Jy
! Component: 150  -  total flux cleaned = 0.000252601 Jy
! Component: 200  -  total flux cleaned = 0.000252086 Jy
! Total flux subtracted in 200 components = 0.000252086 Jy
! Clean residual min=-0.001156 max=0.001025 Jy/beam
! Clean residual mean=-0.000000 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.20597 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 112 components and 0.20597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059250Jy  sigma=1.334529
! Fit after  self-cal, rms=0.059250Jy  sigma=1.334522
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.95054e-05 Jy
! Component: 100  -  total flux cleaned = -4.97662e-05 Jy
! Component: 150  -  total flux cleaned = -7.73443e-05 Jy
! Component: 200  -  total flux cleaned = -9.02624e-05 Jy
! Total flux subtracted in 200 components = -9.02624e-05 Jy
! Clean residual min=-0.001148 max=0.001030 Jy/beam
! Clean residual mean=-0.000000 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.205879 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 122 components and 0.205879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059244Jy  sigma=1.334384
! Fit after  self-cal, rms=0.059244Jy  sigma=1.334384
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059244Jy  sigma=1.334384
! Fit after  self-cal, rms=0.059253Jy  sigma=1.334371
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.095 mas, bmaj=2.716 mas, bpa=-3.845 degrees
! Estimated noise=0.254928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000414966 Jy
! Component: 100  -  total flux cleaned = -0.000532159 Jy
! Component: 150  -  total flux cleaned = -0.000620282 Jy
! Component: 200  -  total flux cleaned = -0.000660214 Jy
! Total flux subtracted in 200 components = -0.000660214 Jy
! Clean residual min=-0.001092 max=0.001184 Jy/beam
! Clean residual mean=-0.000001 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.205219 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 132 components and 0.205219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059250Jy  sigma=1.334303
! Fit after  self-cal, rms=0.059249Jy  sigma=1.334298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.57921e-05 Jy
! Component: 100  -  total flux cleaned = -9.26727e-05 Jy
! Component: 150  -  total flux cleaned = -0.000127557 Jy
! Component: 200  -  total flux cleaned = -0.000160601 Jy
! Total flux subtracted in 200 components = -0.000160601 Jy
! Clean residual min=-0.001080 max=0.001183 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.205059 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 137 components and 0.205059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059248Jy  sigma=1.334275
! Fit after  self-cal, rms=0.059248Jy  sigma=1.334273
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9462 mas, bmaj=2.171 mas, bpa=4.691 degrees
! Estimated noise=0.207906 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9462 x 2.171 at 4.691 degrees (North through East)
! Clean map  min=-0.0010896  max=0.18459 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7463 mas, bmaj=1.939 mas, bpa=6.818 degrees
! Estimated noise=0.41721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141216 Jy
! Component: 100  -  total flux cleaned = 0.174385 Jy
! Component: 150  -  total flux cleaned = 0.187039 Jy
! Component: 200  -  total flux cleaned = 0.192918 Jy
! Total flux subtracted in 200 components = 0.192918 Jy
! Clean residual min=-0.002763 max=0.003159 Jy/beam
! Clean residual mean=-0.000002 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.192918 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.192918 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9462 mas, bmaj=2.171 mas, bpa=4.691 degrees
! Estimated noise=0.207906 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00417806 Jy
! Component: 100  -  total flux cleaned = 0.00664852 Jy
! Component: 150  -  total flux cleaned = 0.0084541 Jy
! Component: 200  -  total flux cleaned = 0.00966459 Jy
! Total flux subtracted in 200 components = 0.00966459 Jy
! Clean residual min=-0.001447 max=0.001429 Jy/beam
! Clean residual mean=-0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.202583 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 34 components and 0.202583 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.095 mas, bmaj=2.716 mas, bpa=-3.845 degrees
! Estimated noise=0.254928 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126356 Jy
! Component: 100  -  total flux cleaned = 0.00185872 Jy
! Component: 150  -  total flux cleaned = 0.00213105 Jy
! Component: 200  -  total flux cleaned = 0.0022947 Jy
! Total flux subtracted in 200 components = 0.0022947 Jy
! Clean residual min=-0.001251 max=0.001204 Jy/beam
! Clean residual mean=-0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.204878 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102623 Jy
! Component: 100  -  total flux cleaned = 0.000194477 Jy
! Component: 150  -  total flux cleaned = 0.00021203 Jy
! Component: 200  -  total flux cleaned = 0.000227301 Jy
! Total flux subtracted in 200 components = 0.000227301 Jy
! Clean residual min=-0.001206 max=0.001184 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.205105 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 74 components and 0.205105 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9462 mas, bmaj=2.171 mas, bpa=4.691 degrees
! Estimated noise=0.207906 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141283 Jy
! Component: 100  -  total flux cleaned = 0.000306153 Jy
! Component: 150  -  total flux cleaned = 0.000334639 Jy
! Component: 200  -  total flux cleaned = 0.000360809 Jy
! Total flux subtracted in 200 components = 0.000360809 Jy
! Clean residual min=-0.001279 max=0.001234 Jy/beam
! Clean residual mean=-0.000000 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.205466 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.205466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059302Jy  sigma=1.335398
! Fit after  self-cal, rms=0.059296Jy  sigma=1.335329
wmodel /J1341+2816_X_map.mod
! wmodel: Unable to open new model file: /J1341+2816_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1341+2816_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9462 x 2.171 at 4.691 degrees (North through East)
! Clean map  min=-0.001156  max=0.18495 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1341+2816_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.18495 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000277108 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.449487 0.449487 0.898974 1.79795 3.5959 7.19179 14.3836 28.7672 57.5343
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.184 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  667.427 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1341+2816_X_dfm.log closed on Thu May 19 18:41:59 2016