! Started logfile: /scr/pima/bg219e_uvs/J1336+0314_S_dfm.log on Thu May 19 18:41:35 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219e_uvs/J1336+0314_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1336+0314_S_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.773118 visibilities/baseline/integration-bin. ! Found source: J1336+0314 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 8628 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1336+0314_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006895Jy sigma=21.120871 ! Fit after self-cal, rms=0.887284Jy sigma=18.611215 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.451 mas, bpa=2.471 degrees ! Estimated noise=0.530916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0890509 Jy ! Component: 100 - total flux cleaned = 0.108537 Jy ! Total flux subtracted in 100 components = 0.108537 Jy ! Clean residual min=-0.004160 max=0.005897 Jy/beam ! Clean residual mean=0.000001 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.108537 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.108537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066412Jy sigma=1.310243 ! Fit after self-cal, rms=0.066284Jy sigma=1.308694 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589382 Jy ! Component: 100 - total flux cleaned = 0.00890742 Jy ! Total flux subtracted in 100 components = 0.00890742 Jy ! Clean residual min=-0.003842 max=0.003432 Jy/beam ! Clean residual mean=0.000001 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.117445 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.117445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065748Jy sigma=1.296814 ! Fit after self-cal, rms=0.065754Jy sigma=1.296697 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=8.58 mas, bpa=0.6878 degrees ! Estimated noise=0.401768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174176 Jy ! Component: 100 - total flux cleaned = 0.00204118 Jy ! Component: 150 - total flux cleaned = 0.00207542 Jy ! Component: 200 - total flux cleaned = 0.00207499 Jy ! Total flux subtracted in 200 components = 0.00207499 Jy ! Clean residual min=-0.002362 max=0.002730 Jy/beam ! Clean residual mean=0.000002 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.11952 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.11952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065688Jy sigma=1.295669 ! Fit after self-cal, rms=0.065692Jy sigma=1.295651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.871 x 8.58 at 0.6878 degrees (North through East) ! Clean map min=-0.0022731 max=0.11524 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.97 KP 1.04 ! LA 1.00 MK 1.11 NL 0.97 OV 1.03 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.98 KP 1.01 ! LA 1.00 MK 1.09 NL 1.00 OV 0.99 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.99 KP 0.99 ! LA 1.01 MK 1.03 NL 1.01 OV 0.99 ! PT 1.05 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 0.96 KP 0.96 ! LA 0.97 MK 1.02 NL 0.96 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Fit before self-cal, rms=0.065692Jy sigma=1.295651 ! Fit after self-cal, rms=0.065536Jy sigma=1.291359 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=8.612 mas, bpa=1.005 degrees ! Estimated noise=0.401675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237295 Jy ! Component: 100 - total flux cleaned = -0.000331034 Jy ! Component: 150 - total flux cleaned = -0.000417568 Jy ! Component: 200 - total flux cleaned = -0.000478652 Jy ! Total flux subtracted in 200 components = -0.000478652 Jy ! Clean residual min=-0.002418 max=0.002698 Jy/beam ! Clean residual mean=0.000000 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.119041 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.119041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065518Jy sigma=1.291107 ! Fit after self-cal, rms=0.065527Jy sigma=1.291034 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065527Jy sigma=1.291034 ! Fit after self-cal, rms=0.065349Jy sigma=1.285902 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=8.626 mas, bpa=0.9117 degrees ! Estimated noise=0.401867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215525 Jy ! Component: 100 - total flux cleaned = -0.000229541 Jy ! Component: 150 - total flux cleaned = -0.000243018 Jy ! Component: 200 - total flux cleaned = -0.00025497 Jy ! Total flux subtracted in 200 components = -0.00025497 Jy ! Clean residual min=-0.002245 max=0.002617 Jy/beam ! Clean residual mean=0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.118786 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.118786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065342Jy sigma=1.285808 ! Fit after self-cal, rms=0.065349Jy sigma=1.285724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (126.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021301 Jy ! Component: 100 - total flux cleaned = 0.00245947 Jy ! Component: 150 - total flux cleaned = 0.00263767 Jy ! Component: 200 - total flux cleaned = 0.0026833 Jy ! Total flux subtracted in 200 components = 0.0026833 Jy ! Clean residual min=-0.002164 max=0.001956 Jy/beam ! Clean residual mean=0.000003 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.121469 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.121469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065271Jy sigma=1.284255 ! Fit after self-cal, rms=0.065264Jy sigma=1.284126 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065264Jy sigma=1.284126 ! Fit after self-cal, rms=0.065242Jy sigma=1.283995 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.925 mas, bmaj=8.636 mas, bpa=0.9218 degrees ! Estimated noise=0.401461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432864 Jy ! Component: 100 - total flux cleaned = 0.000410494 Jy ! Component: 150 - total flux cleaned = 0.000353916 Jy ! Component: 200 - total flux cleaned = 0.000320892 Jy ! Total flux subtracted in 200 components = 0.000320892 Jy ! Clean residual min=-0.002171 max=0.001802 Jy/beam ! Clean residual mean=0.000003 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.12179 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 81 components and 0.12179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065227Jy sigma=1.283731 ! Fit after self-cal, rms=0.065229Jy sigma=1.283716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.59502e-05 Jy ! Component: 100 - total flux cleaned = 6.72524e-05 Jy ! Component: 150 - total flux cleaned = 9.56208e-05 Jy ! Component: 200 - total flux cleaned = 0.000122478 Jy ! Total flux subtracted in 200 components = 0.000122478 Jy ! Clean residual min=-0.002170 max=0.001778 Jy/beam ! Clean residual mean=0.000003 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.121913 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.121913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065222Jy sigma=1.283607 ! Fit after self-cal, rms=0.065222Jy sigma=1.283604 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065222Jy sigma=1.283604 ! Fit after self-cal, rms=0.065212Jy sigma=1.283573 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=11.79 mas, bpa=0.5648 degrees ! Estimated noise=0.456967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.34561e-05 Jy ! Component: 100 - total flux cleaned = 5.72196e-05 Jy ! Component: 150 - total flux cleaned = 4.61653e-05 Jy ! Component: 200 - total flux cleaned = 3.71684e-05 Jy ! Total flux subtracted in 200 components = 3.71684e-05 Jy ! Clean residual min=-0.001883 max=0.001833 Jy/beam ! Clean residual mean=0.000004 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.12195 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.12195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065211Jy sigma=1.283511 ! Fit after self-cal, rms=0.065212Jy sigma=1.283506 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.75587e-06 Jy ! Component: 100 - total flux cleaned = 5.10328e-06 Jy ! Component: 150 - total flux cleaned = 5.27038e-06 Jy ! Component: 200 - total flux cleaned = 1.1547e-05 Jy ! Total flux subtracted in 200 components = 1.1547e-05 Jy ! Clean residual min=-0.001865 max=0.001822 Jy/beam ! Clean residual mean=0.000003 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.121961 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 110 components and 0.121961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065212Jy sigma=1.283484 ! Fit after self-cal, rms=0.065211Jy sigma=1.283484 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=8.643 mas, bpa=0.9016 degrees ! Estimated noise=0.401156 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.928 x 8.643 at 0.9016 degrees (North through East) ! Clean map min=-0.0021121 max=0.11523 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=7.498 mas, bpa=2.671 degrees ! Estimated noise=0.531647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0891817 Jy ! Component: 100 - total flux cleaned = 0.108674 Jy ! Component: 150 - total flux cleaned = 0.113714 Jy ! Component: 200 - total flux cleaned = 0.116685 Jy ! Total flux subtracted in 200 components = 0.116685 Jy ! Clean residual min=-0.003064 max=0.002653 Jy/beam ! Clean residual mean=0.000001 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.116685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.116685 Jy ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=8.643 mas, bpa=0.9016 degrees ! Estimated noise=0.401156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002281 Jy ! Component: 100 - total flux cleaned = 0.00313149 Jy ! Component: 150 - total flux cleaned = 0.00379035 Jy ! Component: 200 - total flux cleaned = 0.00413179 Jy ! Total flux subtracted in 200 components = 0.00413179 Jy ! Clean residual min=-0.002303 max=0.001731 Jy/beam ! Clean residual mean=0.000002 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.120817 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 0.120817 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=11.79 mas, bpa=0.5648 degrees ! Estimated noise=0.456967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558409 Jy ! Component: 100 - total flux cleaned = 0.000830785 Jy ! Component: 150 - total flux cleaned = 0.000957791 Jy ! Component: 200 - total flux cleaned = 0.00103357 Jy ! Total flux subtracted in 200 components = 0.00103357 Jy ! Clean residual min=-0.001910 max=0.001813 Jy/beam ! Clean residual mean=0.000003 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.12185 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.89412e-05 Jy ! Component: 100 - total flux cleaned = 0.000102361 Jy ! Component: 150 - total flux cleaned = 0.000124392 Jy ! Component: 200 - total flux cleaned = 0.00015444 Jy ! Total flux subtracted in 200 components = 0.00015444 Jy ! Clean residual min=-0.001905 max=0.001825 Jy/beam ! Clean residual mean=0.000004 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.122005 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 86 components and 0.122005 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=8.643 mas, bpa=0.9016 degrees ! Estimated noise=0.401156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151018 Jy ! Component: 100 - total flux cleaned = -0.000190144 Jy ! Component: 150 - total flux cleaned = -0.00017253 Jy ! Component: 200 - total flux cleaned = -0.000140716 Jy ! Total flux subtracted in 200 components = -0.000140716 Jy ! Clean residual min=-0.002205 max=0.001684 Jy/beam ! Clean residual mean=0.000003 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.121864 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.121864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065244Jy sigma=1.283734 ! Fit after self-cal, rms=0.065237Jy sigma=1.283713 wmodel /J1336+0314_S_map.mod ! wmodel: Unable to open new model file: /J1336+0314_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219e_uvs/J1336+0314_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.928 x 8.643 at 0.9016 degrees (North through East) ! Clean map min=-0.0021106 max=0.11543 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1336+0314_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.11543 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000452033 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17482 1.17482 2.34964 4.69929 9.39857 18.7971 37.5943 75.1886 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.115 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 255.358 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1336+0314_S_dfm.log closed on Thu May 19 18:41:37 2016