! Started logfile: /scr/pima/bg219e_uvs/J1335-0511_X_uvs.log on Thu Apr 7 09:09:49 2016 obs /scr/pima/bg219e_uvs/J1335-0511_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1335-0511_X_uva.fits ! AN table 1: 21 integrations on 36 of 36 possible baselines. ! AN table 2: 21 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.900132 visibilities/baseline/integration-bin. ! Found source: J1335-0511 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 16332 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1335-0511_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.003715Jy sigma=24.283707 ! Fit after self-cal, rms=0.884281Jy sigma=21.309194 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9054 mas, bmaj=1.947 mas, bpa=-1.66 degrees ! Estimated noise=0.48308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0899409 Jy ! Component: 100 - total flux cleaned = 0.113456 Jy ! Total flux subtracted in 100 components = 0.113456 Jy ! Clean residual min=-0.006468 max=0.011313 Jy/beam ! Clean residual mean=-0.000004 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 0.113456 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.113456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.065142Jy sigma=1.526439 ! Fit after self-cal, rms=0.065028Jy sigma=1.524442 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.101 mas, bmaj=2.259 mas, bpa=-2.06 degrees ! Estimated noise=0.315217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016084 Jy ! Component: 100 - total flux cleaned = 0.0259915 Jy ! Component: 150 - total flux cleaned = 0.0327113 Jy ! Component: 200 - total flux cleaned = 0.0374119 Jy ! Total flux subtracted in 200 components = 0.0374119 Jy ! Clean residual min=-0.004327 max=0.009732 Jy/beam ! Clean residual mean=-0.000005 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.150868 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 49 components and 0.150868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.060567Jy sigma=1.408911 ! Fit after self-cal, rms=0.060400Jy sigma=1.404475 ! Inverting map ! Added new window around map position (3.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00914808 Jy ! Component: 100 - total flux cleaned = 0.0132568 Jy ! Component: 150 - total flux cleaned = 0.0161791 Jy ! Component: 200 - total flux cleaned = 0.0184091 Jy ! Total flux subtracted in 200 components = 0.0184091 Jy ! Clean residual min=-0.003211 max=0.003196 Jy/beam ! Clean residual mean=-0.000003 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.169277 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 89 components and 0.169277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059043Jy sigma=1.370235 ! Fit after self-cal, rms=0.058826Jy sigma=1.364550 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.101 x 2.259 at -2.06 degrees (North through East) ! Clean map min=-0.0024388 max=0.11315 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.01 KP 0.92 ! LA 1.03 NL 1.01 OV 1.00 PT 0.99 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.99 HN 1.06 KP 1.03 ! LA 1.01 MK 0.95 NL 0.99 OV 0.99 ! PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.03 KP 0.98 ! LA 0.98 NL 1.04 OV 0.99 PT 0.97 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.96 HN 0.98 KP 1.02 ! LA 0.95 MK 1.07 NL 1.00 OV 1.05 ! PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.10 KP 0.99 ! LA 0.95 NL 1.04 OV 1.05 PT 0.97 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.96 HN 0.98 KP 1.04 ! LA 0.97 MK 0.99 NL 0.98 OV 0.98 ! PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.03 KP 0.99 ! LA 0.97 NL 1.00 OV 1.02 PT 0.96 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.96 HN 1.00 KP 1.00 ! LA 0.97 MK 1.01 NL 1.04 OV 1.04 ! PT 0.96 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.01 KP 0.99 ! LA 0.99 NL 1.03 OV 0.98 PT 0.99 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 HN 0.87 KP 1.05 ! LA 0.98 MK 1.06 NL 0.95 OV 1.01 ! PT 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 0.99 ! LA 1.00 NL 0.93 OV 0.95 PT 0.89 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.99 HN 0.91 KP 1.05 ! LA 0.97 MK 1.10 NL 1.02 OV 0.97 ! PT 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.11 KP 1.09 ! LA 0.96 NL 1.00 OV 0.98 PT 0.98 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.95 HN 1.02 KP 1.05 ! LA 0.97 MK 0.94 NL 0.96 OV 0.98 ! PT 0.96 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.058826Jy sigma=1.364550 ! Fit after self-cal, rms=0.058288Jy sigma=1.354205 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=2.274 mas, bpa=-2.11 degrees ! Estimated noise=0.312484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250674 Jy ! Component: 100 - total flux cleaned = 0.00354441 Jy ! Component: 150 - total flux cleaned = 0.0042807 Jy ! Component: 200 - total flux cleaned = 0.00472613 Jy ! Total flux subtracted in 200 components = 0.00472613 Jy ! Clean residual min=-0.002281 max=0.002507 Jy/beam ! Clean residual mean=0.000000 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.174003 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 111 components and 0.174003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.058166Jy sigma=1.350979 ! Fit after self-cal, rms=0.058166Jy sigma=1.350228 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.058166Jy sigma=1.350228 ! Fit after self-cal, rms=0.058139Jy sigma=1.350048 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.104 mas, bmaj=2.274 mas, bpa=-2.111 degrees ! Estimated noise=0.312437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000982139 Jy ! Component: 100 - total flux cleaned = 0.00162024 Jy ! Component: 150 - total flux cleaned = 0.00210437 Jy ! Component: 200 - total flux cleaned = 0.0024202 Jy ! Total flux subtracted in 200 components = 0.0024202 Jy ! Clean residual min=-0.001971 max=0.002235 Jy/beam ! Clean residual mean=0.000001 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.176423 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 129 components and 0.176423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.058084Jy sigma=1.348674 ! Fit after self-cal, rms=0.058069Jy sigma=1.348368 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135747 Jy ! Component: 100 - total flux cleaned = 0.00136921 Jy ! Component: 150 - total flux cleaned = 0.00156171 Jy ! Component: 200 - total flux cleaned = 0.00180481 Jy ! Total flux subtracted in 200 components = 0.00180481 Jy ! Clean residual min=-0.001843 max=0.002100 Jy/beam ! Clean residual mean=0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.178228 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 148 components and 0.178228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057977Jy sigma=1.346492 ! Fit after self-cal, rms=0.057972Jy sigma=1.346363 ! Inverting map ! Added new window around map position (-1.2, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172204 Jy ! Component: 100 - total flux cleaned = 0.00243011 Jy ! Component: 150 - total flux cleaned = 0.00284623 Jy ! Component: 200 - total flux cleaned = 0.00302859 Jy ! Total flux subtracted in 200 components = 0.00302859 Jy ! Clean residual min=-0.001621 max=0.001976 Jy/beam ! Clean residual mean=0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.181256 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 164 components and 0.181256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057902Jy sigma=1.344834 ! Fit after self-cal, rms=0.057898Jy sigma=1.344772 ! Inverting map ! Added new window around map position (-45, 20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159933 Jy ! Component: 100 - total flux cleaned = 0.00215426 Jy ! Component: 150 - total flux cleaned = 0.00230083 Jy ! Component: 200 - total flux cleaned = 0.00235254 Jy ! Total flux subtracted in 200 components = 0.00235254 Jy ! Clean residual min=-0.001542 max=0.001510 Jy/beam ! Clean residual mean=0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.183609 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 186 components and 0.183609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057841Jy sigma=1.343528 ! Fit after self-cal, rms=0.057838Jy sigma=1.343457 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057838Jy sigma=1.343457 ! Fit after self-cal, rms=0.057790Jy sigma=1.343185 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=2.275 mas, bpa=-2.005 degrees ! Estimated noise=0.312101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417411 Jy ! Component: 100 - total flux cleaned = 0.000525548 Jy ! Component: 150 - total flux cleaned = 0.000625221 Jy ! Component: 200 - total flux cleaned = 0.000717414 Jy ! Total flux subtracted in 200 components = 0.000717414 Jy ! Clean residual min=-0.001501 max=0.001413 Jy/beam ! Clean residual mean=0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.184326 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 195 components and 0.184326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057767Jy sigma=1.342681 ! Fit after self-cal, rms=0.057767Jy sigma=1.342656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190061 Jy ! Component: 100 - total flux cleaned = 0.000233354 Jy ! Component: 150 - total flux cleaned = 0.000357018 Jy ! Component: 200 - total flux cleaned = 0.000454665 Jy ! Total flux subtracted in 200 components = 0.000454665 Jy ! Clean residual min=-0.001490 max=0.001360 Jy/beam ! Clean residual mean=0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.184781 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 209 components and 0.184781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057753Jy sigma=1.342340 ! Fit after self-cal, rms=0.057752Jy sigma=1.342326 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057752Jy sigma=1.342326 ! Fit after self-cal, rms=0.057759Jy sigma=1.342292 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=3.693 mas, bpa=-2.409 degrees ! Estimated noise=0.365259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301113 Jy ! Component: 100 - total flux cleaned = 0.000468814 Jy ! Component: 150 - total flux cleaned = 0.000607245 Jy ! Component: 200 - total flux cleaned = 0.000710848 Jy ! Total flux subtracted in 200 components = 0.000710848 Jy ! Clean residual min=-0.001476 max=0.001454 Jy/beam ! Clean residual mean=0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.185492 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 236 components and 0.185492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057751Jy sigma=1.342082 ! Fit after self-cal, rms=0.057749Jy sigma=1.342042 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.95365e-05 Jy ! Component: 100 - total flux cleaned = 0.000189484 Jy ! Component: 150 - total flux cleaned = 0.000249012 Jy ! Component: 200 - total flux cleaned = 0.000289666 Jy ! Total flux subtracted in 200 components = 0.000289666 Jy ! Clean residual min=-0.001451 max=0.001425 Jy/beam ! Clean residual mean=0.000002 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.185782 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 248 components and 0.185781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057745Jy sigma=1.341923 ! Fit after self-cal, rms=0.057744Jy sigma=1.341899 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=2.276 mas, bpa=-1.961 degrees ! Estimated noise=0.312001 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.106 x 2.276 at -1.961 degrees (North through East) ! Clean map min=-0.0013311 max=0.1119 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9069 mas, bmaj=1.956 mas, bpa=-1.622 degrees ! Estimated noise=0.477648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0886015 Jy ! Component: 100 - total flux cleaned = 0.113262 Jy ! Component: 150 - total flux cleaned = 0.126926 Jy ! Component: 200 - total flux cleaned = 0.136702 Jy ! Total flux subtracted in 200 components = 0.136702 Jy ! Clean residual min=-0.003876 max=0.005604 Jy/beam ! Clean residual mean=-0.000002 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.136702 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.136702 Jy ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=2.276 mas, bpa=-1.961 degrees ! Estimated noise=0.312001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101475 Jy ! Component: 100 - total flux cleaned = 0.0172064 Jy ! Component: 150 - total flux cleaned = 0.0223883 Jy ! Component: 200 - total flux cleaned = 0.0262839 Jy ! Total flux subtracted in 200 components = 0.0262839 Jy ! Clean residual min=-0.002407 max=0.002940 Jy/beam ! Clean residual mean=-0.000000 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.162986 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 93 components and 0.162986 Jy ! Inverting map ! Added new window around map position (24.6, -31.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322752 Jy ! Component: 100 - total flux cleaned = 0.00583636 Jy ! Component: 150 - total flux cleaned = 0.0080974 Jy ! Component: 200 - total flux cleaned = 0.0100787 Jy ! Total flux subtracted in 200 components = 0.0100787 Jy ! Clean residual min=-0.001930 max=0.001910 Jy/beam ! Clean residual mean=-0.000000 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.173065 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 134 components and 0.173065 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=3.693 mas, bpa=-2.409 degrees ! Estimated noise=0.365259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270201 Jy ! Component: 100 - total flux cleaned = 0.00463329 Jy ! Component: 150 - total flux cleaned = 0.00610961 Jy ! Component: 200 - total flux cleaned = 0.00729934 Jy ! Total flux subtracted in 200 components = 0.00729934 Jy ! Clean residual min=-0.001668 max=0.001444 Jy/beam ! Clean residual mean=0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.180364 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000924462 Jy ! Component: 100 - total flux cleaned = 0.00162321 Jy ! Component: 150 - total flux cleaned = 0.00208933 Jy ! Component: 200 - total flux cleaned = 0.0024007 Jy ! Total flux subtracted in 200 components = 0.0024007 Jy ! Clean residual min=-0.001480 max=0.001412 Jy/beam ! Clean residual mean=0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.182765 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 208 components and 0.182765 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=2.276 mas, bpa=-1.961 degrees ! Estimated noise=0.312001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503148 Jy ! Component: 100 - total flux cleaned = 0.000781504 Jy ! Component: 150 - total flux cleaned = 0.000922411 Jy ! Component: 200 - total flux cleaned = 0.0010494 Jy ! Total flux subtracted in 200 components = 0.0010494 Jy ! Clean residual min=-0.001488 max=0.001341 Jy/beam ! Clean residual mean=0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.183814 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 226 components and 0.183814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057780Jy sigma=1.342743 ! Fit after self-cal, rms=0.057765Jy sigma=1.342513 wmodel /scr/pima/bg219e_uvs/J1335-0511_X_map.mod ! Writing 226 model components to file: /scr/pima/bg219e_uvs/J1335-0511_X_map.mod wobs /scr/pima/bg219e_uvs/J1335-0511_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1335-0511_X_uvs.fits wwins /scr/pima/bg219e_uvs/J1335-0511_X_map.win ! wwins: Wrote 7 windows to /scr/pima/bg219e_uvs/J1335-0511_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000353337 Jy ! Component: 100 - total flux cleaned = -0.000425631 Jy ! Component: 150 - total flux cleaned = -0.000516932 Jy ! Component: 200 - total flux cleaned = -0.000646977 Jy ! Component: 250 - total flux cleaned = -0.000792997 Jy ! Component: 300 - total flux cleaned = -0.000893641 Jy ! Component: 350 - total flux cleaned = -0.000971708 Jy ! Component: 400 - total flux cleaned = -0.0011236 Jy ! Component: 450 - total flux cleaned = -0.00123422 Jy ! Component: 500 - total flux cleaned = -0.00130618 Jy ! Component: 550 - total flux cleaned = -0.00144705 Jy ! Component: 600 - total flux cleaned = -0.00154984 Jy ! Component: 650 - total flux cleaned = -0.00163308 Jy ! Component: 700 - total flux cleaned = -0.00163276 Jy ! Component: 750 - total flux cleaned = -0.00168089 Jy ! Component: 800 - total flux cleaned = -0.00164925 Jy ! Component: 850 - total flux cleaned = -0.00172641 Jy ! Component: 900 - total flux cleaned = -0.00169592 Jy ! Component: 950 - total flux cleaned = -0.00171074 Jy ! Component: 1000 - total flux cleaned = -0.00176918 Jy ! Component: 1050 - total flux cleaned = -0.00179786 Jy ! Component: 1100 - total flux cleaned = -0.00182634 Jy ! Component: 1150 - total flux cleaned = -0.00188253 Jy ! Component: 1200 - total flux cleaned = -0.00193756 Jy ! Component: 1250 - total flux cleaned = -0.00196484 Jy ! Component: 1300 - total flux cleaned = -0.00199191 Jy ! Component: 1350 - total flux cleaned = -0.00207116 Jy ! Component: 1400 - total flux cleaned = -0.00210999 Jy ! Component: 1450 - total flux cleaned = -0.00214844 Jy ! Component: 1500 - total flux cleaned = -0.00218622 Jy ! Component: 1550 - total flux cleaned = -0.00219881 Jy ! Component: 1600 - total flux cleaned = -0.0022112 Jy ! Component: 1650 - total flux cleaned = -0.00221142 Jy ! Component: 1700 - total flux cleaned = -0.00222363 Jy ! Component: 1750 - total flux cleaned = -0.00222348 Jy ! Component: 1800 - total flux cleaned = -0.00222337 Jy ! Component: 1850 - total flux cleaned = -0.00221171 Jy ! Component: 1900 - total flux cleaned = -0.00220033 Jy ! Component: 1950 - total flux cleaned = -0.00220016 Jy ! Component: 2000 - total flux cleaned = -0.00217787 Jy ! Component: 2050 - total flux cleaned = -0.00221126 Jy ! Component: 2100 - total flux cleaned = -0.00221115 Jy ! Component: 2150 - total flux cleaned = -0.00220038 Jy ! Component: 2200 - total flux cleaned = -0.00220044 Jy ! Component: 2250 - total flux cleaned = -0.00221118 Jy ! Component: 2300 - total flux cleaned = -0.00221111 Jy ! Component: 2350 - total flux cleaned = -0.00214837 Jy ! Component: 2400 - total flux cleaned = -0.00213797 Jy ! Component: 2450 - total flux cleaned = -0.00209681 Jy ! Component: 2500 - total flux cleaned = -0.00205622 Jy ! Component: 2550 - total flux cleaned = -0.00203626 Jy ! Component: 2600 - total flux cleaned = -0.0019765 Jy ! Component: 2650 - total flux cleaned = -0.00195666 Jy ! Component: 2700 - total flux cleaned = -0.00189784 Jy ! Component: 2750 - total flux cleaned = -0.00183945 Jy ! Component: 2800 - total flux cleaned = -0.00181055 Jy ! Component: 2850 - total flux cleaned = -0.00176268 Jy ! Component: 2900 - total flux cleaned = -0.00174364 Jy ! Component: 2950 - total flux cleaned = -0.00168714 Jy ! Component: 3000 - total flux cleaned = -0.0016499 Jy ! Component: 3050 - total flux cleaned = -0.00163139 Jy ! Component: 3100 - total flux cleaned = -0.00158557 Jy ! Component: 3150 - total flux cleaned = -0.00162217 Jy ! Component: 3200 - total flux cleaned = -0.00161313 Jy ! Component: 3250 - total flux cleaned = -0.00159524 Jy ! Component: 3300 - total flux cleaned = -0.00156853 Jy ! Component: 3350 - total flux cleaned = -0.00155977 Jy ! Component: 3400 - total flux cleaned = -0.00159499 Jy ! Component: 3450 - total flux cleaned = -0.00156871 Jy ! Component: 3500 - total flux cleaned = -0.00155146 Jy ! Component: 3550 - total flux cleaned = -0.00156008 Jy ! Component: 3600 - total flux cleaned = -0.00155145 Jy ! Component: 3650 - total flux cleaned = -0.00153451 Jy ! Component: 3700 - total flux cleaned = -0.00154301 Jy ! Component: 3750 - total flux cleaned = -0.00153474 Jy ! Component: 3800 - total flux cleaned = -0.00153475 Jy ! Component: 3850 - total flux cleaned = -0.00148516 Jy ! Component: 3900 - total flux cleaned = -0.0015016 Jy ! Component: 3950 - total flux cleaned = -0.00150979 Jy ! Component: 4000 - total flux cleaned = -0.0015178 Jy ! Component: 4050 - total flux cleaned = -0.00149371 Jy ! Total flux subtracted in 4096 components = -0.00151769 Jy ! Clean residual min=-0.000513 max=0.000532 Jy/beam ! Clean residual mean=0.000000 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.182297 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 483 components and 0.182297 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1335-0511_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.106 x 2.276 at -1.961 degrees (North through East) ! Clean map min=-0.0009267 max=0.11121 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1335-0511_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111209 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013216 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.356519 0.356519 0.713039 1.42608 2.85215 5.70431 11.4086 22.8172 45.6345 91.269 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.111 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 841.469 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1335-0511_X_uvs.log closed on Thu Apr 7 09:09:53 2016