! Started logfile: /scr/pima/bg219e_uvs/J1332-0509_X_uvs.log on Thu Apr 7 09:09:43 2016 obs /scr/pima/bg219e_uvs/J1332-0509_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1332-0509_X_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.858333 visibilities/baseline/integration-bin. ! Found source: J1332-0509 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 18540 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1332-0509_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.429635Jy sigma=24.794185 ! Fit after self-cal, rms=0.079913Jy sigma=1.345254 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7932 mas, bmaj=1.803 mas, bpa=4.746 degrees ! Estimated noise=0.617725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.790979 Jy ! Component: 100 - total flux cleaned = 0.963464 Jy ! Total flux subtracted in 100 components = 0.963464 Jy ! Clean residual min=-0.015200 max=0.048327 Jy/beam ! Clean residual mean=-0.000002 rms=0.004358 Jy/beam ! Combined flux in latest and established models = 0.963464 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.963464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.096337Jy sigma=1.639496 ! Fit after self-cal, rms=0.096332Jy sigma=1.639433 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456013 Jy ! Component: 100 - total flux cleaned = 0.065014 Jy ! Total flux subtracted in 100 components = 0.065014 Jy ! Clean residual min=-0.007987 max=0.010434 Jy/beam ! Clean residual mean=-0.000010 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 1.02848 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 1.02848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.071240Jy sigma=1.193415 ! Fit after self-cal, rms=0.071204Jy sigma=1.192882 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9438 mas, bmaj=2.089 mas, bpa=3.933 degrees ! Estimated noise=0.403068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120801 Jy ! Component: 100 - total flux cleaned = 0.0180255 Jy ! Component: 150 - total flux cleaned = 0.0216433 Jy ! Component: 200 - total flux cleaned = 0.0238866 Jy ! Total flux subtracted in 200 components = 0.0238866 Jy ! Clean residual min=-0.007047 max=0.008353 Jy/beam ! Clean residual mean=-0.000016 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 1.05236 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 1.05236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069145Jy sigma=1.158642 ! Fit after self-cal, rms=0.069116Jy sigma=1.158266 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9438 x 2.089 at 3.933 degrees (North through East) ! Clean map min=-0.006585 max=1.0157 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.03 KP 0.99 ! LA 0.99 MK 0.97 NL 1.01 OV 0.99 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.01 KP 1.01 ! LA 0.99 MK 0.99 NL 1.02 OV 0.99 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.00 KP 0.99 ! LA 0.98 MK 1.01 NL 1.01 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.01 KP 0.99 ! LA 0.98 MK 0.99 NL 1.02 OV 0.99 ! PT 0.99 SC 1.01 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00 KP 0.99 ! LA 0.98 MK 1.00 NL 1.01 OV 0.99 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.99 KP 0.98 ! LA 0.98 MK 1.06 NL 1.02 OV 0.99 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 0.99 ! LA 0.98 MK 1.01 NL 1.01 OV 0.99 ! PT 0.99 SC 0.99 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069116Jy sigma=1.158266 ! Fit after self-cal, rms=0.066098Jy sigma=1.106748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9448 mas, bmaj=2.095 mas, bpa=4.02 degrees ! Estimated noise=0.402925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198242 Jy ! Component: 100 - total flux cleaned = -0.00232479 Jy ! Component: 150 - total flux cleaned = -0.00254594 Jy ! Component: 200 - total flux cleaned = -0.00270795 Jy ! Total flux subtracted in 200 components = -0.00270795 Jy ! Clean residual min=-0.006642 max=0.006352 Jy/beam ! Clean residual mean=-0.000012 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 1.04966 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 1.04966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.066002Jy sigma=1.105403 ! Fit after self-cal, rms=0.065986Jy sigma=1.105231 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.065986Jy sigma=1.105231 ! Fit after self-cal, rms=0.062291Jy sigma=1.041070 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.944 mas, bmaj=2.095 mas, bpa=3.959 degrees ! Estimated noise=0.402758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198491 Jy ! Component: 100 - total flux cleaned = -0.000242042 Jy ! Component: 150 - total flux cleaned = -0.000280083 Jy ! Component: 200 - total flux cleaned = -0.000279842 Jy ! Total flux subtracted in 200 components = -0.000279842 Jy ! Clean residual min=-0.003523 max=0.004656 Jy/beam ! Clean residual mean=0.000000 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 1.04938 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 1.04938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062239Jy sigma=1.040172 ! Fit after self-cal, rms=0.062237Jy sigma=1.040122 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463167 Jy ! Component: 100 - total flux cleaned = 0.00738636 Jy ! Component: 150 - total flux cleaned = 0.00865023 Jy ! Component: 200 - total flux cleaned = 0.00957115 Jy ! Total flux subtracted in 200 components = 0.00957115 Jy ! Clean residual min=-0.002940 max=0.003840 Jy/beam ! Clean residual mean=-0.000000 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 1.05895 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 61 components and 1.05895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061820Jy sigma=1.033823 ! Fit after self-cal, rms=0.061807Jy sigma=1.033618 ! Inverting map ! Added new window around map position (2.4, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355871 Jy ! Component: 100 - total flux cleaned = 0.00550302 Jy ! Component: 150 - total flux cleaned = 0.00641125 Jy ! Component: 200 - total flux cleaned = 0.00675877 Jy ! Total flux subtracted in 200 components = 0.00675877 Jy ! Clean residual min=-0.002681 max=0.002679 Jy/beam ! Clean residual mean=0.000001 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.06571 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 1.06571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061563Jy sigma=1.029778 ! Fit after self-cal, rms=0.061547Jy sigma=1.029408 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061547Jy sigma=1.029408 ! Fit after self-cal, rms=0.061496Jy sigma=1.028864 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.944 mas, bmaj=2.095 mas, bpa=3.954 degrees ! Estimated noise=0.402563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016747 Jy ! Component: 100 - total flux cleaned = 0.00257728 Jy ! Component: 150 - total flux cleaned = 0.00284015 Jy ! Component: 200 - total flux cleaned = 0.00294232 Jy ! Total flux subtracted in 200 components = 0.00294232 Jy ! Clean residual min=-0.002528 max=0.002559 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 1.06865 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 1.06865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061431Jy sigma=1.027848 ! Fit after self-cal, rms=0.061430Jy sigma=1.027788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559964 Jy ! Component: 100 - total flux cleaned = 0.000702774 Jy ! Component: 150 - total flux cleaned = 0.000727666 Jy ! Component: 200 - total flux cleaned = 0.000751565 Jy ! Total flux subtracted in 200 components = 0.000751565 Jy ! Clean residual min=-0.002501 max=0.002569 Jy/beam ! Clean residual mean=0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 1.0694 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 103 components and 1.0694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061405Jy sigma=1.027439 ! Fit after self-cal, rms=0.061405Jy sigma=1.027426 ! Inverting map ! Added new window around map position (-36.8, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205508 Jy ! Component: 100 - total flux cleaned = 0.00262907 Jy ! Component: 150 - total flux cleaned = 0.00284991 Jy ! Component: 200 - total flux cleaned = 0.00307713 Jy ! Total flux subtracted in 200 components = 0.00307713 Jy ! Clean residual min=-0.002399 max=0.002289 Jy/beam ! Clean residual mean=0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 1.07248 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 125 components and 1.07248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061330Jy sigma=1.026310 ! Fit after self-cal, rms=0.061329Jy sigma=1.026217 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061329Jy sigma=1.026217 ! Fit after self-cal, rms=0.061312Jy sigma=1.026056 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.094 mas, bmaj=3.481 mas, bpa=0.2587 degrees ! Estimated noise=0.509928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107355 Jy ! Component: 100 - total flux cleaned = 0.00116852 Jy ! Component: 150 - total flux cleaned = 0.00117243 Jy ! Component: 200 - total flux cleaned = 0.00115033 Jy ! Total flux subtracted in 200 components = 0.00115033 Jy ! Clean residual min=-0.002344 max=0.002477 Jy/beam ! Clean residual mean=0.000001 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 1.07363 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 146 components and 1.07363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061296Jy sigma=1.025834 ! Fit after self-cal, rms=0.061297Jy sigma=1.025795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356662 Jy ! Component: 100 - total flux cleaned = 0.000315764 Jy ! Component: 150 - total flux cleaned = 0.00025912 Jy ! Component: 200 - total flux cleaned = 0.000187943 Jy ! Total flux subtracted in 200 components = 0.000187943 Jy ! Clean residual min=-0.002313 max=0.002414 Jy/beam ! Clean residual mean=0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 1.07382 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 161 components and 1.07382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061290Jy sigma=1.025723 ! Fit after self-cal, rms=0.061291Jy sigma=1.025709 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.944 mas, bmaj=2.095 mas, bpa=3.964 degrees ! Estimated noise=0.402512 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.944 x 2.095 at 3.964 degrees (North through East) ! Clean map min=-0.0020244 max=1.0155 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061291Jy sigma=1.025709 ! Fit after self-cal, rms=0.056939Jy sigma=0.931070 ! Inverting map and beam ! Estimated beam: bmin=0.9439 mas, bmaj=2.094 mas, bpa=4.009 degrees ! Estimated noise=0.402086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000716369 Jy ! Component: 100 - total flux cleaned = -0.000358967 Jy ! Component: 150 - total flux cleaned = 1.87593e-05 Jy ! Component: 200 - total flux cleaned = 0.00021857 Jy ! Total flux subtracted in 200 components = 0.00021857 Jy ! Clean residual min=-0.002199 max=0.002238 Jy/beam ! Clean residual mean=0.000001 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 1.07403 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 182 components and 1.07404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.056891Jy sigma=0.930375 ! Fit after self-cal, rms=0.056891Jy sigma=0.930362 ! Inverting map ! Added new window around map position (11.6, 14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170727 Jy ! Component: 100 - total flux cleaned = 0.00190729 Jy ! Component: 150 - total flux cleaned = 0.00209259 Jy ! Component: 200 - total flux cleaned = 0.0023786 Jy ! Total flux subtracted in 200 components = 0.0023786 Jy ! Clean residual min=-0.002101 max=0.002178 Jy/beam ! Clean residual mean=0.000000 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 1.07641 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 198 components and 1.07641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.056799Jy sigma=0.928937 ! Fit after self-cal, rms=0.056798Jy sigma=0.928901 ! Inverting map ! Added new window around map position (-4.4, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472205 Jy ! Component: 100 - total flux cleaned = 0.000813221 Jy ! Component: 150 - total flux cleaned = 0.0008189 Jy ! Component: 200 - total flux cleaned = 0.0008548 Jy ! Total flux subtracted in 200 components = 0.0008548 Jy ! Clean residual min=-0.001687 max=0.001829 Jy/beam ! Clean residual mean=0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 1.07727 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 216 components and 1.07727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.056687Jy sigma=0.927135 ! Fit after self-cal, rms=0.056681Jy sigma=0.927072 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.056681Jy sigma=0.927072 ! Fit after self-cal, rms=0.056604Jy sigma=0.926566 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7928 mas, bmaj=1.806 mas, bpa=4.912 degrees ! Estimated noise=0.616161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.788959 Jy ! Component: 100 - total flux cleaned = 0.961003 Jy ! Component: 150 - total flux cleaned = 1.00507 Jy ! Component: 200 - total flux cleaned = 1.02429 Jy ! Total flux subtracted in 200 components = 1.02429 Jy ! Clean residual min=-0.006018 max=0.008705 Jy/beam ! Clean residual mean=0.000002 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 1.02429 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.02429 Jy ! Inverting map and beam ! Estimated beam: bmin=0.944 mas, bmaj=2.094 mas, bpa=4.042 degrees ! Estimated noise=0.401647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110788 Jy ! Component: 100 - total flux cleaned = 0.0178318 Jy ! Component: 150 - total flux cleaned = 0.0224604 Jy ! Component: 200 - total flux cleaned = 0.0258251 Jy ! Total flux subtracted in 200 components = 0.0258251 Jy ! Clean residual min=-0.003078 max=0.003076 Jy/beam ! Clean residual mean=0.000001 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 1.05012 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 41 components and 1.05012 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.095 mas, bmaj=3.481 mas, bpa=0.2981 degrees ! Estimated noise=0.508894 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500269 Jy ! Component: 100 - total flux cleaned = 0.00852547 Jy ! Component: 150 - total flux cleaned = 0.0109809 Jy ! Component: 200 - total flux cleaned = 0.0128887 Jy ! Total flux subtracted in 200 components = 0.0128887 Jy ! Clean residual min=-0.002997 max=0.002830 Jy/beam ! Clean residual mean=0.000001 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 1.063 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016358 Jy ! Component: 100 - total flux cleaned = 0.00306686 Jy ! Component: 150 - total flux cleaned = 0.00432417 Jy ! Component: 200 - total flux cleaned = 0.00543411 Jy ! Total flux subtracted in 200 components = 0.00543411 Jy ! Clean residual min=-0.002543 max=0.002243 Jy/beam ! Clean residual mean=0.000001 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 1.06844 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 98 components and 1.06844 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.944 mas, bmaj=2.094 mas, bpa=4.042 degrees ! Estimated noise=0.401647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143275 Jy ! Component: 100 - total flux cleaned = 0.00210789 Jy ! Component: 150 - total flux cleaned = 0.00272119 Jy ! Component: 200 - total flux cleaned = 0.00328397 Jy ! Total flux subtracted in 200 components = 0.00328397 Jy ! Clean residual min=-0.002148 max=0.002188 Jy/beam ! Clean residual mean=0.000001 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 1.07172 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 124 components and 1.07172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.056786Jy sigma=0.929414 ! Fit after self-cal, rms=0.056763Jy sigma=0.929104 wmodel /scr/pima/bg219e_uvs/J1332-0509_X_map.mod ! Writing 124 model components to file: /scr/pima/bg219e_uvs/J1332-0509_X_map.mod wobs /scr/pima/bg219e_uvs/J1332-0509_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1332-0509_X_uvs.fits wwins /scr/pima/bg219e_uvs/J1332-0509_X_map.win ! wwins: Wrote 6 windows to /scr/pima/bg219e_uvs/J1332-0509_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152653 Jy ! Component: 100 - total flux cleaned = 0.000337158 Jy ! Component: 150 - total flux cleaned = 0.000439564 Jy ! Component: 200 - total flux cleaned = 0.000602477 Jy ! Component: 250 - total flux cleaned = 0.000664461 Jy ! Component: 300 - total flux cleaned = 0.000695109 Jy ! Component: 350 - total flux cleaned = 0.000724162 Jy ! Component: 400 - total flux cleaned = 0.00069558 Jy ! Component: 450 - total flux cleaned = 0.00069534 Jy ! Component: 500 - total flux cleaned = 0.000748143 Jy ! Component: 550 - total flux cleaned = 0.000851544 Jy ! Component: 600 - total flux cleaned = 0.000926951 Jy ! Component: 650 - total flux cleaned = 0.00102628 Jy ! Component: 700 - total flux cleaned = 0.00112307 Jy ! Component: 750 - total flux cleaned = 0.00126482 Jy ! Component: 800 - total flux cleaned = 0.00133461 Jy ! Component: 850 - total flux cleaned = 0.00144792 Jy ! Component: 900 - total flux cleaned = 0.00164685 Jy ! Component: 950 - total flux cleaned = 0.00168978 Jy ! Component: 1000 - total flux cleaned = 0.00179631 Jy ! Component: 1050 - total flux cleaned = 0.00185848 Jy ! Component: 1100 - total flux cleaned = 0.00200153 Jy ! Component: 1150 - total flux cleaned = 0.00206165 Jy ! Component: 1200 - total flux cleaned = 0.00212073 Jy ! Component: 1250 - total flux cleaned = 0.00215979 Jy ! Component: 1300 - total flux cleaned = 0.0023133 Jy ! Component: 1350 - total flux cleaned = 0.00231334 Jy ! Component: 1400 - total flux cleaned = 0.00236932 Jy ! Component: 1450 - total flux cleaned = 0.00246133 Jy ! Component: 1500 - total flux cleaned = 0.00249737 Jy ! Component: 1550 - total flux cleaned = 0.00251538 Jy ! Component: 1600 - total flux cleaned = 0.00258591 Jy ! Component: 1650 - total flux cleaned = 0.00258605 Jy ! Component: 1700 - total flux cleaned = 0.00265486 Jy ! Component: 1750 - total flux cleaned = 0.00267167 Jy ! Component: 1800 - total flux cleaned = 0.00272154 Jy ! Component: 1850 - total flux cleaned = 0.00277093 Jy ! Component: 1900 - total flux cleaned = 0.00285248 Jy ! Component: 1950 - total flux cleaned = 0.0028043 Jy ! Component: 2000 - total flux cleaned = 0.00288403 Jy ! Component: 2050 - total flux cleaned = 0.002947 Jy ! Component: 2100 - total flux cleaned = 0.0029469 Jy ! Component: 2150 - total flux cleaned = 0.00300864 Jy ! Component: 2200 - total flux cleaned = 0.00310014 Jy ! Component: 2250 - total flux cleaned = 0.00311521 Jy ! Component: 2300 - total flux cleaned = 0.0031452 Jy ! Component: 2350 - total flux cleaned = 0.00321904 Jy ! Component: 2400 - total flux cleaned = 0.00324837 Jy ! Component: 2450 - total flux cleaned = 0.00332108 Jy ! Component: 2500 - total flux cleaned = 0.00334989 Jy ! Component: 2550 - total flux cleaned = 0.00344945 Jy ! Component: 2600 - total flux cleaned = 0.00350547 Jy ! Component: 2650 - total flux cleaned = 0.00357506 Jy ! Component: 2700 - total flux cleaned = 0.00361625 Jy ! Component: 2750 - total flux cleaned = 0.00363021 Jy ! Component: 2800 - total flux cleaned = 0.00372506 Jy ! Component: 2850 - total flux cleaned = 0.00375189 Jy ! Component: 2900 - total flux cleaned = 0.00377845 Jy ! Component: 2950 - total flux cleaned = 0.00380485 Jy ! Component: 3000 - total flux cleaned = 0.00383084 Jy ! Component: 3050 - total flux cleaned = 0.00384378 Jy ! Component: 3100 - total flux cleaned = 0.00386942 Jy ! Component: 3150 - total flux cleaned = 0.00386922 Jy ! Component: 3200 - total flux cleaned = 0.003882 Jy ! Component: 3250 - total flux cleaned = 0.00384445 Jy ! Component: 3300 - total flux cleaned = 0.00393129 Jy ! Component: 3350 - total flux cleaned = 0.00390649 Jy ! Component: 3400 - total flux cleaned = 0.00388213 Jy ! Component: 3450 - total flux cleaned = 0.00387014 Jy ! Component: 3500 - total flux cleaned = 0.00389413 Jy ! Component: 3550 - total flux cleaned = 0.0038704 Jy ! Component: 3600 - total flux cleaned = 0.00388218 Jy ! Component: 3650 - total flux cleaned = 0.00390542 Jy ! Component: 3700 - total flux cleaned = 0.00389368 Jy ! Component: 3750 - total flux cleaned = 0.00384746 Jy ! Component: 3800 - total flux cleaned = 0.0038361 Jy ! Component: 3850 - total flux cleaned = 0.00384745 Jy ! Component: 3900 - total flux cleaned = 0.00381367 Jy ! Component: 3950 - total flux cleaned = 0.00380257 Jy ! Component: 4000 - total flux cleaned = 0.00381381 Jy ! Component: 4050 - total flux cleaned = 0.00384702 Jy ! Total flux subtracted in 4096 components = 0.00385795 Jy ! Clean residual min=-0.000678 max=0.000630 Jy/beam ! Clean residual mean=-0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 1.07558 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 409 components and 1.07558 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1332-0509_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.944 x 2.094 at 4.042 degrees (North through East) ! Clean map min=-0.0020205 max=1.015 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1332-0509_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.01499 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193602 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.057223 0.057223 0.114446 0.228892 0.457784 0.915568 1.83114 3.66227 7.32454 14.6491 29.2982 58.5963 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.014 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5242.65 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1332-0509_X_uvs.log closed on Thu Apr 7 09:09:48 2016