! Started logfile: /scr/pima/bg219e_uvs/J1331-0341_X_dfm.log on Thu May 19 18:41:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1331-0341_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1331-0341_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.814815 visibilities/baseline/integration-bin.
! Found source: J1331-0341
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21120 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1331-0341_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029490Jy  sigma=22.786189
! Fit after  self-cal, rms=0.777601Jy  sigma=17.132395
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7918 mas, bmaj=1.782 mas, bpa=2.665 degrees
! Estimated noise=0.401568 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.168686 Jy
! Component: 100  -  total flux cleaned = 0.207428 Jy
! Total flux subtracted in 100 components = 0.207428 Jy
! Clean residual min=-0.005545 max=0.014995 Jy/beam
! Clean residual mean=-0.000002 rms=0.001636 Jy/beam
! Combined flux in latest and established models = 0.207428 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.207428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069965Jy  sigma=1.493912
! Fit after  self-cal, rms=0.069919Jy  sigma=1.492927
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162694 Jy
! Component: 100  -  total flux cleaned = 0.0244095 Jy
! Total flux subtracted in 100 components = 0.0244095 Jy
! Clean residual min=-0.004301 max=0.007824 Jy/beam
! Clean residual mean=-0.000002 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.231838 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 7 components and 0.231838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064686Jy  sigma=1.366119
! Fit after  self-cal, rms=0.064642Jy  sigma=1.365091
! Inverting map 
! Added new window around map position (-1, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00709291 Jy
! Component: 100  -  total flux cleaned = 0.0107811 Jy
! Total flux subtracted in 100 components = 0.0107811 Jy
! Clean residual min=-0.003315 max=0.003533 Jy/beam
! Clean residual mean=-0.000002 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.242619 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 12 components and 0.242619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063592Jy  sigma=1.340331
! Fit after  self-cal, rms=0.063559Jy  sigma=1.339474
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.149 mas, bpa=1.491 degrees
! Estimated noise=0.227476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437794 Jy
! Component: 100  -  total flux cleaned = 0.00676471 Jy
! Component: 150  -  total flux cleaned = 0.00826968 Jy
! Component: 200  -  total flux cleaned = 0.00903621 Jy
! Total flux subtracted in 200 components = 0.00903621 Jy
! Clean residual min=-0.002337 max=0.002554 Jy/beam
! Clean residual mean=-0.000003 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.251655 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 35 components and 0.251655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063250Jy  sigma=1.332576
! Fit after  self-cal, rms=0.063235Jy  sigma=1.332054
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 2.149 at 1.491 degrees (North through East)
! Clean map  min=-0.0022825  max=0.22299 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.03     KP        1.00     
!   LA        1.00     MK        0.97     NL        1.03     OV        1.00     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.99     KP        1.00     
!   LA        1.00     MK        0.98     NL        1.04     OV        1.01     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        0.99     
!   LA        0.96     MK        1.04     NL        1.01     OV        1.03     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.03     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.01     OV        1.02     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.99     KP        1.00     
!   LA        0.97     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.97     
!   LA        0.99     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.95     MK        1.07     NL        1.03     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.01     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.01     KP        0.99     
!   LA        0.98     MK        1.00     NL        0.98     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.98     KP        0.96     
!   LA        0.97     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.96     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        0.98     
!   LA        0.96     MK        1.02     NL        0.97     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.063235Jy  sigma=1.332054
! Fit after  self-cal, rms=0.062776Jy  sigma=1.324299
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=2.153 mas, bpa=1.597 degrees
! Estimated noise=0.227268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000439617 Jy
! Component: 100  -  total flux cleaned = -0.000442555 Jy
! Component: 150  -  total flux cleaned = -0.000421592 Jy
! Component: 200  -  total flux cleaned = -0.0004029 Jy
! Total flux subtracted in 200 components = -0.0004029 Jy
! Clean residual min=-0.001620 max=0.001856 Jy/beam
! Clean residual mean=-0.000002 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.251252 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 0.251252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062759Jy  sigma=1.323900
! Fit after  self-cal, rms=0.062761Jy  sigma=1.323858
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062761Jy  sigma=1.323858
! Fit after  self-cal, rms=0.062455Jy  sigma=1.318044
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.152 mas, bpa=1.57 degrees
! Estimated noise=0.226979 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032379 Jy
! Component: 100  -  total flux cleaned = 0.000250757 Jy
! Component: 150  -  total flux cleaned = 0.000189736 Jy
! Component: 200  -  total flux cleaned = 0.000179574 Jy
! Total flux subtracted in 200 components = 0.000179574 Jy
! Clean residual min=-0.001370 max=0.001322 Jy/beam
! Clean residual mean=-0.000000 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.251432 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 44 components and 0.251432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062448Jy  sigma=1.317920
! Fit after  self-cal, rms=0.062448Jy  sigma=1.317885
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.31645e-06 Jy
! Component: 100  -  total flux cleaned = -5.26974e-05 Jy
! Component: 150  -  total flux cleaned = -9.56772e-05 Jy
! Component: 200  -  total flux cleaned = -0.000111297 Jy
! Total flux subtracted in 200 components = -0.000111297 Jy
! Clean residual min=-0.001365 max=0.001316 Jy/beam
! Clean residual mean=-0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.25132 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.25132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062445Jy  sigma=1.317833
! Fit after  self-cal, rms=0.062444Jy  sigma=1.317825
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062444Jy  sigma=1.317825
! Fit after  self-cal, rms=0.062443Jy  sigma=1.317815
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.151 mas, bpa=1.559 degrees
! Estimated noise=0.227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157875 Jy
! Component: 100  -  total flux cleaned = 0.000132809 Jy
! Component: 150  -  total flux cleaned = 0.000125401 Jy
! Component: 200  -  total flux cleaned = 0.000118027 Jy
! Total flux subtracted in 200 components = 0.000118027 Jy
! Clean residual min=-0.001352 max=0.001309 Jy/beam
! Clean residual mean=-0.000000 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.251438 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.251438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062440Jy  sigma=1.317778
! Fit after  self-cal, rms=0.062440Jy  sigma=1.317772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.33233e-05 Jy
! Component: 100  -  total flux cleaned = 2.10092e-05 Jy
! Component: 150  -  total flux cleaned = 1.38764e-05 Jy
! Component: 200  -  total flux cleaned = 7.43799e-06 Jy
! Total flux subtracted in 200 components = 7.43799e-06 Jy
! Clean residual min=-0.001348 max=0.001307 Jy/beam
! Clean residual mean=-0.000000 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.251446 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.251446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062438Jy  sigma=1.317745
! Fit after  self-cal, rms=0.062438Jy  sigma=1.317739
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062438Jy  sigma=1.317739
! Fit after  self-cal, rms=0.062456Jy  sigma=1.317739
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.165 mas, bmaj=3.539 mas, bpa=-2.264 degrees
! Estimated noise=0.271605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467002 Jy
! Component: 100  -  total flux cleaned = 0.000516934 Jy
! Component: 150  -  total flux cleaned = 0.000522227 Jy
! Component: 200  -  total flux cleaned = 0.0005224 Jy
! Total flux subtracted in 200 components = 0.0005224 Jy
! Clean residual min=-0.001209 max=0.001470 Jy/beam
! Clean residual mean=-0.000000 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.251968 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 55 components and 0.251968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062457Jy  sigma=1.317761
! Fit after  self-cal, rms=0.062457Jy  sigma=1.317750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.64621e-05 Jy
! Component: 100  -  total flux cleaned = 4.15109e-05 Jy
! Component: 150  -  total flux cleaned = 4.48952e-05 Jy
! Component: 200  -  total flux cleaned = 4.49127e-05 Jy
! Total flux subtracted in 200 components = 4.49127e-05 Jy
! Clean residual min=-0.001203 max=0.001441 Jy/beam
! Clean residual mean=-0.000000 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.252013 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.252013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062457Jy  sigma=1.317761
! Fit after  self-cal, rms=0.062457Jy  sigma=1.317763
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.15 mas, bpa=1.553 degrees
! Estimated noise=0.227071 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 2.15 at 1.553 degrees (North through East)
! Clean map  min=-0.0012568  max=0.22286 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7909 mas, bmaj=1.782 mas, bpa=2.764 degrees
! Estimated noise=0.400949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.168333 Jy
! Component: 100  -  total flux cleaned = 0.20753 Jy
! Component: 150  -  total flux cleaned = 0.224879 Jy
! Component: 200  -  total flux cleaned = 0.233962 Jy
! Total flux subtracted in 200 components = 0.233962 Jy
! Clean residual min=-0.003352 max=0.004298 Jy/beam
! Clean residual mean=-0.000001 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.233962 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.233962 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.15 mas, bpa=1.553 degrees
! Estimated noise=0.227071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00791494 Jy
! Component: 100  -  total flux cleaned = 0.0118184 Jy
! Component: 150  -  total flux cleaned = 0.0140223 Jy
! Component: 200  -  total flux cleaned = 0.0153902 Jy
! Total flux subtracted in 200 components = 0.0153902 Jy
! Clean residual min=-0.001422 max=0.001287 Jy/beam
! Clean residual mean=-0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.249352 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 31 components and 0.249352 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.165 mas, bmaj=3.539 mas, bpa=-2.264 degrees
! Estimated noise=0.271605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134073 Jy
! Component: 100  -  total flux cleaned = 0.00196731 Jy
! Component: 150  -  total flux cleaned = 0.00223769 Jy
! Component: 200  -  total flux cleaned = 0.00229006 Jy
! Total flux subtracted in 200 components = 0.00229006 Jy
! Clean residual min=-0.001228 max=0.001419 Jy/beam
! Clean residual mean=-0.000000 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.251642 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.70783e-05 Jy
! Component: 100  -  total flux cleaned = 8.1413e-05 Jy
! Component: 150  -  total flux cleaned = 0.000120593 Jy
! Component: 200  -  total flux cleaned = 0.000127897 Jy
! Total flux subtracted in 200 components = 0.000127897 Jy
! Clean residual min=-0.001216 max=0.001420 Jy/beam
! Clean residual mean=-0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.25177 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 44 components and 0.25177 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.15 mas, bpa=1.553 degrees
! Estimated noise=0.227071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000175639 Jy
! Component: 100  -  total flux cleaned = -0.000207742 Jy
! Component: 150  -  total flux cleaned = -0.00023556 Jy
! Component: 200  -  total flux cleaned = -0.000201307 Jy
! Total flux subtracted in 200 components = -0.000201307 Jy
! Clean residual min=-0.001304 max=0.001279 Jy/beam
! Clean residual mean=-0.000000 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.251569 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 53 components and 0.251569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062463Jy  sigma=1.317868
! Fit after  self-cal, rms=0.062462Jy  sigma=1.317846
wmodel /J1331-0341_X_map.mod
! wmodel: Unable to open new model file: /J1331-0341_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1331-0341_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 2.15 at 1.553 degrees (North through East)
! Clean map  min=-0.0012473  max=0.22305 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1331-0341_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.223049 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000304164 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.4091 0.4091 0.818201 1.6364 3.2728 6.5456 13.0912 26.1824 52.3648
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.223 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  733.316 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1331-0341_X_dfm.log closed on Thu May 19 18:41:15 2016