! Started logfile: /scr/pima/bg219e_uvs/J1326-0500_X_dfm.log on Thu May 19 18:40:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1326-0500_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1326-0500_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.720219 visibilities/baseline/integration-bin.
! Found source: J1326-0500
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23724 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1326-0500_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006394Jy  sigma=23.159888
! Fit after  self-cal, rms=0.863332Jy  sigma=19.847369
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7776 mas, bmaj=1.743 mas, bpa=4.342 degrees
! Estimated noise=0.446859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103743 Jy
! Component: 100  -  total flux cleaned = 0.127766 Jy
! Total flux subtracted in 100 components = 0.127766 Jy
! Clean residual min=-0.004068 max=0.008927 Jy/beam
! Clean residual mean=0.000002 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.127766 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.127766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063974Jy  sigma=1.399365
! Fit after  self-cal, rms=0.063818Jy  sigma=1.396062
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00960272 Jy
! Component: 100  -  total flux cleaned = 0.0144329 Jy
! Total flux subtracted in 100 components = 0.0144329 Jy
! Clean residual min=-0.002675 max=0.002866 Jy/beam
! Clean residual mean=0.000002 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.142199 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 11 components and 0.142199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062135Jy  sigma=1.353728
! Fit after  self-cal, rms=0.062150Jy  sigma=1.353615
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.068 mas, bmaj=2.287 mas, bpa=-3.267 degrees
! Estimated noise=0.216697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324828 Jy
! Component: 100  -  total flux cleaned = 0.00433566 Jy
! Component: 150  -  total flux cleaned = 0.00448173 Jy
! Component: 200  -  total flux cleaned = 0.00448334 Jy
! Total flux subtracted in 200 components = 0.00448334 Jy
! Clean residual min=-0.001678 max=0.002315 Jy/beam
! Clean residual mean=0.000000 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.146682 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.146682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062000Jy  sigma=1.350316
! Fit after  self-cal, rms=0.062003Jy  sigma=1.350309
! Inverting map 
! Added new window around map position (-1.4, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192052 Jy
! Component: 100  -  total flux cleaned = 0.0020685 Jy
! Component: 150  -  total flux cleaned = 0.00201917 Jy
! Component: 200  -  total flux cleaned = 0.00199876 Jy
! Total flux subtracted in 200 components = 0.00199876 Jy
! Clean residual min=-0.001527 max=0.001475 Jy/beam
! Clean residual mean=0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.148681 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.148681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061942Jy  sigma=1.348904
! Fit after  self-cal, rms=0.061933Jy  sigma=1.348760
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.068 x 2.287 at -3.267 degrees (North through East)
! Clean map  min=-0.0014458  max=0.13836 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.98     MK        0.95     NL        1.00     OV        1.01     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.99     KP        1.00     
!   LA        1.01     MK        0.93     NL        1.01     OV        0.99     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.96     
!   LA        0.99     MK        1.01     NL        0.98     OV        1.01     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        0.99     
!   LA        1.00     MK        0.97     NL        1.03     OV        1.02     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.95     KP        1.00     
!   LA        1.00     MK        1.04     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.02     KP        0.96     
!   LA        1.01     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.04     NL        1.03     OV        0.99     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.97     
!   LA        1.02     MK        1.02     NL        0.96     OV        1.03     
!   PT        1.04     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.03     OV        1.02     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.00     KP        0.98     
!   LA        1.04     MK        1.08     NL        1.01     OV        1.02     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.08     KP        0.99     
!   LA        0.99     MK        0.97     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.97     KP        1.01     
!   LA        0.99     MK        1.04     NL        1.02     OV        0.98     
!   PT        1.04     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.061933Jy  sigma=1.348760
! Fit after  self-cal, rms=0.061983Jy  sigma=1.345531
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.288 mas, bpa=-3.227 degrees
! Estimated noise=0.216736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.39838e-05 Jy
! Component: 100  -  total flux cleaned = 1.63072e-05 Jy
! Component: 150  -  total flux cleaned = -1.80461e-05 Jy
! Component: 200  -  total flux cleaned = -4.89529e-05 Jy
! Total flux subtracted in 200 components = -4.89529e-05 Jy
! Clean residual min=-0.001466 max=0.001419 Jy/beam
! Clean residual mean=0.000001 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.148632 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 45 components and 0.148632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061972Jy  sigma=1.345304
! Fit after  self-cal, rms=0.061972Jy  sigma=1.345251
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061972Jy  sigma=1.345251
! Fit after  self-cal, rms=0.061910Jy  sigma=1.341835
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.285 mas, bpa=-3.21 degrees
! Estimated noise=0.216647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235825 Jy
! Component: 100  -  total flux cleaned = 0.000208167 Jy
! Component: 150  -  total flux cleaned = 0.000196186 Jy
! Component: 200  -  total flux cleaned = 0.000196327 Jy
! Total flux subtracted in 200 components = 0.000196327 Jy
! Clean residual min=-0.001313 max=0.001438 Jy/beam
! Clean residual mean=0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.148828 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 54 components and 0.148828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061904Jy  sigma=1.341694
! Fit after  self-cal, rms=0.061909Jy  sigma=1.341646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.8, 21.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000755515 Jy
! Component: 100  -  total flux cleaned = 0.000673005 Jy
! Component: 150  -  total flux cleaned = 0.00069338 Jy
! Component: 200  -  total flux cleaned = 0.000742985 Jy
! Total flux subtracted in 200 components = 0.000742985 Jy
! Clean residual min=-0.000983 max=0.001143 Jy/beam
! Clean residual mean=0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.149571 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 76 components and 0.149571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061883Jy  sigma=1.340963
! Fit after  self-cal, rms=0.061881Jy  sigma=1.340931
! Inverting map 
! Added new window around map position (49.6, -17.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000759014 Jy
! Component: 100  -  total flux cleaned = 0.000947329 Jy
! Component: 150  -  total flux cleaned = 0.00111129 Jy
! Component: 200  -  total flux cleaned = 0.00121012 Jy
! Total flux subtracted in 200 components = 0.00121012 Jy
! Clean residual min=-0.001046 max=0.001042 Jy/beam
! Clean residual mean=0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.150781 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.150781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061863Jy  sigma=1.340532
! Fit after  self-cal, rms=0.061862Jy  sigma=1.340507
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061862Jy  sigma=1.340507
! Fit after  self-cal, rms=0.061794Jy  sigma=1.340471
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.285 mas, bpa=-3.193 degrees
! Estimated noise=0.2164 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247533 Jy
! Component: 100  -  total flux cleaned = 0.000357199 Jy
! Component: 150  -  total flux cleaned = 0.000415749 Jy
! Component: 200  -  total flux cleaned = 0.000458265 Jy
! Total flux subtracted in 200 components = 0.000458265 Jy
! Clean residual min=-0.000993 max=0.001000 Jy/beam
! Clean residual mean=0.000001 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.151239 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 103 components and 0.151239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061787Jy  sigma=1.340317
! Fit after  self-cal, rms=0.061787Jy  sigma=1.340313
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129724 Jy
! Component: 100  -  total flux cleaned = 0.000169516 Jy
! Component: 150  -  total flux cleaned = 0.000207477 Jy
! Component: 200  -  total flux cleaned = 0.000231526 Jy
! Total flux subtracted in 200 components = 0.000231526 Jy
! Clean residual min=-0.000979 max=0.000989 Jy/beam
! Clean residual mean=0.000001 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.151471 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 111 components and 0.151471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061782Jy  sigma=1.340214
! Fit after  self-cal, rms=0.061782Jy  sigma=1.340213
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061782Jy  sigma=1.340213
! Fit after  self-cal, rms=0.061782Jy  sigma=1.340204
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=3.74 mas, bpa=-3.642 degrees
! Estimated noise=0.254454 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112513 Jy
! Component: 100  -  total flux cleaned = 0.000100405 Jy
! Component: 150  -  total flux cleaned = 0.000132495 Jy
! Component: 200  -  total flux cleaned = 0.000177108 Jy
! Total flux subtracted in 200 components = 0.000177108 Jy
! Clean residual min=-0.001079 max=0.000966 Jy/beam
! Clean residual mean=0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.151648 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 0.151648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061782Jy  sigma=1.340169
! Fit after  self-cal, rms=0.061782Jy  sigma=1.340159
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.13583e-05 Jy
! Component: 100  -  total flux cleaned = 7.55959e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103835 Jy
! Component: 200  -  total flux cleaned = 0.00012328 Jy
! Total flux subtracted in 200 components = 0.00012328 Jy
! Clean residual min=-0.001046 max=0.000922 Jy/beam
! Clean residual mean=0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.151771 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 141 components and 0.151771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061782Jy  sigma=1.340149
! Fit after  self-cal, rms=0.061782Jy  sigma=1.340148
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.286 mas, bpa=-3.186 degrees
! Estimated noise=0.216373 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.069 x 2.286 at -3.186 degrees (North through East)
! Clean map  min=-0.00087426  max=0.13833 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7851 mas, bmaj=1.746 mas, bpa=4.059 degrees
! Estimated noise=0.451606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104911 Jy
! Component: 100  -  total flux cleaned = 0.128999 Jy
! Component: 150  -  total flux cleaned = 0.137913 Jy
! Component: 200  -  total flux cleaned = 0.142309 Jy
! Total flux subtracted in 200 components = 0.142309 Jy
! Clean residual min=-0.002469 max=0.002500 Jy/beam
! Clean residual mean=0.000003 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.142309 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.142309 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.286 mas, bpa=-3.186 degrees
! Estimated noise=0.216373 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306821 Jy
! Component: 100  -  total flux cleaned = 0.00497929 Jy
! Component: 150  -  total flux cleaned = 0.00642362 Jy
! Component: 200  -  total flux cleaned = 0.00733064 Jy
! Total flux subtracted in 200 components = 0.00733064 Jy
! Clean residual min=-0.001310 max=0.001163 Jy/beam
! Clean residual mean=0.000001 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.14964 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 36 components and 0.14964 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=3.74 mas, bpa=-3.642 degrees
! Estimated noise=0.254454 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101555 Jy
! Component: 100  -  total flux cleaned = 0.00131781 Jy
! Component: 150  -  total flux cleaned = 0.00159067 Jy
! Component: 200  -  total flux cleaned = 0.00184213 Jy
! Total flux subtracted in 200 components = 0.00184213 Jy
! Clean residual min=-0.001207 max=0.001141 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.151482 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000163104 Jy
! Component: 100  -  total flux cleaned = 0.000260784 Jy
! Component: 150  -  total flux cleaned = 0.000347824 Jy
! Component: 200  -  total flux cleaned = 0.000413417 Jy
! Total flux subtracted in 200 components = 0.000413417 Jy
! Clean residual min=-0.001090 max=0.001038 Jy/beam
! Clean residual mean=0.000001 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.151895 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 82 components and 0.151895 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.069 mas, bmaj=2.286 mas, bpa=-3.186 degrees
! Estimated noise=0.216373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156458 Jy
! Component: 100  -  total flux cleaned = 6.68428e-05 Jy
! Component: 150  -  total flux cleaned = 0.000157356 Jy
! Component: 200  -  total flux cleaned = 0.000199575 Jy
! Total flux subtracted in 200 components = 0.000199575 Jy
! Clean residual min=-0.001070 max=0.001039 Jy/beam
! Clean residual mean=0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.152095 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 103 components and 0.152095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061818Jy  sigma=1.340807
! Fit after  self-cal, rms=0.061813Jy  sigma=1.340760
wmodel /J1326-0500_X_map.mod
! wmodel: Unable to open new model file: /J1326-0500_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1326-0500_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.069 x 2.286 at -3.186 degrees (North through East)
! Clean map  min=-0.00099119  max=0.13842 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1326-0500_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.138419 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000249095 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.539873 0.539873 1.07975 2.15949 4.31898 8.63796 17.2759 34.5519 69.1037
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.138 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  555.686 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1326-0500_X_dfm.log closed on Thu May 19 18:40:51 2016