! Started logfile: /scr/pima/bg219e_uvs/J1326+5712_S_dfm.log on Thu May 19 18:40:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1326+5712_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1326+5712_S_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.899123 visibilities/baseline/integration-bin.
! Found source: J1326+5712
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7380 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1326+5712_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.049014Jy  sigma=22.558639
! Fit after  self-cal, rms=0.735284Jy  sigma=15.976892
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.202 mas, bmaj=5.186 mas, bpa=63.16 degrees
! Estimated noise=0.609376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194592 Jy
! Component: 100  -  total flux cleaned = 0.276144 Jy
! Total flux subtracted in 100 components = 0.276144 Jy
! Clean residual min=-0.020071 max=0.045443 Jy/beam
! Clean residual mean=-0.000127 rms=0.006051 Jy/beam
! Combined flux in latest and established models = 0.276144 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.276144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124337Jy  sigma=2.634140
! Fit after  self-cal, rms=0.123384Jy  sigma=2.614773
! Inverting map 
! Added new window around map position (2, -4.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0533823 Jy
! Component: 100  -  total flux cleaned = 0.086732 Jy
! Total flux subtracted in 100 components = 0.086732 Jy
! Clean residual min=-0.013923 max=0.023210 Jy/beam
! Clean residual mean=-0.000056 rms=0.003496 Jy/beam
! Combined flux in latest and established models = 0.362876 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 36 components and 0.362876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085607Jy  sigma=1.798473
! Fit after  self-cal, rms=0.084591Jy  sigma=1.778854
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0261473 Jy
! Component: 100  -  total flux cleaned = 0.0408288 Jy
! Total flux subtracted in 100 components = 0.0408288 Jy
! Clean residual min=-0.010386 max=0.016580 Jy/beam
! Clean residual mean=-0.000022 rms=0.002429 Jy/beam
! Combined flux in latest and established models = 0.403705 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.403705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072873Jy  sigma=1.520255
! Fit after  self-cal, rms=0.072109Jy  sigma=1.505298
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153118 Jy
! Component: 100  -  total flux cleaned = 0.0208852 Jy
! Total flux subtracted in 100 components = 0.0208852 Jy
! Clean residual min=-0.008160 max=0.011889 Jy/beam
! Clean residual mean=-0.000004 rms=0.001881 Jy/beam
! Combined flux in latest and established models = 0.42459 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 58 components and 0.42459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068107Jy  sigma=1.415756
! Fit after  self-cal, rms=0.067760Jy  sigma=1.408564
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.909 mas, bmaj=6.348 mas, bpa=64.76 degrees
! Estimated noise=0.39567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108645 Jy
! Component: 100  -  total flux cleaned = 0.0153433 Jy
! Component: 150  -  total flux cleaned = 0.015832 Jy
! Component: 200  -  total flux cleaned = 0.0163805 Jy
! Total flux subtracted in 200 components = 0.0163805 Jy
! Clean residual min=-0.006033 max=0.007146 Jy/beam
! Clean residual mean=0.000032 rms=0.001373 Jy/beam
! Combined flux in latest and established models = 0.440971 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 72 components and 0.440971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065953Jy  sigma=1.367845
! Fit after  self-cal, rms=0.065640Jy  sigma=1.361260
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.909 x 6.348 at 64.76 degrees (North through East)
! Clean map  min=-0.0059349  max=0.23481 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.00     KP        0.97     
!   LA        0.99     NL        0.98     OV        0.98     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.01     KP        0.98     
!   LA        1.01     NL        1.00     OV        0.99     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.00     NL        0.92     OV        1.00     PT        1.01     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.00     KP        1.01     
!   LA        1.03     NL        0.99     OV        1.03     PT        1.03     
!   SC        1.07     
! 
! 
! Fit before self-cal, rms=0.065640Jy  sigma=1.361260
! Fit after  self-cal, rms=0.064745Jy  sigma=1.336736
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.939 mas, bmaj=6.375 mas, bpa=64.94 degrees
! Estimated noise=0.396626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111978 Jy
! Component: 100  -  total flux cleaned = 0.000976017 Jy
! Component: 150  -  total flux cleaned = 0.000569795 Jy
! Component: 200  -  total flux cleaned = 0.000393685 Jy
! Total flux subtracted in 200 components = 0.000393685 Jy
! Clean residual min=-0.004389 max=0.004625 Jy/beam
! Clean residual mean=0.000028 rms=0.001121 Jy/beam
! Combined flux in latest and established models = 0.441364 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.441364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064249Jy  sigma=1.325048
! Fit after  self-cal, rms=0.064073Jy  sigma=1.321592
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064073Jy  sigma=1.321592
! Fit after  self-cal, rms=0.063749Jy  sigma=1.308635
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.97 mas, bmaj=6.348 mas, bpa=66.05 degrees
! Estimated noise=0.396872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125627 Jy
! Component: 100  -  total flux cleaned = 0.000438606 Jy
! Component: 150  -  total flux cleaned = 0.000769383 Jy
! Component: 200  -  total flux cleaned = 0.000911617 Jy
! Total flux subtracted in 200 components = 0.000911617 Jy
! Clean residual min=-0.003883 max=0.003804 Jy/beam
! Clean residual mean=0.000005 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.442276 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 88 components and 0.442276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063429Jy  sigma=1.302187
! Fit after  self-cal, rms=0.063319Jy  sigma=1.300032
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217591 Jy
! Component: 100  -  total flux cleaned = 0.000379878 Jy
! Component: 150  -  total flux cleaned = 0.000500796 Jy
! Component: 200  -  total flux cleaned = 0.000554514 Jy
! Total flux subtracted in 200 components = 0.000554514 Jy
! Clean residual min=-0.003535 max=0.003691 Jy/beam
! Clean residual mean=0.000006 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.44283 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 92 components and 0.44283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063116Jy  sigma=1.296108
! Fit after  self-cal, rms=0.063037Jy  sigma=1.294555
! Inverting map 
! Added new window around map position (-71, -38.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116598 Jy
! Component: 100  -  total flux cleaned = 0.000813668 Jy
! Component: 150  -  total flux cleaned = 0.000608086 Jy
! Component: 200  -  total flux cleaned = 0.000600819 Jy
! Total flux subtracted in 200 components = 0.000600819 Jy
! Clean residual min=-0.003000 max=0.003411 Jy/beam
! Clean residual mean=0.000006 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.443431 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 108 components and 0.443431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062670Jy  sigma=1.287270
! Fit after  self-cal, rms=0.062649Jy  sigma=1.286870
! Inverting map 
! Added new window around map position (34.5, 31.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231571 Jy
! Component: 100  -  total flux cleaned = 0.00221842 Jy
! Component: 150  -  total flux cleaned = 0.00230037 Jy
! Component: 200  -  total flux cleaned = 0.00245353 Jy
! Total flux subtracted in 200 components = 0.00245353 Jy
! Clean residual min=-0.002580 max=0.002770 Jy/beam
! Clean residual mean=0.000006 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.445885 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 128 components and 0.445885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062340Jy  sigma=1.281261
! Fit after  self-cal, rms=0.062327Jy  sigma=1.281031
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062327Jy  sigma=1.281031
! Fit after  self-cal, rms=0.061978Jy  sigma=1.280448
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.942 mas, bmaj=6.351 mas, bpa=65.86 degrees
! Estimated noise=0.395507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000428573 Jy
! Component: 100  -  total flux cleaned = 0.000226791 Jy
! Component: 150  -  total flux cleaned = 3.50291e-05 Jy
! Component: 200  -  total flux cleaned = -0.000146907 Jy
! Total flux subtracted in 200 components = -0.000146907 Jy
! Clean residual min=-0.002416 max=0.002540 Jy/beam
! Clean residual mean=0.000004 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.445738 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 143 components and 0.445738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061840Jy  sigma=1.277695
! Fit after  self-cal, rms=0.061831Jy  sigma=1.277547
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299148 Jy
! Component: 100  -  total flux cleaned = 0.000129979 Jy
! Component: 150  -  total flux cleaned = 2.5284e-05 Jy
! Component: 200  -  total flux cleaned = -2.33337e-05 Jy
! Total flux subtracted in 200 components = -2.33337e-05 Jy
! Clean residual min=-0.002387 max=0.002369 Jy/beam
! Clean residual mean=0.000005 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.445714 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 155 components and 0.445714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061737Jy  sigma=1.275714
! Fit after  self-cal, rms=0.061731Jy  sigma=1.275595
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061731Jy  sigma=1.275595
! Fit after  self-cal, rms=0.061583Jy  sigma=1.275499
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.395 mas, bmaj=9.202 mas, bpa=-85.45 degrees
! Estimated noise=0.462249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00095809 Jy
! Component: 100  -  total flux cleaned = 0.000773976 Jy
! Component: 150  -  total flux cleaned = 0.00058634 Jy
! Component: 200  -  total flux cleaned = 0.000356946 Jy
! Total flux subtracted in 200 components = 0.000356946 Jy
! Clean residual min=-0.002056 max=0.002149 Jy/beam
! Clean residual mean=0.000008 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.446071 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 171 components and 0.446071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061549Jy  sigma=1.274776
! Fit after  self-cal, rms=0.061541Jy  sigma=1.274648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103033 Jy
! Component: 100  -  total flux cleaned = -0.000109664 Jy
! Component: 150  -  total flux cleaned = -0.000231384 Jy
! Component: 200  -  total flux cleaned = -0.000368087 Jy
! Total flux subtracted in 200 components = -0.000368087 Jy
! Clean residual min=-0.001974 max=0.002042 Jy/beam
! Clean residual mean=0.000009 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.445703 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 181 components and 0.445703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061519Jy  sigma=1.274183
! Fit after  self-cal, rms=0.061514Jy  sigma=1.274089
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.926 mas, bmaj=6.353 mas, bpa=65.72 degrees
! Estimated noise=0.394926 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.926 x 6.353 at 65.72 degrees (North through East)
! Clean map  min=-0.0023385  max=0.23102 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.213 mas, bmaj=5.207 mas, bpa=64.26 degrees
! Estimated noise=0.612214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.202038 Jy
! Component: 100  -  total flux cleaned = 0.289141 Jy
! Component: 150  -  total flux cleaned = 0.338984 Jy
! Component: 200  -  total flux cleaned = 0.37025 Jy
! Total flux subtracted in 200 components = 0.37025 Jy
! Clean residual min=-0.008601 max=0.016856 Jy/beam
! Clean residual mean=-0.000060 rms=0.002591 Jy/beam
! Combined flux in latest and established models = 0.37025 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.37025 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.926 mas, bmaj=6.353 mas, bpa=65.72 degrees
! Estimated noise=0.394926 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.028838 Jy
! Component: 100  -  total flux cleaned = 0.0457714 Jy
! Component: 150  -  total flux cleaned = 0.0563741 Jy
! Component: 200  -  total flux cleaned = 0.0632754 Jy
! Total flux subtracted in 200 components = 0.0632754 Jy
! Clean residual min=-0.003808 max=0.007323 Jy/beam
! Clean residual mean=-0.000023 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.433525 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 83 components and 0.433525 Jy
! Inverting map 
! Added new window around map position (-0.5, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00638529 Jy
! Component: 100  -  total flux cleaned = 0.00753278 Jy
! Component: 150  -  total flux cleaned = 0.00821108 Jy
! Component: 200  -  total flux cleaned = 0.00832833 Jy
! Total flux subtracted in 200 components = 0.00832833 Jy
! Clean residual min=-0.003031 max=0.002700 Jy/beam
! Clean residual mean=-0.000003 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.441853 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 0.441853 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.395 mas, bmaj=9.202 mas, bpa=-85.45 degrees
! Estimated noise=0.462249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142168 Jy
! Component: 100  -  total flux cleaned = 0.00175462 Jy
! Component: 150  -  total flux cleaned = 0.00192561 Jy
! Component: 200  -  total flux cleaned = 0.00178148 Jy
! Total flux subtracted in 200 components = 0.00178148 Jy
! Clean residual min=-0.001965 max=0.002173 Jy/beam
! Clean residual mean=0.000002 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.443635 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.51094e-05 Jy
! Component: 100  -  total flux cleaned = -0.000128609 Jy
! Component: 150  -  total flux cleaned = -8.82721e-05 Jy
! Component: 200  -  total flux cleaned = -5.19845e-05 Jy
! Total flux subtracted in 200 components = -5.19845e-05 Jy
! Clean residual min=-0.001896 max=0.002084 Jy/beam
! Clean residual mean=0.000004 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.443583 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 150 components and 0.443583 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.926 mas, bmaj=6.353 mas, bpa=65.72 degrees
! Estimated noise=0.394926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00143341 Jy
! Component: 100  -  total flux cleaned = -0.00177225 Jy
! Component: 150  -  total flux cleaned = -0.00177321 Jy
! Component: 200  -  total flux cleaned = -0.00184251 Jy
! Total flux subtracted in 200 components = -0.00184251 Jy
! Clean residual min=-0.002507 max=0.002079 Jy/beam
! Clean residual mean=0.000000 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.44174 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 171 components and 0.44174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061587Jy  sigma=1.276127
! Fit after  self-cal, rms=0.061537Jy  sigma=1.274978
wmodel /J1326+5712_S_map.mod
! wmodel: Unable to open new model file: /J1326+5712_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1326+5712_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.926 x 6.353 at 65.72 degrees (North through East)
! Clean map  min=-0.002361  max=0.23082 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1326+5712_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.230817 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000576662 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.749506 0.749506 1.49901 2.99802 5.99605 11.9921 23.9842 47.9684 95.9368
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.23 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  400.263 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1326+5712_S_dfm.log closed on Thu May 19 18:40:39 2016