! Started logfile: /scr/pima/bg219e_uvs/J1325-0804_X_dfm.log on Thu May 19 18:40:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1325-0804_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1325-0804_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.776496 visibilities/baseline/integration-bin.
! Found source: J1325-0804
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21804 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1325-0804_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 66 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014035Jy  sigma=23.185074
! Fit after  self-cal, rms=0.854652Jy  sigma=19.441737
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7612 mas, bmaj=1.724 mas, bpa=4.055 degrees
! Estimated noise=0.381863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101149 Jy
! Component: 100  -  total flux cleaned = 0.133957 Jy
! Total flux subtracted in 100 components = 0.133957 Jy
! Clean residual min=-0.006785 max=0.015144 Jy/beam
! Clean residual mean=0.000004 rms=0.001696 Jy/beam
! Combined flux in latest and established models = 0.133957 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.133957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073896Jy  sigma=1.638423
! Fit after  self-cal, rms=0.073755Jy  sigma=1.635066
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017562 Jy
! Component: 100  -  total flux cleaned = 0.0272134 Jy
! Total flux subtracted in 100 components = 0.0272134 Jy
! Clean residual min=-0.004444 max=0.009713 Jy/beam
! Clean residual mean=0.000002 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.16117 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.16117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066652Jy  sigma=1.458182
! Fit after  self-cal, rms=0.066618Jy  sigma=1.457412
! Inverting map 
! Added new window around map position (-1.8, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00889314 Jy
! Component: 100  -  total flux cleaned = 0.0144142 Jy
! Total flux subtracted in 100 components = 0.0144142 Jy
! Clean residual min=-0.003340 max=0.003557 Jy/beam
! Clean residual mean=0.000001 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.175585 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.175585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064593Jy  sigma=1.406506
! Fit after  self-cal, rms=0.064542Jy  sigma=1.405069
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=2.15 mas, bpa=4.628 degrees
! Estimated noise=0.225184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00873123 Jy
! Component: 100  -  total flux cleaned = 0.0140575 Jy
! Component: 150  -  total flux cleaned = 0.017791 Jy
! Component: 200  -  total flux cleaned = 0.0204662 Jy
! Total flux subtracted in 200 components = 0.0204662 Jy
! Clean residual min=-0.002153 max=0.002629 Jy/beam
! Clean residual mean=-0.000000 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.196051 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 57 components and 0.196051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063237Jy  sigma=1.373084
! Fit after  self-cal, rms=0.063186Jy  sigma=1.371662
! Inverting map 
! Added new window around map position (-3, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301986 Jy
! Component: 100  -  total flux cleaned = 0.00469771 Jy
! Component: 150  -  total flux cleaned = 0.00590276 Jy
! Component: 200  -  total flux cleaned = 0.00685379 Jy
! Total flux subtracted in 200 components = 0.00685379 Jy
! Clean residual min=-0.001732 max=0.001709 Jy/beam
! Clean residual mean=-0.000001 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.202904 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 80 components and 0.202904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063025Jy  sigma=1.368102
! Fit after  self-cal, rms=0.063004Jy  sigma=1.367695
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 2.15 at 4.628 degrees (North through East)
! Clean map  min=-0.0016195  max=0.14388 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.03     KP        0.98     
!   LA        1.03     MK        1.02     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.99     MK        0.93     NL        1.02     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.05     KP        0.99     
!   LA        0.99     MK        0.97     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.99     MK        0.97     NL        1.04     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        0.96     
!   LA        1.00     MK        1.00     NL        1.01     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.03     KP        0.96     
!   LA        1.01     MK        0.98     NL        1.02     OV        1.03     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.00     KP        0.96     
!   LA        0.98     MK        1.08     NL        1.02     OV        0.98     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.97     KP        0.96     
!   LA        0.99     MK        1.02     NL        1.02     OV        1.02     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.03     KP        0.97     
!   LA        0.97     MK        0.99     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.98     
!   LA        1.01     MK        1.01     NL        1.00     OV        0.97     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.02     MK        1.10     NL        0.99     OV        1.01     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.98     
!   LA        1.00     MK        1.06     NL        1.02     OV        1.00     
!   PT        1.04     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.063004Jy  sigma=1.367695
! Fit after  self-cal, rms=0.062879Jy  sigma=1.364019
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=2.153 mas, bpa=4.872 degrees
! Estimated noise=0.224603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000510171 Jy
! Component: 100  -  total flux cleaned = 0.000534565 Jy
! Component: 150  -  total flux cleaned = 0.000512497 Jy
! Component: 200  -  total flux cleaned = 0.00049108 Jy
! Total flux subtracted in 200 components = 0.00049108 Jy
! Clean residual min=-0.001502 max=0.001439 Jy/beam
! Clean residual mean=-0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.203396 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 103 components and 0.203396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062859Jy  sigma=1.363545
! Fit after  self-cal, rms=0.062859Jy  sigma=1.363484
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062859Jy  sigma=1.363484
! Fit after  self-cal, rms=0.062785Jy  sigma=1.360439
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=2.152 mas, bpa=4.815 degrees
! Estimated noise=0.224451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193772 Jy
! Component: 100  -  total flux cleaned = 0.000176982 Jy
! Component: 150  -  total flux cleaned = 0.000147172 Jy
! Component: 200  -  total flux cleaned = 0.000119812 Jy
! Total flux subtracted in 200 components = 0.000119812 Jy
! Clean residual min=-0.001417 max=0.001286 Jy/beam
! Clean residual mean=-0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.203515 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 114 components and 0.203515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062777Jy  sigma=1.360228
! Fit after  self-cal, rms=0.062782Jy  sigma=1.360178
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.46225e-05 Jy
! Component: 100  -  total flux cleaned = 4.98728e-05 Jy
! Component: 150  -  total flux cleaned = 1.48526e-05 Jy
! Component: 200  -  total flux cleaned = -6.93086e-06 Jy
! Total flux subtracted in 200 components = -6.93086e-06 Jy
! Clean residual min=-0.001397 max=0.001273 Jy/beam
! Clean residual mean=-0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.203508 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 120 components and 0.203508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062778Jy  sigma=1.360074
! Fit after  self-cal, rms=0.062777Jy  sigma=1.360070
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062777Jy  sigma=1.360070
! Fit after  self-cal, rms=0.062765Jy  sigma=1.360054
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=2.151 mas, bpa=4.831 degrees
! Estimated noise=0.22445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.61535e-05 Jy
! Component: 100  -  total flux cleaned = 5.48935e-05 Jy
! Component: 150  -  total flux cleaned = 2.40308e-05 Jy
! Component: 200  -  total flux cleaned = 4.78219e-06 Jy
! Total flux subtracted in 200 components = 4.78219e-06 Jy
! Clean residual min=-0.001395 max=0.001263 Jy/beam
! Clean residual mean=-0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.203513 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 124 components and 0.203513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062762Jy  sigma=1.359968
! Fit after  self-cal, rms=0.062761Jy  sigma=1.359962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.53478e-06 Jy
! Component: 100  -  total flux cleaned = -3.76136e-05 Jy
! Component: 150  -  total flux cleaned = -6.41837e-05 Jy
! Component: 200  -  total flux cleaned = -8.99932e-05 Jy
! Total flux subtracted in 200 components = -8.99932e-05 Jy
! Clean residual min=-0.001384 max=0.001261 Jy/beam
! Clean residual mean=-0.000001 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.203423 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 127 components and 0.203423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062759Jy  sigma=1.359904
! Fit after  self-cal, rms=0.062759Jy  sigma=1.359899
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062759Jy  sigma=1.359899
! Fit after  self-cal, rms=0.062740Jy  sigma=1.359893
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=3.669 mas, bpa=2.199 degrees
! Estimated noise=0.270803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108325 Jy
! Component: 100  -  total flux cleaned = 9.53482e-05 Jy
! Component: 150  -  total flux cleaned = 7.28986e-05 Jy
! Component: 200  -  total flux cleaned = 6.28318e-05 Jy
! Total flux subtracted in 200 components = 6.28318e-05 Jy
! Clean residual min=-0.001380 max=0.001579 Jy/beam
! Clean residual mean=-0.000001 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.203486 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 134 components and 0.203486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062739Jy  sigma=1.359862
! Fit after  self-cal, rms=0.062738Jy  sigma=1.359853
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.25362e-08 Jy
! Component: 100  -  total flux cleaned = -1.85436e-05 Jy
! Component: 150  -  total flux cleaned = -5.1739e-05 Jy
! Component: 200  -  total flux cleaned = -5.93206e-05 Jy
! Total flux subtracted in 200 components = -5.93206e-05 Jy
! Clean residual min=-0.001348 max=0.001565 Jy/beam
! Clean residual mean=-0.000001 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.203427 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 138 components and 0.203427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062738Jy  sigma=1.359838
! Fit after  self-cal, rms=0.062738Jy  sigma=1.359834
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=2.151 mas, bpa=4.832 degrees
! Estimated noise=0.224427 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.012 x 2.151 at 4.832 degrees (North through East)
! Clean map  min=-0.001279  max=0.14346 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7602 mas, bmaj=1.725 mas, bpa=4.353 degrees
! Estimated noise=0.381144 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101029 Jy
! Component: 100  -  total flux cleaned = 0.134732 Jy
! Component: 150  -  total flux cleaned = 0.152377 Jy
! Component: 200  -  total flux cleaned = 0.163799 Jy
! Total flux subtracted in 200 components = 0.163799 Jy
! Clean residual min=-0.003826 max=0.006208 Jy/beam
! Clean residual mean=0.000002 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.163799 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.163799 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=2.151 mas, bpa=4.832 degrees
! Estimated noise=0.224427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136034 Jy
! Component: 100  -  total flux cleaned = 0.021325 Jy
! Component: 150  -  total flux cleaned = 0.0264468 Jy
! Component: 200  -  total flux cleaned = 0.0300366 Jy
! Total flux subtracted in 200 components = 0.0300366 Jy
! Clean residual min=-0.002000 max=0.002008 Jy/beam
! Clean residual mean=0.000000 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.193836 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 48 components and 0.193836 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259162 Jy
! Component: 100  -  total flux cleaned = 0.00449129 Jy
! Component: 150  -  total flux cleaned = 0.00589275 Jy
! Component: 200  -  total flux cleaned = 0.00694498 Jy
! Total flux subtracted in 200 components = 0.00694498 Jy
! Clean residual min=-0.001609 max=0.001318 Jy/beam
! Clean residual mean=-0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.200781 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 78 components and 0.200781 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=3.669 mas, bpa=2.199 degrees
! Estimated noise=0.270803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110959 Jy
! Component: 100  -  total flux cleaned = 0.00146389 Jy
! Component: 150  -  total flux cleaned = 0.00167333 Jy
! Component: 200  -  total flux cleaned = 0.00186926 Jy
! Total flux subtracted in 200 components = 0.00186926 Jy
! Clean residual min=-0.001506 max=0.001621 Jy/beam
! Clean residual mean=-0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.20265 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128616 Jy
! Component: 100  -  total flux cleaned = 0.000254583 Jy
! Component: 150  -  total flux cleaned = 0.000349746 Jy
! Component: 200  -  total flux cleaned = 0.000420946 Jy
! Total flux subtracted in 200 components = 0.000420946 Jy
! Clean residual min=-0.001426 max=0.001577 Jy/beam
! Clean residual mean=-0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.203071 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 112 components and 0.203071 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=2.151 mas, bpa=4.832 degrees
! Estimated noise=0.224427 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.36901e-05 Jy
! Component: 100  -  total flux cleaned = -9.02974e-05 Jy
! Component: 150  -  total flux cleaned = -0.000122781 Jy
! Component: 200  -  total flux cleaned = -0.000138139 Jy
! Total flux subtracted in 200 components = -0.000138139 Jy
! Clean residual min=-0.001415 max=0.001252 Jy/beam
! Clean residual mean=-0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.202933 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 128 components and 0.202933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062754Jy  sigma=1.360066
! Fit after  self-cal, rms=0.062752Jy  sigma=1.359978
wmodel /J1325-0804_X_map.mod
! wmodel: Unable to open new model file: /J1325-0804_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1325-0804_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.012 x 2.151 at 4.832 degrees (North through East)
! Clean map  min=-0.0013327  max=0.14383 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1325-0804_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.143832 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00031842 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.664151 0.664151 1.3283 2.65661 5.31321 10.6264 21.2528 42.5057 85.0114
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.143 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  451.704 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1325-0804_X_dfm.log closed on Thu May 19 18:40:34 2016