! Started logfile: /scr/pima/bg219e_uvs/J1309+5557_X_dfm.log on Thu May 19 18:40:00 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1309+5557_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1309+5557_X_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.724206 visibilities/baseline/integration-bin.
! Found source: J1309+5557
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13140 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1309+5557_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031815Jy  sigma=23.916035
! Fit after  self-cal, rms=0.751957Jy  sigma=17.371547
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.294 mas, bmaj=1.715 mas, bpa=-48.44 degrees
! Estimated noise=0.58982 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.189903 Jy
! Component: 100  -  total flux cleaned = 0.235615 Jy
! Total flux subtracted in 100 components = 0.235615 Jy
! Clean residual min=-0.008247 max=0.019772 Jy/beam
! Clean residual mean=0.000104 rms=0.002658 Jy/beam
! Combined flux in latest and established models = 0.235615 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.235615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073380Jy  sigma=1.649458
! Fit after  self-cal, rms=0.073289Jy  sigma=1.647649
! Inverting map 
! Added new window around map position (-0.4, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224025 Jy
! Component: 100  -  total flux cleaned = 0.0355052 Jy
! Total flux subtracted in 100 components = 0.0355052 Jy
! Clean residual min=-0.005573 max=0.006799 Jy/beam
! Clean residual mean=0.000055 rms=0.001386 Jy/beam
! Combined flux in latest and established models = 0.27112 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 21 components and 0.27112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064752Jy  sigma=1.431175
! Fit after  self-cal, rms=0.064557Jy  sigma=1.426260
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00886574 Jy
! Component: 100  -  total flux cleaned = 0.0145358 Jy
! Total flux subtracted in 100 components = 0.0145358 Jy
! Clean residual min=-0.003865 max=0.004197 Jy/beam
! Clean residual mean=0.000035 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.285656 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 33 components and 0.285656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063053Jy  sigma=1.386978
! Fit after  self-cal, rms=0.063016Jy  sigma=1.385818
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.53 mas, bmaj=1.954 mas, bpa=-48.19 degrees
! Estimated noise=0.279553 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00538893 Jy
! Component: 100  -  total flux cleaned = 0.00865452 Jy
! Component: 150  -  total flux cleaned = 0.0109019 Jy
! Component: 200  -  total flux cleaned = 0.0125242 Jy
! Total flux subtracted in 200 components = 0.0125242 Jy
! Clean residual min=-0.002555 max=0.002282 Jy/beam
! Clean residual mean=0.000021 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.29818 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 63 components and 0.29818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062532Jy  sigma=1.373033
! Fit after  self-cal, rms=0.062524Jy  sigma=1.372685
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.53 x 1.954 at -48.19 degrees (North through East)
! Clean map  min=-0.0024445  max=0.24842 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.98     NL        0.99     OV        0.98     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        0.97     KP        0.98     
!   LA        0.98     NL        1.00     OV        0.99     PT        1.01     
!   SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00     KP        0.97     
!   LA        0.97     NL        0.99     OV        0.99     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.98     NL        1.01     OV        1.00     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.98     
!   LA        0.97     NL        1.00     OV        1.01     PT        0.99     
!   SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.97     
!   LA        0.97     NL        1.03     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.99     NL        1.01     OV        1.00     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.99     KP        1.01     
!   LA        0.97     NL        1.00     OV        1.00     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        1.01     
!   LA        0.97     NL        1.00     OV        1.01     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        0.98     
!   LA        0.98     NL        1.02     OV        0.99     PT        1.02     
!   SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.03     KP        1.00     
!   LA        0.98     NL        1.01     OV        1.03     PT        1.02     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.062524Jy  sigma=1.372685
! Fit after  self-cal, rms=0.062426Jy  sigma=1.365684
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.537 mas, bmaj=1.961 mas, bpa=-48.47 degrees
! Estimated noise=0.279219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279174 Jy
! Component: 100  -  total flux cleaned = 0.00010718 Jy
! Component: 150  -  total flux cleaned = 1.16014e-05 Jy
! Component: 200  -  total flux cleaned = -2.61238e-06 Jy
! Total flux subtracted in 200 components = -2.61238e-06 Jy
! Clean residual min=-0.001938 max=0.001959 Jy/beam
! Clean residual mean=0.000006 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.298178 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 76 components and 0.298178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062410Jy  sigma=1.365320
! Fit after  self-cal, rms=0.062415Jy  sigma=1.365252
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062415Jy  sigma=1.365252
! Fit after  self-cal, rms=0.062343Jy  sigma=1.361268
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.54 mas, bmaj=1.956 mas, bpa=-48.17 degrees
! Estimated noise=0.279232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000746798 Jy
! Component: 100  -  total flux cleaned = -0.000647335 Jy
! Component: 150  -  total flux cleaned = -0.00058009 Jy
! Component: 200  -  total flux cleaned = -0.00050663 Jy
! Total flux subtracted in 200 components = -0.00050663 Jy
! Clean residual min=-0.001877 max=0.001659 Jy/beam
! Clean residual mean=0.000002 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.297671 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 86 components and 0.297671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062325Jy  sigma=1.360982
! Fit after  self-cal, rms=0.062328Jy  sigma=1.360963
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.54843e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133123 Jy
! Component: 150  -  total flux cleaned = 0.000164413 Jy
! Component: 200  -  total flux cleaned = 0.000183387 Jy
! Total flux subtracted in 200 components = 0.000183387 Jy
! Clean residual min=-0.001872 max=0.001661 Jy/beam
! Clean residual mean=0.000002 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.297854 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 0.297854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062323Jy  sigma=1.360902
! Fit after  self-cal, rms=0.062323Jy  sigma=1.360900
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062323Jy  sigma=1.360900
! Fit after  self-cal, rms=0.062376Jy  sigma=1.360777
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.543 mas, bmaj=1.955 mas, bpa=-48.06 degrees
! Estimated noise=0.279231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000474474 Jy
! Component: 100  -  total flux cleaned = -0.000436749 Jy
! Component: 150  -  total flux cleaned = -0.000380745 Jy
! Component: 200  -  total flux cleaned = -0.000341746 Jy
! Total flux subtracted in 200 components = -0.000341746 Jy
! Clean residual min=-0.001831 max=0.001677 Jy/beam
! Clean residual mean=0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.297513 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 92 components and 0.297513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062368Jy  sigma=1.360660
! Fit after  self-cal, rms=0.062369Jy  sigma=1.360656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.73533e-05 Jy
! Component: 100  -  total flux cleaned = 6.12799e-05 Jy
! Component: 150  -  total flux cleaned = 7.58701e-05 Jy
! Component: 200  -  total flux cleaned = 8.88733e-05 Jy
! Total flux subtracted in 200 components = 8.88733e-05 Jy
! Clean residual min=-0.001828 max=0.001671 Jy/beam
! Clean residual mean=0.000001 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.297601 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 93 components and 0.297601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062367Jy  sigma=1.360629
! Fit after  self-cal, rms=0.062367Jy  sigma=1.360627
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062367Jy  sigma=1.360627
! Fit after  self-cal, rms=0.062402Jy  sigma=1.360578
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.348 mas, bmaj=2.544 mas, bpa=-68.3 degrees
! Estimated noise=0.310901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.37627e-05 Jy
! Component: 100  -  total flux cleaned = -4.9738e-05 Jy
! Component: 150  -  total flux cleaned = -2.23265e-05 Jy
! Component: 200  -  total flux cleaned = -4.08374e-06 Jy
! Total flux subtracted in 200 components = -4.08374e-06 Jy
! Clean residual min=-0.001642 max=0.001759 Jy/beam
! Clean residual mean=0.000002 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.297597 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 95 components and 0.297597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062399Jy  sigma=1.360552
! Fit after  self-cal, rms=0.062400Jy  sigma=1.360553
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-31.8, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114815 Jy
! Component: 100  -  total flux cleaned = 0.00115119 Jy
! Component: 150  -  total flux cleaned = 0.00103203 Jy
! Component: 200  -  total flux cleaned = 0.000896693 Jy
! Total flux subtracted in 200 components = 0.000896693 Jy
! Clean residual min=-0.001710 max=0.001370 Jy/beam
! Clean residual mean=0.000006 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.298494 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 121 components and 0.298494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062362Jy  sigma=1.359584
! Fit after  self-cal, rms=0.062357Jy  sigma=1.359519
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.544 mas, bmaj=1.953 mas, bpa=-47.99 degrees
! Estimated noise=0.279236 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.544 x 1.953 at -47.99 degrees (North through East)
! Clean map  min=-0.0017394  max=0.24775 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.304 mas, bmaj=1.71 mas, bpa=-48.3 degrees
! Estimated noise=0.591915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.190387 Jy
! Component: 100  -  total flux cleaned = 0.236939 Jy
! Component: 150  -  total flux cleaned = 0.258715 Jy
! Component: 200  -  total flux cleaned = 0.271459 Jy
! Total flux subtracted in 200 components = 0.271459 Jy
! Clean residual min=-0.003902 max=0.006573 Jy/beam
! Clean residual mean=0.000042 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.271459 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.271459 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.544 mas, bmaj=1.953 mas, bpa=-47.99 degrees
! Estimated noise=0.279236 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00984584 Jy
! Component: 100  -  total flux cleaned = 0.0154089 Jy
! Component: 150  -  total flux cleaned = 0.0188462 Jy
! Component: 200  -  total flux cleaned = 0.0211623 Jy
! Total flux subtracted in 200 components = 0.0211623 Jy
! Clean residual min=-0.002176 max=0.001673 Jy/beam
! Clean residual mean=0.000012 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.292622 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 51 components and 0.292622 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.348 mas, bmaj=2.544 mas, bpa=-68.3 degrees
! Estimated noise=0.310901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218554 Jy
! Component: 100  -  total flux cleaned = 0.00364241 Jy
! Component: 150  -  total flux cleaned = 0.00434333 Jy
! Component: 200  -  total flux cleaned = 0.0047626 Jy
! Total flux subtracted in 200 components = 0.0047626 Jy
! Clean residual min=-0.001839 max=0.001421 Jy/beam
! Clean residual mean=0.000012 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.297384 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172628 Jy
! Component: 100  -  total flux cleaned = 0.000270856 Jy
! Component: 150  -  total flux cleaned = 0.000314138 Jy
! Component: 200  -  total flux cleaned = 0.000391477 Jy
! Total flux subtracted in 200 components = 0.000391477 Jy
! Clean residual min=-0.001802 max=0.001326 Jy/beam
! Clean residual mean=0.000011 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.297776 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 102 components and 0.297776 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.544 mas, bmaj=1.953 mas, bpa=-47.99 degrees
! Estimated noise=0.279236 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.63499e-06 Jy
! Component: 100  -  total flux cleaned = 6.01917e-05 Jy
! Component: 150  -  total flux cleaned = 0.000218034 Jy
! Component: 200  -  total flux cleaned = 0.000260237 Jy
! Total flux subtracted in 200 components = 0.000260237 Jy
! Clean residual min=-0.001827 max=0.001484 Jy/beam
! Clean residual mean=0.000006 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.298036 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 125 components and 0.298036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062362Jy  sigma=1.359427
! Fit after  self-cal, rms=0.062358Jy  sigma=1.359398
wmodel /J1309+5557_X_map.mod
! wmodel: Unable to open new model file: /J1309+5557_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1309+5557_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.544 x 1.953 at -47.99 degrees (North through East)
! Clean map  min=-0.0017382  max=0.2481 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1309+5557_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.248101 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000338457 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.409258 0.409258 0.818516 1.63703 3.27407 6.54813 13.0963 26.1925 52.385
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.248 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  733.033 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1309+5557_X_dfm.log closed on Thu May 19 18:40:03 2016