! Started logfile: /scr/pima/bg219e_uvs/J1306+5529_X_dfm.log on Thu May 19 18:39:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1306+5529_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1306+5529_X_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.914875 visibilities/baseline/integration-bin.
! Found source: J1306+5529
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24504 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1306+5529_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027450Jy  sigma=23.607034
! Fit after  self-cal, rms=0.771174Jy  sigma=17.641570
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=1.431 mas, bpa=57.67 degrees
! Estimated noise=0.508824 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.173049 Jy
! Component: 100  -  total flux cleaned = 0.217714 Jy
! Total flux subtracted in 100 components = 0.217714 Jy
! Clean residual min=-0.007094 max=0.018745 Jy/beam
! Clean residual mean=0.000064 rms=0.002129 Jy/beam
! Combined flux in latest and established models = 0.217714 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.217714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070957Jy  sigma=1.567755
! Fit after  self-cal, rms=0.070724Jy  sigma=1.563681
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206308 Jy
! Component: 100  -  total flux cleaned = 0.0311076 Jy
! Total flux subtracted in 100 components = 0.0311076 Jy
! Clean residual min=-0.004408 max=0.006977 Jy/beam
! Clean residual mean=0.000033 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.248822 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.248822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063204Jy  sigma=1.379764
! Fit after  self-cal, rms=0.063075Jy  sigma=1.377598
! Inverting map 
! Added new window around map position (-1.4, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00789427 Jy
! Component: 100  -  total flux cleaned = 0.0123689 Jy
! Total flux subtracted in 100 components = 0.0123689 Jy
! Clean residual min=-0.003748 max=0.003969 Jy/beam
! Clean residual mean=0.000021 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.261191 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.261191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061793Jy  sigma=1.346902
! Fit after  self-cal, rms=0.061718Jy  sigma=1.345530
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=1.755 mas, bpa=60.51 degrees
! Estimated noise=0.212727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00525241 Jy
! Component: 100  -  total flux cleaned = 0.00804155 Jy
! Component: 150  -  total flux cleaned = 0.00984928 Jy
! Component: 200  -  total flux cleaned = 0.0110973 Jy
! Total flux subtracted in 200 components = 0.0110973 Jy
! Clean residual min=-0.001940 max=0.001899 Jy/beam
! Clean residual mean=0.000018 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.272288 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.272288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061258Jy  sigma=1.334948
! Fit after  self-cal, rms=0.061215Jy  sigma=1.334084
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.326 x 1.755 at 60.51 degrees (North through East)
! Clean map  min=-0.0016427  max=0.22713 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.01     OV        1.00     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.02     KP        1.00     
!   LA        0.99     NL        1.01     OV        1.00     PT        1.01     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.97     
!   LA        0.98     NL        0.98     OV        1.02     PT        1.01     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.02     OV        1.02     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        0.98     
!   LA        0.99     NL        0.99     OV        1.01     PT        1.02     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.00     KP        0.97     
!   LA        0.99     NL        1.01     OV        1.01     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.95     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.98     NL        1.00     OV        1.00     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.98     NL        1.02     OV        0.98     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.03     KP        0.99     
!   LA        0.99     NL        1.02     OV        0.99     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.03     KP        0.99     
!   LA        0.97     NL        1.02     OV        1.00     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.96     KP        0.97     
!   LA        0.96     NL        1.02     OV        1.03     PT        1.02     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.061215Jy  sigma=1.334084
! Fit after  self-cal, rms=0.060902Jy  sigma=1.328287
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.327 mas, bmaj=1.757 mas, bpa=60.49 degrees
! Estimated noise=0.212355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000319469 Jy
! Component: 100  -  total flux cleaned = -0.000377394 Jy
! Component: 150  -  total flux cleaned = -0.000376711 Jy
! Component: 200  -  total flux cleaned = -0.000359162 Jy
! Total flux subtracted in 200 components = -0.000359162 Jy
! Clean residual min=-0.001404 max=0.001578 Jy/beam
! Clean residual mean=0.000006 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.271929 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 51 components and 0.271929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060877Jy  sigma=1.327728
! Fit after  self-cal, rms=0.060871Jy  sigma=1.327548
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060871Jy  sigma=1.327548
! Fit after  self-cal, rms=0.060772Jy  sigma=1.323815
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=1.759 mas, bpa=60.62 degrees
! Estimated noise=0.212309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.94971e-05 Jy
! Component: 100  -  total flux cleaned = -1.43171e-05 Jy
! Component: 150  -  total flux cleaned = -4.33394e-05 Jy
! Component: 200  -  total flux cleaned = -6.88456e-05 Jy
! Total flux subtracted in 200 components = -6.88456e-05 Jy
! Clean residual min=-0.001244 max=0.001281 Jy/beam
! Clean residual mean=0.000003 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.27186 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.27186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060759Jy  sigma=1.323525
! Fit after  self-cal, rms=0.060758Jy  sigma=1.323440
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.8, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000792722 Jy
! Component: 100  -  total flux cleaned = 0.000908252 Jy
! Component: 150  -  total flux cleaned = 0.000962536 Jy
! Component: 200  -  total flux cleaned = 0.000918648 Jy
! Total flux subtracted in 200 components = 0.000918648 Jy
! Clean residual min=-0.001131 max=0.001162 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.272779 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.272779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060736Jy  sigma=1.322932
! Fit after  self-cal, rms=0.060735Jy  sigma=1.322904
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060735Jy  sigma=1.322904
! Fit after  self-cal, rms=0.060716Jy  sigma=1.322860
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=1.76 mas, bpa=60.62 degrees
! Estimated noise=0.212199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140136 Jy
! Component: 100  -  total flux cleaned = 0.000158269 Jy
! Component: 150  -  total flux cleaned = 0.000109757 Jy
! Component: 200  -  total flux cleaned = 7.55563e-05 Jy
! Total flux subtracted in 200 components = 7.55563e-05 Jy
! Clean residual min=-0.001100 max=0.001105 Jy/beam
! Clean residual mean=0.000001 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.272854 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 76 components and 0.272854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060710Jy  sigma=1.322728
! Fit after  self-cal, rms=0.060710Jy  sigma=1.322718
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.71779e-06 Jy
! Component: 100  -  total flux cleaned = -2.88092e-05 Jy
! Component: 150  -  total flux cleaned = -4.83311e-05 Jy
! Component: 200  -  total flux cleaned = -6.68854e-05 Jy
! Total flux subtracted in 200 components = -6.68854e-05 Jy
! Clean residual min=-0.001086 max=0.001094 Jy/beam
! Clean residual mean=0.000001 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.272788 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 83 components and 0.272788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060707Jy  sigma=1.322647
! Fit after  self-cal, rms=0.060707Jy  sigma=1.322645
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060707Jy  sigma=1.322645
! Fit after  self-cal, rms=0.060689Jy  sigma=1.322635
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.431 mas, bmaj=2.623 mas, bpa=-73.5 degrees
! Estimated noise=0.244277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011281 Jy
! Component: 100  -  total flux cleaned = 6.76204e-05 Jy
! Component: 150  -  total flux cleaned = 5.92985e-05 Jy
! Component: 200  -  total flux cleaned = 5.22935e-05 Jy
! Total flux subtracted in 200 components = 5.22935e-05 Jy
! Clean residual min=-0.001039 max=0.001015 Jy/beam
! Clean residual mean=0.000001 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.27284 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 92 components and 0.27284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060689Jy  sigma=1.322639
! Fit after  self-cal, rms=0.060689Jy  sigma=1.322637
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.0231e-06 Jy
! Component: 100  -  total flux cleaned = -2.48507e-06 Jy
! Component: 150  -  total flux cleaned = -1.44899e-05 Jy
! Component: 200  -  total flux cleaned = -1.99066e-05 Jy
! Total flux subtracted in 200 components = -1.99066e-05 Jy
! Clean residual min=-0.001042 max=0.000996 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.27282 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 95 components and 0.27282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060689Jy  sigma=1.322635
! Fit after  self-cal, rms=0.060689Jy  sigma=1.322637
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=1.76 mas, bpa=60.62 degrees
! Estimated noise=0.212114 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.326 x 1.76 at 60.62 degrees (North through East)
! Clean map  min=-0.001023  max=0.22678 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.011 mas, bmaj=1.434 mas, bpa=57.7 degrees
! Estimated noise=0.508154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172415 Jy
! Component: 100  -  total flux cleaned = 0.219749 Jy
! Component: 150  -  total flux cleaned = 0.240561 Jy
! Component: 200  -  total flux cleaned = 0.250387 Jy
! Total flux subtracted in 200 components = 0.250387 Jy
! Clean residual min=-0.003584 max=0.004760 Jy/beam
! Clean residual mean=0.000024 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.250387 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.250387 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=1.76 mas, bpa=60.62 degrees
! Estimated noise=0.212114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00816472 Jy
! Component: 100  -  total flux cleaned = 0.0125512 Jy
! Component: 150  -  total flux cleaned = 0.0152954 Jy
! Component: 200  -  total flux cleaned = 0.0171013 Jy
! Total flux subtracted in 200 components = 0.0171013 Jy
! Clean residual min=-0.001438 max=0.001398 Jy/beam
! Clean residual mean=0.000011 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.267489 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 45 components and 0.267489 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.431 mas, bmaj=2.623 mas, bpa=-73.5 degrees
! Estimated noise=0.244277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182632 Jy
! Component: 100  -  total flux cleaned = 0.00297692 Jy
! Component: 150  -  total flux cleaned = 0.00377968 Jy
! Component: 200  -  total flux cleaned = 0.00428077 Jy
! Total flux subtracted in 200 components = 0.00428077 Jy
! Clean residual min=-0.001101 max=0.001177 Jy/beam
! Clean residual mean=0.000006 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.271769 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000240495 Jy
! Component: 100  -  total flux cleaned = 0.00043234 Jy
! Component: 150  -  total flux cleaned = 0.000540928 Jy
! Component: 200  -  total flux cleaned = 0.000561465 Jy
! Total flux subtracted in 200 components = 0.000561465 Jy
! Clean residual min=-0.001056 max=0.001073 Jy/beam
! Clean residual mean=0.000004 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.272331 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 80 components and 0.272331 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=1.76 mas, bpa=60.62 degrees
! Estimated noise=0.212114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000190144 Jy
! Component: 100  -  total flux cleaned = 0.00014247 Jy
! Component: 150  -  total flux cleaned = 5.68549e-05 Jy
! Component: 200  -  total flux cleaned = -8.35457e-06 Jy
! Total flux subtracted in 200 components = -8.35457e-06 Jy
! Clean residual min=-0.001198 max=0.001073 Jy/beam
! Clean residual mean=0.000002 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.272322 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 102 components and 0.272322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060697Jy  sigma=1.322827
! Fit after  self-cal, rms=0.060693Jy  sigma=1.322722
wmodel /J1306+5529_X_map.mod
! wmodel: Unable to open new model file: /J1306+5529_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1306+5529_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.326 x 1.76 at 60.62 degrees (North through East)
! Clean map  min=-0.0010908  max=0.22704 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1306+5529_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.227039 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000261549 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.3456 0.3456 0.6912 1.3824 2.7648 5.5296 11.0592 22.1184 44.2368 88.4736
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.227 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  868.055 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1306+5529_X_dfm.log closed on Thu May 19 18:39:55 2016