! Started logfile: /scr/pima/bg219e_uvs/J1238-1959_X_dfm.log on Thu May 19 18:39:22 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1238-1959_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1238-1959_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.781056 visibilities/baseline/integration-bin.
! Found source: J1238-1959
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25728 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1238-1959_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011425Jy  sigma=20.975017
! Fit after  self-cal, rms=0.889505Jy  sigma=18.362758
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6469 mas, bmaj=1.589 mas, bpa=-2.883 degrees
! Estimated noise=0.470025 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0822339 Jy
! Component: 100  -  total flux cleaned = 0.1046 Jy
! Total flux subtracted in 100 components = 0.1046 Jy
! Clean residual min=-0.004724 max=0.011336 Jy/beam
! Clean residual mean=-0.000001 rms=0.001245 Jy/beam
! Combined flux in latest and established models = 0.1046 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.1046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076618Jy  sigma=1.451201
! Fit after  self-cal, rms=0.076450Jy  sigma=1.447878
! Inverting map 
! Added new window around map position (0.6, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125037 Jy
! Component: 100  -  total flux cleaned = 0.0194185 Jy
! Total flux subtracted in 100 components = 0.0194185 Jy
! Clean residual min=-0.003163 max=0.004512 Jy/beam
! Clean residual mean=-0.000000 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.124018 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.124018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073690Jy  sigma=1.373879
! Fit after  self-cal, rms=0.073645Jy  sigma=1.372813
! Inverting map 
! Added new window around map position (1.6, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00493745 Jy
! Component: 100  -  total flux cleaned = 0.00800956 Jy
! Total flux subtracted in 100 components = 0.00800956 Jy
! Clean residual min=-0.003131 max=0.003402 Jy/beam
! Clean residual mean=0.000000 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.132028 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.132028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073180Jy  sigma=1.360600
! Fit after  self-cal, rms=0.073154Jy  sigma=1.360055
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8282 mas, bmaj=2.01 mas, bpa=-2.924 degrees
! Estimated noise=0.229908 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00441589 Jy
! Component: 100  -  total flux cleaned = 0.00684159 Jy
! Component: 150  -  total flux cleaned = 0.00835553 Jy
! Component: 200  -  total flux cleaned = 0.00907814 Jy
! Total flux subtracted in 200 components = 0.00907814 Jy
! Clean residual min=-0.002118 max=0.002754 Jy/beam
! Clean residual mean=0.000001 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.141106 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 31 components and 0.141106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072917Jy  sigma=1.353290
! Fit after  self-cal, rms=0.072909Jy  sigma=1.352853
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8282 x 2.01 at -2.924 degrees (North through East)
! Clean map  min=-0.0018069  max=0.11266 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        1.08     KP        0.98     
!   LA        0.97     MK        0.95     NL        0.98     OV        1.00     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.09     KP        1.00     
!   LA        1.01     MK        0.96     NL        0.99     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.09     KP        0.98     
!   LA        0.97     MK        1.06     NL        0.99     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.12     KP        0.98     
!   LA        0.98     MK        0.97     NL        0.99     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.09     KP        0.99     
!   LA        0.96     MK        0.99     NL        1.01     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.06     KP        0.97     
!   LA        0.97     MK        1.00     NL        1.02     OV        1.01     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.08     KP        0.98     
!   LA        0.97     MK        1.13     NL        0.98     OV        0.98     
!   PT        1.01     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.07     KP        0.98     
!   LA        0.96     MK        1.00     NL        0.98     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.10     KP        1.00     
!   LA        0.99     MK        0.96     NL        0.99     OV        0.96     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.09     KP        0.96     
!   LA        0.95     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.03     KP        0.98     
!   LA        0.95     MK        1.04     NL        1.00     OV        1.02     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.03     KP        1.01     
!   LA        0.98     MK        1.07     NL        0.95     OV        0.97     
!   PT        0.93     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.072909Jy  sigma=1.352853
! Fit after  self-cal, rms=0.073975Jy  sigma=1.347946
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8307 mas, bmaj=2.007 mas, bpa=-2.45 degrees
! Estimated noise=0.228766 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000457922 Jy
! Component: 100  -  total flux cleaned = -0.000428259 Jy
! Component: 150  -  total flux cleaned = -0.000430553 Jy
! Component: 200  -  total flux cleaned = -0.000430318 Jy
! Total flux subtracted in 200 components = -0.000430318 Jy
! Clean residual min=-0.002016 max=0.002259 Jy/beam
! Clean residual mean=0.000001 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.140675 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 41 components and 0.140675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073937Jy  sigma=1.347397
! Fit after  self-cal, rms=0.073977Jy  sigma=1.347219
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073977Jy  sigma=1.347219
! Fit after  self-cal, rms=0.074836Jy  sigma=1.343238
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.83 mas, bmaj=2.01 mas, bpa=-2.669 degrees
! Estimated noise=0.227351 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000231719 Jy
! Component: 100  -  total flux cleaned = -0.000249467 Jy
! Component: 150  -  total flux cleaned = -0.000263763 Jy
! Component: 200  -  total flux cleaned = -0.000263837 Jy
! Total flux subtracted in 200 components = -0.000263837 Jy
! Clean residual min=-0.001700 max=0.001506 Jy/beam
! Clean residual mean=0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.140412 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.140412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074823Jy  sigma=1.343117
! Fit after  self-cal, rms=0.074854Jy  sigma=1.343035
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.27944e-05 Jy
! Component: 100  -  total flux cleaned = 6.23643e-05 Jy
! Component: 150  -  total flux cleaned = 5.11447e-05 Jy
! Component: 200  -  total flux cleaned = 4.06023e-05 Jy
! Total flux subtracted in 200 components = 4.06023e-05 Jy
! Clean residual min=-0.001698 max=0.001490 Jy/beam
! Clean residual mean=0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.140452 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.140452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074849Jy  sigma=1.342983
! Fit after  self-cal, rms=0.074850Jy  sigma=1.342975
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074850Jy  sigma=1.342975
! Fit after  self-cal, rms=0.074529Jy  sigma=1.342924
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8292 mas, bmaj=2.008 mas, bpa=-2.646 degrees
! Estimated noise=0.226445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000262183 Jy
! Component: 100  -  total flux cleaned = -0.000238206 Jy
! Component: 150  -  total flux cleaned = -0.000237915 Jy
! Component: 200  -  total flux cleaned = -0.000247945 Jy
! Total flux subtracted in 200 components = -0.000247945 Jy
! Clean residual min=-0.001715 max=0.001445 Jy/beam
! Clean residual mean=0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.140204 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.140204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074521Jy  sigma=1.342873
! Fit after  self-cal, rms=0.074522Jy  sigma=1.342868
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.01592e-05 Jy
! Component: 100  -  total flux cleaned = 6.03217e-05 Jy
! Component: 150  -  total flux cleaned = 4.1392e-05 Jy
! Component: 200  -  total flux cleaned = 3.24994e-05 Jy
! Total flux subtracted in 200 components = 3.24994e-05 Jy
! Clean residual min=-0.001714 max=0.001429 Jy/beam
! Clean residual mean=0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.140237 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.140237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074518Jy  sigma=1.342832
! Fit after  self-cal, rms=0.074519Jy  sigma=1.342829
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074519Jy  sigma=1.342829
! Fit after  self-cal, rms=0.074230Jy  sigma=1.342800
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.094 mas, bmaj=4.393 mas, bpa=3.915 degrees
! Estimated noise=0.288536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314098 Jy
! Component: 100  -  total flux cleaned = 0.000313477 Jy
! Component: 150  -  total flux cleaned = 0.000300842 Jy
! Component: 200  -  total flux cleaned = 0.000309977 Jy
! Total flux subtracted in 200 components = 0.000309977 Jy
! Clean residual min=-0.001927 max=0.001599 Jy/beam
! Clean residual mean=0.000002 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.140547 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 64 components and 0.140547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074232Jy  sigma=1.342891
! Fit after  self-cal, rms=0.074232Jy  sigma=1.342869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.72647e-05 Jy
! Component: 100  -  total flux cleaned = 7.64927e-05 Jy
! Component: 150  -  total flux cleaned = 9.35797e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101263 Jy
! Total flux subtracted in 200 components = 0.000101263 Jy
! Clean residual min=-0.001912 max=0.001592 Jy/beam
! Clean residual mean=0.000002 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.140648 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 64 components and 0.140648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074235Jy  sigma=1.342953
! Fit after  self-cal, rms=0.074236Jy  sigma=1.342949
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8287 mas, bmaj=2.006 mas, bpa=-2.634 degrees
! Estimated noise=0.225726 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8287 x 2.006 at -2.634 degrees (North through East)
! Clean map  min=-0.0016149  max=0.11123 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6463 mas, bmaj=1.586 mas, bpa=-2.615 degrees
! Estimated noise=0.461956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0805536 Jy
! Component: 100  -  total flux cleaned = 0.103944 Jy
! Component: 150  -  total flux cleaned = 0.116507 Jy
! Component: 200  -  total flux cleaned = 0.123744 Jy
! Total flux subtracted in 200 components = 0.123744 Jy
! Clean residual min=-0.002586 max=0.003675 Jy/beam
! Clean residual mean=-0.000000 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.123744 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.123744 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8287 mas, bmaj=2.006 mas, bpa=-2.634 degrees
! Estimated noise=0.225726 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0067051 Jy
! Component: 100  -  total flux cleaned = 0.0102846 Jy
! Component: 150  -  total flux cleaned = 0.0125255 Jy
! Component: 200  -  total flux cleaned = 0.0139684 Jy
! Total flux subtracted in 200 components = 0.0139684 Jy
! Clean residual min=-0.001664 max=0.001639 Jy/beam
! Clean residual mean=0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.137712 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 32 components and 0.137712 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.094 mas, bmaj=4.393 mas, bpa=3.915 degrees
! Estimated noise=0.288536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160166 Jy
! Component: 100  -  total flux cleaned = 0.00236813 Jy
! Component: 150  -  total flux cleaned = 0.00265488 Jy
! Component: 200  -  total flux cleaned = 0.00271725 Jy
! Total flux subtracted in 200 components = 0.00271725 Jy
! Clean residual min=-0.001921 max=0.001651 Jy/beam
! Clean residual mean=0.000002 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.14043 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.63738e-05 Jy
! Component: 100  -  total flux cleaned = 0.00010763 Jy
! Component: 150  -  total flux cleaned = 0.000145161 Jy
! Component: 200  -  total flux cleaned = 0.000180245 Jy
! Total flux subtracted in 200 components = 0.000180245 Jy
! Clean residual min=-0.001922 max=0.001636 Jy/beam
! Clean residual mean=0.000002 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.14061 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 41 components and 0.14061 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8287 mas, bmaj=2.006 mas, bpa=-2.634 degrees
! Estimated noise=0.225726 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000362199 Jy
! Component: 100  -  total flux cleaned = -0.000326196 Jy
! Component: 150  -  total flux cleaned = -0.000342155 Jy
! Component: 200  -  total flux cleaned = -0.000357368 Jy
! Total flux subtracted in 200 components = -0.000357368 Jy
! Clean residual min=-0.001665 max=0.001526 Jy/beam
! Clean residual mean=0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.140252 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 0.140252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074241Jy  sigma=1.342998
! Fit after  self-cal, rms=0.074239Jy  sigma=1.342948
wmodel /J1238-1959_X_map.mod
! wmodel: Unable to open new model file: /J1238-1959_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1238-1959_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8287 x 2.006 at -2.634 degrees (North through East)
! Clean map  min=-0.0015767  max=0.11072 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1238-1959_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.110715 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000348456 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.944192 0.944192 1.88838 3.77677 7.55354 15.1071 30.2141 60.4283
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.11 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  317.731 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1238-1959_X_dfm.log closed on Thu May 19 18:39:25 2016