! Started logfile: /scr/pima/bg219e_uvs/J1232-1836_S_dfm.log on Thu May 19 18:39:03 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219e_uvs/J1232-1836_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1232-1836_S_uva.fits ! AN table 1: 61 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.657559 visibilities/baseline/integration-bin. ! Found source: J1232-1836 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7220 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1232-1836_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004385Jy sigma=18.416339 ! Fit after self-cal, rms=0.949091Jy sigma=17.403635 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=6.127 mas, bpa=-1.293 degrees ! Estimated noise=0.873958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401268 Jy ! Component: 100 - total flux cleaned = 0.0489227 Jy ! Total flux subtracted in 100 components = 0.0489227 Jy ! Clean residual min=-0.004788 max=0.004856 Jy/beam ! Clean residual mean=-0.000016 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.0489227 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0489227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074210Jy sigma=1.312732 ! Fit after self-cal, rms=0.072324Jy sigma=1.277738 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=7.839 mas, bpa=0.3412 degrees ! Estimated noise=0.492298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648245 Jy ! Component: 100 - total flux cleaned = 0.00892848 Jy ! Component: 150 - total flux cleaned = 0.0101409 Jy ! Component: 200 - total flux cleaned = 0.0107613 Jy ! Total flux subtracted in 200 components = 0.0107613 Jy ! Clean residual min=-0.002677 max=0.002876 Jy/beam ! Clean residual mean=-0.000009 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.059684 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.0596841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071824Jy sigma=1.267613 ! Fit after self-cal, rms=0.071818Jy sigma=1.267064 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.618 x 7.839 at 0.3412 degrees (North through East) ! Clean map min=-0.0026389 max=0.055931 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 0.96 KP 0.98 ! LA 0.96 MK 1.09 NL 1.03 OV 0.96 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.00 KP 1.09 ! LA 1.00 MK 0.97 NL 1.07 OV 0.92 ! PT 1.09 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.89 HN 0.92 KP 1.10 ! LA 1.01 MK 0.97 NL 0.96 OV 1.05 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.92 KP 1.15 ! LA 1.07 MK 0.94 NL 0.90 OV 1.00 ! PT 0.94 SC 1.03 ! ! ! Fit before self-cal, rms=0.071818Jy sigma=1.267064 ! Fit after self-cal, rms=0.072019Jy sigma=1.264089 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=7.863 mas, bpa=-0.2074 degrees ! Estimated noise=0.490925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000509539 Jy ! Component: 100 - total flux cleaned = 0.000525497 Jy ! Component: 150 - total flux cleaned = 0.000539343 Jy ! Component: 200 - total flux cleaned = 0.000538889 Jy ! Total flux subtracted in 200 components = 0.000538889 Jy ! Clean residual min=-0.002764 max=0.002698 Jy/beam ! Clean residual mean=-0.000011 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0602229 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.0602229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072010Jy sigma=1.263929 ! Fit after self-cal, rms=0.072093Jy sigma=1.262058 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072093Jy sigma=1.262058 ! Fit after self-cal, rms=0.072945Jy sigma=1.260679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=7.86 mas, bpa=0.4668 degrees ! Estimated noise=0.495541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443396 Jy ! Component: 100 - total flux cleaned = 0.000443444 Jy ! Component: 150 - total flux cleaned = 0.000403789 Jy ! Component: 200 - total flux cleaned = 0.000379834 Jy ! Total flux subtracted in 200 components = 0.000379834 Jy ! Clean residual min=-0.002661 max=0.002566 Jy/beam ! Clean residual mean=-0.000007 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0606028 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0606028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072935Jy sigma=1.260503 ! Fit after self-cal, rms=0.072983Jy sigma=1.260128 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.5881e-05 Jy ! Component: 100 - total flux cleaned = 3.47845e-05 Jy ! Component: 150 - total flux cleaned = 1.52949e-05 Jy ! Component: 200 - total flux cleaned = -2.20956e-06 Jy ! Total flux subtracted in 200 components = -2.20956e-06 Jy ! Clean residual min=-0.002697 max=0.002512 Jy/beam ! Clean residual mean=-0.000007 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0606006 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.0606006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072979Jy sigma=1.260079 ! Fit after self-cal, rms=0.072975Jy sigma=1.260038 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072975Jy sigma=1.260038 ! Fit after self-cal, rms=0.073287Jy sigma=1.259945 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=7.851 mas, bpa=0.8546 degrees ! Estimated noise=0.496861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025475 Jy ! Component: 100 - total flux cleaned = 0.000232099 Jy ! Component: 150 - total flux cleaned = 0.000200348 Jy ! Component: 200 - total flux cleaned = 0.000181578 Jy ! Total flux subtracted in 200 components = 0.000181578 Jy ! Clean residual min=-0.002678 max=0.002585 Jy/beam ! Clean residual mean=-0.000006 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0607822 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.0607822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073281Jy sigma=1.259866 ! Fit after self-cal, rms=0.073296Jy sigma=1.259840 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.43468e-07 Jy ! Component: 100 - total flux cleaned = -9.02723e-06 Jy ! Component: 150 - total flux cleaned = -2.59811e-05 Jy ! Component: 200 - total flux cleaned = -4.18748e-05 Jy ! Total flux subtracted in 200 components = -4.18748e-05 Jy ! Clean residual min=-0.002679 max=0.002571 Jy/beam ! Clean residual mean=-0.000007 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0607403 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0607403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073293Jy sigma=1.259809 ! Fit after self-cal, rms=0.073295Jy sigma=1.259796 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073295Jy sigma=1.259796 ! Fit after self-cal, rms=0.073437Jy sigma=1.259279 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.665 mas, bmaj=15.75 mas, bpa=1.272 degrees ! Estimated noise=0.611384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021073 Jy ! Component: 100 - total flux cleaned = 0.000289073 Jy ! Component: 150 - total flux cleaned = 0.000353086 Jy ! Component: 200 - total flux cleaned = 0.000393721 Jy ! Total flux subtracted in 200 components = 0.000393721 Jy ! Clean residual min=-0.002682 max=0.003016 Jy/beam ! Clean residual mean=-0.000011 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.061134 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.061134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073440Jy sigma=1.259350 ! Fit after self-cal, rms=0.073469Jy sigma=1.259207 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48387e-05 Jy ! Component: 100 - total flux cleaned = 2.93252e-05 Jy ! Component: 150 - total flux cleaned = 7.75961e-05 Jy ! Component: 200 - total flux cleaned = 0.000120789 Jy ! Total flux subtracted in 200 components = 0.000120789 Jy ! Clean residual min=-0.002683 max=0.003042 Jy/beam ! Clean residual mean=-0.000011 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0612548 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.0612548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073471Jy sigma=1.259275 ! Fit after self-cal, rms=0.073475Jy sigma=1.259252 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=7.819 mas, bpa=0.926 degrees ! Estimated noise=0.496337 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.624 x 7.819 at 0.926 degrees (North through East) ! Clean map min=-0.0024928 max=0.055596 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=6.083 mas, bpa=-0.6501 degrees ! Estimated noise=0.883089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432493 Jy ! Component: 100 - total flux cleaned = 0.0532905 Jy ! Component: 150 - total flux cleaned = 0.0570762 Jy ! Component: 200 - total flux cleaned = 0.0587026 Jy ! Total flux subtracted in 200 components = 0.0587026 Jy ! Clean residual min=-0.003734 max=0.003731 Jy/beam ! Clean residual mean=-0.000008 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.0587026 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0587026 Jy ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=7.819 mas, bpa=0.926 degrees ! Estimated noise=0.496337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149722 Jy ! Component: 100 - total flux cleaned = 0.00194078 Jy ! Component: 150 - total flux cleaned = 0.00192534 Jy ! Component: 200 - total flux cleaned = 0.00193971 Jy ! Total flux subtracted in 200 components = 0.00193971 Jy ! Clean residual min=-0.002740 max=0.002612 Jy/beam ! Clean residual mean=-0.000006 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0606423 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.0606423 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.665 mas, bmaj=15.75 mas, bpa=1.272 degrees ! Estimated noise=0.611384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418363 Jy ! Component: 100 - total flux cleaned = 0.000466566 Jy ! Component: 150 - total flux cleaned = 0.000521276 Jy ! Component: 200 - total flux cleaned = 0.000557335 Jy ! Total flux subtracted in 200 components = 0.000557335 Jy ! Clean residual min=-0.002682 max=0.003037 Jy/beam ! Clean residual mean=-0.000011 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.0611996 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.37644e-05 Jy ! Component: 100 - total flux cleaned = 8.42988e-05 Jy ! Component: 150 - total flux cleaned = 0.000112345 Jy ! Component: 200 - total flux cleaned = 0.000147623 Jy ! Total flux subtracted in 200 components = 0.000147623 Jy ! Clean residual min=-0.002669 max=0.003014 Jy/beam ! Clean residual mean=-0.000011 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.0613472 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.0613472 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=7.819 mas, bpa=0.926 degrees ! Estimated noise=0.496337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219402 Jy ! Component: 100 - total flux cleaned = -0.000312083 Jy ! Component: 150 - total flux cleaned = -0.000385026 Jy ! Component: 200 - total flux cleaned = -0.000422172 Jy ! Total flux subtracted in 200 components = -0.000422172 Jy ! Clean residual min=-0.002678 max=0.002547 Jy/beam ! Clean residual mean=-0.000005 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0609251 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.0609251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073475Jy sigma=1.259286 ! Fit after self-cal, rms=0.073471Jy sigma=1.259223 wmodel /J1232-1836_S_map.mod ! wmodel: Unable to open new model file: /J1232-1836_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219e_uvs/J1232-1836_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.624 x 7.819 at 0.926 degrees (North through East) ! Clean map min=-0.0025692 max=0.055642 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1232-1836_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0556424 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000635435 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.42599 3.42599 6.85198 13.704 27.4079 54.8159 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.055 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 87.565 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1232-1836_S_dfm.log closed on Thu May 19 18:39:06 2016