! Started logfile: /scr/pima/bg219e_uvs/J1232-1015_X_uvs.log on Thu Apr 7 09:08:19 2016 obs /scr/pima/bg219e_uvs/J1232-1015_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1232-1015_X_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.823755 visibilities/baseline/integration-bin. ! Found source: J1232-1015 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 25800 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1232-1015_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.006360Jy sigma=23.211954 ! Fit after self-cal, rms=0.886083Jy sigma=20.365341 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6867 mas, bmaj=1.699 mas, bpa=-3.489 degrees ! Estimated noise=0.46647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0866336 Jy ! Component: 100 - total flux cleaned = 0.109723 Jy ! Total flux subtracted in 100 components = 0.109723 Jy ! Clean residual min=-0.004583 max=0.010425 Jy/beam ! Clean residual mean=0.000017 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.109723 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.109723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.066662Jy sigma=1.476769 ! Fit after self-cal, rms=0.066420Jy sigma=1.471418 ! Inverting map ! Added new window around map position (0.8, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122832 Jy ! Component: 100 - total flux cleaned = 0.0190947 Jy ! Total flux subtracted in 100 components = 0.0190947 Jy ! Clean residual min=-0.003114 max=0.003408 Jy/beam ! Clean residual mean=0.000009 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.128818 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.128818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063645Jy sigma=1.400087 ! Fit after self-cal, rms=0.063580Jy sigma=1.398514 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8398 mas, bmaj=2.015 mas, bpa=-1.799 degrees ! Estimated noise=0.259566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621242 Jy ! Component: 100 - total flux cleaned = 0.00963497 Jy ! Component: 150 - total flux cleaned = 0.0117306 Jy ! Component: 200 - total flux cleaned = 0.0131177 Jy ! Total flux subtracted in 200 components = 0.0131177 Jy ! Clean residual min=-0.002205 max=0.002320 Jy/beam ! Clean residual mean=0.000003 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.141935 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.141935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062990Jy sigma=1.383336 ! Fit after self-cal, rms=0.062971Jy sigma=1.382568 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8398 x 2.015 at -1.799 degrees (North through East) ! Clean map min=-0.0019915 max=0.11489 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.05 KP 0.98 ! LA 1.01 MK 0.96 NL 0.99 OV 0.99 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.02 KP 0.97 ! LA 1.01 MK 1.01 NL 1.03 OV 0.98 ! PT 0.96 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.04 KP 0.94 ! LA 0.98 MK 1.03 NL 0.99 OV 1.00 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.07 KP 1.01 ! LA 1.01 MK 0.96 NL 1.00 OV 0.99 ! PT 1.04 SC 1.00 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 0.96 ! LA 0.98 MK 1.03 NL 1.02 OV 0.98 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.05 KP 0.97 ! LA 0.96 MK 1.05 NL 1.03 OV 0.98 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.06 KP 0.98 ! LA 0.96 MK 1.04 NL 0.98 OV 0.98 ! PT 0.99 SC 0.95 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062971Jy sigma=1.382568 ! Fit after self-cal, rms=0.063016Jy sigma=1.378519 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8436 mas, bmaj=2.02 mas, bpa=-1.585 degrees ! Estimated noise=0.258547 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.2, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217836 Jy ! Component: 100 - total flux cleaned = 0.00329638 Jy ! Component: 150 - total flux cleaned = 0.00382382 Jy ! Component: 200 - total flux cleaned = 0.00415146 Jy ! Total flux subtracted in 200 components = 0.00415146 Jy ! Clean residual min=-0.001605 max=0.001543 Jy/beam ! Clean residual mean=-0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.146087 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.146087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062931Jy sigma=1.376570 ! Fit after self-cal, rms=0.062942Jy sigma=1.376413 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.062942Jy sigma=1.376413 ! Fit after self-cal, rms=0.063034Jy sigma=1.373183 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8447 mas, bmaj=2.025 mas, bpa=-1.742 degrees ! Estimated noise=0.258656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703124 Jy ! Component: 100 - total flux cleaned = 0.000887914 Jy ! Component: 150 - total flux cleaned = 0.000948695 Jy ! Component: 200 - total flux cleaned = 0.00100423 Jy ! Total flux subtracted in 200 components = 0.00100423 Jy ! Clean residual min=-0.001484 max=0.001451 Jy/beam ! Clean residual mean=-0.000000 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.147091 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.147091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063019Jy sigma=1.372824 ! Fit after self-cal, rms=0.063027Jy sigma=1.372762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010955 Jy ! Component: 100 - total flux cleaned = 0.000158752 Jy ! Component: 150 - total flux cleaned = 0.000219107 Jy ! Component: 200 - total flux cleaned = 0.000288798 Jy ! Total flux subtracted in 200 components = 0.000288798 Jy ! Clean residual min=-0.001465 max=0.001462 Jy/beam ! Clean residual mean=-0.000000 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.14738 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 71 components and 0.14738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063020Jy sigma=1.372605 ! Fit after self-cal, rms=0.063019Jy sigma=1.372597 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063019Jy sigma=1.372597 ! Fit after self-cal, rms=0.063040Jy sigma=1.372572 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8449 mas, bmaj=2.025 mas, bpa=-1.73 degrees ! Estimated noise=0.258752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203741 Jy ! Component: 100 - total flux cleaned = 0.000272787 Jy ! Component: 150 - total flux cleaned = 0.000323353 Jy ! Component: 200 - total flux cleaned = 0.000358843 Jy ! Total flux subtracted in 200 components = 0.000358843 Jy ! Clean residual min=-0.001451 max=0.001452 Jy/beam ! Clean residual mean=0.000000 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.147739 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 0.147739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063035Jy sigma=1.372458 ! Fit after self-cal, rms=0.063034Jy sigma=1.372446 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.61207e-05 Jy ! Component: 100 - total flux cleaned = 0.000109735 Jy ! Component: 150 - total flux cleaned = 0.000142217 Jy ! Component: 200 - total flux cleaned = 0.000173535 Jy ! Total flux subtracted in 200 components = 0.000173535 Jy ! Clean residual min=-0.001452 max=0.001442 Jy/beam ! Clean residual mean=-0.000000 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.147912 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 85 components and 0.147912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063031Jy sigma=1.372372 ! Fit after self-cal, rms=0.063030Jy sigma=1.372364 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063030Jy sigma=1.372364 ! Fit after self-cal, rms=0.063055Jy sigma=1.372359 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.056 mas, bmaj=3.63 mas, bpa=2.533 degrees ! Estimated noise=0.332835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612674 Jy ! Component: 100 - total flux cleaned = 0.00081271 Jy ! Component: 150 - total flux cleaned = 0.000877405 Jy ! Component: 200 - total flux cleaned = 0.000914047 Jy ! Total flux subtracted in 200 components = 0.000914047 Jy ! Clean residual min=-0.001567 max=0.001481 Jy/beam ! Clean residual mean=-0.000000 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.148826 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 0.148826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063055Jy sigma=1.372348 ! Fit after self-cal, rms=0.063054Jy sigma=1.372318 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.07889e-05 Jy ! Component: 100 - total flux cleaned = 0.000126888 Jy ! Component: 150 - total flux cleaned = 0.000142445 Jy ! Component: 200 - total flux cleaned = 0.000135594 Jy ! Total flux subtracted in 200 components = 0.000135594 Jy ! Clean residual min=-0.001575 max=0.001451 Jy/beam ! Clean residual mean=-0.000000 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.148962 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.148962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063055Jy sigma=1.372337 ! Fit after self-cal, rms=0.063055Jy sigma=1.372329 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8451 mas, bmaj=2.024 mas, bpa=-1.716 degrees ! Estimated noise=0.258861 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8451 x 2.024 at -1.716 degrees (North through East) ! Clean map min=-0.0012941 max=0.11443 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6906 mas, bmaj=1.702 mas, bpa=-3.427 degrees ! Estimated noise=0.465107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0862217 Jy ! Component: 100 - total flux cleaned = 0.110039 Jy ! Component: 150 - total flux cleaned = 0.12233 Jy ! Component: 200 - total flux cleaned = 0.129076 Jy ! Total flux subtracted in 200 components = 0.129076 Jy ! Clean residual min=-0.002942 max=0.003282 Jy/beam ! Clean residual mean=0.000007 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.129076 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.129076 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8451 mas, bmaj=2.024 mas, bpa=-1.716 degrees ! Estimated noise=0.258861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565958 Jy ! Component: 100 - total flux cleaned = 0.0089874 Jy ! Component: 150 - total flux cleaned = 0.0113504 Jy ! Component: 200 - total flux cleaned = 0.0130818 Jy ! Total flux subtracted in 200 components = 0.0130818 Jy ! Clean residual min=-0.001650 max=0.001571 Jy/beam ! Clean residual mean=0.000002 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.142158 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.142158 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.056 mas, bmaj=3.63 mas, bpa=2.533 degrees ! Estimated noise=0.332835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198428 Jy ! Component: 100 - total flux cleaned = 0.00323074 Jy ! Component: 150 - total flux cleaned = 0.00411356 Jy ! Component: 200 - total flux cleaned = 0.0046205 Jy ! Total flux subtracted in 200 components = 0.0046205 Jy ! Clean residual min=-0.001589 max=0.001506 Jy/beam ! Clean residual mean=0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.146779 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338554 Jy ! Component: 100 - total flux cleaned = 0.000572885 Jy ! Component: 150 - total flux cleaned = 0.000700683 Jy ! Component: 200 - total flux cleaned = 0.00083137 Jy ! Total flux subtracted in 200 components = 0.00083137 Jy ! Clean residual min=-0.001567 max=0.001480 Jy/beam ! Clean residual mean=0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.14761 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 69 components and 0.14761 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8451 mas, bmaj=2.024 mas, bpa=-1.716 degrees ! Estimated noise=0.258861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.45661e-05 Jy ! Component: 100 - total flux cleaned = 6.62096e-05 Jy ! Component: 150 - total flux cleaned = 6.65939e-05 Jy ! Component: 200 - total flux cleaned = 0.000128908 Jy ! Total flux subtracted in 200 components = 0.000128908 Jy ! Clean residual min=-0.001449 max=0.001507 Jy/beam ! Clean residual mean=0.000000 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.147739 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.147739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.063073Jy sigma=1.372629 ! Fit after self-cal, rms=0.063068Jy sigma=1.372552 wmodel /scr/pima/bg219e_uvs/J1232-1015_X_map.mod ! Writing 86 model components to file: /scr/pima/bg219e_uvs/J1232-1015_X_map.mod wobs /scr/pima/bg219e_uvs/J1232-1015_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1232-1015_X_uvs.fits wwins /scr/pima/bg219e_uvs/J1232-1015_X_map.win ! wwins: Wrote 3 windows to /scr/pima/bg219e_uvs/J1232-1015_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020943 Jy ! Component: 100 - total flux cleaned = 0.000618626 Jy ! Component: 150 - total flux cleaned = 0.000914371 Jy ! Component: 200 - total flux cleaned = 0.00113228 Jy ! Component: 250 - total flux cleaned = 0.00132215 Jy ! Component: 300 - total flux cleaned = 0.00144504 Jy ! Component: 350 - total flux cleaned = 0.00154458 Jy ! Component: 400 - total flux cleaned = 0.00162189 Jy ! Component: 450 - total flux cleaned = 0.00165957 Jy ! Component: 500 - total flux cleaned = 0.00167804 Jy ! Component: 550 - total flux cleaned = 0.00173221 Jy ! Component: 600 - total flux cleaned = 0.00185583 Jy ! Component: 650 - total flux cleaned = 0.00189042 Jy ! Component: 700 - total flux cleaned = 0.00200968 Jy ! Component: 750 - total flux cleaned = 0.00205984 Jy ! Component: 800 - total flux cleaned = 0.00214197 Jy ! Component: 850 - total flux cleaned = 0.00222267 Jy ! Component: 900 - total flux cleaned = 0.00228604 Jy ! Component: 950 - total flux cleaned = 0.00233316 Jy ! Component: 1000 - total flux cleaned = 0.00242596 Jy ! Component: 1050 - total flux cleaned = 0.00248722 Jy ! Component: 1100 - total flux cleaned = 0.00253248 Jy ! Component: 1150 - total flux cleaned = 0.00257722 Jy ! Component: 1200 - total flux cleaned = 0.00263602 Jy ! Component: 1250 - total flux cleaned = 0.00267969 Jy ! Component: 1300 - total flux cleaned = 0.00275144 Jy ! Component: 1350 - total flux cleaned = 0.00276553 Jy ! Component: 1400 - total flux cleaned = 0.00282141 Jy ! Component: 1450 - total flux cleaned = 0.00286275 Jy ! Component: 1500 - total flux cleaned = 0.00289012 Jy ! Component: 1550 - total flux cleaned = 0.00294416 Jy ! Component: 1600 - total flux cleaned = 0.00299759 Jy ! Component: 1650 - total flux cleaned = 0.00301081 Jy ! Component: 1700 - total flux cleaned = 0.00303702 Jy ! Component: 1750 - total flux cleaned = 0.00301098 Jy ! Component: 1800 - total flux cleaned = 0.00304959 Jy ! Component: 1850 - total flux cleaned = 0.00308778 Jy ! Component: 1900 - total flux cleaned = 0.00316336 Jy ! Component: 1950 - total flux cleaned = 0.0031883 Jy ! Component: 2000 - total flux cleaned = 0.00322527 Jy ! Component: 2050 - total flux cleaned = 0.0032743 Jy ! Component: 2100 - total flux cleaned = 0.00334712 Jy ! Component: 2150 - total flux cleaned = 0.00332297 Jy ! Component: 2200 - total flux cleaned = 0.00338277 Jy ! Component: 2250 - total flux cleaned = 0.00340643 Jy ! Component: 2300 - total flux cleaned = 0.00344156 Jy ! Component: 2350 - total flux cleaned = 0.00344154 Jy ! Component: 2400 - total flux cleaned = 0.00346485 Jy ! Component: 2450 - total flux cleaned = 0.00348774 Jy ! Component: 2500 - total flux cleaned = 0.0035445 Jy ! Component: 2550 - total flux cleaned = 0.00355575 Jy ! Component: 2600 - total flux cleaned = 0.00357826 Jy ! Component: 2650 - total flux cleaned = 0.00363387 Jy ! Component: 2700 - total flux cleaned = 0.00364492 Jy ! Component: 2750 - total flux cleaned = 0.00372162 Jy ! Component: 2800 - total flux cleaned = 0.00373238 Jy ! Component: 2850 - total flux cleaned = 0.00375398 Jy ! Component: 2900 - total flux cleaned = 0.00378614 Jy ! Component: 2950 - total flux cleaned = 0.00382871 Jy ! Component: 3000 - total flux cleaned = 0.00388152 Jy ! Component: 3050 - total flux cleaned = 0.00390251 Jy ! Component: 3100 - total flux cleaned = 0.00392333 Jy ! Component: 3150 - total flux cleaned = 0.00397519 Jy ! Component: 3200 - total flux cleaned = 0.00398551 Jy ! Component: 3250 - total flux cleaned = 0.00408768 Jy ! Component: 3300 - total flux cleaned = 0.00407759 Jy ! Component: 3350 - total flux cleaned = 0.00414813 Jy ! Component: 3400 - total flux cleaned = 0.00416815 Jy ! Component: 3450 - total flux cleaned = 0.00421783 Jy ! Component: 3500 - total flux cleaned = 0.00423756 Jy ! Component: 3550 - total flux cleaned = 0.00427681 Jy ! Component: 3600 - total flux cleaned = 0.0043158 Jy ! Component: 3650 - total flux cleaned = 0.00433516 Jy ! Component: 3700 - total flux cleaned = 0.00434483 Jy ! Component: 3750 - total flux cleaned = 0.00443109 Jy ! Component: 3800 - total flux cleaned = 0.0044311 Jy ! Component: 3850 - total flux cleaned = 0.00447843 Jy ! Component: 3900 - total flux cleaned = 0.00449727 Jy ! Component: 3950 - total flux cleaned = 0.00455338 Jy ! Component: 4000 - total flux cleaned = 0.00459052 Jy ! Component: 4050 - total flux cleaned = 0.00464595 Jy ! Total flux subtracted in 4096 components = 0.00464592 Jy ! Clean residual min=-0.000517 max=0.000532 Jy/beam ! Clean residual mean=-0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.152385 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 337 components and 0.152385 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1232-1015_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8451 x 2.024 at -1.716 degrees (North through East) ! Clean map min=-0.0008186 max=0.11484 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1232-1015_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114845 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000147759 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.385979 0.385979 0.771958 1.54392 3.08783 6.17566 12.3513 24.7026 49.4053 98.8106 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.114 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 777.244 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1232-1015_X_uvs.log closed on Thu Apr 7 09:08:23 2016