! Started logfile: /scr/pima/bg219e_uvs/J1232-1015_X_dfm.log on Thu May 19 18:38:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1232-1015_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1232-1015_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.823755 visibilities/baseline/integration-bin.
! Found source: J1232-1015
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25800 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1232-1015_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006566Jy  sigma=22.279790
! Fit after  self-cal, rms=0.885815Jy  sigma=19.544435
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6566 mas, bmaj=1.65 mas, bpa=-3.277 degrees
! Estimated noise=0.38351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0854825 Jy
! Component: 100  -  total flux cleaned = 0.107718 Jy
! Total flux subtracted in 100 components = 0.107718 Jy
! Clean residual min=-0.004288 max=0.013230 Jy/beam
! Clean residual mean=0.000011 rms=0.001201 Jy/beam
! Combined flux in latest and established models = 0.107718 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.107718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070267Jy  sigma=1.479349
! Fit after  self-cal, rms=0.070067Jy  sigma=1.474916
! Inverting map 
! Added new window around map position (0.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133498 Jy
! Component: 100  -  total flux cleaned = 0.0207332 Jy
! Total flux subtracted in 100 components = 0.0207332 Jy
! Clean residual min=-0.002889 max=0.004958 Jy/beam
! Clean residual mean=0.000005 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.128451 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.128451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066914Jy  sigma=1.397054
! Fit after  self-cal, rms=0.066784Jy  sigma=1.394175
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00526325 Jy
! Component: 100  -  total flux cleaned = 0.00839573 Jy
! Total flux subtracted in 100 components = 0.00839573 Jy
! Clean residual min=-0.002272 max=0.002645 Jy/beam
! Clean residual mean=0.000003 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.136846 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.136846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066290Jy  sigma=1.381774
! Fit after  self-cal, rms=0.066266Jy  sigma=1.381189
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8336 mas, bmaj=1.997 mas, bpa=-1.751 degrees
! Estimated noise=0.206988 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031785 Jy
! Component: 100  -  total flux cleaned = 0.0048868 Jy
! Component: 150  -  total flux cleaned = 0.00589982 Jy
! Component: 200  -  total flux cleaned = 0.00619023 Jy
! Total flux subtracted in 200 components = 0.00619023 Jy
! Clean residual min=-0.001632 max=0.001895 Jy/beam
! Clean residual mean=0.000002 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.143037 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 34 components and 0.143037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066121Jy  sigma=1.377563
! Fit after  self-cal, rms=0.066117Jy  sigma=1.377321
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8336 x 1.997 at -1.751 degrees (North through East)
! Clean map  min=-0.0014245  max=0.11541 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.06     KP        0.99     
!   LA        1.02     MK        0.95     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.03     KP        0.98     
!   LA        1.01     MK        0.99     NL        1.04     OV        0.99     
!   PT        0.96     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.04     KP        0.95     
!   LA        0.99     MK        1.01     NL        0.99     OV        1.01     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.08     KP        1.01     
!   LA        1.02     MK        0.95     NL        1.00     OV        1.00     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.02     OV        1.03     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        0.97     
!   LA        0.98     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.05     KP        0.98     
!   LA        0.97     MK        1.03     NL        1.04     OV        0.98     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.07     KP        0.98     
!   LA        0.97     MK        1.02     NL        0.99     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.02     KP        0.98     
!   LA        0.98     MK        1.04     NL        0.98     OV        1.01     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.06     OV        0.98     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.05     KP        0.99     
!   LA        0.98     MK        1.05     NL        1.00     OV        0.96     
!   PT        0.96     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.066117Jy  sigma=1.377321
! Fit after  self-cal, rms=0.066152Jy  sigma=1.373834
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8355 mas, bmaj=1.998 mas, bpa=-1.592 degrees
! Estimated noise=0.20667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000269372 Jy
! Component: 100  -  total flux cleaned = -0.000251996 Jy
! Component: 150  -  total flux cleaned = -0.000267433 Jy
! Component: 200  -  total flux cleaned = -0.000282066 Jy
! Total flux subtracted in 200 components = -0.000282066 Jy
! Clean residual min=-0.001613 max=0.001699 Jy/beam
! Clean residual mean=0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.142755 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 39 components and 0.142755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066142Jy  sigma=1.373658
! Fit after  self-cal, rms=0.066154Jy  sigma=1.373592
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066154Jy  sigma=1.373592
! Fit after  self-cal, rms=0.066392Jy  sigma=1.370078
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.836 mas, bmaj=2.004 mas, bpa=-1.724 degrees
! Estimated noise=0.206668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.66223e-05 Jy
! Component: 100  -  total flux cleaned = -7.59532e-05 Jy
! Component: 150  -  total flux cleaned = -8.43464e-05 Jy
! Component: 200  -  total flux cleaned = -9.96884e-05 Jy
! Total flux subtracted in 200 components = -9.96884e-05 Jy
! Clean residual min=-0.001364 max=0.001484 Jy/beam
! Clean residual mean=0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.142655 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 44 components and 0.142655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066388Jy  sigma=1.370022
! Fit after  self-cal, rms=0.066404Jy  sigma=1.369962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110972 Jy
! Component: 100  -  total flux cleaned = 0.00111351 Jy
! Component: 150  -  total flux cleaned = 0.00109039 Jy
! Component: 200  -  total flux cleaned = 0.00109241 Jy
! Total flux subtracted in 200 components = 0.00109241 Jy
! Clean residual min=-0.001301 max=0.001308 Jy/beam
! Clean residual mean=0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.143747 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 64 components and 0.143747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066373Jy  sigma=1.369299
! Fit after  self-cal, rms=0.066371Jy  sigma=1.369258
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066371Jy  sigma=1.369258
! Fit after  self-cal, rms=0.066369Jy  sigma=1.369208
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8363 mas, bmaj=2.004 mas, bpa=-1.649 degrees
! Estimated noise=0.206547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000431386 Jy
! Component: 100  -  total flux cleaned = 0.000430922 Jy
! Component: 150  -  total flux cleaned = 0.000376018 Jy
! Component: 200  -  total flux cleaned = 0.000393909 Jy
! Total flux subtracted in 200 components = 0.000393909 Jy
! Clean residual min=-0.001244 max=0.001308 Jy/beam
! Clean residual mean=0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.144141 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 72 components and 0.144141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066357Jy  sigma=1.368973
! Fit after  self-cal, rms=0.066358Jy  sigma=1.368969
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.8, -4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122101 Jy
! Component: 100  -  total flux cleaned = 0.00151516 Jy
! Component: 150  -  total flux cleaned = 0.00157393 Jy
! Component: 200  -  total flux cleaned = 0.00157416 Jy
! Total flux subtracted in 200 components = 0.00157416 Jy
! Clean residual min=-0.001202 max=0.001232 Jy/beam
! Clean residual mean=0.000000 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.145715 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 98 components and 0.145716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066331Jy  sigma=1.368465
! Fit after  self-cal, rms=0.066329Jy  sigma=1.368423
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066329Jy  sigma=1.368423
! Fit after  self-cal, rms=0.066310Jy  sigma=1.368400
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=3.622 mas, bpa=2.578 degrees
! Estimated noise=0.266078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445803 Jy
! Component: 100  -  total flux cleaned = 0.000623806 Jy
! Component: 150  -  total flux cleaned = 0.000717567 Jy
! Component: 200  -  total flux cleaned = 0.000757746 Jy
! Total flux subtracted in 200 components = 0.000757746 Jy
! Clean residual min=-0.001080 max=0.001308 Jy/beam
! Clean residual mean=0.000000 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.146473 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 112 components and 0.146473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066308Jy  sigma=1.368337
! Fit after  self-cal, rms=0.066308Jy  sigma=1.368318
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.57584e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113271 Jy
! Component: 150  -  total flux cleaned = 0.000143917 Jy
! Component: 200  -  total flux cleaned = 0.000153441 Jy
! Total flux subtracted in 200 components = 0.000153441 Jy
! Clean residual min=-0.001060 max=0.001280 Jy/beam
! Clean residual mean=-0.000000 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.146627 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 123 components and 0.146627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066309Jy  sigma=1.368334
! Fit after  self-cal, rms=0.066308Jy  sigma=1.368326
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8362 mas, bmaj=2.003 mas, bpa=-1.599 degrees
! Estimated noise=0.206487 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8362 x 2.003 at -1.599 degrees (North through East)
! Clean map  min=-0.0010762  max=0.11532 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6592 mas, bmaj=1.652 mas, bpa=-3.154 degrees
! Estimated noise=0.383073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0851807 Jy
! Component: 100  -  total flux cleaned = 0.109316 Jy
! Component: 150  -  total flux cleaned = 0.122032 Jy
! Component: 200  -  total flux cleaned = 0.129268 Jy
! Total flux subtracted in 200 components = 0.129268 Jy
! Clean residual min=-0.002596 max=0.003640 Jy/beam
! Clean residual mean=0.000004 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.129268 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.129268 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8362 mas, bmaj=2.003 mas, bpa=-1.599 degrees
! Estimated noise=0.206487 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00604551 Jy
! Component: 100  -  total flux cleaned = 0.00924687 Jy
! Component: 150  -  total flux cleaned = 0.0113463 Jy
! Component: 200  -  total flux cleaned = 0.0129179 Jy
! Total flux subtracted in 200 components = 0.0129179 Jy
! Clean residual min=-0.001281 max=0.001291 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.142186 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 34 components and 0.142186 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=3.622 mas, bpa=2.578 degrees
! Estimated noise=0.266078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188711 Jy
! Component: 100  -  total flux cleaned = 0.00269466 Jy
! Component: 150  -  total flux cleaned = 0.00311648 Jy
! Component: 200  -  total flux cleaned = 0.00341851 Jy
! Total flux subtracted in 200 components = 0.00341851 Jy
! Clean residual min=-0.001160 max=0.001370 Jy/beam
! Clean residual mean=0.000001 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.145605 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261199 Jy
! Component: 100  -  total flux cleaned = 0.000407342 Jy
! Component: 150  -  total flux cleaned = 0.000517126 Jy
! Component: 200  -  total flux cleaned = 0.000612472 Jy
! Total flux subtracted in 200 components = 0.000612472 Jy
! Clean residual min=-0.001124 max=0.001362 Jy/beam
! Clean residual mean=0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.146217 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 68 components and 0.146217 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8362 mas, bmaj=2.003 mas, bpa=-1.599 degrees
! Estimated noise=0.206487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109228 Jy
! Component: 100  -  total flux cleaned = -0.00013731 Jy
! Component: 150  -  total flux cleaned = -8.75087e-05 Jy
! Component: 200  -  total flux cleaned = -2.04978e-05 Jy
! Total flux subtracted in 200 components = -2.04978e-05 Jy
! Clean residual min=-0.001150 max=0.001180 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.146197 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.146197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066324Jy  sigma=1.368551
! Fit after  self-cal, rms=0.066319Jy  sigma=1.368486
wmodel /J1232-1015_X_map.mod
! wmodel: Unable to open new model file: /J1232-1015_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1232-1015_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8362 x 2.003 at -1.599 degrees (North through East)
! Clean map  min=-0.00108  max=0.11521 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1232-1015_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.11521 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000277006 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.721304 0.721304 1.44261 2.88522 5.77044 11.5409 23.0817 46.1635 92.327
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.115 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  415.913 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1232-1015_X_dfm.log closed on Thu May 19 18:39:02 2016