! Started logfile: /scr/pima/bg219e_uvs/J1232-1015_S_uvs.log on Thu Apr 7 06:44:12 2016 obs /scr/pima/bg219e_uvs/J1232-1015_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1232-1015_S_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.812644 visibilities/baseline/integration-bin. ! Found source: J1232-1015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 8484 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1232-1015_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014941Jy sigma=18.650691 ! Fit after self-cal, rms=0.909324Jy sigma=17.114389 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.703 mas, bmaj=6.275 mas, bpa=-1.133 degrees ! Estimated noise=0.640573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.068589 Jy ! Component: 100 - total flux cleaned = 0.0849557 Jy ! Total flux subtracted in 100 components = 0.0849557 Jy ! Clean residual min=-0.005663 max=0.007300 Jy/beam ! Clean residual mean=-0.000024 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.0849558 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0849558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164734Jy sigma=1.374375 ! Fit after self-cal, rms=0.164681Jy sigma=1.372122 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=7.543 mas, bpa=-2.984 degrees ! Estimated noise=0.440994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00988018 Jy ! Component: 100 - total flux cleaned = 0.0148963 Jy ! Component: 150 - total flux cleaned = 0.0176107 Jy ! Component: 200 - total flux cleaned = 0.0191772 Jy ! Total flux subtracted in 200 components = 0.0191772 Jy ! Clean residual min=-0.004139 max=0.009794 Jy/beam ! Clean residual mean=-0.000022 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.104133 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 41 components and 0.104133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162970Jy sigma=1.354934 ! Fit after self-cal, rms=0.162970Jy sigma=1.354354 ! Inverting map ! Added new window around map position (9, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851074 Jy ! Component: 100 - total flux cleaned = 0.0126499 Jy ! Component: 150 - total flux cleaned = 0.015344 Jy ! Component: 200 - total flux cleaned = 0.0173382 Jy ! Total flux subtracted in 200 components = 0.0173382 Jy ! Clean residual min=-0.003511 max=0.003515 Jy/beam ! Clean residual mean=-0.000009 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.121471 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 92 components and 0.121471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162315Jy sigma=1.336206 ! Fit after self-cal, rms=0.162138Jy sigma=1.333787 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 7.543 at -2.984 degrees (North through East) ! Clean map min=-0.0036082 max=0.091498 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.08 HN 1.02 KP 0.97 ! LA 1.00 MK 1.02 NL 0.92 OV 1.01 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.04 HN 1.03 KP 1.06 ! LA 1.02 MK 1.06 NL 0.88 OV 0.99 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.01 KP 1.03 ! LA 0.99 MK 1.00 NL 1.04 OV 1.01 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 0.98 ! LA 1.00 MK 1.02 NL 1.00 OV 1.04 ! PT 1.00 SC 1.04 ! ! ! Fit before self-cal, rms=0.162138Jy sigma=1.333787 ! Fit after self-cal, rms=0.152707Jy sigma=1.330748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.529 mas, bpa=-2.672 degrees ! Estimated noise=0.444202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284733 Jy ! Component: 100 - total flux cleaned = 0.00469341 Jy ! Component: 150 - total flux cleaned = 0.00608649 Jy ! Component: 200 - total flux cleaned = 0.00681207 Jy ! Total flux subtracted in 200 components = 0.00681207 Jy ! Clean residual min=-0.003379 max=0.003114 Jy/beam ! Clean residual mean=-0.000009 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.128283 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 127 components and 0.128283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152457Jy sigma=1.329113 ! Fit after self-cal, rms=0.152436Jy sigma=1.328785 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152436Jy sigma=1.328785 ! Fit after self-cal, rms=0.153065Jy sigma=1.326572 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=7.531 mas, bpa=-2.606 degrees ! Estimated noise=0.45297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211228 Jy ! Component: 100 - total flux cleaned = 0.00326047 Jy ! Component: 150 - total flux cleaned = 0.00382987 Jy ! Component: 200 - total flux cleaned = 0.00418893 Jy ! Total flux subtracted in 200 components = 0.00418893 Jy ! Clean residual min=-0.003576 max=0.003102 Jy/beam ! Clean residual mean=-0.000007 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.132472 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 138 components and 0.132472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152812Jy sigma=1.326516 ! Fit after self-cal, rms=0.152812Jy sigma=1.326451 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042229 Jy ! Component: 100 - total flux cleaned = 0.000577628 Jy ! Component: 150 - total flux cleaned = 0.000692826 Jy ! Component: 200 - total flux cleaned = 0.000800598 Jy ! Total flux subtracted in 200 components = 0.000800598 Jy ! Clean residual min=-0.003559 max=0.003074 Jy/beam ! Clean residual mean=-0.000007 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.133273 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 153 components and 0.133273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152751Jy sigma=1.326334 ! Fit after self-cal, rms=0.152751Jy sigma=1.326320 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152751Jy sigma=1.326320 ! Fit after self-cal, rms=0.153300Jy sigma=1.325782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=7.514 mas, bpa=-2.472 degrees ! Estimated noise=0.460649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174268 Jy ! Component: 100 - total flux cleaned = 0.00247737 Jy ! Component: 150 - total flux cleaned = 0.00265476 Jy ! Component: 200 - total flux cleaned = 0.00276499 Jy ! Total flux subtracted in 200 components = 0.00276499 Jy ! Clean residual min=-0.003672 max=0.003082 Jy/beam ! Clean residual mean=-0.000007 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.136038 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 161 components and 0.136038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153092Jy sigma=1.326067 ! Fit after self-cal, rms=0.153093Jy sigma=1.326058 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113231 Jy ! Component: 100 - total flux cleaned = 0.000188094 Jy ! Component: 150 - total flux cleaned = 0.000235419 Jy ! Component: 200 - total flux cleaned = 0.00030298 Jy ! Total flux subtracted in 200 components = 0.00030298 Jy ! Clean residual min=-0.003648 max=0.003098 Jy/beam ! Clean residual mean=-0.000007 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.136341 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 167 components and 0.136341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153045Jy sigma=1.326020 ! Fit after self-cal, rms=0.153046Jy sigma=1.326012 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153046Jy sigma=1.326012 ! Fit after self-cal, rms=0.153517Jy sigma=1.325654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.231 mas, bmaj=12.74 mas, bpa=3.36 degrees ! Estimated noise=0.600709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205696 Jy ! Component: 100 - total flux cleaned = 0.00242608 Jy ! Component: 150 - total flux cleaned = 0.00255408 Jy ! Component: 200 - total flux cleaned = 0.00270195 Jy ! Total flux subtracted in 200 components = 0.00270195 Jy ! Clean residual min=-0.004687 max=0.003731 Jy/beam ! Clean residual mean=-0.000013 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.139043 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 178 components and 0.139043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153323Jy sigma=1.326365 ! Fit after self-cal, rms=0.153323Jy sigma=1.326248 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.42584e-06 Jy ! Component: 100 - total flux cleaned = 0.000147977 Jy ! Component: 150 - total flux cleaned = 0.000116217 Jy ! Component: 200 - total flux cleaned = 8.826e-05 Jy ! Total flux subtracted in 200 components = 8.826e-05 Jy ! Clean residual min=-0.004531 max=0.003781 Jy/beam ! Clean residual mean=-0.000013 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.139131 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 190 components and 0.139131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153273Jy sigma=1.326671 ! Fit after self-cal, rms=0.153276Jy sigma=1.326620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=7.498 mas, bpa=-2.354 degrees ! Estimated noise=0.466986 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.237 x 7.498 at -2.354 degrees (North through East) ! Clean map min=-0.0036718 max=0.096854 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=6.263 mas, bpa=-0.5972 degrees ! Estimated noise=0.677262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0723208 Jy ! Component: 100 - total flux cleaned = 0.0904186 Jy ! Component: 150 - total flux cleaned = 0.100013 Jy ! Component: 200 - total flux cleaned = 0.10703 Jy ! Total flux subtracted in 200 components = 0.10703 Jy ! Clean residual min=-0.005334 max=0.004887 Jy/beam ! Clean residual mean=-0.000019 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.10703 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.10703 Jy ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=7.498 mas, bpa=-2.354 degrees ! Estimated noise=0.466986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791716 Jy ! Component: 100 - total flux cleaned = 0.0136688 Jy ! Component: 150 - total flux cleaned = 0.0180735 Jy ! Component: 200 - total flux cleaned = 0.0214798 Jy ! Total flux subtracted in 200 components = 0.0214798 Jy ! Clean residual min=-0.004047 max=0.003310 Jy/beam ! Clean residual mean=-0.000015 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.128509 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 76 components and 0.128509 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.231 mas, bmaj=12.74 mas, bpa=3.36 degrees ! Estimated noise=0.600709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488187 Jy ! Component: 100 - total flux cleaned = 0.00785933 Jy ! Component: 150 - total flux cleaned = 0.00868931 Jy ! Component: 200 - total flux cleaned = 0.0093406 Jy ! Total flux subtracted in 200 components = 0.0093406 Jy ! Clean residual min=-0.004286 max=0.003816 Jy/beam ! Clean residual mean=-0.000015 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.13785 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474885 Jy ! Component: 100 - total flux cleaned = 0.000828155 Jy ! Component: 150 - total flux cleaned = 0.000941261 Jy ! Component: 200 - total flux cleaned = 0.00101035 Jy ! Total flux subtracted in 200 components = 0.00101035 Jy ! Clean residual min=-0.004409 max=0.003798 Jy/beam ! Clean residual mean=-0.000013 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.13886 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 134 components and 0.13886 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=7.498 mas, bpa=-2.354 degrees ! Estimated noise=0.466986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55861e-05 Jy ! Component: 100 - total flux cleaned = 6.53548e-05 Jy ! Component: 150 - total flux cleaned = 0.000163555 Jy ! Component: 200 - total flux cleaned = 0.000255588 Jy ! Total flux subtracted in 200 components = 0.000255588 Jy ! Clean residual min=-0.003776 max=0.003199 Jy/beam ! Clean residual mean=-0.000006 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.139116 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 150 components and 0.139116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153260Jy sigma=1.327301 ! Fit after self-cal, rms=0.153253Jy sigma=1.327102 wmodel /scr/pima/bg219e_uvs/J1232-1015_S_map.mod ! Writing 150 model components to file: /scr/pima/bg219e_uvs/J1232-1015_S_map.mod wobs /scr/pima/bg219e_uvs/J1232-1015_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1232-1015_S_uvs.fits wwins /scr/pima/bg219e_uvs/J1232-1015_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J1232-1015_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010743 Jy ! Component: 100 - total flux cleaned = -0.00148432 Jy ! Component: 150 - total flux cleaned = -0.00208329 Jy ! Component: 200 - total flux cleaned = -0.00264456 Jy ! Component: 250 - total flux cleaned = -0.00303293 Jy ! Component: 300 - total flux cleaned = -0.00317401 Jy ! Component: 350 - total flux cleaned = -0.00340371 Jy ! Component: 400 - total flux cleaned = -0.00362859 Jy ! Component: 450 - total flux cleaned = -0.003804 Jy ! Component: 500 - total flux cleaned = -0.00401769 Jy ! Component: 550 - total flux cleaned = -0.00414288 Jy ! Component: 600 - total flux cleaned = -0.00430682 Jy ! Component: 650 - total flux cleaned = -0.00434747 Jy ! Component: 700 - total flux cleaned = -0.00454662 Jy ! Component: 750 - total flux cleaned = -0.00462496 Jy ! Component: 800 - total flux cleaned = -0.00481823 Jy ! Component: 850 - total flux cleaned = -0.00497086 Jy ! Component: 900 - total flux cleaned = -0.00515855 Jy ! Component: 950 - total flux cleaned = -0.00538013 Jy ! Component: 1000 - total flux cleaned = -0.00548923 Jy ! Component: 1050 - total flux cleaned = -0.00559664 Jy ! Component: 1100 - total flux cleaned = -0.00563166 Jy ! Component: 1150 - total flux cleaned = -0.00577188 Jy ! Component: 1200 - total flux cleaned = -0.00580695 Jy ! Component: 1250 - total flux cleaned = -0.00594462 Jy ! Component: 1300 - total flux cleaned = -0.00614802 Jy ! Component: 1350 - total flux cleaned = -0.00614775 Jy ! Component: 1400 - total flux cleaned = -0.0062143 Jy ! Component: 1450 - total flux cleaned = -0.00634606 Jy ! Component: 1500 - total flux cleaned = -0.0062482 Jy ! Component: 1550 - total flux cleaned = -0.00634523 Jy ! Component: 1600 - total flux cleaned = -0.00631341 Jy ! Component: 1650 - total flux cleaned = -0.00637703 Jy ! Component: 1700 - total flux cleaned = -0.00647129 Jy ! Component: 1750 - total flux cleaned = -0.00653325 Jy ! Component: 1800 - total flux cleaned = -0.00644032 Jy ! Component: 1850 - total flux cleaned = -0.00653244 Jy ! Component: 1900 - total flux cleaned = -0.00650181 Jy ! Component: 1950 - total flux cleaned = -0.00650201 Jy ! Component: 2000 - total flux cleaned = -0.00653228 Jy ! Component: 2050 - total flux cleaned = -0.00656233 Jy ! Component: 2100 - total flux cleaned = -0.00656228 Jy ! Component: 2150 - total flux cleaned = -0.00659173 Jy ! Component: 2200 - total flux cleaned = -0.00656245 Jy ! Component: 2250 - total flux cleaned = -0.00656255 Jy ! Component: 2300 - total flux cleaned = -0.00659151 Jy ! Component: 2350 - total flux cleaned = -0.00664846 Jy ! Component: 2400 - total flux cleaned = -0.00662012 Jy ! Component: 2450 - total flux cleaned = -0.0066767 Jy ! Component: 2500 - total flux cleaned = -0.00664834 Jy ! Component: 2550 - total flux cleaned = -0.00662008 Jy ! Component: 2600 - total flux cleaned = -0.00659239 Jy ! Component: 2650 - total flux cleaned = -0.00662004 Jy ! Component: 2700 - total flux cleaned = -0.00656515 Jy ! Component: 2750 - total flux cleaned = -0.00659269 Jy ! Component: 2800 - total flux cleaned = -0.00662001 Jy ! Component: 2850 - total flux cleaned = -0.006593 Jy ! Component: 2900 - total flux cleaned = -0.00664677 Jy ! Component: 2950 - total flux cleaned = -0.00670025 Jy ! Component: 3000 - total flux cleaned = -0.00672686 Jy ! Component: 3050 - total flux cleaned = -0.00675335 Jy ! Component: 3100 - total flux cleaned = -0.0068324 Jy ! Component: 3150 - total flux cleaned = -0.00683236 Jy ! Component: 3200 - total flux cleaned = -0.00688468 Jy ! Component: 3250 - total flux cleaned = -0.00688461 Jy ! Component: 3300 - total flux cleaned = -0.00688471 Jy ! Component: 3350 - total flux cleaned = -0.00703926 Jy ! Component: 3400 - total flux cleaned = -0.00693648 Jy ! Component: 3450 - total flux cleaned = -0.00693663 Jy ! Component: 3500 - total flux cleaned = -0.00701309 Jy ! Component: 3550 - total flux cleaned = -0.00703847 Jy ! Component: 3600 - total flux cleaned = -0.00701325 Jy ! Component: 3650 - total flux cleaned = -0.00708853 Jy ! Component: 3700 - total flux cleaned = -0.00706345 Jy ! Component: 3750 - total flux cleaned = -0.00706338 Jy ! Component: 3800 - total flux cleaned = -0.00708819 Jy ! Component: 3850 - total flux cleaned = -0.00708812 Jy ! Component: 3900 - total flux cleaned = -0.00706354 Jy ! Component: 3950 - total flux cleaned = -0.00703903 Jy ! Component: 4000 - total flux cleaned = -0.00711231 Jy ! Component: 4050 - total flux cleaned = -0.0070394 Jy ! Total flux subtracted in 4096 components = -0.00711204 Jy ! Clean residual min=-0.001332 max=0.001750 Jy/beam ! Clean residual mean=-0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.132004 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 457 components and 0.132004 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1232-1015_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.237 x 7.498 at -2.354 degrees (North through East) ! Clean map min=-0.003415 max=0.098307 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1232-1015_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0983069 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00047393 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.44628 1.44628 2.89255 5.7851 11.5702 23.1404 46.2808 92.5616 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.098 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 207.429 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1232-1015_S_uvs.log closed on Thu Apr 7 06:44:16 2016