! Started logfile: /scr/pima/bg219e_uvs/J1210-2711_X_uvs.log on Thu Apr 7 09:07:51 2016 obs /scr/pima/bg219e_uvs/J1210-2711_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1210-2711_X_uva.fits ! AN table 1: 61 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.79745 visibilities/baseline/integration-bin. ! Found source: J1210-2711 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 26268 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1210-2711_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.004701Jy sigma=20.482564 ! Fit after self-cal, rms=0.937578Jy sigma=19.100771 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6436 mas, bmaj=1.652 mas, bpa=-5.474 degrees ! Estimated noise=0.560848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488772 Jy ! Component: 100 - total flux cleaned = 0.0601021 Jy ! Total flux subtracted in 100 components = 0.0601021 Jy ! Clean residual min=-0.003415 max=0.004315 Jy/beam ! Clean residual mean=-0.000002 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.0601021 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0601021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.071727Jy sigma=1.358407 ! Fit after self-cal, rms=0.070258Jy sigma=1.328091 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590944 Jy ! Component: 100 - total flux cleaned = 0.00925686 Jy ! Total flux subtracted in 100 components = 0.00925686 Jy ! Clean residual min=-0.003205 max=0.003298 Jy/beam ! Clean residual mean=-0.000001 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.0693589 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.0693589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069699Jy sigma=1.314346 ! Fit after self-cal, rms=0.069697Jy sigma=1.314081 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8322 mas, bmaj=2.064 mas, bpa=-2.087 degrees ! Estimated noise=0.303598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223894 Jy ! Component: 100 - total flux cleaned = 0.0030914 Jy ! Component: 150 - total flux cleaned = 0.0033618 Jy ! Component: 200 - total flux cleaned = 0.00336177 Jy ! Total flux subtracted in 200 components = 0.00336177 Jy ! Clean residual min=-0.001846 max=0.001858 Jy/beam ! Clean residual mean=-0.000002 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0727207 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0727207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069644Jy sigma=1.312586 ! Fit after self-cal, rms=0.069640Jy sigma=1.312525 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8322 x 2.064 at -2.087 degrees (North through East) ! Clean map min=-0.0016823 max=0.065726 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.92 KP 0.99 ! LA 0.98 MK 1.02 NL 1.05 OV 0.98 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.06 HN 1.03 KP 0.98 ! LA 0.98 MK 0.98 NL 1.10 OV 1.05 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.14 KP 0.99 ! LA 0.94 MK 1.03 NL 1.02 OV 1.01 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 0.92 KP 0.94 ! LA 1.03 MK 0.97 NL 1.14 OV 0.99 ! PT 0.98 SC 0.98 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.96 KP 1.07 ! LA 0.97 MK 1.07 NL 0.99 OV 0.96 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 0.95 KP 1.04 ! LA 1.04 MK 1.06 NL 1.08 OV 0.94 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 HN 0.97 KP 1.08 ! LA 0.97 MK 0.95 NL 1.04 OV 0.94 ! PT 1.00 SC 1.04 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069640Jy sigma=1.312525 ! Fit after self-cal, rms=0.069478Jy sigma=1.309799 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8332 mas, bmaj=2.068 mas, bpa=-1.891 degrees ! Estimated noise=0.303164 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.313e-05 Jy ! Component: 100 - total flux cleaned = -8.88019e-05 Jy ! Component: 150 - total flux cleaned = -0.000109369 Jy ! Component: 200 - total flux cleaned = -0.000118498 Jy ! Total flux subtracted in 200 components = -0.000118498 Jy ! Clean residual min=-0.001722 max=0.001790 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0726022 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.0726022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069475Jy sigma=1.309719 ! Fit after self-cal, rms=0.069512Jy sigma=1.309404 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.069512Jy sigma=1.309404 ! Fit after self-cal, rms=0.070566Jy sigma=1.309182 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.835 mas, bmaj=2.081 mas, bpa=-1.908 degrees ! Estimated noise=0.303211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213038 Jy ! Component: 100 - total flux cleaned = -0.000244627 Jy ! Component: 150 - total flux cleaned = -0.000262186 Jy ! Component: 200 - total flux cleaned = -0.000278284 Jy ! Total flux subtracted in 200 components = -0.000278284 Jy ! Clean residual min=-0.001695 max=0.001747 Jy/beam ! Clean residual mean=-0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0723239 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.0723239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070563Jy sigma=1.309105 ! Fit after self-cal, rms=0.070602Jy sigma=1.308968 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.4, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975488 Jy ! Component: 100 - total flux cleaned = 0.00110541 Jy ! Component: 150 - total flux cleaned = 0.00117518 Jy ! Component: 200 - total flux cleaned = 0.00119531 Jy ! Total flux subtracted in 200 components = 0.00119531 Jy ! Clean residual min=-0.001542 max=0.001379 Jy/beam ! Clean residual mean=-0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0735192 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.0735192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070561Jy sigma=1.308252 ! Fit after self-cal, rms=0.070567Jy sigma=1.308130 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070567Jy sigma=1.308130 ! Fit after self-cal, rms=0.070625Jy sigma=1.308417 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8374 mas, bmaj=2.092 mas, bpa=-1.729 degrees ! Estimated noise=0.302622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285497 Jy ! Component: 100 - total flux cleaned = 0.000286383 Jy ! Component: 150 - total flux cleaned = 0.000230176 Jy ! Component: 200 - total flux cleaned = 0.000214202 Jy ! Total flux subtracted in 200 components = 0.000214202 Jy ! Clean residual min=-0.001551 max=0.001310 Jy/beam ! Clean residual mean=-0.000001 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0737334 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 0.0737334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070609Jy sigma=1.308179 ! Fit after self-cal, rms=0.070626Jy sigma=1.308123 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.90207e-05 Jy ! Component: 100 - total flux cleaned = 4.88619e-05 Jy ! Component: 150 - total flux cleaned = 3.3546e-05 Jy ! Component: 200 - total flux cleaned = 1.98719e-05 Jy ! Total flux subtracted in 200 components = 1.98719e-05 Jy ! Clean residual min=-0.001533 max=0.001333 Jy/beam ! Clean residual mean=-0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0737533 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.0737533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070617Jy sigma=1.308017 ! Fit after self-cal, rms=0.070621Jy sigma=1.308005 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070621Jy sigma=1.308005 ! Fit after self-cal, rms=0.070584Jy sigma=1.308028 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.278 mas, bmaj=5.247 mas, bpa=1.14 degrees ! Estimated noise=0.382323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234895 Jy ! Component: 100 - total flux cleaned = 0.000144989 Jy ! Component: 150 - total flux cleaned = 0.000144071 Jy ! Component: 200 - total flux cleaned = 0.000154195 Jy ! Total flux subtracted in 200 components = 0.000154195 Jy ! Clean residual min=-0.001650 max=0.001531 Jy/beam ! Clean residual mean=-0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0739074 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 74 components and 0.0739074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070583Jy sigma=1.307978 ! Fit after self-cal, rms=0.070583Jy sigma=1.307962 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.18321e-05 Jy ! Component: 100 - total flux cleaned = 4.23231e-05 Jy ! Component: 150 - total flux cleaned = 6.02838e-05 Jy ! Component: 200 - total flux cleaned = 5.98325e-05 Jy ! Total flux subtracted in 200 components = 5.98325e-05 Jy ! Clean residual min=-0.001639 max=0.001528 Jy/beam ! Clean residual mean=-0.000002 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0739673 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 74 components and 0.0739673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070583Jy sigma=1.307948 ! Fit after self-cal, rms=0.070583Jy sigma=1.307942 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8387 mas, bmaj=2.095 mas, bpa=-1.683 degrees ! Estimated noise=0.302328 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8387 x 2.095 at -1.683 degrees (North through East) ! Clean map min=-0.0014232 max=0.065821 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6491 mas, bmaj=1.674 mas, bpa=-5.025 degrees ! Estimated noise=0.563188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499749 Jy ! Component: 100 - total flux cleaned = 0.0615511 Jy ! Component: 150 - total flux cleaned = 0.0665548 Jy ! Component: 200 - total flux cleaned = 0.0694601 Jy ! Total flux subtracted in 200 components = 0.0694601 Jy ! Clean residual min=-0.002899 max=0.003141 Jy/beam ! Clean residual mean=-0.000000 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0694601 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0694601 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8387 mas, bmaj=2.095 mas, bpa=-1.683 degrees ! Estimated noise=0.302328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191006 Jy ! Component: 100 - total flux cleaned = 0.00249623 Jy ! Component: 150 - total flux cleaned = 0.00284878 Jy ! Component: 200 - total flux cleaned = 0.00314154 Jy ! Total flux subtracted in 200 components = 0.00314154 Jy ! Clean residual min=-0.001610 max=0.001384 Jy/beam ! Clean residual mean=-0.000001 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0726017 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.0726017 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.278 mas, bmaj=5.247 mas, bpa=1.14 degrees ! Estimated noise=0.382323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922234 Jy ! Component: 100 - total flux cleaned = 0.00101685 Jy ! Component: 150 - total flux cleaned = 0.00113196 Jy ! Component: 200 - total flux cleaned = 0.00122324 Jy ! Total flux subtracted in 200 components = 0.00122324 Jy ! Clean residual min=-0.001657 max=0.001523 Jy/beam ! Clean residual mean=-0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0738249 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.04678e-05 Jy ! Component: 100 - total flux cleaned = 8.2565e-05 Jy ! Component: 150 - total flux cleaned = 0.00010931 Jy ! Component: 200 - total flux cleaned = 0.000116946 Jy ! Total flux subtracted in 200 components = 0.000116946 Jy ! Clean residual min=-0.001634 max=0.001528 Jy/beam ! Clean residual mean=-0.000002 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0739419 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.0739418 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8387 mas, bmaj=2.095 mas, bpa=-1.683 degrees ! Estimated noise=0.302328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191936 Jy ! Component: 100 - total flux cleaned = -0.000282344 Jy ! Component: 150 - total flux cleaned = -0.000342728 Jy ! Component: 200 - total flux cleaned = -0.000342874 Jy ! Total flux subtracted in 200 components = -0.000342874 Jy ! Clean residual min=-0.001529 max=0.001343 Jy/beam ! Clean residual mean=-0.000001 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.073599 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.073599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.070593Jy sigma=1.308146 ! Fit after self-cal, rms=0.070588Jy sigma=1.308072 wmodel /scr/pima/bg219e_uvs/J1210-2711_X_map.mod ! Writing 58 model components to file: /scr/pima/bg219e_uvs/J1210-2711_X_map.mod wobs /scr/pima/bg219e_uvs/J1210-2711_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1210-2711_X_uvs.fits wwins /scr/pima/bg219e_uvs/J1210-2711_X_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J1210-2711_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000690077 Jy ! Component: 100 - total flux cleaned = -0.0012725 Jy ! Component: 150 - total flux cleaned = -0.0016801 Jy ! Component: 200 - total flux cleaned = -0.00193348 Jy ! Component: 250 - total flux cleaned = -0.00217939 Jy ! Component: 300 - total flux cleaned = -0.00237487 Jy ! Component: 350 - total flux cleaned = -0.0025446 Jy ! Component: 400 - total flux cleaned = -0.00266882 Jy ! Component: 450 - total flux cleaned = -0.00274943 Jy ! Component: 500 - total flux cleaned = -0.00282873 Jy ! Component: 550 - total flux cleaned = -0.00292543 Jy ! Component: 600 - total flux cleaned = -0.00288784 Jy ! Component: 650 - total flux cleaned = -0.00300002 Jy ! Component: 700 - total flux cleaned = -0.00303646 Jy ! Component: 750 - total flux cleaned = -0.00310816 Jy ! Component: 800 - total flux cleaned = -0.00310784 Jy ! Component: 850 - total flux cleaned = -0.00317768 Jy ! Component: 900 - total flux cleaned = -0.00321179 Jy ! Component: 950 - total flux cleaned = -0.0032626 Jy ! Component: 1000 - total flux cleaned = -0.00326243 Jy ! Component: 1050 - total flux cleaned = -0.00332883 Jy ! Component: 1100 - total flux cleaned = -0.00337796 Jy ! Component: 1150 - total flux cleaned = -0.00344257 Jy ! Component: 1200 - total flux cleaned = -0.00349032 Jy ! Component: 1250 - total flux cleaned = -0.00347458 Jy ! Component: 1300 - total flux cleaned = -0.00352165 Jy ! Component: 1350 - total flux cleaned = -0.00352189 Jy ! Component: 1400 - total flux cleaned = -0.00356771 Jy ! Component: 1450 - total flux cleaned = -0.00355265 Jy ! Component: 1500 - total flux cleaned = -0.00353783 Jy ! Component: 1550 - total flux cleaned = -0.00358204 Jy ! Component: 1600 - total flux cleaned = -0.00365507 Jy ! Component: 1650 - total flux cleaned = -0.00365511 Jy ! Component: 1700 - total flux cleaned = -0.00362655 Jy ! Component: 1750 - total flux cleaned = -0.00366906 Jy ! Component: 1800 - total flux cleaned = -0.00362719 Jy ! Component: 1850 - total flux cleaned = -0.00368286 Jy ! Component: 1900 - total flux cleaned = -0.00372424 Jy ! Component: 1950 - total flux cleaned = -0.00373763 Jy ! Component: 2000 - total flux cleaned = -0.00372419 Jy ! Component: 2050 - total flux cleaned = -0.00377771 Jy ! Component: 2100 - total flux cleaned = -0.00376451 Jy ! Component: 2150 - total flux cleaned = -0.00376443 Jy ! Component: 2200 - total flux cleaned = -0.00377763 Jy ! Component: 2250 - total flux cleaned = -0.00379045 Jy ! Component: 2300 - total flux cleaned = -0.00379042 Jy ! Component: 2350 - total flux cleaned = -0.00381569 Jy ! Component: 2400 - total flux cleaned = -0.00384093 Jy ! Component: 2450 - total flux cleaned = -0.00389066 Jy ! Component: 2500 - total flux cleaned = -0.00390308 Jy ! Component: 2550 - total flux cleaned = -0.00392772 Jy ! Component: 2600 - total flux cleaned = -0.00395207 Jy ! Component: 2650 - total flux cleaned = -0.00398833 Jy ! Component: 2700 - total flux cleaned = -0.004048 Jy ! Component: 2750 - total flux cleaned = -0.00408371 Jy ! Component: 2800 - total flux cleaned = -0.00411908 Jy ! Component: 2850 - total flux cleaned = -0.00420091 Jy ! Component: 2900 - total flux cleaned = -0.00421248 Jy ! Component: 2950 - total flux cleaned = -0.00425843 Jy ! Component: 3000 - total flux cleaned = -0.00426969 Jy ! Component: 3050 - total flux cleaned = -0.0042811 Jy ! Component: 3100 - total flux cleaned = -0.00429241 Jy ! Component: 3150 - total flux cleaned = -0.00432611 Jy ! Component: 3200 - total flux cleaned = -0.00437063 Jy ! Component: 3250 - total flux cleaned = -0.00438173 Jy ! Component: 3300 - total flux cleaned = -0.00441473 Jy ! Component: 3350 - total flux cleaned = -0.0044257 Jy ! Component: 3400 - total flux cleaned = -0.00442579 Jy ! Component: 3450 - total flux cleaned = -0.00449046 Jy ! Component: 3500 - total flux cleaned = -0.00451192 Jy ! Component: 3550 - total flux cleaned = -0.00455455 Jy ! Component: 3600 - total flux cleaned = -0.00454401 Jy ! Component: 3650 - total flux cleaned = -0.00457557 Jy ! Component: 3700 - total flux cleaned = -0.00460707 Jy ! Component: 3750 - total flux cleaned = -0.00464867 Jy ! Component: 3800 - total flux cleaned = -0.00470028 Jy ! Component: 3850 - total flux cleaned = -0.00473112 Jy ! Component: 3900 - total flux cleaned = -0.00478208 Jy ! Component: 3950 - total flux cleaned = -0.00485301 Jy ! Component: 4000 - total flux cleaned = -0.00489326 Jy ! Component: 4050 - total flux cleaned = -0.00495336 Jy ! Total flux subtracted in 4096 components = -0.00497331 Jy ! Clean residual min=-0.000534 max=0.000562 Jy/beam ! Clean residual mean=0.000000 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.0686257 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 334 components and 0.0686256 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1210-2711_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8387 x 2.095 at -1.683 degrees (North through East) ! Clean map min=-0.0012158 max=0.065698 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1210-2711_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0656979 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000168769 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.770657 0.770657 1.54131 3.08263 6.16526 12.3305 24.661 49.3221 98.6441 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.065 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 389.278 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1210-2711_X_uvs.log closed on Thu Apr 7 09:07:55 2016