! Started logfile: /scr/pima/bg219e_uvs/J1210-2711_S_uvs.log on Thu Apr  7 06:43:47 2016
obs /scr/pima/bg219e_uvs/J1210-2711_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1210-2711_S_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.510383 visibilities/baseline/integration-bin.
! Found source: J1210-2711
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5604 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1210-2711_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 153 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 153 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 153 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 153 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006489Jy  sigma=17.694451
! Fit after  self-cal, rms=0.944169Jy  sigma=16.661774
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.2 mas, bmaj=8.753 mas, bpa=-10.14 degrees
! Estimated noise=1.05912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0450553 Jy
! Component: 100  -  total flux cleaned = 0.055153 Jy
! Total flux subtracted in 100 components = 0.055153 Jy
! Clean residual min=-0.005269 max=0.005202 Jy/beam
! Clean residual mean=0.000002 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 0.055153 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.055153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075609Jy  sigma=1.287417
! Fit after  self-cal, rms=0.073421Jy  sigma=1.249966
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.349 mas, bmaj=11.42 mas, bpa=-5.914 degrees
! Estimated noise=0.594969 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00603887 Jy
! Component: 100  -  total flux cleaned = 0.00811904 Jy
! Component: 150  -  total flux cleaned = 0.00867966 Jy
! Component: 200  -  total flux cleaned = 0.0086799 Jy
! Total flux subtracted in 200 components = 0.0086799 Jy
! Clean residual min=-0.003102 max=0.003101 Jy/beam
! Clean residual mean=0.000006 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.0638329 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 0.063833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073004Jy  sigma=1.242209
! Fit after  self-cal, rms=0.073002Jy  sigma=1.242083
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.349 x 11.42 at -5.914 degrees (North through East)
! Clean map  min=-0.0030518  max=0.061312 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.073002Jy  sigma=1.242083
! Fit after  self-cal, rms=0.073002Jy  sigma=1.242083
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.349 mas, bmaj=11.42 mas, bpa=-5.914 degrees
! Estimated noise=0.594969 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000219945 Jy
! Component: 100  -  total flux cleaned = 0.000170177 Jy
! Component: 150  -  total flux cleaned = 0.000146629 Jy
! Component: 200  -  total flux cleaned = 0.000125138 Jy
! Total flux subtracted in 200 components = 0.000125138 Jy
! Clean residual min=-0.003114 max=0.003096 Jy/beam
! Clean residual mean=0.000006 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.0639581 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 32 components and 0.0639581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072988Jy  sigma=1.241809
! Fit after  self-cal, rms=0.072988Jy  sigma=1.241789
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072988Jy  sigma=1.241789
! Fit after  self-cal, rms=0.075972Jy  sigma=1.241980
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.405 mas, bmaj=11.58 mas, bpa=-4.849 degrees
! Estimated noise=0.612954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137026 Jy
! Component: 100  -  total flux cleaned = 0.00140852 Jy
! Component: 150  -  total flux cleaned = 0.00140875 Jy
! Component: 200  -  total flux cleaned = 0.00135502 Jy
! Total flux subtracted in 200 components = 0.00135502 Jy
! Clean residual min=-0.003414 max=0.002936 Jy/beam
! Clean residual mean=0.000015 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.0653131 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.0653131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075910Jy  sigma=1.241456
! Fit after  self-cal, rms=0.076068Jy  sigma=1.240587
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.07367e-05 Jy
! Component: 100  -  total flux cleaned = -0.000104033 Jy
! Component: 150  -  total flux cleaned = -0.000164622 Jy
! Component: 200  -  total flux cleaned = -0.000202578 Jy
! Total flux subtracted in 200 components = -0.000202578 Jy
! Clean residual min=-0.003267 max=0.002975 Jy/beam
! Clean residual mean=0.000008 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.0651105 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 49 components and 0.0651105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076054Jy  sigma=1.240447
! Fit after  self-cal, rms=0.076053Jy  sigma=1.240432
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076053Jy  sigma=1.240432
! Fit after  self-cal, rms=0.077006Jy  sigma=1.240169
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.425 mas, bmaj=11.59 mas, bpa=-4.513 degrees
! Estimated noise=0.620704 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000569915 Jy
! Component: 100  -  total flux cleaned = 0.000543944 Jy
! Component: 150  -  total flux cleaned = 0.00052315 Jy
! Component: 200  -  total flux cleaned = 0.000484759 Jy
! Total flux subtracted in 200 components = 0.000484759 Jy
! Clean residual min=-0.003311 max=0.002983 Jy/beam
! Clean residual mean=0.000008 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.0655953 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.0655953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076983Jy  sigma=1.239996
! Fit after  self-cal, rms=0.077006Jy  sigma=1.239971
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.93934e-05 Jy
! Component: 100  -  total flux cleaned = -9.41029e-05 Jy
! Component: 150  -  total flux cleaned = -0.000140077 Jy
! Component: 200  -  total flux cleaned = -0.000168123 Jy
! Total flux subtracted in 200 components = -0.000168123 Jy
! Clean residual min=-0.003287 max=0.002952 Jy/beam
! Clean residual mean=0.000007 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.0654272 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 55 components and 0.0654272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076997Jy  sigma=1.239902
! Fit after  self-cal, rms=0.076997Jy  sigma=1.239890
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076997Jy  sigma=1.239890
! Fit after  self-cal, rms=0.077499Jy  sigma=1.239817
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.712 mas, bmaj=22.07 mas, bpa=0.3914 degrees
! Estimated noise=0.702279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000242287 Jy
! Component: 100  -  total flux cleaned = 0.000240713 Jy
! Component: 150  -  total flux cleaned = 0.00023222 Jy
! Component: 200  -  total flux cleaned = 0.000232098 Jy
! Total flux subtracted in 200 components = 0.000232098 Jy
! Clean residual min=-0.003162 max=0.002671 Jy/beam
! Clean residual mean=0.000011 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.0656593 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 61 components and 0.0656593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077500Jy  sigma=1.239821
! Fit after  self-cal, rms=0.077512Jy  sigma=1.239807
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.79839e-05 Jy
! Component: 100  -  total flux cleaned = 2.82674e-05 Jy
! Component: 150  -  total flux cleaned = 1.44461e-05 Jy
! Component: 200  -  total flux cleaned = 8.3456e-06 Jy
! Total flux subtracted in 200 components = 8.3456e-06 Jy
! Clean residual min=-0.003165 max=0.002673 Jy/beam
! Clean residual mean=0.000011 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.0656676 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 65 components and 0.0656676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077512Jy  sigma=1.239822
! Fit after  self-cal, rms=0.077513Jy  sigma=1.239816
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.44 mas, bmaj=11.6 mas, bpa=-4.3 degrees
! Estimated noise=0.624674 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.44 x 11.6 at -4.3 degrees (North through East)
! Clean map  min=-0.0032661  max=0.065059 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.259 mas, bmaj=8.774 mas, bpa=-8.608 degrees
! Estimated noise=1.13232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.049775 Jy
! Component: 100  -  total flux cleaned = 0.0613117 Jy
! Component: 150  -  total flux cleaned = 0.0654199 Jy
! Component: 200  -  total flux cleaned = 0.0659109 Jy
! Total flux subtracted in 200 components = 0.0659109 Jy
! Clean residual min=-0.005187 max=0.005244 Jy/beam
! Clean residual mean=0.000008 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.0659109 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0659109 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.44 mas, bmaj=11.6 mas, bpa=-4.3 degrees
! Estimated noise=0.624674 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0005701 Jy
! Component: 100  -  total flux cleaned = 0.000565602 Jy
! Component: 150  -  total flux cleaned = 0.000484397 Jy
! Component: 200  -  total flux cleaned = 0.000436254 Jy
! Total flux subtracted in 200 components = 0.000436254 Jy
! Clean residual min=-0.003411 max=0.003029 Jy/beam
! Clean residual mean=0.000009 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.0663471 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 25 components and 0.0663471 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.712 mas, bmaj=22.07 mas, bpa=0.3914 degrees
! Estimated noise=0.702279 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000188354 Jy
! Component: 100  -  total flux cleaned = -0.000188509 Jy
! Component: 150  -  total flux cleaned = -0.000200329 Jy
! Component: 200  -  total flux cleaned = -0.000234903 Jy
! Total flux subtracted in 200 components = -0.000234903 Jy
! Clean residual min=-0.003145 max=0.002758 Jy/beam
! Clean residual mean=0.000013 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.0661122 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.26469e-05 Jy
! Component: 100  -  total flux cleaned = -6.29981e-05 Jy
! Component: 150  -  total flux cleaned = -8.22679e-05 Jy
! Component: 200  -  total flux cleaned = -0.000109612 Jy
! Total flux subtracted in 200 components = -0.000109612 Jy
! Clean residual min=-0.003154 max=0.002741 Jy/beam
! Clean residual mean=0.000012 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.0660026 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 34 components and 0.0660026 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.44 mas, bmaj=11.6 mas, bpa=-4.3 degrees
! Estimated noise=0.624674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.33954e-05 Jy
! Component: 100  -  total flux cleaned = 4.92096e-05 Jy
! Component: 150  -  total flux cleaned = 4.47019e-06 Jy
! Component: 200  -  total flux cleaned = -3.4768e-05 Jy
! Total flux subtracted in 200 components = -3.4768e-05 Jy
! Clean residual min=-0.003362 max=0.002949 Jy/beam
! Clean residual mean=0.000008 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.0659678 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.0659679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077519Jy  sigma=1.240040
! Fit after  self-cal, rms=0.077511Jy  sigma=1.239976
wmodel /scr/pima/bg219e_uvs/J1210-2711_S_map.mod
! Writing 44 model components to file: /scr/pima/bg219e_uvs/J1210-2711_S_map.mod
wobs /scr/pima/bg219e_uvs/J1210-2711_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1210-2711_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J1210-2711_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219e_uvs/J1210-2711_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000664645 Jy
! Component: 100  -  total flux cleaned = -0.00041868 Jy
! Component: 150  -  total flux cleaned = 3.67314e-05 Jy
! Component: 200  -  total flux cleaned = 0.000167172 Jy
! Component: 250  -  total flux cleaned = 8.63328e-05 Jy
! Component: 300  -  total flux cleaned = 8.59525e-05 Jy
! Component: 350  -  total flux cleaned = 4.62045e-05 Jy
! Component: 400  -  total flux cleaned = -6.48222e-05 Jy
! Component: 450  -  total flux cleaned = -0.000101167 Jy
! Component: 500  -  total flux cleaned = -0.000101864 Jy
! Component: 550  -  total flux cleaned = -0.000135242 Jy
! Component: 600  -  total flux cleaned = -0.000199931 Jy
! Component: 650  -  total flux cleaned = -0.000231377 Jy
! Component: 700  -  total flux cleaned = -0.000324005 Jy
! Component: 750  -  total flux cleaned = -0.000445236 Jy
! Component: 800  -  total flux cleaned = -0.000357221 Jy
! Component: 850  -  total flux cleaned = -0.000473338 Jy
! Component: 900  -  total flux cleaned = -0.000443955 Jy
! Component: 950  -  total flux cleaned = -0.000388229 Jy
! Component: 1000  -  total flux cleaned = -0.000497525 Jy
! Component: 1050  -  total flux cleaned = -0.000497535 Jy
! Component: 1100  -  total flux cleaned = -0.000523534 Jy
! Component: 1150  -  total flux cleaned = -0.000497588 Jy
! Component: 1200  -  total flux cleaned = -0.000572875 Jy
! Component: 1250  -  total flux cleaned = -0.000473181 Jy
! Component: 1300  -  total flux cleaned = -0.000424117 Jy
! Component: 1350  -  total flux cleaned = -0.0002802 Jy
! Component: 1400  -  total flux cleaned = -0.000256945 Jy
! Component: 1450  -  total flux cleaned = -0.000233889 Jy
! Component: 1500  -  total flux cleaned = -0.000211292 Jy
! Component: 1550  -  total flux cleaned = -0.0001882 Jy
! Component: 1600  -  total flux cleaned = -5.50895e-05 Jy
! Component: 1650  -  total flux cleaned = 5.34471e-05 Jy
! Component: 1700  -  total flux cleaned = 9.67437e-05 Jy
! Component: 1750  -  total flux cleaned = 0.000138791 Jy
! Component: 1800  -  total flux cleaned = 0.000243188 Jy
! Component: 1850  -  total flux cleaned = 0.000284861 Jy
! Component: 1900  -  total flux cleaned = 0.000305229 Jy
! Component: 1950  -  total flux cleaned = 0.000284915 Jy
! Component: 2000  -  total flux cleaned = 0.000245138 Jy
! Component: 2050  -  total flux cleaned = 0.000283967 Jy
! Component: 2100  -  total flux cleaned = 0.000244864 Jy
! Component: 2150  -  total flux cleaned = 0.0002255 Jy
! Component: 2200  -  total flux cleaned = 0.000131002 Jy
! Component: 2250  -  total flux cleaned = 0.00018692 Jy
! Component: 2300  -  total flux cleaned = 3.9734e-05 Jy
! Component: 2350  -  total flux cleaned = -3.22562e-05 Jy
! Component: 2400  -  total flux cleaned = -3.21914e-05 Jy
! Component: 2450  -  total flux cleaned = -5.01478e-05 Jy
! Component: 2500  -  total flux cleaned = -0.000120367 Jy
! Component: 2550  -  total flux cleaned = -0.000172458 Jy
! Component: 2600  -  total flux cleaned = -0.00025828 Jy
! Component: 2650  -  total flux cleaned = -0.00024103 Jy
! Component: 2700  -  total flux cleaned = -0.000291194 Jy
! Component: 2750  -  total flux cleaned = -0.000257959 Jy
! Component: 2800  -  total flux cleaned = -0.000323798 Jy
! Component: 2850  -  total flux cleaned = -0.000307657 Jy
! Component: 2900  -  total flux cleaned = -0.000307649 Jy
! Component: 2950  -  total flux cleaned = -0.000355302 Jy
! Component: 3000  -  total flux cleaned = -0.00037107 Jy
! Component: 3050  -  total flux cleaned = -0.000386799 Jy
! Component: 3100  -  total flux cleaned = -0.000417873 Jy
! Component: 3150  -  total flux cleaned = -0.000463814 Jy
! Component: 3200  -  total flux cleaned = -0.000479112 Jy
! Component: 3250  -  total flux cleaned = -0.000509332 Jy
! Component: 3300  -  total flux cleaned = -0.00052406 Jy
! Component: 3350  -  total flux cleaned = -0.000479963 Jy
! Component: 3400  -  total flux cleaned = -0.000552741 Jy
! Component: 3450  -  total flux cleaned = -0.000595962 Jy
! Component: 3500  -  total flux cleaned = -0.000595968 Jy
! Component: 3550  -  total flux cleaned = -0.000610088 Jy
! Component: 3600  -  total flux cleaned = -0.000624001 Jy
! Component: 3650  -  total flux cleaned = -0.000693612 Jy
! Component: 3700  -  total flux cleaned = -0.000665838 Jy
! Component: 3750  -  total flux cleaned = -0.000693243 Jy
! Component: 3800  -  total flux cleaned = -0.000693284 Jy
! Component: 3850  -  total flux cleaned = -0.000693216 Jy
! Component: 3900  -  total flux cleaned = -0.00067987 Jy
! Component: 3950  -  total flux cleaned = -0.000746229 Jy
! Component: 4000  -  total flux cleaned = -0.000706572 Jy
! Component: 4050  -  total flux cleaned = -0.000706498 Jy
! Total flux subtracted in 4096 components = -0.000693539 Jy
! Clean residual min=-0.000689 max=0.000746 Jy/beam
! Clean residual mean=0.000002 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0652743 Jy
keep
! Adding 239 model components to the UV plane model.
! The established model now contains 283 components and 0.0652743 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1210-2711_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.44 x 11.6 at -4.3 degrees (North through East)
! Clean map  min=-0.0021824  max=0.064749 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1210-2711_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0647494 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000234768 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08774 1.08774 2.17547 4.35095 8.70189 17.4038 34.8076 69.6151
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.064 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  275.802 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1210-2711_S_uvs.log closed on Thu Apr  7 06:43:51 2016