! Started logfile: /scr/pima/bg219e_uvs/J1210-2711_S_dfm.log on Thu May 19 18:38:08 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219e_uvs/J1210-2711_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1210-2711_S_uva.fits ! AN table 1: 61 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.510383 visibilities/baseline/integration-bin. ! Found source: J1210-2711 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 5604 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1210-2711_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006489Jy sigma=17.694451 ! Fit after self-cal, rms=0.944169Jy sigma=16.661774 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=8.753 mas, bpa=-10.14 degrees ! Estimated noise=1.05912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450553 Jy ! Component: 100 - total flux cleaned = 0.055153 Jy ! Total flux subtracted in 100 components = 0.055153 Jy ! Clean residual min=-0.005269 max=0.005202 Jy/beam ! Clean residual mean=0.000002 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.055153 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.055153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075609Jy sigma=1.287417 ! Fit after self-cal, rms=0.073421Jy sigma=1.249966 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.349 mas, bmaj=11.42 mas, bpa=-5.914 degrees ! Estimated noise=0.594969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603887 Jy ! Component: 100 - total flux cleaned = 0.00811904 Jy ! Component: 150 - total flux cleaned = 0.00867966 Jy ! Component: 200 - total flux cleaned = 0.0086799 Jy ! Total flux subtracted in 200 components = 0.0086799 Jy ! Clean residual min=-0.003102 max=0.003101 Jy/beam ! Clean residual mean=0.000006 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0638329 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.063833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073004Jy sigma=1.242209 ! Fit after self-cal, rms=0.073002Jy sigma=1.242083 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.349 x 11.42 at -5.914 degrees (North through East) ! Clean map min=-0.0030518 max=0.061312 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.073002Jy sigma=1.242083 ! Fit after self-cal, rms=0.073002Jy sigma=1.242083 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.349 mas, bmaj=11.42 mas, bpa=-5.914 degrees ! Estimated noise=0.594969 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219945 Jy ! Component: 100 - total flux cleaned = 0.000170177 Jy ! Component: 150 - total flux cleaned = 0.000146629 Jy ! Component: 200 - total flux cleaned = 0.000125138 Jy ! Total flux subtracted in 200 components = 0.000125138 Jy ! Clean residual min=-0.003114 max=0.003096 Jy/beam ! Clean residual mean=0.000006 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0639581 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0639581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072988Jy sigma=1.241809 ! Fit after self-cal, rms=0.072988Jy sigma=1.241789 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072988Jy sigma=1.241789 ! Fit after self-cal, rms=0.075972Jy sigma=1.241980 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.405 mas, bmaj=11.58 mas, bpa=-4.849 degrees ! Estimated noise=0.612954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137026 Jy ! Component: 100 - total flux cleaned = 0.00140852 Jy ! Component: 150 - total flux cleaned = 0.00140875 Jy ! Component: 200 - total flux cleaned = 0.00135502 Jy ! Total flux subtracted in 200 components = 0.00135502 Jy ! Clean residual min=-0.003414 max=0.002936 Jy/beam ! Clean residual mean=0.000015 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.0653131 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0653131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075910Jy sigma=1.241456 ! Fit after self-cal, rms=0.076068Jy sigma=1.240587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.07367e-05 Jy ! Component: 100 - total flux cleaned = -0.000104033 Jy ! Component: 150 - total flux cleaned = -0.000164622 Jy ! Component: 200 - total flux cleaned = -0.000202578 Jy ! Total flux subtracted in 200 components = -0.000202578 Jy ! Clean residual min=-0.003267 max=0.002975 Jy/beam ! Clean residual mean=0.000008 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0651105 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0651105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076054Jy sigma=1.240447 ! Fit after self-cal, rms=0.076053Jy sigma=1.240432 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076053Jy sigma=1.240432 ! Fit after self-cal, rms=0.077006Jy sigma=1.240169 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.425 mas, bmaj=11.59 mas, bpa=-4.513 degrees ! Estimated noise=0.620704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569915 Jy ! Component: 100 - total flux cleaned = 0.000543944 Jy ! Component: 150 - total flux cleaned = 0.00052315 Jy ! Component: 200 - total flux cleaned = 0.000484759 Jy ! Total flux subtracted in 200 components = 0.000484759 Jy ! Clean residual min=-0.003311 max=0.002983 Jy/beam ! Clean residual mean=0.000008 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.0655953 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.0655953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076983Jy sigma=1.239996 ! Fit after self-cal, rms=0.077006Jy sigma=1.239971 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.93934e-05 Jy ! Component: 100 - total flux cleaned = -9.41029e-05 Jy ! Component: 150 - total flux cleaned = -0.000140077 Jy ! Component: 200 - total flux cleaned = -0.000168123 Jy ! Total flux subtracted in 200 components = -0.000168123 Jy ! Clean residual min=-0.003287 max=0.002952 Jy/beam ! Clean residual mean=0.000007 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0654272 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.0654272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076997Jy sigma=1.239902 ! Fit after self-cal, rms=0.076997Jy sigma=1.239890 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076997Jy sigma=1.239890 ! Fit after self-cal, rms=0.077499Jy sigma=1.239817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.712 mas, bmaj=22.07 mas, bpa=0.3914 degrees ! Estimated noise=0.702279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242287 Jy ! Component: 100 - total flux cleaned = 0.000240713 Jy ! Component: 150 - total flux cleaned = 0.00023222 Jy ! Component: 200 - total flux cleaned = 0.000232098 Jy ! Total flux subtracted in 200 components = 0.000232098 Jy ! Clean residual min=-0.003162 max=0.002671 Jy/beam ! Clean residual mean=0.000011 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.0656593 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 0.0656593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077500Jy sigma=1.239821 ! Fit after self-cal, rms=0.077512Jy sigma=1.239807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79839e-05 Jy ! Component: 100 - total flux cleaned = 2.82674e-05 Jy ! Component: 150 - total flux cleaned = 1.44461e-05 Jy ! Component: 200 - total flux cleaned = 8.3456e-06 Jy ! Total flux subtracted in 200 components = 8.3456e-06 Jy ! Clean residual min=-0.003165 max=0.002673 Jy/beam ! Clean residual mean=0.000011 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.0656676 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 65 components and 0.0656676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077512Jy sigma=1.239822 ! Fit after self-cal, rms=0.077513Jy sigma=1.239816 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.44 mas, bmaj=11.6 mas, bpa=-4.3 degrees ! Estimated noise=0.624674 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.44 x 11.6 at -4.3 degrees (North through East) ! Clean map min=-0.0032661 max=0.065059 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=8.774 mas, bpa=-8.608 degrees ! Estimated noise=1.13232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049775 Jy ! Component: 100 - total flux cleaned = 0.0613117 Jy ! Component: 150 - total flux cleaned = 0.0654199 Jy ! Component: 200 - total flux cleaned = 0.0659109 Jy ! Total flux subtracted in 200 components = 0.0659109 Jy ! Clean residual min=-0.005187 max=0.005244 Jy/beam ! Clean residual mean=0.000008 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.0659109 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0659109 Jy ! Inverting map and beam ! Estimated beam: bmin=4.44 mas, bmaj=11.6 mas, bpa=-4.3 degrees ! Estimated noise=0.624674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005701 Jy ! Component: 100 - total flux cleaned = 0.000565602 Jy ! Component: 150 - total flux cleaned = 0.000484397 Jy ! Component: 200 - total flux cleaned = 0.000436254 Jy ! Total flux subtracted in 200 components = 0.000436254 Jy ! Clean residual min=-0.003411 max=0.003029 Jy/beam ! Clean residual mean=0.000009 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0663471 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.0663471 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.712 mas, bmaj=22.07 mas, bpa=0.3914 degrees ! Estimated noise=0.702279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188354 Jy ! Component: 100 - total flux cleaned = -0.000188509 Jy ! Component: 150 - total flux cleaned = -0.000200329 Jy ! Component: 200 - total flux cleaned = -0.000234903 Jy ! Total flux subtracted in 200 components = -0.000234903 Jy ! Clean residual min=-0.003145 max=0.002758 Jy/beam ! Clean residual mean=0.000013 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.0661122 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.26469e-05 Jy ! Component: 100 - total flux cleaned = -6.29981e-05 Jy ! Component: 150 - total flux cleaned = -8.22679e-05 Jy ! Component: 200 - total flux cleaned = -0.000109612 Jy ! Total flux subtracted in 200 components = -0.000109612 Jy ! Clean residual min=-0.003154 max=0.002741 Jy/beam ! Clean residual mean=0.000012 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.0660026 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0660026 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.44 mas, bmaj=11.6 mas, bpa=-4.3 degrees ! Estimated noise=0.624674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.33954e-05 Jy ! Component: 100 - total flux cleaned = 4.92096e-05 Jy ! Component: 150 - total flux cleaned = 4.47019e-06 Jy ! Component: 200 - total flux cleaned = -3.4768e-05 Jy ! Total flux subtracted in 200 components = -3.4768e-05 Jy ! Clean residual min=-0.003362 max=0.002949 Jy/beam ! Clean residual mean=0.000008 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.0659678 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0659679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077519Jy sigma=1.240040 ! Fit after self-cal, rms=0.077511Jy sigma=1.239976 wmodel /J1210-2711_S_map.mod ! wmodel: Unable to open new model file: /J1210-2711_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219e_uvs/J1210-2711_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.44 x 11.6 at -4.3 degrees (North through East) ! Clean map min=-0.0032836 max=0.064704 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1210-2711_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0647036 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000784444 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.63709 3.63709 7.27419 14.5484 29.0967 58.1935 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.064 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 82.483 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1210-2711_S_dfm.log closed on Thu May 19 18:38:10 2016