! Started logfile: /scr/pima/bg219e_uvs/J1209-2032_X_uvs.log on Thu Apr  7 09:07:46 2016
obs /scr/pima/bg219e_uvs/J1209-2032_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1209-2032_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.886508 visibilities/baseline/integration-bin.
! Found source: J1209-2032
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13404 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1209-2032_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.061273Jy  sigma=21.291689
! Fit after  self-cal, rms=0.714410Jy  sigma=14.476564
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.649 mas, bmaj=1.67 mas, bpa=-4.962 degrees
! Estimated noise=0.684981 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207521 Jy
! Component: 100  -  total flux cleaned = 0.295369 Jy
! Total flux subtracted in 100 components = 0.295369 Jy
! Clean residual min=-0.021215 max=0.065586 Jy/beam
! Clean residual mean=-0.000037 rms=0.006481 Jy/beam
! Combined flux in latest and established models = 0.295369 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.295369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.154788Jy  sigma=3.051376
! Fit after  self-cal, rms=0.154178Jy  sigma=3.039448
! Inverting map 
! Added new window around map position (0.8, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0633932 Jy
! Component: 100  -  total flux cleaned = 0.100904 Jy
! Total flux subtracted in 100 components = 0.100904 Jy
! Clean residual min=-0.012577 max=0.041244 Jy/beam
! Clean residual mean=-0.000022 rms=0.003801 Jy/beam
! Combined flux in latest and established models = 0.396272 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 25 components and 0.396272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.107212Jy  sigma=2.083411
! Fit after  self-cal, rms=0.105211Jy  sigma=2.037318
! Inverting map 
! Added new window around map position (-1, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0345407 Jy
! Component: 100  -  total flux cleaned = 0.0555383 Jy
! Total flux subtracted in 100 components = 0.0555383 Jy
! Clean residual min=-0.008619 max=0.016368 Jy/beam
! Clean residual mean=-0.000014 rms=0.002377 Jy/beam
! Combined flux in latest and established models = 0.451811 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.451811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.086682Jy  sigma=1.656906
! Fit after  self-cal, rms=0.086487Jy  sigma=1.653255
! Inverting map 
! Added new window around map position (15.4, 12).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172895 Jy
! Component: 100  -  total flux cleaned = 0.0296959 Jy
! Total flux subtracted in 100 components = 0.0296959 Jy
! Clean residual min=-0.007224 max=0.010281 Jy/beam
! Clean residual mean=-0.000011 rms=0.001887 Jy/beam
! Combined flux in latest and established models = 0.481507 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.481507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081072Jy  sigma=1.536121
! Fit after  self-cal, rms=0.080972Jy  sigma=1.534400
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8169 mas, bmaj=2.073 mas, bpa=-2.813 degrees
! Estimated noise=0.446011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157639 Jy
! Component: 100  -  total flux cleaned = 0.0263082 Jy
! Component: 150  -  total flux cleaned = 0.0340757 Jy
! Component: 200  -  total flux cleaned = 0.0398759 Jy
! Total flux subtracted in 200 components = 0.0398759 Jy
! Clean residual min=-0.006903 max=0.009174 Jy/beam
! Clean residual mean=-0.000018 rms=0.001564 Jy/beam
! Combined flux in latest and established models = 0.521383 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 62 components and 0.521383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077213Jy  sigma=1.451177
! Fit after  self-cal, rms=0.077135Jy  sigma=1.449925
! Inverting map 
! Added new window around map position (-10.2, 14.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00769448 Jy
! Component: 100  -  total flux cleaned = 0.0117167 Jy
! Component: 150  -  total flux cleaned = 0.0137951 Jy
! Component: 200  -  total flux cleaned = 0.0156779 Jy
! Total flux subtracted in 200 components = 0.0156779 Jy
! Clean residual min=-0.006183 max=0.007663 Jy/beam
! Clean residual mean=-0.000013 rms=0.001357 Jy/beam
! Combined flux in latest and established models = 0.53706 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 84 components and 0.537061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076153Jy  sigma=1.430674
! Fit after  self-cal, rms=0.076079Jy  sigma=1.428774
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8169 x 2.073 at -2.813 degrees (North through East)
! Clean map  min=-0.0056361  max=0.26446 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.07     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.98     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.07     KP        0.98     
!   LA        0.99     MK        0.96     NL        0.98     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.07     KP        0.96     
!   LA        0.98     MK        1.06     NL        0.98     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.07     KP        0.99     
!   LA        0.98     MK        1.01     NL        0.99     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.07     KP        0.98     
!   LA        0.99     MK        1.04     NL        1.01     OV        0.99     
!   PT        0.96     SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.09     KP        0.97     
!   LA        1.00     MK        0.94     NL        1.01     OV        1.01     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.07     KP        0.99     
!   LA        0.99     MK        0.93     NL        1.02     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076079Jy  sigma=1.428774
! Fit after  self-cal, rms=0.076086Jy  sigma=1.408258
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8154 mas, bmaj=2.064 mas, bpa=-2.532 degrees
! Estimated noise=0.444313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.37991e-05 Jy
! Component: 100  -  total flux cleaned = -0.000104679 Jy
! Component: 150  -  total flux cleaned = -0.000100124 Jy
! Component: 200  -  total flux cleaned = -2.59698e-05 Jy
! Total flux subtracted in 200 components = -2.59698e-05 Jy
! Clean residual min=-0.004151 max=0.004711 Jy/beam
! Clean residual mean=-0.000003 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.537035 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 97 components and 0.537035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075906Jy  sigma=1.404443
! Fit after  self-cal, rms=0.075914Jy  sigma=1.404242
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075914Jy  sigma=1.404242
! Fit after  self-cal, rms=0.075759Jy  sigma=1.381217
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8164 mas, bmaj=2.065 mas, bpa=-2.964 degrees
! Estimated noise=0.444072 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.89193e-05 Jy
! Component: 100  -  total flux cleaned = 8.44601e-05 Jy
! Component: 150  -  total flux cleaned = 0.000208902 Jy
! Component: 200  -  total flux cleaned = 0.000209504 Jy
! Total flux subtracted in 200 components = 0.000209504 Jy
! Clean residual min=-0.002580 max=0.003526 Jy/beam
! Clean residual mean=-0.000001 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.537244 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 113 components and 0.537244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075695Jy  sigma=1.379834
! Fit after  self-cal, rms=0.075705Jy  sigma=1.379699
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.4, 31.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00317252 Jy
! Component: 100  -  total flux cleaned = 0.00440496 Jy
! Component: 150  -  total flux cleaned = 0.00459497 Jy
! Component: 200  -  total flux cleaned = 0.00472165 Jy
! Total flux subtracted in 200 components = 0.00472165 Jy
! Clean residual min=-0.002538 max=0.003105 Jy/beam
! Clean residual mean=-0.000001 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.541965 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 133 components and 0.541966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075550Jy  sigma=1.376922
! Fit after  self-cal, rms=0.075543Jy  sigma=1.376764
! Inverting map 
! Added new window around map position (-24.8, -25.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00304043 Jy
! Component: 100  -  total flux cleaned = 0.0042599 Jy
! Component: 150  -  total flux cleaned = 0.00472407 Jy
! Component: 200  -  total flux cleaned = 0.00509572 Jy
! Total flux subtracted in 200 components = 0.00509572 Jy
! Clean residual min=-0.002349 max=0.002743 Jy/beam
! Clean residual mean=-0.000001 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.547061 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 151 components and 0.547061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075413Jy  sigma=1.374041
! Fit after  self-cal, rms=0.075402Jy  sigma=1.373849
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075402Jy  sigma=1.373849
! Fit after  self-cal, rms=0.075303Jy  sigma=1.373389
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8142 mas, bmaj=2.058 mas, bpa=-3.107 degrees
! Estimated noise=0.442448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474495 Jy
! Component: 100  -  total flux cleaned = 0.00089457 Jy
! Component: 150  -  total flux cleaned = 0.00104275 Jy
! Component: 200  -  total flux cleaned = 0.0012148 Jy
! Total flux subtracted in 200 components = 0.0012148 Jy
! Clean residual min=-0.002267 max=0.002512 Jy/beam
! Clean residual mean=-0.000001 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.548276 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 161 components and 0.548276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075259Jy  sigma=1.372545
! Fit after  self-cal, rms=0.075254Jy  sigma=1.372502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -42.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201998 Jy
! Component: 100  -  total flux cleaned = 0.00202142 Jy
! Component: 150  -  total flux cleaned = 0.00191904 Jy
! Component: 200  -  total flux cleaned = 0.0019629 Jy
! Total flux subtracted in 200 components = 0.0019629 Jy
! Clean residual min=-0.002264 max=0.002346 Jy/beam
! Clean residual mean=-0.000002 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.550239 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 178 components and 0.550239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075144Jy  sigma=1.370622
! Fit after  self-cal, rms=0.075141Jy  sigma=1.370525
! Inverting map 
! Added new window around map position (-13.6, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184841 Jy
! Component: 100  -  total flux cleaned = 0.00221684 Jy
! Component: 150  -  total flux cleaned = 0.0024673 Jy
! Component: 200  -  total flux cleaned = 0.00250661 Jy
! Total flux subtracted in 200 components = 0.00250661 Jy
! Clean residual min=-0.002236 max=0.002154 Jy/beam
! Clean residual mean=-0.000002 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.552746 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 186 components and 0.552746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075057Jy  sigma=1.369149
! Fit after  self-cal, rms=0.075051Jy  sigma=1.369079
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075051Jy  sigma=1.369079
! Fit after  self-cal, rms=0.074965Jy  sigma=1.368773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.157 mas, bmaj=4.533 mas, bpa=1.444 degrees
! Estimated noise=0.592509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000828037 Jy
! Component: 100  -  total flux cleaned = 0.00101539 Jy
! Component: 150  -  total flux cleaned = 0.00120669 Jy
! Component: 200  -  total flux cleaned = 0.00137693 Jy
! Total flux subtracted in 200 components = 0.00137693 Jy
! Clean residual min=-0.002535 max=0.001912 Jy/beam
! Clean residual mean=-0.000001 rms=0.000586 Jy/beam
! Combined flux in latest and established models = 0.554123 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 206 components and 0.554123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.074945Jy  sigma=1.368337
! Fit after  self-cal, rms=0.074942Jy  sigma=1.368286
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239459 Jy
! Component: 100  -  total flux cleaned = 0.000418428 Jy
! Component: 150  -  total flux cleaned = 0.000535953 Jy
! Component: 200  -  total flux cleaned = 0.000623182 Jy
! Total flux subtracted in 200 components = 0.000623182 Jy
! Clean residual min=-0.002452 max=0.001864 Jy/beam
! Clean residual mean=-0.000002 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.554746 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 215 components and 0.554746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.074931Jy  sigma=1.368115
! Fit after  self-cal, rms=0.074930Jy  sigma=1.368102
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8134 mas, bmaj=2.057 mas, bpa=-3.11 degrees
! Estimated noise=0.441915 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8134 x 2.057 at -3.11 degrees (North through East)
! Clean map  min=-0.0023335  max=0.26289 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6458 mas, bmaj=1.662 mas, bpa=-5.172 degrees
! Estimated noise=0.679692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207575 Jy
! Component: 100  -  total flux cleaned = 0.304022 Jy
! Component: 150  -  total flux cleaned = 0.36448 Jy
! Component: 200  -  total flux cleaned = 0.404894 Jy
! Total flux subtracted in 200 components = 0.404894 Jy
! Clean residual min=-0.010773 max=0.021998 Jy/beam
! Clean residual mean=-0.000017 rms=0.003095 Jy/beam
! Combined flux in latest and established models = 0.404894 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.404894 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8134 mas, bmaj=2.057 mas, bpa=-3.11 degrees
! Estimated noise=0.441915 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.041057 Jy
! Component: 100  -  total flux cleaned = 0.0655758 Jy
! Component: 150  -  total flux cleaned = 0.0821876 Jy
! Component: 200  -  total flux cleaned = 0.0936097 Jy
! Total flux subtracted in 200 components = 0.0936097 Jy
! Clean residual min=-0.004609 max=0.006362 Jy/beam
! Clean residual mean=-0.000009 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.498504 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 42 components and 0.498504 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0082572 Jy
! Component: 100  -  total flux cleaned = 0.0144175 Jy
! Component: 150  -  total flux cleaned = 0.019311 Jy
! Component: 200  -  total flux cleaned = 0.0234512 Jy
! Total flux subtracted in 200 components = 0.0234512 Jy
! Clean residual min=-0.003371 max=0.003412 Jy/beam
! Clean residual mean=-0.000004 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.521955 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 66 components and 0.521955 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.157 mas, bmaj=4.533 mas, bpa=1.444 degrees
! Estimated noise=0.592509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00542818 Jy
! Component: 100  -  total flux cleaned = 0.00933717 Jy
! Component: 150  -  total flux cleaned = 0.0124976 Jy
! Component: 200  -  total flux cleaned = 0.0151946 Jy
! Total flux subtracted in 200 components = 0.0151946 Jy
! Clean residual min=-0.003213 max=0.002707 Jy/beam
! Clean residual mean=-0.000004 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.53715 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233366 Jy
! Component: 100  -  total flux cleaned = 0.00436461 Jy
! Component: 150  -  total flux cleaned = 0.00614785 Jy
! Component: 200  -  total flux cleaned = 0.00771923 Jy
! Total flux subtracted in 200 components = 0.00771923 Jy
! Clean residual min=-0.002729 max=0.002190 Jy/beam
! Clean residual mean=-0.000004 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.544869 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 116 components and 0.544869 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8134 mas, bmaj=2.057 mas, bpa=-3.11 degrees
! Estimated noise=0.441915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100609 Jy
! Component: 100  -  total flux cleaned = 0.00206478 Jy
! Component: 150  -  total flux cleaned = 0.00275031 Jy
! Component: 200  -  total flux cleaned = 0.00326041 Jy
! Total flux subtracted in 200 components = 0.00326041 Jy
! Clean residual min=-0.002354 max=0.002332 Jy/beam
! Clean residual mean=-0.000002 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.548129 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 147 components and 0.548129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075142Jy  sigma=1.372497
! Fit after  self-cal, rms=0.075111Jy  sigma=1.372020
wmodel /scr/pima/bg219e_uvs/J1209-2032_X_map.mod
! Writing 147 model components to file: /scr/pima/bg219e_uvs/J1209-2032_X_map.mod
wobs /scr/pima/bg219e_uvs/J1209-2032_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1209-2032_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J1209-2032_X_map.win
! wwins: Wrote 9 windows to /scr/pima/bg219e_uvs/J1209-2032_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000136724 Jy
! Component: 100  -  total flux cleaned = -5.67549e-05 Jy
! Component: 150  -  total flux cleaned = -1.92397e-05 Jy
! Component: 200  -  total flux cleaned = -0.000163369 Jy
! Component: 250  -  total flux cleaned = -0.000232087 Jy
! Component: 300  -  total flux cleaned = -0.000402673 Jy
! Component: 350  -  total flux cleaned = -0.000469236 Jy
! Component: 400  -  total flux cleaned = -0.000566951 Jy
! Component: 450  -  total flux cleaned = -0.00078943 Jy
! Component: 500  -  total flux cleaned = -0.000788746 Jy
! Component: 550  -  total flux cleaned = -0.000758635 Jy
! Component: 600  -  total flux cleaned = -0.000909574 Jy
! Component: 650  -  total flux cleaned = -0.00087951 Jy
! Component: 700  -  total flux cleaned = -0.000880086 Jy
! Component: 750  -  total flux cleaned = -0.000881031 Jy
! Component: 800  -  total flux cleaned = -0.000909147 Jy
! Component: 850  -  total flux cleaned = -0.000937326 Jy
! Component: 900  -  total flux cleaned = -0.00107409 Jy
! Component: 950  -  total flux cleaned = -0.00115501 Jy
! Component: 1000  -  total flux cleaned = -0.00123427 Jy
! Component: 1050  -  total flux cleaned = -0.00126033 Jy
! Component: 1100  -  total flux cleaned = -0.00128571 Jy
! Component: 1150  -  total flux cleaned = -0.00133649 Jy
! Component: 1200  -  total flux cleaned = -0.00136155 Jy
! Component: 1250  -  total flux cleaned = -0.00138616 Jy
! Component: 1300  -  total flux cleaned = -0.00133765 Jy
! Component: 1350  -  total flux cleaned = -0.0014582 Jy
! Component: 1400  -  total flux cleaned = -0.00145809 Jy
! Component: 1450  -  total flux cleaned = -0.00148111 Jy
! Component: 1500  -  total flux cleaned = -0.00150423 Jy
! Component: 1550  -  total flux cleaned = -0.00157317 Jy
! Component: 1600  -  total flux cleaned = -0.00159554 Jy
! Component: 1650  -  total flux cleaned = -0.00159564 Jy
! Component: 1700  -  total flux cleaned = -0.00157314 Jy
! Component: 1750  -  total flux cleaned = -0.00163901 Jy
! Component: 1800  -  total flux cleaned = -0.0017256 Jy
! Component: 1850  -  total flux cleaned = -0.00168257 Jy
! Component: 1900  -  total flux cleaned = -0.00178883 Jy
! Component: 1950  -  total flux cleaned = -0.00187262 Jy
! Component: 2000  -  total flux cleaned = -0.0019346 Jy
! Component: 2050  -  total flux cleaned = -0.00193454 Jy
! Component: 2100  -  total flux cleaned = -0.00201604 Jy
! Component: 2150  -  total flux cleaned = -0.00209671 Jy
! Component: 2200  -  total flux cleaned = -0.00203692 Jy
! Component: 2250  -  total flux cleaned = -0.00201704 Jy
! Component: 2300  -  total flux cleaned = -0.00217322 Jy
! Component: 2350  -  total flux cleaned = -0.00225072 Jy
! Component: 2400  -  total flux cleaned = -0.00225056 Jy
! Component: 2450  -  total flux cleaned = -0.00225025 Jy
! Component: 2500  -  total flux cleaned = -0.00230637 Jy
! Component: 2550  -  total flux cleaned = -0.00245546 Jy
! Component: 2600  -  total flux cleaned = -0.00241893 Jy
! Component: 2650  -  total flux cleaned = -0.00249233 Jy
! Component: 2700  -  total flux cleaned = -0.00254685 Jy
! Component: 2750  -  total flux cleaned = -0.00263684 Jy
! Component: 2800  -  total flux cleaned = -0.0026011 Jy
! Component: 2850  -  total flux cleaned = -0.00270759 Jy
! Component: 2900  -  total flux cleaned = -0.00274251 Jy
! Component: 2950  -  total flux cleaned = -0.00279472 Jy
! Component: 3000  -  total flux cleaned = -0.00277756 Jy
! Component: 3050  -  total flux cleaned = -0.002812 Jy
! Component: 3100  -  total flux cleaned = -0.00281218 Jy
! Component: 3150  -  total flux cleaned = -0.00281202 Jy
! Component: 3200  -  total flux cleaned = -0.00284557 Jy
! Component: 3250  -  total flux cleaned = -0.00281216 Jy
! Component: 3300  -  total flux cleaned = -0.00282868 Jy
! Component: 3350  -  total flux cleaned = -0.00279598 Jy
! Component: 3400  -  total flux cleaned = -0.00281238 Jy
! Component: 3450  -  total flux cleaned = -0.00281239 Jy
! Component: 3500  -  total flux cleaned = -0.00281236 Jy
! Component: 3550  -  total flux cleaned = -0.00281231 Jy
! Component: 3600  -  total flux cleaned = -0.00276468 Jy
! Component: 3650  -  total flux cleaned = -0.00276472 Jy
! Component: 3700  -  total flux cleaned = -0.00271787 Jy
! Component: 3750  -  total flux cleaned = -0.00274891 Jy
! Component: 3800  -  total flux cleaned = -0.0027487 Jy
! Component: 3850  -  total flux cleaned = -0.00267232 Jy
! Component: 3900  -  total flux cleaned = -0.00270275 Jy
! Component: 3950  -  total flux cleaned = -0.00270281 Jy
! Component: 4000  -  total flux cleaned = -0.00265761 Jy
! Component: 4050  -  total flux cleaned = -0.0026127 Jy
! Total flux subtracted in 4096 components = -0.00261296 Jy
! Clean residual min=-0.000965 max=0.001021 Jy/beam
! Clean residual mean=-0.000000 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.545516 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 441 components and 0.545517 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1209-2032_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8134 x 2.057 at -3.11 degrees (North through East)
! Clean map  min=-0.0015405  max=0.26244 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1209-2032_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.262443 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000251338 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.287306 0.287306 0.574613 1.14923 2.29845 4.5969 9.19381 18.3876 36.7752 73.5504
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.262 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1044.18 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1209-2032_X_uvs.log closed on Thu Apr  7 09:07:50 2016