! Started logfile: /scr/pima/bg219e_uvs/J1159-2148_X_uvs.log on Thu Apr  7 09:07:26 2016
obs /scr/pima/bg219e_uvs/J1159-2148_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1159-2148_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.868254 visibilities/baseline/integration-bin.
! Found source: J1159-2148
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13128 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1159-2148_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.065066Jy  sigma=21.005556
! Fit after  self-cal, rms=0.641288Jy  sigma=12.615904
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6671 mas, bmaj=1.634 mas, bpa=-3.729 degrees
! Estimated noise=0.702397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.261448 Jy
! Component: 100  -  total flux cleaned = 0.34108 Jy
! Total flux subtracted in 100 components = 0.34108 Jy
! Clean residual min=-0.020859 max=0.042204 Jy/beam
! Clean residual mean=-0.000041 rms=0.004873 Jy/beam
! Combined flux in latest and established models = 0.34108 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.34108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.119978Jy  sigma=2.337188
! Fit after  self-cal, rms=0.119814Jy  sigma=2.335204
! Inverting map 
! Added new window around map position (-2.8, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0468328 Jy
! Component: 100  -  total flux cleaned = 0.0782276 Jy
! Total flux subtracted in 100 components = 0.0782276 Jy
! Clean residual min=-0.013685 max=0.018501 Jy/beam
! Clean residual mean=-0.000023 rms=0.003012 Jy/beam
! Combined flux in latest and established models = 0.419307 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.419307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.092003Jy  sigma=1.739278
! Fit after  self-cal, rms=0.091408Jy  sigma=1.728803
! Inverting map 
! Added new window around map position (-1, 3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0229244 Jy
! Component: 100  -  total flux cleaned = 0.0390766 Jy
! Total flux subtracted in 100 components = 0.0390766 Jy
! Clean residual min=-0.010962 max=0.012323 Jy/beam
! Clean residual mean=-0.000015 rms=0.002254 Jy/beam
! Combined flux in latest and established models = 0.458384 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 31 components and 0.458384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.082464Jy  sigma=1.525084
! Fit after  self-cal, rms=0.082237Jy  sigma=1.520959
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8169 mas, bmaj=2.04 mas, bpa=-2.351 degrees
! Estimated noise=0.458143 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204121 Jy
! Component: 100  -  total flux cleaned = 0.0334348 Jy
! Component: 150  -  total flux cleaned = 0.0426199 Jy
! Component: 200  -  total flux cleaned = 0.0492336 Jy
! Total flux subtracted in 200 components = 0.0492336 Jy
! Clean residual min=-0.006928 max=0.010158 Jy/beam
! Clean residual mean=-0.000018 rms=0.001812 Jy/beam
! Combined flux in latest and established models = 0.507618 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 64 components and 0.507618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076624Jy  sigma=1.385152
! Fit after  self-cal, rms=0.076366Jy  sigma=1.379484
! Inverting map 
! Added new window around map position (-10.4, 14.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00914334 Jy
! Component: 100  -  total flux cleaned = 0.0142762 Jy
! Component: 150  -  total flux cleaned = 0.0174286 Jy
! Component: 200  -  total flux cleaned = 0.0190173 Jy
! Total flux subtracted in 200 components = 0.0190173 Jy
! Clean residual min=-0.006021 max=0.009421 Jy/beam
! Clean residual mean=-0.000009 rms=0.001543 Jy/beam
! Combined flux in latest and established models = 0.526635 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 87 components and 0.526635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.074964Jy  sigma=1.355907
! Fit after  self-cal, rms=0.074840Jy  sigma=1.352690
! Inverting map 
! Added new window around map position (-7, 12.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00823895 Jy
! Component: 100  -  total flux cleaned = 0.012977 Jy
! Component: 150  -  total flux cleaned = 0.0147844 Jy
! Component: 200  -  total flux cleaned = 0.0158478 Jy
! Total flux subtracted in 200 components = 0.0158478 Jy
! Clean residual min=-0.005867 max=0.006497 Jy/beam
! Clean residual mean=-0.000007 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 0.542483 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 115 components and 0.542483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.073563Jy  sigma=1.333049
! Fit after  self-cal, rms=0.073507Jy  sigma=1.331422
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8169 x 2.04 at -2.351 degrees (North through East)
! Clean map  min=-0.0052488  max=0.35444 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.06     KP        0.96     
!   LA        0.99     MK        0.98     NL        1.05     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.06     KP        0.97     
!   LA        0.99     MK        0.99     NL        1.04     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.05     KP        0.96     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.09     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.05     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.05     KP        0.97     
!   LA        0.99     MK        1.02     NL        1.04     OV        0.98     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.02     KP        0.97     
!   LA        0.99     MK        1.07     NL        1.05     OV        0.98     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.08     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.04     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.073507Jy  sigma=1.331422
! Fit after  self-cal, rms=0.073013Jy  sigma=1.300174
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8202 mas, bmaj=2.04 mas, bpa=-1.96 degrees
! Estimated noise=0.459397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107343 Jy
! Component: 100  -  total flux cleaned = -0.00125844 Jy
! Component: 150  -  total flux cleaned = -0.00142613 Jy
! Component: 200  -  total flux cleaned = -0.00166156 Jy
! Total flux subtracted in 200 components = -0.00166156 Jy
! Clean residual min=-0.004229 max=0.004164 Jy/beam
! Clean residual mean=0.000001 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.540821 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 135 components and 0.540821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072771Jy  sigma=1.296470
! Fit after  self-cal, rms=0.072789Jy  sigma=1.296333
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072789Jy  sigma=1.296333
! Fit after  self-cal, rms=0.072863Jy  sigma=1.275016
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8222 mas, bmaj=2.045 mas, bpa=-2.167 degrees
! Estimated noise=0.46086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0017975 Jy
! Component: 100  -  total flux cleaned = -0.00241838 Jy
! Component: 150  -  total flux cleaned = -0.00295571 Jy
! Component: 200  -  total flux cleaned = -0.0033672 Jy
! Total flux subtracted in 200 components = -0.0033672 Jy
! Clean residual min=-0.003127 max=0.003364 Jy/beam
! Clean residual mean=-0.000001 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.537454 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 150 components and 0.537454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072732Jy  sigma=1.272116
! Fit after  self-cal, rms=0.072741Jy  sigma=1.271971
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (25.6, 32.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011404 Jy
! Component: 100  -  total flux cleaned = 0.000906213 Jy
! Component: 150  -  total flux cleaned = 0.00102981 Jy
! Component: 200  -  total flux cleaned = 0.00108337 Jy
! Total flux subtracted in 200 components = 0.00108337 Jy
! Clean residual min=-0.002900 max=0.002857 Jy/beam
! Clean residual mean=-0.000001 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.538537 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 163 components and 0.538537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072574Jy  sigma=1.268450
! Fit after  self-cal, rms=0.072569Jy  sigma=1.268357
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072569Jy  sigma=1.268357
! Fit after  self-cal, rms=0.072730Jy  sigma=1.267836
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8229 mas, bmaj=2.047 mas, bpa=-2.146 degrees
! Estimated noise=0.460534 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117924 Jy
! Component: 100  -  total flux cleaned = -0.00151449 Jy
! Component: 150  -  total flux cleaned = -0.00176286 Jy
! Component: 200  -  total flux cleaned = -0.0019008 Jy
! Total flux subtracted in 200 components = -0.0019008 Jy
! Clean residual min=-0.002797 max=0.002777 Jy/beam
! Clean residual mean=-0.000001 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.536636 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 173 components and 0.536636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072657Jy  sigma=1.266359
! Fit after  self-cal, rms=0.072656Jy  sigma=1.266304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.2, 33).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174277 Jy
! Component: 100  -  total flux cleaned = 0.002108 Jy
! Component: 150  -  total flux cleaned = 0.00224376 Jy
! Component: 200  -  total flux cleaned = 0.00220246 Jy
! Total flux subtracted in 200 components = 0.00220246 Jy
! Clean residual min=-0.002658 max=0.002406 Jy/beam
! Clean residual mean=-0.000001 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.538839 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 188 components and 0.538839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072547Jy  sigma=1.264472
! Fit after  self-cal, rms=0.072545Jy  sigma=1.264425
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072545Jy  sigma=1.264425
! Fit after  self-cal, rms=0.072644Jy  sigma=1.264195
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=4.639 mas, bpa=3.463 degrees
! Estimated noise=0.600211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00067572 Jy
! Component: 100  -  total flux cleaned = -0.000871177 Jy
! Component: 150  -  total flux cleaned = -0.00104693 Jy
! Component: 200  -  total flux cleaned = -0.00123935 Jy
! Total flux subtracted in 200 components = -0.00123935 Jy
! Clean residual min=-0.002664 max=0.002257 Jy/beam
! Clean residual mean=-0.000003 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.537599 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 210 components and 0.537599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072621Jy  sigma=1.263891
! Fit after  self-cal, rms=0.072618Jy  sigma=1.263832
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00044067 Jy
! Component: 100  -  total flux cleaned = -0.000608783 Jy
! Component: 150  -  total flux cleaned = -0.00073336 Jy
! Component: 200  -  total flux cleaned = -0.000878787 Jy
! Total flux subtracted in 200 components = -0.000878787 Jy
! Clean residual min=-0.002545 max=0.002182 Jy/beam
! Clean residual mean=-0.000003 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.53672 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 223 components and 0.536721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072609Jy  sigma=1.263749
! Fit after  self-cal, rms=0.072606Jy  sigma=1.263737
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8235 mas, bmaj=2.049 mas, bpa=-2.151 degrees
! Estimated noise=0.460267 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8235 x 2.049 at -2.151 degrees (North through East)
! Clean map  min=-0.0024248  max=0.3566 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6705 mas, bmaj=1.636 mas, bpa=-3.403 degrees
! Estimated noise=0.711621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.264691 Jy
! Component: 100  -  total flux cleaned = 0.348123 Jy
! Component: 150  -  total flux cleaned = 0.395643 Jy
! Component: 200  -  total flux cleaned = 0.427283 Jy
! Total flux subtracted in 200 components = 0.427283 Jy
! Clean residual min=-0.010415 max=0.017438 Jy/beam
! Clean residual mean=-0.000020 rms=0.002511 Jy/beam
! Combined flux in latest and established models = 0.427283 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.427283 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8235 mas, bmaj=2.049 mas, bpa=-2.151 degrees
! Estimated noise=0.460267 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0303071 Jy
! Component: 100  -  total flux cleaned = 0.0496793 Jy
! Component: 150  -  total flux cleaned = 0.06299 Jy
! Component: 200  -  total flux cleaned = 0.0723612 Jy
! Total flux subtracted in 200 components = 0.0723612 Jy
! Clean residual min=-0.004366 max=0.005814 Jy/beam
! Clean residual mean=-0.000013 rms=0.001147 Jy/beam
! Combined flux in latest and established models = 0.499644 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 60 components and 0.499644 Jy
! Inverting map 
! Added new window around map position (-1, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00697535 Jy
! Component: 100  -  total flux cleaned = 0.0122042 Jy
! Component: 150  -  total flux cleaned = 0.0155264 Jy
! Component: 200  -  total flux cleaned = 0.0183229 Jy
! Total flux subtracted in 200 components = 0.0183229 Jy
! Clean residual min=-0.003369 max=0.003264 Jy/beam
! Clean residual mean=-0.000005 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.517967 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 94 components and 0.517967 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=4.639 mas, bpa=3.463 degrees
! Estimated noise=0.600211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00436969 Jy
! Component: 100  -  total flux cleaned = 0.00734176 Jy
! Component: 150  -  total flux cleaned = 0.00967672 Jy
! Component: 200  -  total flux cleaned = 0.0111649 Jy
! Total flux subtracted in 200 components = 0.0111649 Jy
! Clean residual min=-0.002385 max=0.002712 Jy/beam
! Clean residual mean=-0.000003 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.529132 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114509 Jy
! Component: 100  -  total flux cleaned = 0.0018582 Jy
! Component: 150  -  total flux cleaned = 0.00249938 Jy
! Component: 200  -  total flux cleaned = 0.0031219 Jy
! Total flux subtracted in 200 components = 0.0031219 Jy
! Clean residual min=-0.002263 max=0.002336 Jy/beam
! Clean residual mean=-0.000003 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.532254 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 147 components and 0.532254 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8235 mas, bmaj=2.049 mas, bpa=-2.151 degrees
! Estimated noise=0.460267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000523373 Jy
! Component: 100  -  total flux cleaned = 0.000985154 Jy
! Component: 150  -  total flux cleaned = 0.00153791 Jy
! Component: 200  -  total flux cleaned = 0.00204594 Jy
! Total flux subtracted in 200 components = 0.00204594 Jy
! Clean residual min=-0.002532 max=0.002592 Jy/beam
! Clean residual mean=-0.000001 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.5343 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 167 components and 0.5343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072821Jy  sigma=1.266825
! Fit after  self-cal, rms=0.072787Jy  sigma=1.266325
wmodel /scr/pima/bg219e_uvs/J1159-2148_X_map.mod
! Writing 167 model components to file: /scr/pima/bg219e_uvs/J1159-2148_X_map.mod
wobs /scr/pima/bg219e_uvs/J1159-2148_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1159-2148_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J1159-2148_X_map.win
! wwins: Wrote 8 windows to /scr/pima/bg219e_uvs/J1159-2148_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132806 Jy
! Component: 100  -  total flux cleaned = -4.7819e-06 Jy
! Component: 150  -  total flux cleaned = -0.000126029 Jy
! Component: 200  -  total flux cleaned = -0.00032223 Jy
! Component: 250  -  total flux cleaned = -0.000474473 Jy
! Component: 300  -  total flux cleaned = -0.000474328 Jy
! Component: 350  -  total flux cleaned = -0.000438202 Jy
! Component: 400  -  total flux cleaned = -0.000509013 Jy
! Component: 450  -  total flux cleaned = -0.000509278 Jy
! Component: 500  -  total flux cleaned = -0.000677687 Jy
! Component: 550  -  total flux cleaned = -0.000577819 Jy
! Component: 600  -  total flux cleaned = -0.000545827 Jy
! Component: 650  -  total flux cleaned = -0.000545668 Jy
! Component: 700  -  total flux cleaned = -0.000451638 Jy
! Component: 750  -  total flux cleaned = -0.000359071 Jy
! Component: 800  -  total flux cleaned = -0.000328758 Jy
! Component: 850  -  total flux cleaned = -0.000119389 Jy
! Component: 900  -  total flux cleaned = -3.11969e-05 Jy
! Component: 950  -  total flux cleaned = -2.35757e-06 Jy
! Component: 1000  -  total flux cleaned = 0.000169574 Jy
! Component: 1050  -  total flux cleaned = 0.000254566 Jy
! Component: 1100  -  total flux cleaned = 0.000338521 Jy
! Component: 1150  -  total flux cleaned = 0.000448364 Jy
! Component: 1200  -  total flux cleaned = 0.000502227 Jy
! Component: 1250  -  total flux cleaned = 0.000556588 Jy
! Component: 1300  -  total flux cleaned = 0.000610115 Jy
! Component: 1350  -  total flux cleaned = 0.000793403 Jy
! Component: 1400  -  total flux cleaned = 0.000871067 Jy
! Component: 1450  -  total flux cleaned = 0.000998661 Jy
! Component: 1500  -  total flux cleaned = 0.00104916 Jy
! Component: 1550  -  total flux cleaned = 0.00114936 Jy
! Component: 1600  -  total flux cleaned = 0.00137175 Jy
! Component: 1650  -  total flux cleaned = 0.00137173 Jy
! Component: 1700  -  total flux cleaned = 0.00154079 Jy
! Component: 1750  -  total flux cleaned = 0.00156469 Jy
! Component: 1800  -  total flux cleaned = 0.00175363 Jy
! Component: 1850  -  total flux cleaned = 0.00175351 Jy
! Component: 1900  -  total flux cleaned = 0.00186965 Jy
! Component: 1950  -  total flux cleaned = 0.00205287 Jy
! Component: 2000  -  total flux cleaned = 0.00209859 Jy
! Component: 2050  -  total flux cleaned = 0.00223337 Jy
! Component: 2100  -  total flux cleaned = 0.00227769 Jy
! Component: 2150  -  total flux cleaned = 0.00236601 Jy
! Component: 2200  -  total flux cleaned = 0.0023877 Jy
! Component: 2250  -  total flux cleaned = 0.00251766 Jy
! Component: 2300  -  total flux cleaned = 0.00258198 Jy
! Component: 2350  -  total flux cleaned = 0.00262447 Jy
! Component: 2400  -  total flux cleaned = 0.00272991 Jy
! Component: 2450  -  total flux cleaned = 0.00283444 Jy
! Component: 2500  -  total flux cleaned = 0.00287572 Jy
! Component: 2550  -  total flux cleaned = 0.00291677 Jy
! Component: 2600  -  total flux cleaned = 0.00308008 Jy
! Component: 2650  -  total flux cleaned = 0.00312058 Jy
! Component: 2700  -  total flux cleaned = 0.00324122 Jy
! Component: 2750  -  total flux cleaned = 0.00330095 Jy
! Component: 2800  -  total flux cleaned = 0.00341961 Jy
! Component: 2850  -  total flux cleaned = 0.00341961 Jy
! Component: 2900  -  total flux cleaned = 0.00357554 Jy
! Component: 2950  -  total flux cleaned = 0.00361399 Jy
! Component: 3000  -  total flux cleaned = 0.00363305 Jy
! Component: 3050  -  total flux cleaned = 0.00363291 Jy
! Component: 3100  -  total flux cleaned = 0.0037088 Jy
! Component: 3150  -  total flux cleaned = 0.00376517 Jy
! Component: 3200  -  total flux cleaned = 0.00372787 Jy
! Component: 3250  -  total flux cleaned = 0.00387611 Jy
! Component: 3300  -  total flux cleaned = 0.00389423 Jy
! Component: 3350  -  total flux cleaned = 0.00385747 Jy
! Component: 3400  -  total flux cleaned = 0.0039483 Jy
! Component: 3450  -  total flux cleaned = 0.0039302 Jy
! Component: 3500  -  total flux cleaned = 0.00387659 Jy
! Component: 3550  -  total flux cleaned = 0.00393006 Jy
! Component: 3600  -  total flux cleaned = 0.00394752 Jy
! Component: 3650  -  total flux cleaned = 0.00396507 Jy
! Component: 3700  -  total flux cleaned = 0.00393015 Jy
! Component: 3750  -  total flux cleaned = 0.00398202 Jy
! Component: 3800  -  total flux cleaned = 0.00399915 Jy
! Component: 3850  -  total flux cleaned = 0.00398191 Jy
! Component: 3900  -  total flux cleaned = 0.00408398 Jy
! Component: 3950  -  total flux cleaned = 0.00403325 Jy
! Component: 4000  -  total flux cleaned = 0.00403335 Jy
! Component: 4050  -  total flux cleaned = 0.00405003 Jy
! Total flux subtracted in 4096 components = 0.00408343 Jy
! Clean residual min=-0.000963 max=0.000848 Jy/beam
! Clean residual mean=0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.538383 Jy
keep
! Adding 290 model components to the UV plane model.
! The established model now contains 457 components and 0.538384 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1159-2148_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8235 x 2.049 at -2.151 degrees (North through East)
! Clean map  min=-0.0021455  max=0.35858 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1159-2148_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.358577 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000282151 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.236059 0.236059 0.472118 0.944235 1.88847 3.77694 7.55388 15.1078 30.2155 60.431
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.358 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1270.87 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1159-2148_X_uvs.log closed on Thu Apr  7 09:07:31 2016