! Started logfile: /scr/pima/bg219e_uvs/J1155-3107_X_dfm.log on Thu May 19 18:37:23 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1155-3107_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1155-3107_X_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.717222 visibilities/baseline/integration-bin.
! Found source: J1155-3107
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15492 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1155-3107_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018543Jy  sigma=18.846489
! Fit after  self-cal, rms=0.834666Jy  sigma=15.306969
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.639 mas, bmaj=2.001 mas, bpa=-3.408 degrees
! Estimated noise=0.570991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13024 Jy
! Component: 100  -  total flux cleaned = 0.160214 Jy
! Total flux subtracted in 100 components = 0.160214 Jy
! Clean residual min=-0.005700 max=0.012352 Jy/beam
! Clean residual mean=-0.000003 rms=0.001549 Jy/beam
! Combined flux in latest and established models = 0.160214 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.160214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084133Jy  sigma=1.412444
! Fit after  self-cal, rms=0.084117Jy  sigma=1.412064
! Inverting map 
! Added new window around map position (0.8, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124648 Jy
! Component: 100  -  total flux cleaned = 0.0171874 Jy
! Total flux subtracted in 100 components = 0.0171874 Jy
! Clean residual min=-0.005288 max=0.007577 Jy/beam
! Clean residual mean=-0.000002 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.177401 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.177401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082427Jy  sigma=1.368409
! Fit after  self-cal, rms=0.082380Jy  sigma=1.366807
! Inverting map 
! Added new window around map position (-1.2, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.006873 Jy
! Component: 100  -  total flux cleaned = 0.00852408 Jy
! Total flux subtracted in 100 components = 0.00852408 Jy
! Clean residual min=-0.004802 max=0.007205 Jy/beam
! Clean residual mean=-0.000002 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.185925 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.185925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081769Jy  sigma=1.356108
! Fit after  self-cal, rms=0.081739Jy  sigma=1.354690
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8374 mas, bmaj=2.476 mas, bpa=-1.985 degrees
! Estimated noise=0.316697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00516697 Jy
! Component: 100  -  total flux cleaned = 0.00618554 Jy
! Component: 150  -  total flux cleaned = 0.00657573 Jy
! Component: 200  -  total flux cleaned = 0.00665679 Jy
! Total flux subtracted in 200 components = 0.00665679 Jy
! Clean residual min=-0.003048 max=0.003041 Jy/beam
! Clean residual mean=-0.000001 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.192582 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.192582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081292Jy  sigma=1.347666
! Fit after  self-cal, rms=0.081303Jy  sigma=1.347517
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8374 x 2.476 at -1.985 degrees (North through East)
! Clean map  min=-0.0028622  max=0.16278 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.06     KP        0.97     
!   LA        1.01     MK        0.97     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.08     KP        1.00     
!   LA        1.01     MK        0.94     NL        1.07     OV        0.99     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.11     KP        0.97     
!   LA        0.99     MK        0.98     NL        1.04     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        1.17     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.04     OV        0.95     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.09     KP        0.99     
!   LA        1.02     MK        0.99     NL        1.08     OV        0.99     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.04     KP        0.97     
!   LA        1.04     MK        1.02     NL        1.01     OV        0.95     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.17     KP        1.00     
!   LA        0.99     MK        1.06     NL        1.01     OV        0.99     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.04     KP        0.97     
!   LA        1.00     MK        1.01     NL        1.09     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.07     KP        1.01     
!   LA        1.00     MK        0.98     NL        1.05     OV        0.95     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.09     KP        0.98     
!   LA        1.02     MK        1.03     NL        1.03     OV        0.95     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.03     OV        0.99     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        1.08     KP        1.03     
!   LA        0.97     MK        1.04     NL        0.99     OV        1.00     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.081303Jy  sigma=1.347517
! Fit after  self-cal, rms=0.083599Jy  sigma=1.340447
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8362 mas, bmaj=2.471 mas, bpa=-1.609 degrees
! Estimated noise=0.31804 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00213097 Jy
! Component: 100  -  total flux cleaned = -0.0024917 Jy
! Component: 150  -  total flux cleaned = -0.00259212 Jy
! Component: 200  -  total flux cleaned = -0.00272818 Jy
! Total flux subtracted in 200 components = -0.00272818 Jy
! Clean residual min=-0.002304 max=0.002494 Jy/beam
! Clean residual mean=-0.000003 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.189854 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.189854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083498Jy  sigma=1.339022
! Fit after  self-cal, rms=0.083534Jy  sigma=1.338881
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083534Jy  sigma=1.338881
! Fit after  self-cal, rms=0.083964Jy  sigma=1.336198
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8381 mas, bmaj=2.475 mas, bpa=-1.556 degrees
! Estimated noise=0.317852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119757 Jy
! Component: 100  -  total flux cleaned = -0.00126733 Jy
! Component: 150  -  total flux cleaned = -0.00126836 Jy
! Component: 200  -  total flux cleaned = -0.00126903 Jy
! Total flux subtracted in 200 components = -0.00126903 Jy
! Clean residual min=-0.002157 max=0.001946 Jy/beam
! Clean residual mean=-0.000003 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.188585 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 59 components and 0.188585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083929Jy  sigma=1.335648
! Fit after  self-cal, rms=0.083932Jy  sigma=1.335585
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000198291 Jy
! Component: 100  -  total flux cleaned = -0.000197997 Jy
! Component: 150  -  total flux cleaned = -0.000151696 Jy
! Component: 200  -  total flux cleaned = -0.000130459 Jy
! Total flux subtracted in 200 components = -0.000130459 Jy
! Clean residual min=-0.002117 max=0.001915 Jy/beam
! Clean residual mean=-0.000003 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.188454 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 64 components and 0.188454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083917Jy  sigma=1.335364
! Fit after  self-cal, rms=0.083913Jy  sigma=1.335353
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083913Jy  sigma=1.335353
! Fit after  self-cal, rms=0.084469Jy  sigma=1.334692
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8387 mas, bmaj=2.475 mas, bpa=-1.5 degrees
! Estimated noise=0.317593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000502138 Jy
! Component: 100  -  total flux cleaned = -0.000526905 Jy
! Component: 150  -  total flux cleaned = -0.000482927 Jy
! Component: 200  -  total flux cleaned = -0.000463101 Jy
! Total flux subtracted in 200 components = -0.000463101 Jy
! Clean residual min=-0.001979 max=0.001829 Jy/beam
! Clean residual mean=-0.000002 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.187991 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 74 components and 0.187991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084454Jy  sigma=1.334439
! Fit after  self-cal, rms=0.084460Jy  sigma=1.334417
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.7279e-05 Jy
! Component: 100  -  total flux cleaned = -7.9e-06 Jy
! Component: 150  -  total flux cleaned = 2.76507e-05 Jy
! Component: 200  -  total flux cleaned = 4.44905e-05 Jy
! Total flux subtracted in 200 components = 4.44905e-05 Jy
! Clean residual min=-0.001958 max=0.001816 Jy/beam
! Clean residual mean=-0.000002 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.188036 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.188036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084451Jy  sigma=1.334282
! Fit after  self-cal, rms=0.084449Jy  sigma=1.334272
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084449Jy  sigma=1.334272
! Fit after  self-cal, rms=0.084609Jy  sigma=1.334229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.296 mas, bmaj=6.221 mas, bpa=-1.164 degrees
! Estimated noise=0.398671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.02096e-05 Jy
! Component: 100  -  total flux cleaned = 1.39237e-05 Jy
! Component: 150  -  total flux cleaned = 1.51644e-05 Jy
! Component: 200  -  total flux cleaned = 1.59724e-05 Jy
! Total flux subtracted in 200 components = 1.59724e-05 Jy
! Clean residual min=-0.002053 max=0.002006 Jy/beam
! Clean residual mean=-0.000004 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.188052 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 83 components and 0.188052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084608Jy  sigma=1.334124
! Fit after  self-cal, rms=0.084610Jy  sigma=1.334108
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.76506e-05 Jy
! Component: 100  -  total flux cleaned = 2.82468e-05 Jy
! Component: 150  -  total flux cleaned = 1.54026e-05 Jy
! Component: 200  -  total flux cleaned = 3.50705e-06 Jy
! Total flux subtracted in 200 components = 3.50705e-06 Jy
! Clean residual min=-0.002022 max=0.001976 Jy/beam
! Clean residual mean=-0.000004 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.188055 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 90 components and 0.188055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084611Jy  sigma=1.334066
! Fit after  self-cal, rms=0.084608Jy  sigma=1.334058
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8388 mas, bmaj=2.475 mas, bpa=-1.476 degrees
! Estimated noise=0.317326 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8388 x 2.475 at -1.476 degrees (North through East)
! Clean map  min=-0.0035105  max=0.16391 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6397 mas, bmaj=1.994 mas, bpa=-2.857 degrees
! Estimated noise=0.57494 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130958 Jy
! Component: 100  -  total flux cleaned = 0.160663 Jy
! Component: 150  -  total flux cleaned = 0.172168 Jy
! Component: 200  -  total flux cleaned = 0.17877 Jy
! Total flux subtracted in 200 components = 0.17877 Jy
! Clean residual min=-0.003519 max=0.003498 Jy/beam
! Clean residual mean=-0.000001 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.17877 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.17877 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8388 mas, bmaj=2.475 mas, bpa=-1.476 degrees
! Estimated noise=0.317326 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00475099 Jy
! Component: 100  -  total flux cleaned = 0.00734217 Jy
! Component: 150  -  total flux cleaned = 0.00809016 Jy
! Component: 200  -  total flux cleaned = 0.0085607 Jy
! Total flux subtracted in 200 components = 0.0085607 Jy
! Clean residual min=-0.002228 max=0.001890 Jy/beam
! Clean residual mean=-0.000002 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.187331 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.187331 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.296 mas, bmaj=6.221 mas, bpa=-1.164 degrees
! Estimated noise=0.398671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000678301 Jy
! Component: 100  -  total flux cleaned = 0.000730762 Jy
! Component: 150  -  total flux cleaned = 0.000753399 Jy
! Component: 200  -  total flux cleaned = 0.000732778 Jy
! Total flux subtracted in 200 components = 0.000732778 Jy
! Clean residual min=-0.002046 max=0.002113 Jy/beam
! Clean residual mean=-0.000004 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.188064 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.91858e-05 Jy
! Component: 100  -  total flux cleaned = 3.82172e-05 Jy
! Component: 150  -  total flux cleaned = 3.76162e-05 Jy
! Component: 200  -  total flux cleaned = 3.70794e-05 Jy
! Total flux subtracted in 200 components = 3.70794e-05 Jy
! Clean residual min=-0.002037 max=0.002078 Jy/beam
! Clean residual mean=-0.000004 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.188101 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 49 components and 0.188101 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8388 mas, bmaj=2.475 mas, bpa=-1.476 degrees
! Estimated noise=0.317326 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105617 Jy
! Component: 100  -  total flux cleaned = -0.000227439 Jy
! Component: 150  -  total flux cleaned = -0.000298754 Jy
! Component: 200  -  total flux cleaned = -0.000330554 Jy
! Total flux subtracted in 200 components = -0.000330554 Jy
! Clean residual min=-0.001863 max=0.001790 Jy/beam
! Clean residual mean=-0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.18777 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 60 components and 0.18777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084639Jy  sigma=1.334120
! Fit after  self-cal, rms=0.084616Jy  sigma=1.333944
wmodel /J1155-3107_X_map.mod
! wmodel: Unable to open new model file: /J1155-3107_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1155-3107_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8388 x 2.475 at -1.476 degrees (North through East)
! Clean map  min=-0.0017345  max=0.16473 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1155-3107_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.164734 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000462858 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.842921 0.842921 1.68584 3.37168 6.74337 13.4867 26.9735 53.9469
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.164 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  355.905 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1155-3107_X_dfm.log closed on Thu May 19 18:37:26 2016