! Started logfile: /scr/pima/bg219e_uvs/J1154-3242_S_uvs.log on Thu Apr 7 06:43:12 2016 obs /scr/pima/bg219e_uvs/J1154-3242_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1154-3242_S_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.703704 visibilities/baseline/integration-bin. ! Found source: J1154-3242 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 6080 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1154-3242_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011836Jy sigma=15.271943 ! Fit after self-cal, rms=0.871346Jy sigma=13.059930 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.645 mas, bmaj=7.869 mas, bpa=-2.635 degrees ! Estimated noise=0.89873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0957549 Jy ! Component: 100 - total flux cleaned = 0.12309 Jy ! Total flux subtracted in 100 components = 0.12309 Jy ! Clean residual min=-0.007143 max=0.012614 Jy/beam ! Clean residual mean=0.000040 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.12309 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.12309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098172Jy sigma=1.406074 ! Fit after self-cal, rms=0.098117Jy sigma=1.405335 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149631 Jy ! Component: 100 - total flux cleaned = 0.0244794 Jy ! Total flux subtracted in 100 components = 0.0244794 Jy ! Clean residual min=-0.005901 max=0.007848 Jy/beam ! Clean residual mean=0.000026 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.147569 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.147569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094529Jy sigma=1.331605 ! Fit after self-cal, rms=0.094501Jy sigma=1.331108 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=9.602 mas, bpa=-1.801 degrees ! Estimated noise=0.619452 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129077 Jy ! Component: 100 - total flux cleaned = 0.0201127 Jy ! Component: 150 - total flux cleaned = 0.0244456 Jy ! Component: 200 - total flux cleaned = 0.0263357 Jy ! Total flux subtracted in 200 components = 0.0263357 Jy ! Clean residual min=-0.004017 max=0.005631 Jy/beam ! Clean residual mean=0.000026 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.173905 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 81 components and 0.173905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092949Jy sigma=1.298828 ! Fit after self-cal, rms=0.092892Jy sigma=1.297516 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 9.602 at -1.801 degrees (North through East) ! Clean map min=-0.0042212 max=0.12593 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.16 KP 0.97 ! LA 0.99 MK 0.99 NL 1.03 OV 1.00 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.88 HN 1.10 KP 0.99 ! LA 1.02 MK 1.02 NL 1.08 OV 0.96 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 1.14 KP 0.96 ! LA 1.05 MK 1.02 NL 1.02 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Fit before self-cal, rms=0.092892Jy sigma=1.297516 ! Fit after self-cal, rms=0.095593Jy sigma=1.291406 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=9.629 mas, bpa=-1.749 degrees ! Estimated noise=0.622165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565707 Jy ! Component: 100 - total flux cleaned = 0.000816551 Jy ! Component: 150 - total flux cleaned = 0.000967034 Jy ! Component: 200 - total flux cleaned = 0.00100887 Jy ! Total flux subtracted in 200 components = 0.00100887 Jy ! Clean residual min=-0.003781 max=0.004023 Jy/beam ! Clean residual mean=0.000011 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.174914 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.174914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095520Jy sigma=1.290419 ! Fit after self-cal, rms=0.095586Jy sigma=1.290173 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095586Jy sigma=1.290173 ! Fit after self-cal, rms=0.096586Jy sigma=1.287546 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=9.613 mas, bpa=-1.771 degrees ! Estimated noise=0.623449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.11194e-05 Jy ! Component: 100 - total flux cleaned = -7.64687e-06 Jy ! Component: 150 - total flux cleaned = -3.18538e-05 Jy ! Component: 200 - total flux cleaned = -5.40266e-05 Jy ! Total flux subtracted in 200 components = -5.40266e-05 Jy ! Clean residual min=-0.003640 max=0.003600 Jy/beam ! Clean residual mean=0.000004 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.17486 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.17486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096571Jy sigma=1.287329 ! Fit after self-cal, rms=0.096600Jy sigma=1.287242 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52.5, 51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245218 Jy ! Component: 100 - total flux cleaned = 0.00226327 Jy ! Component: 150 - total flux cleaned = 0.00204514 Jy ! Component: 200 - total flux cleaned = 0.00185908 Jy ! Total flux subtracted in 200 components = 0.00185908 Jy ! Clean residual min=-0.003409 max=0.002833 Jy/beam ! Clean residual mean=0.000006 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.176719 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 128 components and 0.176719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096473Jy sigma=1.285669 ! Fit after self-cal, rms=0.096472Jy sigma=1.285518 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096472Jy sigma=1.285518 ! Fit after self-cal, rms=0.096674Jy sigma=1.285218 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=9.593 mas, bpa=-1.857 degrees ! Estimated noise=0.622833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000531833 Jy ! Component: 100 - total flux cleaned = 0.000491932 Jy ! Component: 150 - total flux cleaned = 0.000382149 Jy ! Component: 200 - total flux cleaned = 0.000382201 Jy ! Total flux subtracted in 200 components = 0.000382201 Jy ! Clean residual min=-0.003389 max=0.002763 Jy/beam ! Clean residual mean=0.000004 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.177101 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 143 components and 0.177101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096640Jy sigma=1.284757 ! Fit after self-cal, rms=0.096652Jy sigma=1.284724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183247 Jy ! Component: 100 - total flux cleaned = 0.000183288 Jy ! Component: 150 - total flux cleaned = 0.000183896 Jy ! Component: 200 - total flux cleaned = 0.000183576 Jy ! Total flux subtracted in 200 components = 0.000183576 Jy ! Clean residual min=-0.003399 max=0.002742 Jy/beam ! Clean residual mean=0.000004 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.177285 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 155 components and 0.177285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096636Jy sigma=1.284497 ! Fit after self-cal, rms=0.096638Jy sigma=1.284490 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096638Jy sigma=1.284490 ! Fit after self-cal, rms=0.096669Jy sigma=1.284471 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.822 mas, bmaj=21.57 mas, bpa=-1.994 degrees ! Estimated noise=0.760152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054332 Jy ! Component: 100 - total flux cleaned = 0.000845241 Jy ! Component: 150 - total flux cleaned = 0.00108792 Jy ! Component: 200 - total flux cleaned = 0.0011555 Jy ! Total flux subtracted in 200 components = 0.0011555 Jy ! Clean residual min=-0.002550 max=0.003372 Jy/beam ! Clean residual mean=0.000006 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.17844 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 171 components and 0.17844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096666Jy sigma=1.284466 ! Fit after self-cal, rms=0.096667Jy sigma=1.284439 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174306 Jy ! Component: 100 - total flux cleaned = 0.000241487 Jy ! Component: 150 - total flux cleaned = 0.000282801 Jy ! Component: 200 - total flux cleaned = 0.00030228 Jy ! Total flux subtracted in 200 components = 0.00030228 Jy ! Clean residual min=-0.002519 max=0.003322 Jy/beam ! Clean residual mean=0.000006 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.178743 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 177 components and 0.178742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096665Jy sigma=1.284450 ! Fit after self-cal, rms=0.096665Jy sigma=1.284441 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=9.588 mas, bpa=-1.857 degrees ! Estimated noise=0.622999 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 9.588 at -1.857 degrees (North through East) ! Clean map min=-0.0033004 max=0.12537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=7.823 mas, bpa=-2.668 degrees ! Estimated noise=0.913998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0969558 Jy ! Component: 100 - total flux cleaned = 0.125221 Jy ! Component: 150 - total flux cleaned = 0.140393 Jy ! Component: 200 - total flux cleaned = 0.14996 Jy ! Total flux subtracted in 200 components = 0.14996 Jy ! Clean residual min=-0.004985 max=0.006357 Jy/beam ! Clean residual mean=0.000017 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.14996 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.14996 Jy ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=9.588 mas, bpa=-1.857 degrees ! Estimated noise=0.622999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010939 Jy ! Component: 100 - total flux cleaned = 0.0170384 Jy ! Component: 150 - total flux cleaned = 0.0212399 Jy ! Component: 200 - total flux cleaned = 0.0241324 Jy ! Total flux subtracted in 200 components = 0.0241324 Jy ! Clean residual min=-0.003318 max=0.003246 Jy/beam ! Clean residual mean=0.000010 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.174092 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 74 components and 0.174092 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.822 mas, bmaj=21.57 mas, bpa=-1.994 degrees ! Estimated noise=0.760152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337196 Jy ! Component: 100 - total flux cleaned = 0.0048433 Jy ! Component: 150 - total flux cleaned = 0.00489527 Jy ! Component: 200 - total flux cleaned = 0.00484489 Jy ! Total flux subtracted in 200 components = 0.00484489 Jy ! Clean residual min=-0.002871 max=0.003398 Jy/beam ! Clean residual mean=0.000012 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.178937 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.60402e-05 Jy ! Component: 100 - total flux cleaned = -0.000165072 Jy ! Component: 150 - total flux cleaned = -0.000236459 Jy ! Component: 200 - total flux cleaned = -0.00030106 Jy ! Total flux subtracted in 200 components = -0.00030106 Jy ! Clean residual min=-0.002686 max=0.003394 Jy/beam ! Clean residual mean=0.000010 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.178636 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 102 components and 0.178636 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=9.588 mas, bpa=-1.857 degrees ! Estimated noise=0.622999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000550203 Jy ! Component: 100 - total flux cleaned = -0.000863306 Jy ! Component: 150 - total flux cleaned = -0.00102864 Jy ! Component: 200 - total flux cleaned = -0.00107832 Jy ! Total flux subtracted in 200 components = -0.00107832 Jy ! Clean residual min=-0.003224 max=0.002820 Jy/beam ! Clean residual mean=0.000005 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.177558 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 0.177558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096722Jy sigma=1.285377 ! Fit after self-cal, rms=0.096702Jy sigma=1.285138 wmodel /scr/pima/bg219e_uvs/J1154-3242_S_map.mod ! Writing 126 model components to file: /scr/pima/bg219e_uvs/J1154-3242_S_map.mod wobs /scr/pima/bg219e_uvs/J1154-3242_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1154-3242_S_uvs.fits wwins /scr/pima/bg219e_uvs/J1154-3242_S_map.win ! wwins: Wrote 3 windows to /scr/pima/bg219e_uvs/J1154-3242_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350283 Jy ! Component: 100 - total flux cleaned = -1.3699e-05 Jy ! Component: 150 - total flux cleaned = 0.000259372 Jy ! Component: 200 - total flux cleaned = 0.000345926 Jy ! Component: 250 - total flux cleaned = 0.000345695 Jy ! Component: 300 - total flux cleaned = 0.00042824 Jy ! Component: 350 - total flux cleaned = 0.000508139 Jy ! Component: 400 - total flux cleaned = 0.00054558 Jy ! Component: 450 - total flux cleaned = 0.000468979 Jy ! Component: 500 - total flux cleaned = 0.000357945 Jy ! Component: 550 - total flux cleaned = 0.000285652 Jy ! Component: 600 - total flux cleaned = 0.00032176 Jy ! Component: 650 - total flux cleaned = 0.000285761 Jy ! Component: 700 - total flux cleaned = 0.000285133 Jy ! Component: 750 - total flux cleaned = 0.000114433 Jy ! Component: 800 - total flux cleaned = 8.05291e-05 Jy ! Component: 850 - total flux cleaned = 4.7341e-05 Jy ! Component: 900 - total flux cleaned = -8.23154e-05 Jy ! Component: 950 - total flux cleaned = -4.97961e-05 Jy ! Component: 1000 - total flux cleaned = -0.000112992 Jy ! Component: 1050 - total flux cleaned = -0.000144258 Jy ! Component: 1100 - total flux cleaned = -0.000206048 Jy ! Component: 1150 - total flux cleaned = -0.000175578 Jy ! Component: 1200 - total flux cleaned = -0.000115879 Jy ! Component: 1250 - total flux cleaned = -5.74461e-05 Jy ! Component: 1300 - total flux cleaned = -0.000115515 Jy ! Component: 1350 - total flux cleaned = 2.76631e-05 Jy ! Component: 1400 - total flux cleaned = -1.06904e-06 Jy ! Component: 1450 - total flux cleaned = -0.000113527 Jy ! Component: 1500 - total flux cleaned = -0.00016798 Jy ! Component: 1550 - total flux cleaned = -0.000195294 Jy ! Component: 1600 - total flux cleaned = -0.000222383 Jy ! Component: 1650 - total flux cleaned = -0.000249626 Jy ! Component: 1700 - total flux cleaned = -0.000408079 Jy ! Component: 1750 - total flux cleaned = -0.000460225 Jy ! Component: 1800 - total flux cleaned = -0.000512103 Jy ! Component: 1850 - total flux cleaned = -0.000512375 Jy ! Component: 1900 - total flux cleaned = -0.000639346 Jy ! Component: 1950 - total flux cleaned = -0.000689446 Jy ! Component: 2000 - total flux cleaned = -0.000788856 Jy ! Component: 2050 - total flux cleaned = -0.000689929 Jy ! Component: 2100 - total flux cleaned = -0.000763747 Jy ! Component: 2150 - total flux cleaned = -0.00078792 Jy ! Component: 2200 - total flux cleaned = -0.000811741 Jy ! Component: 2250 - total flux cleaned = -0.00083566 Jy ! Component: 2300 - total flux cleaned = -0.000859438 Jy ! Component: 2350 - total flux cleaned = -0.000835866 Jy ! Component: 2400 - total flux cleaned = -0.000812897 Jy ! Component: 2450 - total flux cleaned = -0.000835934 Jy ! Component: 2500 - total flux cleaned = -0.00088158 Jy ! Component: 2550 - total flux cleaned = -0.000927105 Jy ! Component: 2600 - total flux cleaned = -0.000949709 Jy ! Component: 2650 - total flux cleaned = -0.000994248 Jy ! Component: 2700 - total flux cleaned = -0.000971893 Jy ! Component: 2750 - total flux cleaned = -0.000883588 Jy ! Component: 2800 - total flux cleaned = -0.000927264 Jy ! Component: 2850 - total flux cleaned = -0.00094895 Jy ! Component: 2900 - total flux cleaned = -0.000927328 Jy ! Component: 2950 - total flux cleaned = -0.000884548 Jy ! Component: 3000 - total flux cleaned = -0.00088475 Jy ! Component: 3050 - total flux cleaned = -0.000948224 Jy ! Component: 3100 - total flux cleaned = -0.000927206 Jy ! Component: 3150 - total flux cleaned = -0.000906292 Jy ! Component: 3200 - total flux cleaned = -0.000906112 Jy ! Component: 3250 - total flux cleaned = -0.000865087 Jy ! Component: 3300 - total flux cleaned = -0.000885684 Jy ! Component: 3350 - total flux cleaned = -0.000885813 Jy ! Component: 3400 - total flux cleaned = -0.000845595 Jy ! Component: 3450 - total flux cleaned = -0.000865578 Jy ! Component: 3500 - total flux cleaned = -0.000826066 Jy ! Component: 3550 - total flux cleaned = -0.000767138 Jy ! Component: 3600 - total flux cleaned = -0.000826095 Jy ! Component: 3650 - total flux cleaned = -0.000884554 Jy ! Component: 3700 - total flux cleaned = -0.000787472 Jy ! Component: 3750 - total flux cleaned = -0.000787505 Jy ! Component: 3800 - total flux cleaned = -0.000710891 Jy ! Component: 3850 - total flux cleaned = -0.000729825 Jy ! Component: 3900 - total flux cleaned = -0.000654038 Jy ! Component: 3950 - total flux cleaned = -0.000635216 Jy ! Component: 4000 - total flux cleaned = -0.000541721 Jy ! Component: 4050 - total flux cleaned = -0.00048578 Jy ! Total flux subtracted in 4096 components = -0.000504279 Jy ! Clean residual min=-0.001117 max=0.000989 Jy/beam ! Clean residual mean=0.000005 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.177054 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 453 components and 0.177054 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1154-3242_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.272 x 9.588 at -1.857 degrees (North through East) ! Clean map min=-0.0033524 max=0.12753 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1154-3242_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127529 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00035034 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.824145 0.824145 1.64829 3.29658 6.59316 13.1863 26.3727 52.7453 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.127 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 364.013 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1154-3242_S_uvs.log closed on Thu Apr 7 06:43:16 2016