! Started logfile: /scr/pima/bg219e_uvs/J1147-3812_S_uvs.log on Thu Apr  7 06:43:08 2016
obs /scr/pima/bg219e_uvs/J1147-3812_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1147-3812_S_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.738095 visibilities/baseline/integration-bin.
! Found source: J1147-3812
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1488 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1147-3812_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.669438Jy  sigma=17.731515
! Fit after  self-cal, rms=0.425460Jy  sigma=4.381610
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.523 mas, bmaj=8.282 mas, bpa=-3.499 degrees
! Estimated noise=3.41071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.916584 Jy
! Component: 100  -  total flux cleaned = 1.14157 Jy
! Total flux subtracted in 100 components = 1.14157 Jy
! Clean residual min=-0.074892 max=0.147060 Jy/beam
! Clean residual mean=0.000803 rms=0.021200 Jy/beam
! Combined flux in latest and established models = 1.14157 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 1.14157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.362027Jy  sigma=3.553361
! Fit after  self-cal, rms=0.361968Jy  sigma=3.553283
! Inverting map 
! Added new window around map position (-4.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13774 Jy
! Component: 100  -  total flux cleaned = 0.212526 Jy
! Total flux subtracted in 100 components = 0.212526 Jy
! Clean residual min=-0.072319 max=0.128729 Jy/beam
! Clean residual mean=0.000392 rms=0.016449 Jy/beam
! Combined flux in latest and established models = 1.3541 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 16 components and 1.3541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.283316Jy  sigma=2.580594
! Fit after  self-cal, rms=0.277379Jy  sigma=2.490952
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.04 mas, bmaj=9.905 mas, bpa=-3.277 degrees
! Estimated noise=2.75068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124528 Jy
! Component: 100  -  total flux cleaned = 0.19183 Jy
! Component: 150  -  total flux cleaned = 0.230586 Jy
! Component: 200  -  total flux cleaned = 0.236107 Jy
! Total flux subtracted in 200 components = 0.236107 Jy
! Clean residual min=-0.051520 max=0.040841 Jy/beam
! Clean residual mean=-0.000101 rms=0.011745 Jy/beam
! Combined flux in latest and established models = 1.5902 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 51 components and 1.5902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210864Jy  sigma=1.773976
! Fit after  self-cal, rms=0.209845Jy  sigma=1.766762
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.04 x 9.905 at -3.277 degrees (North through East)
! Clean map  min=-0.050669  max=1.0475 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.209845Jy  sigma=1.766762
! Fit after  self-cal, rms=0.211372Jy  sigma=1.777122
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.011 mas, bmaj=9.814 mas, bpa=-3.267 degrees
! Estimated noise=2.77863 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102075 Jy
! Component: 100  -  total flux cleaned = 0.0111288 Jy
! Component: 150  -  total flux cleaned = 0.0128076 Jy
! Component: 200  -  total flux cleaned = 0.0144116 Jy
! Total flux subtracted in 200 components = 0.0144116 Jy
! Clean residual min=-0.048960 max=0.039269 Jy/beam
! Clean residual mean=-0.000131 rms=0.011301 Jy/beam
! Combined flux in latest and established models = 1.60461 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 64 components and 1.60461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201707Jy  sigma=1.719373
! Fit after  self-cal, rms=0.201153Jy  sigma=1.716132
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201153Jy  sigma=1.716132
! Fit after  self-cal, rms=0.194159Jy  sigma=1.579515
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.967 mas, bmaj=9.73 mas, bpa=-2.725 degrees
! Estimated noise=2.84318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0319852 Jy
! Component: 100  -  total flux cleaned = 0.0339106 Jy
! Component: 150  -  total flux cleaned = 0.0346288 Jy
! Component: 200  -  total flux cleaned = 0.0346742 Jy
! Total flux subtracted in 200 components = 0.0346742 Jy
! Clean residual min=-0.034432 max=0.036473 Jy/beam
! Clean residual mean=-0.000393 rms=0.008984 Jy/beam
! Combined flux in latest and established models = 1.63929 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 94 components and 1.63929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185703Jy  sigma=1.464541
! Fit after  self-cal, rms=0.185571Jy  sigma=1.462895
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000210919 Jy
! Component: 100  -  total flux cleaned = 0.000785841 Jy
! Component: 150  -  total flux cleaned = 0.00124348 Jy
! Component: 200  -  total flux cleaned = 0.00167366 Jy
! Total flux subtracted in 200 components = 0.00167366 Jy
! Clean residual min=-0.034179 max=0.034297 Jy/beam
! Clean residual mean=-0.000403 rms=0.008782 Jy/beam
! Combined flux in latest and established models = 1.64096 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 109 components and 1.64096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182922Jy  sigma=1.440447
! Fit after  self-cal, rms=0.182731Jy  sigma=1.439683
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182731Jy  sigma=1.439683
! Fit after  self-cal, rms=0.181851Jy  sigma=1.417820
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=9.698 mas, bpa=-2.64 degrees
! Estimated noise=2.8663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185744 Jy
! Component: 100  -  total flux cleaned = 0.0191212 Jy
! Component: 150  -  total flux cleaned = 0.0191135 Jy
! Component: 200  -  total flux cleaned = 0.0195591 Jy
! Total flux subtracted in 200 components = 0.0195591 Jy
! Clean residual min=-0.030944 max=0.028927 Jy/beam
! Clean residual mean=-0.000297 rms=0.008214 Jy/beam
! Combined flux in latest and established models = 1.66052 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 135 components and 1.66052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177655Jy  sigma=1.386476
! Fit after  self-cal, rms=0.177512Jy  sigma=1.385965
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00047073 Jy
! Component: 100  -  total flux cleaned = 0.00085781 Jy
! Component: 150  -  total flux cleaned = 0.000859077 Jy
! Component: 200  -  total flux cleaned = 0.000861534 Jy
! Total flux subtracted in 200 components = 0.000861534 Jy
! Clean residual min=-0.030904 max=0.028592 Jy/beam
! Clean residual mean=-0.000297 rms=0.008089 Jy/beam
! Combined flux in latest and established models = 1.66138 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 145 components and 1.66138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175558Jy  sigma=1.373551
! Fit after  self-cal, rms=0.175438Jy  sigma=1.373089
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175438Jy  sigma=1.373089
! Fit after  self-cal, rms=0.175034Jy  sigma=1.362429
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.014 mas, bmaj=23.22 mas, bpa=-1.553 degrees
! Estimated noise=3.82132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00836837 Jy
! Component: 100  -  total flux cleaned = 0.0083815 Jy
! Component: 150  -  total flux cleaned = 0.00839477 Jy
! Component: 200  -  total flux cleaned = 0.00803221 Jy
! Total flux subtracted in 200 components = 0.00803221 Jy
! Clean residual min=-0.038353 max=0.035129 Jy/beam
! Clean residual mean=-0.000495 rms=0.010821 Jy/beam
! Combined flux in latest and established models = 1.66941 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 150 components and 1.66941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173284Jy  sigma=1.348364
! Fit after  self-cal, rms=0.173040Jy  sigma=1.345143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000355378 Jy
! Component: 100  -  total flux cleaned = 4.91685e-05 Jy
! Component: 150  -  total flux cleaned = 6.73873e-05 Jy
! Component: 200  -  total flux cleaned = 8.37152e-05 Jy
! Total flux subtracted in 200 components = 8.37152e-05 Jy
! Clean residual min=-0.038038 max=0.034218 Jy/beam
! Clean residual mean=-0.000490 rms=0.010746 Jy/beam
! Combined flux in latest and established models = 1.6695 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 154 components and 1.6695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172107Jy  sigma=1.341569
! Fit after  self-cal, rms=0.171934Jy  sigma=1.339441
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=9.683 mas, bpa=-2.575 degrees
! Estimated noise=2.87753 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.949 x 9.683 at -2.575 degrees (North through East)
! Clean map  min=-0.039569  max=1.0428 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.171934Jy  sigma=1.339441
! Fit after  self-cal, rms=0.168205Jy  sigma=1.294000
! Inverting map and beam 
! Estimated beam: bmin=2.945 mas, bmaj=9.68 mas, bpa=-2.553 degrees
! Estimated noise=2.88575 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578909 Jy
! Component: 100  -  total flux cleaned = 0.00579025 Jy
! Component: 150  -  total flux cleaned = 0.00615736 Jy
! Component: 200  -  total flux cleaned = 0.00649167 Jy
! Total flux subtracted in 200 components = 0.00649167 Jy
! Clean residual min=-0.027379 max=0.026615 Jy/beam
! Clean residual mean=-0.000235 rms=0.007342 Jy/beam
! Combined flux in latest and established models = 1.67599 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 166 components and 1.67599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166085Jy  sigma=1.278142
! Fit after  self-cal, rms=0.166008Jy  sigma=1.277928
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000323028 Jy
! Component: 100  -  total flux cleaned = 0.000598373 Jy
! Component: 150  -  total flux cleaned = 0.000596157 Jy
! Component: 200  -  total flux cleaned = 0.000850073 Jy
! Total flux subtracted in 200 components = 0.000850073 Jy
! Clean residual min=-0.027425 max=0.026115 Jy/beam
! Clean residual mean=-0.000235 rms=0.007283 Jy/beam
! Combined flux in latest and established models = 1.67684 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 179 components and 1.67684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164792Jy  sigma=1.271734
! Fit after  self-cal, rms=0.164714Jy  sigma=1.271507
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164714Jy  sigma=1.271507
! Fit after  self-cal, rms=0.164299Jy  sigma=1.266982
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.473 mas, bmaj=8.178 mas, bpa=-2.638 degrees
! Estimated noise=3.54382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.950768 Jy
! Component: 100  -  total flux cleaned = 1.19398 Jy
! Component: 150  -  total flux cleaned = 1.31713 Jy
! Component: 200  -  total flux cleaned = 1.39738 Jy
! Total flux subtracted in 200 components = 1.39738 Jy
! Clean residual min=-0.046617 max=0.063966 Jy/beam
! Clean residual mean=0.000427 rms=0.010947 Jy/beam
! Combined flux in latest and established models = 1.39738 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 1.39738 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.941 mas, bmaj=9.676 mas, bpa=-2.505 degrees
! Estimated noise=2.8881 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, 21.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104906 Jy
! Component: 100  -  total flux cleaned = 0.16823 Jy
! Component: 150  -  total flux cleaned = 0.208875 Jy
! Component: 200  -  total flux cleaned = 0.23285 Jy
! Total flux subtracted in 200 components = 0.23285 Jy
! Clean residual min=-0.032215 max=0.026530 Jy/beam
! Clean residual mean=-0.000096 rms=0.007841 Jy/beam
! Combined flux in latest and established models = 1.63023 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 83 components and 1.63023 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.015 mas, bmaj=23.26 mas, bpa=-1.403 degrees
! Estimated noise=3.85051 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213955 Jy
! Component: 100  -  total flux cleaned = 0.0255672 Jy
! Component: 150  -  total flux cleaned = 0.0288986 Jy
! Component: 200  -  total flux cleaned = 0.0305849 Jy
! Total flux subtracted in 200 components = 0.0305849 Jy
! Clean residual min=-0.035142 max=0.029037 Jy/beam
! Clean residual mean=-0.000374 rms=0.010161 Jy/beam
! Combined flux in latest and established models = 1.66082 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.14452e-05 Jy
! Component: 100  -  total flux cleaned = -2.59356e-05 Jy
! Component: 150  -  total flux cleaned = -0.000476463 Jy
! Component: 200  -  total flux cleaned = -0.000458457 Jy
! Total flux subtracted in 200 components = -0.000458457 Jy
! Clean residual min=-0.034821 max=0.027744 Jy/beam
! Clean residual mean=-0.000403 rms=0.009769 Jy/beam
! Combined flux in latest and established models = 1.66036 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 115 components and 1.66036 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.941 mas, bmaj=9.676 mas, bpa=-2.505 degrees
! Estimated noise=2.8881 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260974 Jy
! Component: 100  -  total flux cleaned = 0.00261346 Jy
! Component: 150  -  total flux cleaned = 0.00209573 Jy
! Component: 200  -  total flux cleaned = 0.00117187 Jy
! Total flux subtracted in 200 components = 0.00117187 Jy
! Clean residual min=-0.030577 max=0.022397 Jy/beam
! Clean residual mean=-0.000198 rms=0.006707 Jy/beam
! Combined flux in latest and established models = 1.66153 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 137 components and 1.66153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158949Jy  sigma=1.225805
! Fit after  self-cal, rms=0.158776Jy  sigma=1.220610
wmodel /scr/pima/bg219e_uvs/J1147-3812_S_map.mod
! Writing 137 model components to file: /scr/pima/bg219e_uvs/J1147-3812_S_map.mod
wobs /scr/pima/bg219e_uvs/J1147-3812_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1147-3812_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J1147-3812_S_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J1147-3812_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0127946 Jy
! Component: 100  -  total flux cleaned = -0.0207179 Jy
! Component: 150  -  total flux cleaned = -0.022303 Jy
! Component: 200  -  total flux cleaned = -0.0219445 Jy
! Component: 250  -  total flux cleaned = -0.022303 Jy
! Component: 300  -  total flux cleaned = -0.0216135 Jy
! Component: 350  -  total flux cleaned = -0.0212817 Jy
! Component: 400  -  total flux cleaned = -0.0197257 Jy
! Component: 450  -  total flux cleaned = -0.0188226 Jy
! Component: 500  -  total flux cleaned = -0.0173587 Jy
! Component: 550  -  total flux cleaned = -0.0162371 Jy
! Component: 600  -  total flux cleaned = -0.0156957 Jy
! Component: 650  -  total flux cleaned = -0.0149081 Jy
! Component: 700  -  total flux cleaned = -0.0149092 Jy
! Component: 750  -  total flux cleaned = -0.0139076 Jy
! Component: 800  -  total flux cleaned = -0.012929 Jy
! Component: 850  -  total flux cleaned = -0.0119767 Jy
! Component: 900  -  total flux cleaned = -0.0108129 Jy
! Component: 950  -  total flux cleaned = -0.00968589 Jy
! Component: 1000  -  total flux cleaned = -0.00902297 Jy
! Component: 1050  -  total flux cleaned = -0.00751117 Jy
! Component: 1100  -  total flux cleaned = -0.00624334 Jy
! Component: 1150  -  total flux cleaned = -0.00521039 Jy
! Component: 1200  -  total flux cleaned = -0.00399762 Jy
! Component: 1250  -  total flux cleaned = -0.0030133 Jy
! Component: 1300  -  total flux cleaned = -0.00185408 Jy
! Component: 1350  -  total flux cleaned = -0.000719197 Jy
! Component: 1400  -  total flux cleaned = 2.28001e-05 Jy
! Component: 1450  -  total flux cleaned = 0.000748999 Jy
! Component: 1500  -  total flux cleaned = 0.00164209 Jy
! Component: 1550  -  total flux cleaned = 0.00251445 Jy
! Component: 1600  -  total flux cleaned = 0.00302827 Jy
! Component: 1650  -  total flux cleaned = 0.00386732 Jy
! Component: 1700  -  total flux cleaned = 0.00468996 Jy
! Component: 1750  -  total flux cleaned = 0.00598393 Jy
! Component: 1800  -  total flux cleaned = 0.00646347 Jy
! Component: 1850  -  total flux cleaned = 0.00755838 Jy
! Component: 1900  -  total flux cleaned = 0.00863053 Jy
! Component: 1950  -  total flux cleaned = 0.00923315 Jy
! Component: 2000  -  total flux cleaned = 0.0104217 Jy
! Component: 2050  -  total flux cleaned = 0.0114455 Jy
! Component: 2100  -  total flux cleaned = 0.0123069 Jy
! Component: 2150  -  total flux cleaned = 0.0128721 Jy
! Component: 2200  -  total flux cleaned = 0.0135682 Jy
! Component: 2250  -  total flux cleaned = 0.0145284 Jy
! Component: 2300  -  total flux cleaned = 0.0156093 Jy
! Component: 2350  -  total flux cleaned = 0.016141 Jy
! Component: 2400  -  total flux cleaned = 0.0169282 Jy
! Component: 2450  -  total flux cleaned = 0.0177028 Jy
! Component: 2500  -  total flux cleaned = 0.0182125 Jy
! Component: 2550  -  total flux cleaned = 0.0189684 Jy
! Component: 2600  -  total flux cleaned = 0.0198375 Jy
! Component: 2650  -  total flux cleaned = 0.0205704 Jy
! Component: 2700  -  total flux cleaned = 0.021172 Jy
! Component: 2750  -  total flux cleaned = 0.0215321 Jy
! Component: 2800  -  total flux cleaned = 0.0224734 Jy
! Component: 2850  -  total flux cleaned = 0.0232839 Jy
! Component: 2900  -  total flux cleaned = 0.0239684 Jy
! Component: 2950  -  total flux cleaned = 0.0246447 Jy
! Component: 3000  -  total flux cleaned = 0.0250893 Jy
! Component: 3050  -  total flux cleaned = 0.0258567 Jy
! Component: 3100  -  total flux cleaned = 0.0263983 Jy
! Component: 3150  -  total flux cleaned = 0.0271476 Jy
! Component: 3200  -  total flux cleaned = 0.027676 Jy
! Component: 3250  -  total flux cleaned = 0.0280948 Jy
! Component: 3300  -  total flux cleaned = 0.02892 Jy
! Component: 3350  -  total flux cleaned = 0.0297329 Jy
! Component: 3400  -  total flux cleaned = 0.0302341 Jy
! Component: 3450  -  total flux cleaned = 0.0307298 Jy
! Component: 3500  -  total flux cleaned = 0.03122 Jy
! Component: 3550  -  total flux cleaned = 0.03219 Jy
! Component: 3600  -  total flux cleaned = 0.0327636 Jy
! Component: 3650  -  total flux cleaned = 0.0334276 Jy
! Component: 3700  -  total flux cleaned = 0.0340826 Jy
! Component: 3750  -  total flux cleaned = 0.0347308 Jy
! Component: 3800  -  total flux cleaned = 0.0353706 Jy
! Component: 3850  -  total flux cleaned = 0.0358236 Jy
! Component: 3900  -  total flux cleaned = 0.0365397 Jy
! Component: 3950  -  total flux cleaned = 0.0371579 Jy
! Component: 4000  -  total flux cleaned = 0.0375966 Jy
! Component: 4050  -  total flux cleaned = 0.03829 Jy
! Total flux subtracted in 4096 components = 0.0387182 Jy
! Clean residual min=-0.005438 max=0.005396 Jy/beam
! Clean residual mean=-0.000006 rms=0.001743 Jy/beam
! Combined flux in latest and established models = 1.70025 Jy
keep
! Adding 433 model components to the UV plane model.
! The established model now contains 570 components and 1.70025 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1147-3812_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.941 x 9.676 at -2.505 degrees (North through East)
! Clean map  min=-0.040343  max=1.0767 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1147-3812_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.07671 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00177333 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.494096 0.494096 0.988193 1.97639 3.95277 7.90554 15.8111 31.6222 63.2443
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0053 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  607.169 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1147-3812_S_uvs.log closed on Thu Apr  7 06:43:11 2016