! Started logfile: /scr/pima/bg219e_uvs/J1126-3828_S_dfm.log on Thu May 19 18:36:17 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1126-3828_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1126-3828_S_uva.fits
! AN table 1: 26 integrations on 28 of 28 possible baselines.
! AN table 2: 26 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.903846 visibilities/baseline/integration-bin.
! Found source: J1126-3828
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 5264 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1126-3828_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.024965Jy  sigma=14.061844
! Fit after  self-cal, rms=0.785367Jy  sigma=10.585900
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.567 mas, bmaj=7.963 mas, bpa=-2.202 degrees
! Estimated noise=1.12785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146777 Jy
! Component: 100  -  total flux cleaned = 0.20353 Jy
! Total flux subtracted in 100 components = 0.20353 Jy
! Clean residual min=-0.020873 max=0.053775 Jy/beam
! Clean residual mean=-0.000349 rms=0.006498 Jy/beam
! Combined flux in latest and established models = 0.20353 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.20353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169994Jy  sigma=2.380697
! Fit after  self-cal, rms=0.169945Jy  sigma=2.379148
! Inverting map 
! Added new window around map position (3.5, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0511143 Jy
! Component: 100  -  total flux cleaned = 0.0821213 Jy
! Total flux subtracted in 100 components = 0.0821213 Jy
! Clean residual min=-0.014952 max=0.032295 Jy/beam
! Clean residual mean=-0.000270 rms=0.004622 Jy/beam
! Combined flux in latest and established models = 0.285651 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 0.285651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141332Jy  sigma=1.908162
! Fit after  self-cal, rms=0.140322Jy  sigma=1.899290
! Inverting map 
! Added new window around map position (-6.5, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029746 Jy
! Component: 100  -  total flux cleaned = 0.0486597 Jy
! Total flux subtracted in 100 components = 0.0486597 Jy
! Clean residual min=-0.012061 max=0.024822 Jy/beam
! Clean residual mean=-0.000223 rms=0.003782 Jy/beam
! Combined flux in latest and established models = 0.334311 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 54 components and 0.334311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129112Jy  sigma=1.710506
! Fit after  self-cal, rms=0.128984Jy  sigma=1.705914
! Inverting map 
! Added new window around map position (10, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232755 Jy
! Component: 100  -  total flux cleaned = 0.0392804 Jy
! Total flux subtracted in 100 components = 0.0392804 Jy
! Clean residual min=-0.010663 max=0.014865 Jy/beam
! Clean residual mean=-0.000171 rms=0.003103 Jy/beam
! Combined flux in latest and established models = 0.373591 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.373591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120463Jy  sigma=1.569660
! Fit after  self-cal, rms=0.120185Jy  sigma=1.566729
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.293 mas, bmaj=9.989 mas, bpa=-0.5609 degrees
! Estimated noise=0.763803 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0302382 Jy
! Component: 100  -  total flux cleaned = 0.051039 Jy
! Component: 150  -  total flux cleaned = 0.0663767 Jy
! Component: 200  -  total flux cleaned = 0.0778179 Jy
! Total flux subtracted in 200 components = 0.0778179 Jy
! Clean residual min=-0.009850 max=0.015821 Jy/beam
! Clean residual mean=-0.000229 rms=0.003487 Jy/beam
! Combined flux in latest and established models = 0.451409 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 100 components and 0.451409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110964Jy  sigma=1.414279
! Fit after  self-cal, rms=0.110451Jy  sigma=1.408556
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.293 x 9.989 at -0.5609 degrees (North through East)
! Clean map  min=-0.0096509  max=0.19388 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.12     KP        0.99     LA        0.94     
!   NL        0.92     OV        1.10     PT        0.97     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.94     KP        1.01     LA        0.94     MK        0.99     
!   NL        1.09     OV        1.00     PT        0.96     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.93     KP        1.01     LA        0.93     MK        0.95     
!   NL        1.18     OV        1.01     PT        0.95     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.94     KP        0.99     LA        0.94     MK        0.93     
!   NL        1.17     OV        1.02     PT        0.93     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.17     KP        1.02     LA        0.97     
!   NL        0.87     OV        1.12     PT        0.98     SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.98     KP        1.00     LA        0.93     MK        1.05     
!   NL        1.12     OV        1.01     PT        0.95     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.110451Jy  sigma=1.408556
! Fit after  self-cal, rms=0.110004Jy  sigma=1.380784
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=9.925 mas, bpa=-0.7127 degrees
! Estimated noise=0.751539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (19, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014786 Jy
! Component: 100  -  total flux cleaned = 0.0223615 Jy
! Component: 150  -  total flux cleaned = 0.0258606 Jy
! Component: 200  -  total flux cleaned = 0.0276943 Jy
! Total flux subtracted in 200 components = 0.0276943 Jy
! Clean residual min=-0.007788 max=0.007349 Jy/beam
! Clean residual mean=0.000058 rms=0.001991 Jy/beam
! Combined flux in latest and established models = 0.479104 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 143 components and 0.479103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108220Jy  sigma=1.348619
! Fit after  self-cal, rms=0.107862Jy  sigma=1.343390
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107862Jy  sigma=1.343390
! Fit after  self-cal, rms=0.109021Jy  sigma=1.335744
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.293 mas, bmaj=9.903 mas, bpa=-0.8239 degrees
! Estimated noise=0.750221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00338925 Jy
! Component: 100  -  total flux cleaned = 0.00473095 Jy
! Component: 150  -  total flux cleaned = 0.00533114 Jy
! Component: 200  -  total flux cleaned = 0.00581542 Jy
! Total flux subtracted in 200 components = 0.00581542 Jy
! Clean residual min=-0.006627 max=0.006003 Jy/beam
! Clean residual mean=0.000022 rms=0.001588 Jy/beam
! Combined flux in latest and established models = 0.484919 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 170 components and 0.484919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108566Jy  sigma=1.328223
! Fit after  self-cal, rms=0.108425Jy  sigma=1.326457
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000343088 Jy
! Component: 100  -  total flux cleaned = 0.00150892 Jy
! Component: 150  -  total flux cleaned = 0.0016739 Jy
! Component: 200  -  total flux cleaned = 0.00190307 Jy
! Total flux subtracted in 200 components = 0.00190307 Jy
! Clean residual min=-0.006556 max=0.005707 Jy/beam
! Clean residual mean=0.000030 rms=0.001466 Jy/beam
! Combined flux in latest and established models = 0.486822 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 185 components and 0.486822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108227Jy  sigma=1.323498
! Fit after  self-cal, rms=0.108135Jy  sigma=1.322745
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108135Jy  sigma=1.322745
! Fit after  self-cal, rms=0.108560Jy  sigma=1.321590
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.289 mas, bmaj=9.879 mas, bpa=-0.8794 degrees
! Estimated noise=0.748644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000616308 Jy
! Component: 100  -  total flux cleaned = 0.00102364 Jy
! Component: 150  -  total flux cleaned = 0.00147889 Jy
! Component: 200  -  total flux cleaned = 0.00154429 Jy
! Total flux subtracted in 200 components = 0.00154429 Jy
! Clean residual min=-0.005630 max=0.005257 Jy/beam
! Clean residual mean=0.000022 rms=0.001336 Jy/beam
! Combined flux in latest and established models = 0.488366 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 200 components and 0.488366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108388Jy  sigma=1.319003
! Fit after  self-cal, rms=0.108326Jy  sigma=1.318377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121035 Jy
! Component: 100  -  total flux cleaned = 0.000475166 Jy
! Component: 150  -  total flux cleaned = 0.000536921 Jy
! Component: 200  -  total flux cleaned = 0.000536969 Jy
! Total flux subtracted in 200 components = 0.000536969 Jy
! Clean residual min=-0.005479 max=0.005067 Jy/beam
! Clean residual mean=0.000025 rms=0.001276 Jy/beam
! Combined flux in latest and established models = 0.488903 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 210 components and 0.488903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108218Jy  sigma=1.316990
! Fit after  self-cal, rms=0.108169Jy  sigma=1.316618
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108169Jy  sigma=1.316618
! Fit after  self-cal, rms=0.108445Jy  sigma=1.316249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.352 mas, bmaj=27.13 mas, bpa=-3.316 degrees
! Estimated noise=0.923782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000735551 Jy
! Component: 100  -  total flux cleaned = -0.000135142 Jy
! Component: 150  -  total flux cleaned = -0.00013318 Jy
! Component: 200  -  total flux cleaned = -0.00018857 Jy
! Total flux subtracted in 200 components = -0.00018857 Jy
! Clean residual min=-0.006380 max=0.005241 Jy/beam
! Clean residual mean=0.000035 rms=0.001530 Jy/beam
! Combined flux in latest and established models = 0.488715 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 221 components and 0.488715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108404Jy  sigma=1.315665
! Fit after  self-cal, rms=0.108377Jy  sigma=1.315144
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000293395 Jy
! Component: 100  -  total flux cleaned = 9.84507e-05 Jy
! Component: 150  -  total flux cleaned = 0.000153182 Jy
! Component: 200  -  total flux cleaned = 0.000204364 Jy
! Total flux subtracted in 200 components = 0.000204364 Jy
! Clean residual min=-0.006188 max=0.004843 Jy/beam
! Clean residual mean=0.000037 rms=0.001449 Jy/beam
! Combined flux in latest and established models = 0.488919 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 230 components and 0.488919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108366Jy  sigma=1.315058
! Fit after  self-cal, rms=0.108345Jy  sigma=1.314814
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.282 mas, bmaj=9.853 mas, bpa=-0.8985 degrees
! Estimated noise=0.746938 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.282 x 9.853 at -0.8985 degrees (North through East)
! Clean map  min=-0.0085631  max=0.18793 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.554 mas, bmaj=7.874 mas, bpa=-2.318 degrees
! Estimated noise=1.11011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146627 Jy
! Component: 100  -  total flux cleaned = 0.211672 Jy
! Component: 150  -  total flux cleaned = 0.252536 Jy
! Component: 200  -  total flux cleaned = 0.283338 Jy
! Total flux subtracted in 200 components = 0.283338 Jy
! Clean residual min=-0.012990 max=0.019542 Jy/beam
! Clean residual mean=-0.000252 rms=0.003937 Jy/beam
! Combined flux in latest and established models = 0.283338 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.283338 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.282 mas, bmaj=9.853 mas, bpa=-0.8985 degrees
! Estimated noise=0.746938 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0516522 Jy
! Component: 100  -  total flux cleaned = 0.0869759 Jy
! Component: 150  -  total flux cleaned = 0.112212 Jy
! Component: 200  -  total flux cleaned = 0.131221 Jy
! Total flux subtracted in 200 components = 0.131221 Jy
! Clean residual min=-0.008378 max=0.012072 Jy/beam
! Clean residual mean=-0.000225 rms=0.003078 Jy/beam
! Combined flux in latest and established models = 0.414558 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 111 components and 0.414558 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.352 mas, bmaj=27.13 mas, bpa=-3.316 degrees
! Estimated noise=0.923782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0243289 Jy
! Component: 100  -  total flux cleaned = 0.0398836 Jy
! Component: 150  -  total flux cleaned = 0.050289 Jy
! Component: 200  -  total flux cleaned = 0.0574557 Jy
! Total flux subtracted in 200 components = 0.0574557 Jy
! Clean residual min=-0.006127 max=0.005150 Jy/beam
! Clean residual mean=-0.000060 rms=0.001772 Jy/beam
! Combined flux in latest and established models = 0.472014 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499818 Jy
! Component: 100  -  total flux cleaned = 0.00849927 Jy
! Component: 150  -  total flux cleaned = 0.0109687 Jy
! Component: 200  -  total flux cleaned = 0.0127263 Jy
! Total flux subtracted in 200 components = 0.0127263 Jy
! Clean residual min=-0.005462 max=0.004439 Jy/beam
! Clean residual mean=0.000022 rms=0.001384 Jy/beam
! Combined flux in latest and established models = 0.48474 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 188 components and 0.48474 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.282 mas, bmaj=9.853 mas, bpa=-0.8985 degrees
! Estimated noise=0.746938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100852 Jy
! Component: 100  -  total flux cleaned = 0.00129757 Jy
! Component: 150  -  total flux cleaned = 0.0016244 Jy
! Component: 200  -  total flux cleaned = 0.00169952 Jy
! Total flux subtracted in 200 components = 0.00169952 Jy
! Clean residual min=-0.004971 max=0.004153 Jy/beam
! Clean residual mean=0.000018 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.48644 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 203 components and 0.48644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108295Jy  sigma=1.314086
! Fit after  self-cal, rms=0.108134Jy  sigma=1.312678
wmodel /J1126-3828_S_map.mod
! wmodel: Unable to open new model file: /J1126-3828_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1126-3828_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.282 x 9.853 at -0.8985 degrees (North through East)
! Clean map  min=-0.0046738  max=0.20217 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1126-3828_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.202174 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00110577 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.64081 1.64081 3.28162 6.56324 13.1265 26.253 52.5059
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0033 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.202 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  182.836 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1126-3828_S_dfm.log closed on Thu May 19 18:36:19 2016