! Started logfile: /scr/pima/bg219e_uvs/J1110+4817_X_uvs.log on Thu Apr 7 09:06:35 2016 obs /scr/pima/bg219e_uvs/J1110+4817_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219e_uvs/J1110+4817_X_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! AN table 2: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.808796 visibilities/baseline/integration-bin. ! Found source: J1110+4817 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20964 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1110+4817_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.002827Jy sigma=25.297932 ! Fit after self-cal, rms=0.952053Jy sigma=23.983764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9776 mas, bmaj=1.251 mas, bpa=-15.86 degrees ! Estimated noise=0.594914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034703 Jy ! Component: 100 - total flux cleaned = 0.0450559 Jy ! Total flux subtracted in 100 components = 0.0450559 Jy ! Clean residual min=-0.005759 max=0.005708 Jy/beam ! Clean residual mean=0.000031 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.0450559 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0450559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.061703Jy sigma=1.513461 ! Fit after self-cal, rms=0.059804Jy sigma=1.465371 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.252 mas, bmaj=1.458 mas, bpa=-12.93 degrees ! Estimated noise=0.269534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120835 Jy ! Component: 100 - total flux cleaned = 0.0187828 Jy ! Component: 150 - total flux cleaned = 0.022773 Jy ! Component: 200 - total flux cleaned = 0.0252077 Jy ! Total flux subtracted in 200 components = 0.0252077 Jy ! Clean residual min=-0.004574 max=0.006284 Jy/beam ! Clean residual mean=0.000033 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.0702636 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.0702636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057386Jy sigma=1.399971 ! Fit after self-cal, rms=0.057355Jy sigma=1.396942 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.252 x 1.458 at -12.93 degrees (North through East) ! Clean map min=-0.0047326 max=0.047933 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.01 KP 0.96 LA 0.93 ! MK 1.19 NL 1.01 OV 0.95 PT 0.90 ! SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 0.96 KP 0.96 LA 0.89 ! MK 1.19 NL 1.01 OV 1.02 PT 0.89 ! SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.12 HN 1.06 KP 0.87 ! LA 0.90 NL 1.02 OV 1.12 PT 1.01 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.12 HN 0.94 KP 0.86 ! LA 0.93 NL 1.09 OV 1.18 PT 0.94 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.15 HN 1.06 KP 0.90 ! LA 0.94 NL 1.10 OV 1.11 PT 1.00 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 0.91 KP 1.04 LA 1.02 ! MK 1.15 NL 1.02 OV 0.94 PT 0.87 ! SC 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 0.96 KP 1.08 LA 1.02 ! MK 0.99 NL 1.02 OV 0.94 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.17 HN 0.88 KP 0.90 ! LA 0.86 NL 1.08 OV 1.08 PT 0.94 ! SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057355Jy sigma=1.396942 ! Fit after self-cal, rms=0.057265Jy sigma=1.391419 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.265 mas, bmaj=1.468 mas, bpa=-12.55 degrees ! Estimated noise=0.26861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126065 Jy ! Component: 100 - total flux cleaned = 0.00150994 Jy ! Component: 150 - total flux cleaned = 0.00180451 Jy ! Component: 200 - total flux cleaned = 0.00206055 Jy ! Total flux subtracted in 200 components = 0.00206055 Jy ! Clean residual min=-0.004521 max=0.006132 Jy/beam ! Clean residual mean=0.000018 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.0723241 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.0723241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.057183Jy sigma=1.389248 ! Fit after self-cal, rms=0.057212Jy sigma=1.387729 ! Inverting map ! Added new window around map position (-12.8, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615437 Jy ! Component: 100 - total flux cleaned = 0.00950149 Jy ! Component: 150 - total flux cleaned = 0.0112767 Jy ! Component: 200 - total flux cleaned = 0.0124831 Jy ! Total flux subtracted in 200 components = 0.0124831 Jy ! Clean residual min=-0.003483 max=0.006150 Jy/beam ! Clean residual mean=0.000040 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0848072 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 81 components and 0.0848072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.056547Jy sigma=1.369143 ! Fit after self-cal, rms=0.056442Jy sigma=1.366298 ! Inverting map ! Added new window around map position (-2.2, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00576295 Jy ! Component: 100 - total flux cleaned = 0.0091669 Jy ! Component: 150 - total flux cleaned = 0.0118317 Jy ! Component: 200 - total flux cleaned = 0.0140391 Jy ! Total flux subtracted in 200 components = 0.0140391 Jy ! Clean residual min=-0.002427 max=0.002889 Jy/beam ! Clean residual mean=0.000022 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0988464 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 127 components and 0.0988464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.055763Jy sigma=1.347763 ! Fit after self-cal, rms=0.055638Jy sigma=1.345171 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.055638Jy sigma=1.345171 ! Fit after self-cal, rms=0.054862Jy sigma=1.341311 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.268 mas, bmaj=1.484 mas, bpa=-13.49 degrees ! Estimated noise=0.264846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270751 Jy ! Component: 100 - total flux cleaned = 0.00471803 Jy ! Component: 150 - total flux cleaned = 0.00635838 Jy ! Component: 200 - total flux cleaned = 0.00775286 Jy ! Total flux subtracted in 200 components = 0.00775286 Jy ! Clean residual min=-0.002004 max=0.002208 Jy/beam ! Clean residual mean=0.000006 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.106599 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 150 components and 0.106599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054667Jy sigma=1.336084 ! Fit after self-cal, rms=0.054631Jy sigma=1.334885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-43.4, -23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213193 Jy ! Component: 100 - total flux cleaned = 0.00353737 Jy ! Component: 150 - total flux cleaned = 0.00468799 Jy ! Component: 200 - total flux cleaned = 0.00540612 Jy ! Total flux subtracted in 200 components = 0.00540612 Jy ! Clean residual min=-0.001870 max=0.001892 Jy/beam ! Clean residual mean=0.000003 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.112005 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 164 components and 0.112005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054517Jy sigma=1.332021 ! Fit after self-cal, rms=0.054498Jy sigma=1.331581 ! Inverting map ! Added new window around map position (0.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185635 Jy ! Component: 100 - total flux cleaned = 0.00272107 Jy ! Component: 150 - total flux cleaned = 0.00311238 Jy ! Component: 200 - total flux cleaned = 0.00339464 Jy ! Total flux subtracted in 200 components = 0.00339464 Jy ! Clean residual min=-0.001663 max=0.001638 Jy/beam ! Clean residual mean=-0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.1154 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 176 components and 0.1154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054411Jy sigma=1.329571 ! Fit after self-cal, rms=0.054396Jy sigma=1.329201 ! Inverting map ! Added new window around map position (-43.6, 29.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154361 Jy ! Component: 100 - total flux cleaned = 0.00228074 Jy ! Component: 150 - total flux cleaned = 0.0026623 Jy ! Component: 200 - total flux cleaned = 0.00288691 Jy ! Total flux subtracted in 200 components = 0.00288691 Jy ! Clean residual min=-0.001565 max=0.001509 Jy/beam ! Clean residual mean=-0.000005 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.118287 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 193 components and 0.118287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054333Jy sigma=1.327720 ! Fit after self-cal, rms=0.054316Jy sigma=1.327417 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054316Jy sigma=1.327417 ! Fit after self-cal, rms=0.054222Jy sigma=1.326666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.263 mas, bmaj=1.479 mas, bpa=-14.23 degrees ! Estimated noise=0.264825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121529 Jy ! Component: 100 - total flux cleaned = 0.00198956 Jy ! Component: 150 - total flux cleaned = 0.00248341 Jy ! Component: 200 - total flux cleaned = 0.00278668 Jy ! Total flux subtracted in 200 components = 0.00278668 Jy ! Clean residual min=-0.001680 max=0.001483 Jy/beam ! Clean residual mean=-0.000003 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.121074 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 209 components and 0.121074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054176Jy sigma=1.325549 ! Fit after self-cal, rms=0.054163Jy sigma=1.325314 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560421 Jy ! Component: 100 - total flux cleaned = 0.000801635 Jy ! Component: 150 - total flux cleaned = 0.000999347 Jy ! Component: 200 - total flux cleaned = 0.00118619 Jy ! Total flux subtracted in 200 components = 0.00118619 Jy ! Clean residual min=-0.001589 max=0.001382 Jy/beam ! Clean residual mean=-0.000003 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.12226 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 224 components and 0.12226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054134Jy sigma=1.324636 ! Fit after self-cal, rms=0.054120Jy sigma=1.324313 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054120Jy sigma=1.324313 ! Fit after self-cal, rms=0.054083Jy sigma=1.324129 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.363 mas, bmaj=2.808 mas, bpa=-45.49 degrees ! Estimated noise=0.316514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114894 Jy ! Component: 100 - total flux cleaned = 0.00194048 Jy ! Component: 150 - total flux cleaned = 0.00247566 Jy ! Component: 200 - total flux cleaned = 0.00278772 Jy ! Total flux subtracted in 200 components = 0.00278772 Jy ! Clean residual min=-0.001447 max=0.001113 Jy/beam ! Clean residual mean=-0.000002 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.125047 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 247 components and 0.125047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054063Jy sigma=1.323611 ! Fit after self-cal, rms=0.054058Jy sigma=1.323510 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585881 Jy ! Component: 100 - total flux cleaned = 0.000929682 Jy ! Component: 150 - total flux cleaned = 0.00119792 Jy ! Component: 200 - total flux cleaned = 0.00133915 Jy ! Total flux subtracted in 200 components = 0.00133915 Jy ! Clean residual min=-0.001283 max=0.001044 Jy/beam ! Clean residual mean=-0.000004 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.126387 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 258 components and 0.126386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054047Jy sigma=1.323275 ! Fit after self-cal, rms=0.054047Jy sigma=1.323239 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.258 mas, bmaj=1.474 mas, bpa=-14.3 degrees ! Estimated noise=0.264957 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.258 x 1.474 at -14.3 degrees (North through East) ! Clean map min=-0.0013352 max=0.046682 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9815 mas, bmaj=1.259 mas, bpa=-16.43 degrees ! Estimated noise=0.585642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346447 Jy ! Component: 100 - total flux cleaned = 0.0463606 Jy ! Component: 150 - total flux cleaned = 0.0544327 Jy ! Component: 200 - total flux cleaned = 0.0611811 Jy ! Total flux subtracted in 200 components = 0.0611811 Jy ! Clean residual min=-0.006147 max=0.005099 Jy/beam ! Clean residual mean=0.000024 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.0611811 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0611811 Jy ! Inverting map and beam ! Estimated beam: bmin=1.258 mas, bmaj=1.474 mas, bpa=-14.3 degrees ! Estimated noise=0.264957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00937087 Jy ! Component: 100 - total flux cleaned = 0.0164025 Jy ! Component: 150 - total flux cleaned = 0.0221877 Jy ! Component: 200 - total flux cleaned = 0.0270515 Jy ! Total flux subtracted in 200 components = 0.0270515 Jy ! Clean residual min=-0.003539 max=0.003304 Jy/beam ! Clean residual mean=0.000026 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.0882326 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 86 components and 0.0882326 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.363 mas, bmaj=2.808 mas, bpa=-45.49 degrees ! Estimated noise=0.316514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667887 Jy ! Component: 100 - total flux cleaned = 0.0116233 Jy ! Component: 150 - total flux cleaned = 0.0154993 Jy ! Component: 200 - total flux cleaned = 0.0186493 Jy ! Total flux subtracted in 200 components = 0.0186493 Jy ! Clean residual min=-0.002714 max=0.002348 Jy/beam ! Clean residual mean=0.000025 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.106882 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264471 Jy ! Component: 100 - total flux cleaned = 0.00491298 Jy ! Component: 150 - total flux cleaned = 0.00687645 Jy ! Component: 200 - total flux cleaned = 0.00858917 Jy ! Total flux subtracted in 200 components = 0.00858917 Jy ! Clean residual min=-0.001995 max=0.001643 Jy/beam ! Clean residual mean=0.000012 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.115471 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 178 components and 0.115471 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.258 mas, bmaj=1.474 mas, bpa=-14.3 degrees ! Estimated noise=0.264957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187053 Jy ! Component: 100 - total flux cleaned = 0.00317986 Jy ! Component: 150 - total flux cleaned = 0.00401054 Jy ! Component: 200 - total flux cleaned = 0.00466242 Jy ! Total flux subtracted in 200 components = 0.00466242 Jy ! Clean residual min=-0.001754 max=0.001590 Jy/beam ! Clean residual mean=0.000003 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.120133 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 201 components and 0.120133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.054199Jy sigma=1.326499 ! Fit after self-cal, rms=0.054124Jy sigma=1.325227 wmodel /scr/pima/bg219e_uvs/J1110+4817_X_map.mod ! Writing 201 model components to file: /scr/pima/bg219e_uvs/J1110+4817_X_map.mod wobs /scr/pima/bg219e_uvs/J1110+4817_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219e_uvs/J1110+4817_X_uvs.fits wwins /scr/pima/bg219e_uvs/J1110+4817_X_map.win ! wwins: Wrote 6 windows to /scr/pima/bg219e_uvs/J1110+4817_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000579177 Jy ! Component: 100 - total flux cleaned = -0.00107396 Jy ! Component: 150 - total flux cleaned = -0.00139304 Jy ! Component: 200 - total flux cleaned = -0.00157862 Jy ! Component: 250 - total flux cleaned = -0.00177889 Jy ! Component: 300 - total flux cleaned = -0.00190766 Jy ! Component: 350 - total flux cleaned = -0.00199087 Jy ! Component: 400 - total flux cleaned = -0.00199146 Jy ! Component: 450 - total flux cleaned = -0.00205072 Jy ! Component: 500 - total flux cleaned = -0.00205042 Jy ! Component: 550 - total flux cleaned = -0.00205001 Jy ! Component: 600 - total flux cleaned = -0.00208668 Jy ! Component: 650 - total flux cleaned = -0.00212239 Jy ! Component: 700 - total flux cleaned = -0.00212216 Jy ! Component: 750 - total flux cleaned = -0.00208815 Jy ! Component: 800 - total flux cleaned = -0.00210474 Jy ! Component: 850 - total flux cleaned = -0.00208834 Jy ! Component: 900 - total flux cleaned = -0.00207193 Jy ! Component: 950 - total flux cleaned = -0.00205627 Jy ! Component: 1000 - total flux cleaned = -0.00207146 Jy ! Component: 1050 - total flux cleaned = -0.00205623 Jy ! Component: 1100 - total flux cleaned = -0.00204132 Jy ! Component: 1150 - total flux cleaned = -0.00207075 Jy ! Component: 1200 - total flux cleaned = -0.0020129 Jy ! Component: 1250 - total flux cleaned = -0.0020129 Jy ! Component: 1300 - total flux cleaned = -0.002041 Jy ! Component: 1350 - total flux cleaned = -0.00205462 Jy ! Component: 1400 - total flux cleaned = -0.00198631 Jy ! Component: 1450 - total flux cleaned = -0.0019729 Jy ! Component: 1500 - total flux cleaned = -0.00195971 Jy ! Component: 1550 - total flux cleaned = -0.00192024 Jy ! Component: 1600 - total flux cleaned = -0.00189424 Jy ! Component: 1650 - total flux cleaned = -0.00184294 Jy ! Component: 1700 - total flux cleaned = -0.00179222 Jy ! Component: 1750 - total flux cleaned = -0.00177987 Jy ! Component: 1800 - total flux cleaned = -0.00173032 Jy ! Component: 1850 - total flux cleaned = -0.00171788 Jy ! Component: 1900 - total flux cleaned = -0.0016451 Jy ! Component: 1950 - total flux cleaned = -0.00164511 Jy ! Component: 2000 - total flux cleaned = -0.00159755 Jy ! Component: 2050 - total flux cleaned = -0.00153859 Jy ! Component: 2100 - total flux cleaned = -0.00149182 Jy ! Component: 2150 - total flux cleaned = -0.00144568 Jy ! Component: 2200 - total flux cleaned = -0.00136576 Jy ! Component: 2250 - total flux cleaned = -0.00130901 Jy ! Component: 2300 - total flux cleaned = -0.00125286 Jy ! Component: 2350 - total flux cleaned = -0.00117496 Jy ! Component: 2400 - total flux cleaned = -0.00111984 Jy ! Component: 2450 - total flux cleaned = -0.00107607 Jy ! Component: 2500 - total flux cleaned = -0.00105433 Jy ! Component: 2550 - total flux cleaned = -0.00096817 Jy ! Component: 2600 - total flux cleaned = -0.000957583 Jy ! Component: 2650 - total flux cleaned = -0.000968118 Jy ! Component: 2700 - total flux cleaned = -0.000894413 Jy ! Component: 2750 - total flux cleaned = -0.000852669 Jy ! Component: 2800 - total flux cleaned = -0.000790636 Jy ! Component: 2850 - total flux cleaned = -0.000780374 Jy ! Component: 2900 - total flux cleaned = -0.00078036 Jy ! Component: 2950 - total flux cleaned = -0.000759953 Jy ! Component: 3000 - total flux cleaned = -0.000689531 Jy ! Component: 3050 - total flux cleaned = -0.000659579 Jy ! Component: 3100 - total flux cleaned = -0.000629919 Jy ! Component: 3150 - total flux cleaned = -0.000600457 Jy ! Component: 3200 - total flux cleaned = -0.000580865 Jy ! Component: 3250 - total flux cleaned = -0.000551689 Jy ! Component: 3300 - total flux cleaned = -0.00048422 Jy ! Component: 3350 - total flux cleaned = -0.000484277 Jy ! Component: 3400 - total flux cleaned = -0.000455685 Jy ! Component: 3450 - total flux cleaned = -0.000389538 Jy ! Component: 3500 - total flux cleaned = -0.000361461 Jy ! Component: 3550 - total flux cleaned = -0.000342708 Jy ! Component: 3600 - total flux cleaned = -0.000287113 Jy ! Component: 3650 - total flux cleaned = -0.000268705 Jy ! Component: 3700 - total flux cleaned = -0.000259513 Jy ! Component: 3750 - total flux cleaned = -0.000259456 Jy ! Component: 3800 - total flux cleaned = -0.000178073 Jy ! Component: 3850 - total flux cleaned = -0.00016009 Jy ! Component: 3900 - total flux cleaned = -0.000133225 Jy ! Component: 3950 - total flux cleaned = -0.000115361 Jy ! Component: 4000 - total flux cleaned = -8.8893e-05 Jy ! Component: 4050 - total flux cleaned = -8.8869e-05 Jy ! Total flux subtracted in 4096 components = -6.26881e-05 Jy ! Clean residual min=-0.000571 max=0.000559 Jy/beam ! Clean residual mean=0.000001 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.120071 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 467 components and 0.120071 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219e_uvs/J1110+4817_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.258 x 1.474 at -14.3 degrees (North through East) ! Clean map min=-0.00094259 max=0.046682 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1110+4817_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0466816 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013836 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.889173 0.889173 1.77835 3.55669 7.11338 14.2268 28.4535 56.9071 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.046 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 337.392 quit ! Quitting program ! Log file /scr/pima/bg219e_uvs/J1110+4817_X_uvs.log closed on Thu Apr 7 09:06:39 2016