! Started logfile: /scr/pima/bg219e_uvs/J1110+4817_S_dfm.log on Thu May 19 18:35:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J1110+4817_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1110+4817_S_uva.fits
! AN table 1: 30 integrations on 36 of 36 possible baselines.
! AN table 2: 30 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.885648 visibilities/baseline/integration-bin.
! Found source: J1110+4817
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7652 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1110+4817_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.034496Jy  sigma=23.182251
! Fit after  self-cal, rms=0.841211Jy  sigma=18.879443
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.194 mas, bmaj=4.523 mas, bpa=-22.43 degrees
! Estimated noise=0.63964 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114697 Jy
! Component: 100  -  total flux cleaned = 0.156907 Jy
! Total flux subtracted in 100 components = 0.156907 Jy
! Clean residual min=-0.021922 max=0.079168 Jy/beam
! Clean residual mean=-0.000066 rms=0.007029 Jy/beam
! Combined flux in latest and established models = 0.156907 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.156907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141771Jy  sigma=3.155580
! Fit after  self-cal, rms=0.140779Jy  sigma=3.131607
! Inverting map 
! Added new window around map position (-13.5, -18).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0693625 Jy
! Component: 100  -  total flux cleaned = 0.0998422 Jy
! Total flux subtracted in 100 components = 0.0998422 Jy
! Clean residual min=-0.013855 max=0.020566 Jy/beam
! Clean residual mean=-0.000048 rms=0.003737 Jy/beam
! Combined flux in latest and established models = 0.256749 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.256749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093777Jy  sigma=2.087691
! Fit after  self-cal, rms=0.088039Jy  sigma=1.954772
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246782 Jy
! Component: 100  -  total flux cleaned = 0.0416426 Jy
! Total flux subtracted in 100 components = 0.0416426 Jy
! Clean residual min=-0.008319 max=0.018541 Jy/beam
! Clean residual mean=-0.000029 rms=0.002484 Jy/beam
! Combined flux in latest and established models = 0.298392 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 44 components and 0.298392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076079Jy  sigma=1.679061
! Fit after  self-cal, rms=0.075790Jy  sigma=1.672404
! Inverting map 
! Added new window around map position (-2.5, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175676 Jy
! Component: 100  -  total flux cleaned = 0.0291621 Jy
! Total flux subtracted in 100 components = 0.0291621 Jy
! Clean residual min=-0.006409 max=0.008204 Jy/beam
! Clean residual mean=-0.000020 rms=0.001829 Jy/beam
! Combined flux in latest and established models = 0.327554 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 62 components and 0.327554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069345Jy  sigma=1.520587
! Fit after  self-cal, rms=0.069158Jy  sigma=1.516061
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.956 mas, bmaj=5.237 mas, bpa=-18.35 degrees
! Estimated noise=0.385527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163609 Jy
! Component: 100  -  total flux cleaned = 0.0282351 Jy
! Component: 150  -  total flux cleaned = 0.0373223 Jy
! Component: 200  -  total flux cleaned = 0.0444073 Jy
! Total flux subtracted in 200 components = 0.0444073 Jy
! Clean residual min=-0.004658 max=0.006000 Jy/beam
! Clean residual mean=-0.000042 rms=0.001404 Jy/beam
! Combined flux in latest and established models = 0.371961 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 107 components and 0.371961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063983Jy  sigma=1.387400
! Fit after  self-cal, rms=0.063914Jy  sigma=1.385962
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.956 x 5.237 at -18.35 degrees (North through East)
! Clean map  min=-0.004568  max=0.15879 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        0.99     KP        0.95     
!   LA        0.95     NL        1.05     OV        0.98     PT        0.96     
!   SC        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        0.97     KP        0.92     LA        0.95     
!   MK        1.03     NL        0.98     OV        0.94     PT        0.91     
!   SC        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.97     KP        0.97     
!   LA        0.94     NL        1.03     OV        0.97     PT        0.95     
!   SC        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     HN        0.95     KP        0.94     LA        0.97     
!   MK        1.06     NL        0.97     OV        0.98     PT        0.93     
!   SC        1.16     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        0.98     
!   LA        0.97     NL        1.05     OV        1.01     PT        0.94     
!   SC        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.04     HN        0.99     KP        0.98     LA        0.98     
!   MK        1.04     NL        0.98     OV        0.95     PT        0.93     
!   SC        1.17     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        1.00     KP        0.96     
!   LA        0.95     NL        1.07     OV        1.02     PT        0.98     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     HN        1.01     KP        0.97     LA        1.01     
!   MK        1.08     NL        0.99     OV        0.91     PT        0.97     
!   SC        1.17     
! 
! 
! Fit before self-cal, rms=0.063914Jy  sigma=1.385962
! Fit after  self-cal, rms=0.062123Jy  sigma=1.338594
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.065 mas, bmaj=5.326 mas, bpa=-18.55 degrees
! Estimated noise=0.377934 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -12.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00436062 Jy
! Component: 100  -  total flux cleaned = 0.00572734 Jy
! Component: 150  -  total flux cleaned = 0.00625413 Jy
! Component: 200  -  total flux cleaned = 0.00662636 Jy
! Total flux subtracted in 200 components = 0.00662636 Jy
! Clean residual min=-0.002403 max=0.002408 Jy/beam
! Clean residual mean=-0.000003 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.378587 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 126 components and 0.378587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061797Jy  sigma=1.329645
! Fit after  self-cal, rms=0.061816Jy  sigma=1.328764
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061816Jy  sigma=1.328764
! Fit after  self-cal, rms=0.061782Jy  sigma=1.328348
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.061 mas, bmaj=5.318 mas, bpa=-18.57 degrees
! Estimated noise=0.37758 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020312 Jy
! Component: 100  -  total flux cleaned = 0.00270669 Jy
! Component: 150  -  total flux cleaned = 0.0030681 Jy
! Component: 200  -  total flux cleaned = 0.00337647 Jy
! Total flux subtracted in 200 components = 0.00337647 Jy
! Clean residual min=-0.002064 max=0.002218 Jy/beam
! Clean residual mean=-0.000001 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.381964 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 139 components and 0.381964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061696Jy  sigma=1.326045
! Fit after  self-cal, rms=0.061691Jy  sigma=1.325876
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000627378 Jy
! Component: 100  -  total flux cleaned = 0.000862223 Jy
! Component: 150  -  total flux cleaned = 0.000981756 Jy
! Component: 200  -  total flux cleaned = 0.00106574 Jy
! Total flux subtracted in 200 components = 0.00106574 Jy
! Clean residual min=-0.001998 max=0.002180 Jy/beam
! Clean residual mean=0.000000 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.383029 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 150 components and 0.38303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061659Jy  sigma=1.325154
! Fit after  self-cal, rms=0.061658Jy  sigma=1.325104
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061658Jy  sigma=1.325104
! Fit after  self-cal, rms=0.061727Jy  sigma=1.324824
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.063 mas, bmaj=5.313 mas, bpa=-18.56 degrees
! Estimated noise=0.377782 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105435 Jy
! Component: 100  -  total flux cleaned = 0.00137734 Jy
! Component: 150  -  total flux cleaned = 0.00154845 Jy
! Component: 200  -  total flux cleaned = 0.00167996 Jy
! Total flux subtracted in 200 components = 0.00167996 Jy
! Clean residual min=-0.002001 max=0.002116 Jy/beam
! Clean residual mean=-0.000001 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.384709 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 157 components and 0.38471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061697Jy  sigma=1.324139
! Fit after  self-cal, rms=0.061697Jy  sigma=1.324107
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249987 Jy
! Component: 100  -  total flux cleaned = 0.000396411 Jy
! Component: 150  -  total flux cleaned = 0.00048704 Jy
! Component: 200  -  total flux cleaned = 0.000571732 Jy
! Total flux subtracted in 200 components = 0.000571732 Jy
! Clean residual min=-0.001956 max=0.002095 Jy/beam
! Clean residual mean=-0.000000 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.385281 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 161 components and 0.385281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061680Jy  sigma=1.323761
! Fit after  self-cal, rms=0.061680Jy  sigma=1.323745
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061680Jy  sigma=1.323745
! Fit after  self-cal, rms=0.061740Jy  sigma=1.323620
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.398 mas, bmaj=9.477 mas, bpa=-31.57 degrees
! Estimated noise=0.455541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000641532 Jy
! Component: 100  -  total flux cleaned = 0.00102332 Jy
! Component: 150  -  total flux cleaned = 0.00124985 Jy
! Component: 200  -  total flux cleaned = 0.00134466 Jy
! Total flux subtracted in 200 components = 0.00134466 Jy
! Clean residual min=-0.002418 max=0.001934 Jy/beam
! Clean residual mean=-0.000000 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.386626 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 185 components and 0.386626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061732Jy  sigma=1.323407
! Fit after  self-cal, rms=0.061729Jy  sigma=1.323362
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110901 Jy
! Component: 100  -  total flux cleaned = 0.000163725 Jy
! Component: 150  -  total flux cleaned = 0.000213057 Jy
! Component: 200  -  total flux cleaned = 0.000259223 Jy
! Total flux subtracted in 200 components = 0.000259223 Jy
! Clean residual min=-0.002410 max=0.001960 Jy/beam
! Clean residual mean=-0.000000 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.386885 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 192 components and 0.386885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061726Jy  sigma=1.323307
! Fit after  self-cal, rms=0.061726Jy  sigma=1.323293
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.067 mas, bmaj=5.31 mas, bpa=-18.58 degrees
! Estimated noise=0.378052 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.067 x 5.31 at -18.58 degrees (North through East)
! Clean map  min=-0.0018073  max=0.15556 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.269 mas, bmaj=4.566 mas, bpa=-22.55 degrees
! Estimated noise=0.636554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12921 Jy
! Component: 100  -  total flux cleaned = 0.19326 Jy
! Component: 150  -  total flux cleaned = 0.234304 Jy
! Component: 200  -  total flux cleaned = 0.262312 Jy
! Total flux subtracted in 200 components = 0.262312 Jy
! Clean residual min=-0.009626 max=0.015718 Jy/beam
! Clean residual mean=-0.000034 rms=0.002688 Jy/beam
! Combined flux in latest and established models = 0.262312 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.262312 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.067 mas, bmaj=5.31 mas, bpa=-18.58 degrees
! Estimated noise=0.378052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0314526 Jy
! Component: 100  -  total flux cleaned = 0.0525307 Jy
! Component: 150  -  total flux cleaned = 0.0674712 Jy
! Component: 200  -  total flux cleaned = 0.0787546 Jy
! Total flux subtracted in 200 components = 0.0787546 Jy
! Clean residual min=-0.004624 max=0.006780 Jy/beam
! Clean residual mean=-0.000046 rms=0.001444 Jy/beam
! Combined flux in latest and established models = 0.341067 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 88 components and 0.341067 Jy
! Inverting map 
! Added new window around map position (-9, -14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0087874 Jy
! Component: 100  -  total flux cleaned = 0.0156601 Jy
! Component: 150  -  total flux cleaned = 0.0210867 Jy
! Component: 200  -  total flux cleaned = 0.0254292 Jy
! Total flux subtracted in 200 components = 0.0254292 Jy
! Clean residual min=-0.003052 max=0.003007 Jy/beam
! Clean residual mean=-0.000021 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.366496 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 137 components and 0.366496 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.398 mas, bmaj=9.477 mas, bpa=-31.57 degrees
! Estimated noise=0.455541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578498 Jy
! Component: 100  -  total flux cleaned = 0.00970229 Jy
! Component: 150  -  total flux cleaned = 0.0125159 Jy
! Component: 200  -  total flux cleaned = 0.0145898 Jy
! Total flux subtracted in 200 components = 0.0145898 Jy
! Clean residual min=-0.002455 max=0.002453 Jy/beam
! Clean residual mean=-0.000012 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.381086 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155382 Jy
! Component: 100  -  total flux cleaned = 0.00273247 Jy
! Component: 150  -  total flux cleaned = 0.00363799 Jy
! Component: 200  -  total flux cleaned = 0.00421107 Jy
! Total flux subtracted in 200 components = 0.00421107 Jy
! Clean residual min=-0.002398 max=0.002009 Jy/beam
! Clean residual mean=-0.000003 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.385297 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 224 components and 0.385297 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.067 mas, bmaj=5.31 mas, bpa=-18.58 degrees
! Estimated noise=0.378052 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028019 Jy
! Component: 100  -  total flux cleaned = 0.000695107 Jy
! Component: 150  -  total flux cleaned = 0.000860555 Jy
! Component: 200  -  total flux cleaned = 0.00101048 Jy
! Total flux subtracted in 200 components = 0.00101048 Jy
! Clean residual min=-0.002083 max=0.001996 Jy/beam
! Clean residual mean=-0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.386307 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 235 components and 0.386307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061749Jy  sigma=1.324058
! Fit after  self-cal, rms=0.061741Jy  sigma=1.323716
wmodel /J1110+4817_S_map.mod
! wmodel: Unable to open new model file: /J1110+4817_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1110+4817_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.067 x 5.31 at -18.58 degrees (North through East)
! Clean map  min=-0.0018813  max=0.15727 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1110+4817_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.157267 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000507199 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.967523 0.967523 1.93505 3.87009 7.74018 15.4804 30.9607 61.9214
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.157 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  310.07 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1110+4817_S_dfm.log closed on Thu May 19 18:36:01 2016