! Started logfile: /scr/pima/bg219e_uvs/J1051+4644_X_dfm.log on Thu May 19 18:35:17 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1051+4644_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1051+4644_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.785575 visibilities/baseline/integration-bin.
! Found source: J1051+4644
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24180 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1051+4644_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018264Jy  sigma=23.958293
! Fit after  self-cal, rms=0.856144Jy  sigma=20.119539
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7842 mas, bmaj=1.221 mas, bpa=-25.68 degrees
! Estimated noise=0.430162 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105026 Jy
! Component: 100  -  total flux cleaned = 0.133084 Jy
! Total flux subtracted in 100 components = 0.133084 Jy
! Clean residual min=-0.007001 max=0.013947 Jy/beam
! Clean residual mean=0.000012 rms=0.001640 Jy/beam
! Combined flux in latest and established models = 0.133084 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.133084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079221Jy  sigma=1.691952
! Fit after  self-cal, rms=0.079119Jy  sigma=1.690435
! Inverting map 
! Added new window around map position (2.4, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159473 Jy
! Component: 100  -  total flux cleaned = 0.0261873 Jy
! Total flux subtracted in 100 components = 0.0261873 Jy
! Clean residual min=-0.004605 max=0.010209 Jy/beam
! Clean residual mean=0.000007 rms=0.001153 Jy/beam
! Combined flux in latest and established models = 0.159271 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.159271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074085Jy  sigma=1.561360
! Fit after  self-cal, rms=0.073965Jy  sigma=1.558883
! Inverting map 
! Added new window around map position (4.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00972249 Jy
! Component: 100  -  total flux cleaned = 0.0158608 Jy
! Total flux subtracted in 100 components = 0.0158608 Jy
! Clean residual min=-0.003346 max=0.005383 Jy/beam
! Clean residual mean=0.000005 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.175132 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.175132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072185Jy  sigma=1.512012
! Fit after  self-cal, rms=0.072058Jy  sigma=1.508631
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=1.471 mas, bpa=-21.74 degrees
! Estimated noise=0.199875 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00797263 Jy
! Component: 100  -  total flux cleaned = 0.0131451 Jy
! Component: 150  -  total flux cleaned = 0.0166515 Jy
! Component: 200  -  total flux cleaned = 0.0191158 Jy
! Total flux subtracted in 200 components = 0.0191158 Jy
! Clean residual min=-0.002405 max=0.003721 Jy/beam
! Clean residual mean=0.000009 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.194248 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 46 components and 0.194248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071032Jy  sigma=1.482011
! Fit after  self-cal, rms=0.070939Jy  sigma=1.479487
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.065 x 1.471 at -21.74 degrees (North through East)
! Clean map  min=-0.0021472  max=0.14148 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.99     KP        0.98     
!   LA        0.98     MK        0.93     NL        1.02     OV        1.02     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.96     
!   LA        0.97     MK        0.93     NL        1.01     OV        1.05     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.01     KP        0.97     
!   LA        0.95     MK        0.97     NL        1.00     OV        1.06     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.96     MK        1.00     NL        1.01     OV        1.06     
!   PT        0.96     SC        1.09     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        0.98     
!   LA        0.97     MK        0.99     NL        0.98     OV        1.03     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.02     KP        0.97     
!   LA        0.96     MK        0.98     NL        1.01     OV        1.05     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.98     KP        0.96     
!   LA        0.96     MK        1.05     NL        1.02     OV        1.04     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.96     MK        0.99     NL        1.01     OV        1.03     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.99     KP        1.00     
!   LA        0.97     MK        0.98     NL        0.98     OV        1.02     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.95     KP        0.99     
!   LA        0.95     MK        1.00     NL        1.03     OV        1.06     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        1.01     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.02     KP        0.99     
!   LA        0.97     MK        1.00     NL        0.99     OV        1.03     
!   PT        0.96     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.070939Jy  sigma=1.479487
! Fit after  self-cal, rms=0.069891Jy  sigma=1.471962
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=1.485 mas, bpa=-22.52 degrees
! Estimated noise=0.198944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104104 Jy
! Component: 100  -  total flux cleaned = 0.00123354 Jy
! Component: 150  -  total flux cleaned = 0.00138466 Jy
! Component: 200  -  total flux cleaned = 0.00141357 Jy
! Total flux subtracted in 200 components = 0.00141357 Jy
! Clean residual min=-0.001711 max=0.001795 Jy/beam
! Clean residual mean=-0.000002 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.195662 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 56 components and 0.195662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069832Jy  sigma=1.470595
! Fit after  self-cal, rms=0.069819Jy  sigma=1.470048
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069819Jy  sigma=1.470048
! Fit after  self-cal, rms=0.069783Jy  sigma=1.466862
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.07 mas, bmaj=1.473 mas, bpa=-22.06 degrees
! Estimated noise=0.198955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000862367 Jy
! Component: 100  -  total flux cleaned = 0.00105404 Jy
! Component: 150  -  total flux cleaned = 0.00113741 Jy
! Component: 200  -  total flux cleaned = 0.00117302 Jy
! Total flux subtracted in 200 components = 0.00117302 Jy
! Clean residual min=-0.001593 max=0.001669 Jy/beam
! Clean residual mean=0.000000 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.196835 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.196835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069758Jy  sigma=1.466390
! Fit after  self-cal, rms=0.069760Jy  sigma=1.466189
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.8, -4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000857925 Jy
! Component: 100  -  total flux cleaned = 0.00105563 Jy
! Component: 150  -  total flux cleaned = 0.00128091 Jy
! Component: 200  -  total flux cleaned = 0.00142888 Jy
! Total flux subtracted in 200 components = 0.00142888 Jy
! Clean residual min=-0.001545 max=0.001425 Jy/beam
! Clean residual mean=0.000000 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.198263 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.198263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069715Jy  sigma=1.465489
! Fit after  self-cal, rms=0.069709Jy  sigma=1.465444
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069709Jy  sigma=1.465444
! Fit after  self-cal, rms=0.069805Jy  sigma=1.465368
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.07 mas, bmaj=1.471 mas, bpa=-22.03 degrees
! Estimated noise=0.199303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000657161 Jy
! Component: 100  -  total flux cleaned = 0.000748214 Jy
! Component: 150  -  total flux cleaned = 0.000828477 Jy
! Component: 200  -  total flux cleaned = 0.000901898 Jy
! Total flux subtracted in 200 components = 0.000901898 Jy
! Clean residual min=-0.001552 max=0.001411 Jy/beam
! Clean residual mean=0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.199165 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 92 components and 0.199165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069789Jy  sigma=1.465126
! Fit after  self-cal, rms=0.069787Jy  sigma=1.465106
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024619 Jy
! Component: 100  -  total flux cleaned = 0.000312242 Jy
! Component: 150  -  total flux cleaned = 0.000404484 Jy
! Component: 200  -  total flux cleaned = 0.000433166 Jy
! Total flux subtracted in 200 components = 0.000433166 Jy
! Clean residual min=-0.001522 max=0.001426 Jy/beam
! Clean residual mean=0.000000 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.199599 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 97 components and 0.199599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069777Jy  sigma=1.464987
! Fit after  self-cal, rms=0.069776Jy  sigma=1.464980
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069776Jy  sigma=1.464980
! Fit after  self-cal, rms=0.069886Jy  sigma=1.464949
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.341 mas, bmaj=2.493 mas, bpa=-18.49 degrees
! Estimated noise=0.244283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000732917 Jy
! Component: 100  -  total flux cleaned = 0.000923678 Jy
! Component: 150  -  total flux cleaned = 0.00101082 Jy
! Component: 200  -  total flux cleaned = 0.00105311 Jy
! Total flux subtracted in 200 components = 0.00105311 Jy
! Clean residual min=-0.001688 max=0.001587 Jy/beam
! Clean residual mean=0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.200652 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 106 components and 0.200652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069884Jy  sigma=1.464962
! Fit after  self-cal, rms=0.069882Jy  sigma=1.464935
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000201425 Jy
! Component: 100  -  total flux cleaned = 0.000201149 Jy
! Component: 150  -  total flux cleaned = 0.000201201 Jy
! Component: 200  -  total flux cleaned = 0.000215777 Jy
! Total flux subtracted in 200 components = 0.000215777 Jy
! Clean residual min=-0.001674 max=0.001609 Jy/beam
! Clean residual mean=0.000001 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.200867 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 109 components and 0.200867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069880Jy  sigma=1.464955
! Fit after  self-cal, rms=0.069879Jy  sigma=1.464956
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.071 mas, bmaj=1.471 mas, bpa=-22.01 degrees
! Estimated noise=0.199628 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.071 x 1.471 at -22.01 degrees (North through East)
! Clean map  min=-0.0013717  max=0.14025 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.787 mas, bmaj=1.22 mas, bpa=-25.88 degrees
! Estimated noise=0.432223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105163 Jy
! Component: 100  -  total flux cleaned = 0.133613 Jy
! Component: 150  -  total flux cleaned = 0.150752 Jy
! Component: 200  -  total flux cleaned = 0.162626 Jy
! Total flux subtracted in 200 components = 0.162626 Jy
! Clean residual min=-0.004270 max=0.006601 Jy/beam
! Clean residual mean=0.000005 rms=0.001012 Jy/beam
! Combined flux in latest and established models = 0.162626 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.162626 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.071 mas, bmaj=1.471 mas, bpa=-22.01 degrees
! Estimated noise=0.199628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125279 Jy
! Component: 100  -  total flux cleaned = 0.0203114 Jy
! Component: 150  -  total flux cleaned = 0.0253667 Jy
! Component: 200  -  total flux cleaned = 0.0286833 Jy
! Total flux subtracted in 200 components = 0.0286833 Jy
! Clean residual min=-0.001683 max=0.002307 Jy/beam
! Clean residual mean=0.000005 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.191309 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 32 components and 0.191309 Jy
! Inverting map 
! Added new window around map position (5.4, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241767 Jy
! Component: 100  -  total flux cleaned = 0.00419779 Jy
! Component: 150  -  total flux cleaned = 0.00563011 Jy
! Component: 200  -  total flux cleaned = 0.00661727 Jy
! Total flux subtracted in 200 components = 0.00661727 Jy
! Clean residual min=-0.001541 max=0.001416 Jy/beam
! Clean residual mean=0.000002 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.197926 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 52 components and 0.197926 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.341 mas, bmaj=2.493 mas, bpa=-18.49 degrees
! Estimated noise=0.244283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129215 Jy
! Component: 100  -  total flux cleaned = 0.00199549 Jy
! Component: 150  -  total flux cleaned = 0.00233938 Jy
! Component: 200  -  total flux cleaned = 0.00251834 Jy
! Total flux subtracted in 200 components = 0.00251834 Jy
! Clean residual min=-0.001727 max=0.001583 Jy/beam
! Clean residual mean=0.000001 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.200445 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116191 Jy
! Component: 100  -  total flux cleaned = 0.000202744 Jy
! Component: 150  -  total flux cleaned = 0.000250081 Jy
! Component: 200  -  total flux cleaned = 0.000307997 Jy
! Total flux subtracted in 200 components = 0.000307997 Jy
! Clean residual min=-0.001667 max=0.001604 Jy/beam
! Clean residual mean=0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.200753 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 93 components and 0.200753 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.071 mas, bmaj=1.471 mas, bpa=-22.01 degrees
! Estimated noise=0.199628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012596 Jy
! Component: 100  -  total flux cleaned = -0.000178394 Jy
! Component: 150  -  total flux cleaned = -0.000156775 Jy
! Component: 200  -  total flux cleaned = -0.000156191 Jy
! Total flux subtracted in 200 components = -0.000156191 Jy
! Clean residual min=-0.001425 max=0.001514 Jy/beam
! Clean residual mean=0.000001 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.200597 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 109 components and 0.200597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069875Jy  sigma=1.464810
! Fit after  self-cal, rms=0.069875Jy  sigma=1.464714
wmodel /J1051+4644_X_map.mod
! wmodel: Unable to open new model file: /J1051+4644_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1051+4644_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.071 x 1.471 at -22.01 degrees (North through East)
! Clean map  min=-0.0013295  max=0.14056 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1051+4644_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.140556 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00032673 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.697365 0.697365 1.39473 2.78946 5.57892 11.1578 22.3157 44.6313 89.2627
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  430.191 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1051+4644_X_dfm.log closed on Thu May 19 18:35:20 2016