! Started logfile: /scr/pima/bg219e_uvs/J1041+523A_X_dfm.log on Thu May 19 18:35:01 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1041+523A_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1041+523A_X_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J1041+523A
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 6912 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1041+523A_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.139929Jy  sigma=23.223116
! Fit after  self-cal, rms=0.533577Jy  sigma=11.235256
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7846 mas, bmaj=1.167 mas, bpa=-29.6 degrees
! Estimated noise=0.665349 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.33881 Jy
! Component: 100  -  total flux cleaned = 0.480744 Jy
! Total flux subtracted in 100 components = 0.480744 Jy
! Clean residual min=-0.027896 max=0.070271 Jy/beam
! Clean residual mean=0.000102 rms=0.007099 Jy/beam
! Combined flux in latest and established models = 0.480744 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.480744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.165598Jy  sigma=3.281348
! Fit after  self-cal, rms=0.164078Jy  sigma=3.251275
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0824516 Jy
! Component: 100  -  total flux cleaned = 0.129405 Jy
! Total flux subtracted in 100 components = 0.129405 Jy
! Clean residual min=-0.015046 max=0.031045 Jy/beam
! Clean residual mean=0.000045 rms=0.003303 Jy/beam
! Combined flux in latest and established models = 0.61015 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.61015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091031Jy  sigma=1.795487
! Fit after  self-cal, rms=0.090274Jy  sigma=1.781094
! Inverting map 
! Added new window around map position (-0.4, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0333714 Jy
! Component: 100  -  total flux cleaned = 0.0521389 Jy
! Total flux subtracted in 100 components = 0.0521389 Jy
! Clean residual min=-0.010759 max=0.011449 Jy/beam
! Clean residual mean=0.000023 rms=0.002054 Jy/beam
! Combined flux in latest and established models = 0.662289 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.662289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073193Jy  sigma=1.428161
! Fit after  self-cal, rms=0.072703Jy  sigma=1.417109
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131363 Jy
! Component: 100  -  total flux cleaned = 0.0216495 Jy
! Total flux subtracted in 100 components = 0.0216495 Jy
! Clean residual min=-0.009240 max=0.008888 Jy/beam
! Clean residual mean=0.000014 rms=0.001721 Jy/beam
! Combined flux in latest and established models = 0.683938 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.683938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069702Jy  sigma=1.351643
! Fit after  self-cal, rms=0.069619Jy  sigma=1.349560
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.445 mas, bpa=-28.51 degrees
! Estimated noise=0.425866 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00748254 Jy
! Component: 100  -  total flux cleaned = 0.0119353 Jy
! Component: 150  -  total flux cleaned = 0.0146943 Jy
! Component: 200  -  total flux cleaned = 0.0151288 Jy
! Total flux subtracted in 200 components = 0.0151288 Jy
! Clean residual min=-0.006695 max=0.007743 Jy/beam
! Clean residual mean=0.000031 rms=0.001539 Jy/beam
! Combined flux in latest and established models = 0.699067 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.699067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068836Jy  sigma=1.329201
! Fit after  self-cal, rms=0.068807Jy  sigma=1.328466
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 1.445 at -28.51 degrees (North through East)
! Clean map  min=-0.0062855  max=0.4578 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.98     KP        0.99     
!   LA        0.99     MK        0.92     NL        1.02     OV        0.98     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        0.99     
!   LA        1.00     MK        0.93     NL        1.03     OV        1.00     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.97     MK        0.97     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.98     KP        1.00     
!   LA        0.97     MK        0.90     NL        1.02     OV        1.00     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.97     KP        1.00     
!   LA        0.98     MK        0.95     NL        1.02     OV        1.00     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.01     SC        1.08     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.97     MK        0.95     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.98     MK        0.91     NL        1.02     OV        0.98     
!   PT        0.97     SC        1.09     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.99     MK        0.98     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.10     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.06     
! 
! 
! Fit before self-cal, rms=0.068807Jy  sigma=1.328466
! Fit after  self-cal, rms=0.066627Jy  sigma=1.281867
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.466 mas, bpa=-29.37 degrees
! Estimated noise=0.425332 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00499945 Jy
! Component: 100  -  total flux cleaned = -0.00622429 Jy
! Component: 150  -  total flux cleaned = -0.00668235 Jy
! Component: 200  -  total flux cleaned = -0.00698631 Jy
! Total flux subtracted in 200 components = -0.00698631 Jy
! Clean residual min=-0.005215 max=0.005435 Jy/beam
! Clean residual mean=0.000014 rms=0.001130 Jy/beam
! Combined flux in latest and established models = 0.692081 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.692081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066071Jy  sigma=1.271294
! Fit after  self-cal, rms=0.066066Jy  sigma=1.270716
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066066Jy  sigma=1.270716
! Fit after  self-cal, rms=0.065047Jy  sigma=1.245219
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=1.454 mas, bpa=-28.9 degrees
! Estimated noise=0.424781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00354476 Jy
! Component: 100  -  total flux cleaned = -0.0038122 Jy
! Component: 150  -  total flux cleaned = -0.00395501 Jy
! Component: 200  -  total flux cleaned = -0.00395497 Jy
! Total flux subtracted in 200 components = -0.00395497 Jy
! Clean residual min=-0.004241 max=0.005245 Jy/beam
! Clean residual mean=0.000004 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.688126 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.688126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064767Jy  sigma=1.239778
! Fit after  self-cal, rms=0.064769Jy  sigma=1.239200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184543 Jy
! Component: 100  -  total flux cleaned = 0.00239947 Jy
! Component: 150  -  total flux cleaned = 0.002586 Jy
! Component: 200  -  total flux cleaned = 0.00275484 Jy
! Total flux subtracted in 200 components = 0.00275484 Jy
! Clean residual min=-0.003546 max=0.003695 Jy/beam
! Clean residual mean=0.000002 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.690881 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 0.690881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064376Jy  sigma=1.229658
! Fit after  self-cal, rms=0.064338Jy  sigma=1.229092
! Inverting map 
! Added new window around map position (-30.4, 32).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155737 Jy
! Component: 100  -  total flux cleaned = 0.00204612 Jy
! Component: 150  -  total flux cleaned = 0.00212861 Jy
! Component: 200  -  total flux cleaned = 0.00234345 Jy
! Total flux subtracted in 200 components = 0.00234345 Jy
! Clean residual min=-0.003017 max=0.003084 Jy/beam
! Clean residual mean=0.000004 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.693224 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 76 components and 0.693224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064067Jy  sigma=1.223068
! Fit after  self-cal, rms=0.064052Jy  sigma=1.222792
! Inverting map 
! Added new window around map position (42.4, -50.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253534 Jy
! Component: 100  -  total flux cleaned = 0.00294758 Jy
! Component: 150  -  total flux cleaned = 0.00312761 Jy
! Component: 200  -  total flux cleaned = 0.00329597 Jy
! Total flux subtracted in 200 components = 0.00329597 Jy
! Clean residual min=-0.002730 max=0.002775 Jy/beam
! Clean residual mean=0.000003 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.69652 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 90 components and 0.69652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063890Jy  sigma=1.219514
! Fit after  self-cal, rms=0.063883Jy  sigma=1.219387
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063883Jy  sigma=1.219387
! Fit after  self-cal, rms=0.063847Jy  sigma=1.218124
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=1.454 mas, bpa=-28.85 degrees
! Estimated noise=0.424459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202141 Jy
! Component: 100  -  total flux cleaned = 2.72822e-05 Jy
! Component: 150  -  total flux cleaned = 7.8304e-05 Jy
! Component: 200  -  total flux cleaned = 2.98599e-05 Jy
! Total flux subtracted in 200 components = 2.98599e-05 Jy
! Clean residual min=-0.002368 max=0.002637 Jy/beam
! Clean residual mean=-0.000000 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.69655 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 103 components and 0.69655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063749Jy  sigma=1.216220
! Fit after  self-cal, rms=0.063751Jy  sigma=1.216181
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012507 Jy
! Component: 100  -  total flux cleaned = 0.000125556 Jy
! Component: 150  -  total flux cleaned = 0.000125852 Jy
! Component: 200  -  total flux cleaned = 0.00012624 Jy
! Total flux subtracted in 200 components = 0.00012624 Jy
! Clean residual min=-0.002321 max=0.002577 Jy/beam
! Clean residual mean=-0.000000 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.696676 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 109 components and 0.696676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063701Jy  sigma=1.215151
! Fit after  self-cal, rms=0.063702Jy  sigma=1.215126
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063702Jy  sigma=1.215126
! Fit after  self-cal, rms=0.063693Jy  sigma=1.214916
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.272 mas, bmaj=2.475 mas, bpa=-30.83 degrees
! Estimated noise=0.549873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00163286 Jy
! Component: 100  -  total flux cleaned = -0.00242017 Jy
! Component: 150  -  total flux cleaned = -0.0027139 Jy
! Component: 200  -  total flux cleaned = -0.00287718 Jy
! Total flux subtracted in 200 components = -0.00287718 Jy
! Clean residual min=-0.003222 max=0.003393 Jy/beam
! Clean residual mean=-0.000000 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.693799 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.693799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063670Jy  sigma=1.214651
! Fit after  self-cal, rms=0.063669Jy  sigma=1.214580
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000391379 Jy
! Component: 100  -  total flux cleaned = -0.00053179 Jy
! Component: 150  -  total flux cleaned = -0.000553067 Jy
! Component: 200  -  total flux cleaned = -0.000612669 Jy
! Total flux subtracted in 200 components = -0.000612669 Jy
! Clean residual min=-0.003129 max=0.003333 Jy/beam
! Clean residual mean=0.000001 rms=0.000846 Jy/beam
! Combined flux in latest and established models = 0.693186 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 133 components and 0.693186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063664Jy  sigma=1.214539
! Fit after  self-cal, rms=0.063664Jy  sigma=1.214528
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.454 mas, bpa=-28.81 degrees
! Estimated noise=0.42437 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 1.454 at -28.81 degrees (North through East)
! Clean map  min=-0.0028593  max=0.45735 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7817 mas, bmaj=1.176 mas, bpa=-29.96 degrees
! Estimated noise=0.664622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.343564 Jy
! Component: 100  -  total flux cleaned = 0.486185 Jy
! Component: 150  -  total flux cleaned = 0.562517 Jy
! Component: 200  -  total flux cleaned = 0.608187 Jy
! Total flux subtracted in 200 components = 0.608187 Jy
! Clean residual min=-0.010742 max=0.023493 Jy/beam
! Clean residual mean=0.000035 rms=0.002647 Jy/beam
! Combined flux in latest and established models = 0.608186 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.608186 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.454 mas, bpa=-28.81 degrees
! Estimated noise=0.42437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0364364 Jy
! Component: 100  -  total flux cleaned = 0.0544433 Jy
! Component: 150  -  total flux cleaned = 0.0648363 Jy
! Component: 200  -  total flux cleaned = 0.0718264 Jy
! Total flux subtracted in 200 components = 0.0718264 Jy
! Clean residual min=-0.004053 max=0.004124 Jy/beam
! Clean residual mean=0.000011 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.680013 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 30 components and 0.680013 Jy
! Inverting map 
! Added new window around map position (-4, -11.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00512795 Jy
! Component: 100  -  total flux cleaned = 0.00840039 Jy
! Component: 150  -  total flux cleaned = 0.0101868 Jy
! Component: 200  -  total flux cleaned = 0.0113737 Jy
! Total flux subtracted in 200 components = 0.0113737 Jy
! Clean residual min=-0.003326 max=0.003230 Jy/beam
! Clean residual mean=0.000002 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.691386 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 45 components and 0.691386 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.272 mas, bmaj=2.475 mas, bpa=-30.83 degrees
! Estimated noise=0.549873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270251 Jy
! Component: 100  -  total flux cleaned = 0.00319273 Jy
! Component: 150  -  total flux cleaned = 0.00347571 Jy
! Component: 200  -  total flux cleaned = 0.00376865 Jy
! Total flux subtracted in 200 components = 0.00376865 Jy
! Clean residual min=-0.003116 max=0.003007 Jy/beam
! Clean residual mean=-0.000002 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.695155 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129121 Jy
! Component: 100  -  total flux cleaned = 0.000207436 Jy
! Component: 150  -  total flux cleaned = 0.000280656 Jy
! Component: 200  -  total flux cleaned = 0.000348642 Jy
! Total flux subtracted in 200 components = 0.000348642 Jy
! Clean residual min=-0.003066 max=0.003048 Jy/beam
! Clean residual mean=-0.000002 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.695504 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 86 components and 0.695504 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.454 mas, bpa=-28.81 degrees
! Estimated noise=0.42437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243928 Jy
! Component: 100  -  total flux cleaned = 0.000338017 Jy
! Component: 150  -  total flux cleaned = 0.00068748 Jy
! Component: 200  -  total flux cleaned = 0.000928 Jy
! Total flux subtracted in 200 components = 0.000928 Jy
! Clean residual min=-0.003231 max=0.003033 Jy/beam
! Clean residual mean=-0.000003 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.696432 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 108 components and 0.696432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063900Jy  sigma=1.221233
! Fit after  self-cal, rms=0.063867Jy  sigma=1.219292
wmodel /J1041+523A_X_map.mod
! wmodel: Unable to open new model file: /J1041+523A_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1041+523A_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 1.454 at -28.81 degrees (North through East)
! Clean map  min=-0.0025937  max=0.45619 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1041+523A_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.456189 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000630306 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.414503 0.414503 0.829007 1.65801 3.31603 6.63205 13.2641 26.5282 53.0564
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.456 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  723.757 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1041+523A_X_dfm.log closed on Thu May 19 18:35:04 2016