! Started logfile: /scr/pima/bg219e_uvs/J1038+4244_X_uvs.log on Thu Apr  7 09:05:58 2016
obs /scr/pima/bg219e_uvs/J1038+4244_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1038+4244_X_uva.fits
! AN table 1: 24 integrations on 28 of 28 possible baselines.
! AN table 2: 24 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.917969 visibilities/baseline/integration-bin.
! Found source: J1038+4244
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16920 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1038+4244_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.062245Jy  sigma=24.301032
! Fit after  self-cal, rms=0.647762Jy  sigma=14.767429
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8144 mas, bmaj=1.17 mas, bpa=-29.3 degrees
! Estimated noise=0.621003 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.267533 Jy
! Component: 100  -  total flux cleaned = 0.333509 Jy
! Total flux subtracted in 100 components = 0.333509 Jy
! Clean residual min=-0.012659 max=0.025409 Jy/beam
! Clean residual mean=0.000023 rms=0.003363 Jy/beam
! Combined flux in latest and established models = 0.333509 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.333509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075901Jy  sigma=1.701562
! Fit after  self-cal, rms=0.075705Jy  sigma=1.697147
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278808 Jy
! Component: 100  -  total flux cleaned = 0.0424016 Jy
! Total flux subtracted in 100 components = 0.0424016 Jy
! Clean residual min=-0.008068 max=0.011604 Jy/beam
! Clean residual mean=0.000008 rms=0.001870 Jy/beam
! Combined flux in latest and established models = 0.375911 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 9 components and 0.375911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063381Jy  sigma=1.395374
! Fit after  self-cal, rms=0.063320Jy  sigma=1.393917
! Inverting map 
! Added new window around map position (1.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106165 Jy
! Component: 100  -  total flux cleaned = 0.0159376 Jy
! Total flux subtracted in 100 components = 0.0159376 Jy
! Clean residual min=-0.007485 max=0.007761 Jy/beam
! Clean residual mean=0.000002 rms=0.001516 Jy/beam
! Combined flux in latest and established models = 0.391849 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.391849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061631Jy  sigma=1.356123
! Fit after  self-cal, rms=0.061545Jy  sigma=1.353898
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.073 mas, bmaj=1.504 mas, bpa=-30.08 degrees
! Estimated noise=0.31709 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00527858 Jy
! Component: 100  -  total flux cleaned = 0.00672449 Jy
! Component: 150  -  total flux cleaned = 0.00720825 Jy
! Component: 200  -  total flux cleaned = 0.00728558 Jy
! Total flux subtracted in 200 components = 0.00728558 Jy
! Clean residual min=-0.005532 max=0.006139 Jy/beam
! Clean residual mean=0.000000 rms=0.001210 Jy/beam
! Combined flux in latest and established models = 0.399134 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.399134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061032Jy  sigma=1.341663
! Fit after  self-cal, rms=0.061018Jy  sigma=1.341401
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.073 x 1.504 at -30.08 degrees (North through East)
! Clean map  min=-0.0051329  max=0.33815 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     KP        0.98     LA        1.00     
!   NL        0.96     OV        1.01     PT        1.00     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.02     KP        1.00     LA        1.01     
!   MK        0.96     NL        1.03     OV        1.00     PT        0.99     
!   SC        1.13     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     KP        1.01     LA        0.99     
!   NL        0.98     OV        0.99     PT        0.99     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.03     HN        1.01     KP        1.00     LA        1.00     
!   MK        0.96     NL        1.04     OV        0.99     PT        0.98     
!   SC        1.12     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     KP        1.00     LA        0.97     
!   NL        0.96     OV        1.01     PT        1.00     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.01     KP        0.98     LA        0.98     
!   MK        0.99     NL        1.02     OV        1.00     PT        0.97     
!   SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     KP        0.99     LA        0.99     
!   NL        0.97     OV        0.99     PT        0.98     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     HN        1.02     KP        0.99     LA        0.98     
!   MK        0.99     NL        1.04     OV        0.98     PT        0.98     
!   SC        1.11     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     KP        0.99     LA        0.97     
!   NL        0.96     OV        0.99     PT        0.98     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     HN        1.01     KP        0.99     LA        0.99     
!   MK        0.98     NL        1.03     OV        0.99     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     KP        0.97     LA        0.98     
!   NL        0.98     OV        0.99     PT        1.03     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.03     HN        1.03     KP        0.99     LA        1.00     
!   MK        1.04     NL        1.02     OV        0.98     PT        0.99     
!   SC        1.10     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     KP        0.98     LA        0.99     
!   NL        0.95     OV        0.99     PT        1.00     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     HN        1.02     KP        1.00     LA        0.99     
!   MK        1.00     NL        1.01     OV        0.99     PT        0.98     
!   SC        1.11     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061018Jy  sigma=1.341401
! Fit after  self-cal, rms=0.060419Jy  sigma=1.303406
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.08 mas, bmaj=1.504 mas, bpa=-30.04 degrees
! Estimated noise=0.318452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00180034 Jy
! Component: 100  -  total flux cleaned = -0.0021406 Jy
! Component: 150  -  total flux cleaned = -0.00235927 Jy
! Component: 200  -  total flux cleaned = -0.00245578 Jy
! Total flux subtracted in 200 components = -0.00245578 Jy
! Clean residual min=-0.003136 max=0.003219 Jy/beam
! Clean residual mean=-0.000000 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.396678 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.396678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060270Jy  sigma=1.299754
! Fit after  self-cal, rms=0.060271Jy  sigma=1.299371
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060271Jy  sigma=1.299371
! Fit after  self-cal, rms=0.060349Jy  sigma=1.299132
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=1.504 mas, bpa=-30.03 degrees
! Estimated noise=0.318521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000762685 Jy
! Component: 100  -  total flux cleaned = -0.00110642 Jy
! Component: 150  -  total flux cleaned = -0.00126226 Jy
! Component: 200  -  total flux cleaned = -0.00133208 Jy
! Total flux subtracted in 200 components = -0.00133208 Jy
! Clean residual min=-0.002947 max=0.003138 Jy/beam
! Clean residual mean=-0.000000 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.395346 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.395346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060278Jy  sigma=1.297431
! Fit after  self-cal, rms=0.060269Jy  sigma=1.297251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.4, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240811 Jy
! Component: 100  -  total flux cleaned = 0.00249655 Jy
! Component: 150  -  total flux cleaned = 0.00237172 Jy
! Component: 200  -  total flux cleaned = 0.00225909 Jy
! Total flux subtracted in 200 components = 0.00225909 Jy
! Clean residual min=-0.002811 max=0.002982 Jy/beam
! Clean residual mean=-0.000001 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.397605 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.397605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060064Jy  sigma=1.293322
! Fit after  self-cal, rms=0.060049Jy  sigma=1.292957
! Inverting map 
! Added new window around map position (-6.2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264228 Jy
! Component: 100  -  total flux cleaned = 0.0033488 Jy
! Component: 150  -  total flux cleaned = 0.00386672 Jy
! Component: 200  -  total flux cleaned = 0.00426759 Jy
! Total flux subtracted in 200 components = 0.00426759 Jy
! Clean residual min=-0.002327 max=0.002309 Jy/beam
! Clean residual mean=-0.000000 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.401873 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 66 components and 0.401873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059880Jy  sigma=1.289487
! Fit after  self-cal, rms=0.059876Jy  sigma=1.289367
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059876Jy  sigma=1.289367
! Fit after  self-cal, rms=0.059850Jy  sigma=1.289101
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=1.504 mas, bpa=-30.06 degrees
! Estimated noise=0.318518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000487561 Jy
! Component: 100  -  total flux cleaned = 0.000577585 Jy
! Component: 150  -  total flux cleaned = 0.000619829 Jy
! Component: 200  -  total flux cleaned = 0.000697355 Jy
! Total flux subtracted in 200 components = 0.000697355 Jy
! Clean residual min=-0.002098 max=0.002196 Jy/beam
! Clean residual mean=0.000000 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.40257 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 74 components and 0.40257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059788Jy  sigma=1.287877
! Fit after  self-cal, rms=0.059786Jy  sigma=1.287848
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.4, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189605 Jy
! Component: 100  -  total flux cleaned = 0.0021336 Jy
! Component: 150  -  total flux cleaned = 0.00237846 Jy
! Component: 200  -  total flux cleaned = 0.00263564 Jy
! Total flux subtracted in 200 components = 0.00263564 Jy
! Clean residual min=-0.001816 max=0.001842 Jy/beam
! Clean residual mean=-0.000001 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.405206 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 89 components and 0.405206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059666Jy  sigma=1.285541
! Fit after  self-cal, rms=0.059663Jy  sigma=1.285452
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059663Jy  sigma=1.285452
! Fit after  self-cal, rms=0.059591Jy  sigma=1.285305
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.445 mas, bmaj=2.982 mas, bpa=-55.9 degrees
! Estimated noise=0.383112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000600616 Jy
! Component: 100  -  total flux cleaned = 0.00101026 Jy
! Component: 150  -  total flux cleaned = 0.00124872 Jy
! Component: 200  -  total flux cleaned = 0.00150591 Jy
! Total flux subtracted in 200 components = 0.00150591 Jy
! Clean residual min=-0.001792 max=0.001472 Jy/beam
! Clean residual mean=-0.000000 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.406712 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 100 components and 0.406712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059563Jy  sigma=1.284774
! Fit after  self-cal, rms=0.059560Jy  sigma=1.284746
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.19411e-05 Jy
! Component: 100  -  total flux cleaned = 0.000246919 Jy
! Component: 150  -  total flux cleaned = 0.000358696 Jy
! Component: 200  -  total flux cleaned = 0.000460306 Jy
! Total flux subtracted in 200 components = 0.000460306 Jy
! Clean residual min=-0.001674 max=0.001387 Jy/beam
! Clean residual mean=-0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.407172 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 106 components and 0.407172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059549Jy  sigma=1.284547
! Fit after  self-cal, rms=0.059548Jy  sigma=1.284537
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=1.503 mas, bpa=-30.05 degrees
! Estimated noise=0.318502 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.082 x 1.503 at -30.05 degrees (North through East)
! Clean map  min=-0.0022219  max=0.34003 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8205 mas, bmaj=1.167 mas, bpa=-29.26 degrees
! Estimated noise=0.625652 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.269291 Jy
! Component: 100  -  total flux cleaned = 0.337896 Jy
! Component: 150  -  total flux cleaned = 0.363608 Jy
! Component: 200  -  total flux cleaned = 0.37738 Jy
! Total flux subtracted in 200 components = 0.37738 Jy
! Clean residual min=-0.005694 max=0.007039 Jy/beam
! Clean residual mean=0.000006 rms=0.001359 Jy/beam
! Combined flux in latest and established models = 0.37738 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.37738 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=1.503 mas, bpa=-30.05 degrees
! Estimated noise=0.318502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00925922 Jy
! Component: 100  -  total flux cleaned = 0.0145827 Jy
! Component: 150  -  total flux cleaned = 0.0184225 Jy
! Component: 200  -  total flux cleaned = 0.0215206 Jy
! Total flux subtracted in 200 components = 0.0215206 Jy
! Clean residual min=-0.002768 max=0.003274 Jy/beam
! Clean residual mean=0.000001 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.3989 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 33 components and 0.3989 Jy
! Inverting map 
! Added new window around map position (-1.6, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258484 Jy
! Component: 100  -  total flux cleaned = 0.00367922 Jy
! Component: 150  -  total flux cleaned = 0.0042446 Jy
! Component: 200  -  total flux cleaned = 0.00476123 Jy
! Total flux subtracted in 200 components = 0.00476123 Jy
! Clean residual min=-0.002429 max=0.002267 Jy/beam
! Clean residual mean=0.000001 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.403662 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 55 components and 0.403662 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.445 mas, bmaj=2.982 mas, bpa=-55.9 degrees
! Estimated noise=0.383112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164619 Jy
! Component: 100  -  total flux cleaned = 0.00237976 Jy
! Component: 150  -  total flux cleaned = 0.00301265 Jy
! Component: 200  -  total flux cleaned = 0.00326146 Jy
! Total flux subtracted in 200 components = 0.00326146 Jy
! Clean residual min=-0.001872 max=0.001634 Jy/beam
! Clean residual mean=0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.406923 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224824 Jy
! Component: 100  -  total flux cleaned = 0.000342573 Jy
! Component: 150  -  total flux cleaned = 0.000397322 Jy
! Component: 200  -  total flux cleaned = 0.00042336 Jy
! Total flux subtracted in 200 components = 0.00042336 Jy
! Clean residual min=-0.001755 max=0.001517 Jy/beam
! Clean residual mean=0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.407346 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 89 components and 0.407346 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=1.503 mas, bpa=-30.05 degrees
! Estimated noise=0.318502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000283633 Jy
! Component: 100  -  total flux cleaned = -0.000170014 Jy
! Component: 150  -  total flux cleaned = -1.46928e-05 Jy
! Component: 200  -  total flux cleaned = -6.20449e-05 Jy
! Total flux subtracted in 200 components = -6.20449e-05 Jy
! Clean residual min=-0.002069 max=0.001742 Jy/beam
! Clean residual mean=0.000000 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.407284 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 101 components and 0.407284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059590Jy  sigma=1.285825
! Fit after  self-cal, rms=0.059567Jy  sigma=1.285264
wmodel /scr/pima/bg219e_uvs/J1038+4244_X_map.mod
! Writing 101 model components to file: /scr/pima/bg219e_uvs/J1038+4244_X_map.mod
wobs /scr/pima/bg219e_uvs/J1038+4244_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1038+4244_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J1038+4244_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bg219e_uvs/J1038+4244_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000681853 Jy
! Component: 100  -  total flux cleaned = -0.000904893 Jy
! Component: 150  -  total flux cleaned = -0.000963212 Jy
! Component: 200  -  total flux cleaned = -0.000822992 Jy
! Component: 250  -  total flux cleaned = -0.000849755 Jy
! Component: 300  -  total flux cleaned = -0.00082346 Jy
! Component: 350  -  total flux cleaned = -0.000774508 Jy
! Component: 400  -  total flux cleaned = -0.000726888 Jy
! Component: 450  -  total flux cleaned = -0.000703655 Jy
! Component: 500  -  total flux cleaned = -0.000636103 Jy
! Component: 550  -  total flux cleaned = -0.00057046 Jy
! Component: 600  -  total flux cleaned = -0.000485095 Jy
! Component: 650  -  total flux cleaned = -0.000402284 Jy
! Component: 700  -  total flux cleaned = -0.00032166 Jy
! Component: 750  -  total flux cleaned = -0.00030205 Jy
! Component: 800  -  total flux cleaned = -0.000301846 Jy
! Component: 850  -  total flux cleaned = -0.000321063 Jy
! Component: 900  -  total flux cleaned = -0.000321106 Jy
! Component: 950  -  total flux cleaned = -0.000339254 Jy
! Component: 1000  -  total flux cleaned = -0.000302815 Jy
! Component: 1050  -  total flux cleaned = -0.000302392 Jy
! Component: 1100  -  total flux cleaned = -0.000215163 Jy
! Component: 1150  -  total flux cleaned = -0.000163973 Jy
! Component: 1200  -  total flux cleaned = -0.000113357 Jy
! Component: 1250  -  total flux cleaned = -0.0001131 Jy
! Component: 1300  -  total flux cleaned = -8.03723e-05 Jy
! Component: 1350  -  total flux cleaned = -6.43161e-05 Jy
! Component: 1400  -  total flux cleaned = -0.000111442 Jy
! Component: 1450  -  total flux cleaned = -9.53868e-05 Jy
! Component: 1500  -  total flux cleaned = -0.000172478 Jy
! Component: 1550  -  total flux cleaned = -0.000217974 Jy
! Component: 1600  -  total flux cleaned = -0.000293088 Jy
! Component: 1650  -  total flux cleaned = -0.000337593 Jy
! Component: 1700  -  total flux cleaned = -0.00036677 Jy
! Component: 1750  -  total flux cleaned = -0.000410394 Jy
! Component: 1800  -  total flux cleaned = -0.000482253 Jy
! Component: 1850  -  total flux cleaned = -0.000539218 Jy
! Component: 1900  -  total flux cleaned = -0.000609714 Jy
! Component: 1950  -  total flux cleaned = -0.00066562 Jy
! Component: 2000  -  total flux cleaned = -0.000748442 Jy
! Component: 2050  -  total flux cleaned = -0.000734718 Jy
! Component: 2100  -  total flux cleaned = -0.000856973 Jy
! Component: 2150  -  total flux cleaned = -0.000977796 Jy
! Component: 2200  -  total flux cleaned = -0.000991046 Jy
! Component: 2250  -  total flux cleaned = -0.00109646 Jy
! Component: 2300  -  total flux cleaned = -0.00113554 Jy
! Component: 2350  -  total flux cleaned = -0.00118739 Jy
! Component: 2400  -  total flux cleaned = -0.00126442 Jy
! Component: 2450  -  total flux cleaned = -0.00131529 Jy
! Component: 2500  -  total flux cleaned = -0.00137849 Jy
! Component: 2550  -  total flux cleaned = -0.00147875 Jy
! Component: 2600  -  total flux cleaned = -0.00152842 Jy
! Component: 2650  -  total flux cleaned = -0.00157774 Jy
! Component: 2700  -  total flux cleaned = -0.0016635 Jy
! Component: 2750  -  total flux cleaned = -0.00171205 Jy
! Component: 2800  -  total flux cleaned = -0.00179639 Jy
! Component: 2850  -  total flux cleaned = -0.00182035 Jy
! Component: 2900  -  total flux cleaned = -0.00186781 Jy
! Component: 2950  -  total flux cleaned = -0.001915 Jy
! Component: 3000  -  total flux cleaned = -0.00197347 Jy
! Component: 3050  -  total flux cleaned = -0.0020082 Jy
! Component: 3100  -  total flux cleaned = -0.0020429 Jy
! Component: 3150  -  total flux cleaned = -0.00208886 Jy
! Component: 3200  -  total flux cleaned = -0.00216866 Jy
! Component: 3250  -  total flux cleaned = -0.0022139 Jy
! Component: 3300  -  total flux cleaned = -0.0022589 Jy
! Component: 3350  -  total flux cleaned = -0.00228113 Jy
! Component: 3400  -  total flux cleaned = -0.00236995 Jy
! Component: 3450  -  total flux cleaned = -0.002392 Jy
! Component: 3500  -  total flux cleaned = -0.00244675 Jy
! Component: 3550  -  total flux cleaned = -0.00250131 Jy
! Component: 3600  -  total flux cleaned = -0.00251214 Jy
! Component: 3650  -  total flux cleaned = -0.00257686 Jy
! Component: 3700  -  total flux cleaned = -0.00260899 Jy
! Component: 3750  -  total flux cleaned = -0.00266231 Jy
! Component: 3800  -  total flux cleaned = -0.00271535 Jy
! Component: 3850  -  total flux cleaned = -0.00277854 Jy
! Component: 3900  -  total flux cleaned = -0.00285186 Jy
! Component: 3950  -  total flux cleaned = -0.00286235 Jy
! Component: 4000  -  total flux cleaned = -0.00292463 Jy
! Component: 4050  -  total flux cleaned = -0.00295558 Jy
! Total flux subtracted in 4096 components = -0.00299671 Jy
! Clean residual min=-0.000582 max=0.000603 Jy/beam
! Clean residual mean=0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.404288 Jy
keep
! Adding 250 model components to the UV plane model.
! The established model now contains 351 components and 0.404287 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1038+4244_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.082 x 1.503 at -30.05 degrees (North through East)
! Clean map  min=-0.0012537  max=0.34237 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1038+4244_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.342371 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000161627 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.141624 0.141624 0.283249 0.566498 1.133 2.26599 4.53198 9.06397 18.1279 36.2559 72.5117
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.342 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2118.28 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1038+4244_X_uvs.log closed on Thu Apr  7 09:06:02 2016