! Started logfile: /scr/pima/bg219e_uvs/J1009+0622_X_uvs.log on Thu Apr  7 09:05:29 2016
obs /scr/pima/bg219e_uvs/J1009+0622_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1009+0622_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.794152 visibilities/baseline/integration-bin.
! Found source: J1009+0622
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24444 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J1009+0622_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.007102Jy  sigma=24.485573
! Fit after  self-cal, rms=0.896348Jy  sigma=21.725882
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8172 mas, bmaj=1.737 mas, bpa=1.1 degrees
! Estimated noise=0.437929 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0775216 Jy
! Component: 100  -  total flux cleaned = 0.098182 Jy
! Total flux subtracted in 100 components = 0.098182 Jy
! Clean residual min=-0.003892 max=0.009334 Jy/beam
! Clean residual mean=-0.000004 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.098182 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.098182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061917Jy  sigma=1.457259
! Fit after  self-cal, rms=0.061727Jy  sigma=1.452741
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104344 Jy
! Component: 100  -  total flux cleaned = 0.0163917 Jy
! Total flux subtracted in 100 components = 0.0163917 Jy
! Clean residual min=-0.003440 max=0.005726 Jy/beam
! Clean residual mean=-0.000002 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.114574 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 22 components and 0.114574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059428Jy  sigma=1.389410
! Fit after  self-cal, rms=0.059428Jy  sigma=1.389103
! Inverting map 
! Added new window around map position (1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00506895 Jy
! Component: 100  -  total flux cleaned = 0.0080084 Jy
! Total flux subtracted in 100 components = 0.0080084 Jy
! Clean residual min=-0.002928 max=0.003103 Jy/beam
! Clean residual mean=-0.000001 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.122582 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.122582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058912Jy  sigma=1.375253
! Fit after  self-cal, rms=0.058893Jy  sigma=1.374544
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9913 mas, bmaj=2.043 mas, bpa=3.009 degrees
! Estimated noise=0.249581 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00313946 Jy
! Component: 100  -  total flux cleaned = 0.0047458 Jy
! Component: 150  -  total flux cleaned = 0.0056763 Jy
! Component: 200  -  total flux cleaned = 0.00627122 Jy
! Total flux subtracted in 200 components = 0.00627122 Jy
! Clean residual min=-0.001966 max=0.003066 Jy/beam
! Clean residual mean=-0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.128853 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 0.128853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058748Jy  sigma=1.370206
! Fit after  self-cal, rms=0.058744Jy  sigma=1.369943
! Inverting map 
! Added new window around map position (6.8, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00251598 Jy
! Component: 100  -  total flux cleaned = 0.00364263 Jy
! Component: 150  -  total flux cleaned = 0.00409157 Jy
! Component: 200  -  total flux cleaned = 0.00443687 Jy
! Total flux subtracted in 200 components = 0.00443687 Jy
! Clean residual min=-0.001635 max=0.001788 Jy/beam
! Clean residual mean=-0.000001 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.13329 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 71 components and 0.13329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058636Jy  sigma=1.366980
! Fit after  self-cal, rms=0.058630Jy  sigma=1.366699
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9913 x 2.043 at 3.009 degrees (North through East)
! Clean map  min=-0.0014954  max=0.10315 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.98     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.96     KP        0.99     
!   LA        0.96     MK        1.00     NL        1.05     OV        1.02     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.97     KP        0.97     
!   LA        1.00     MK        1.01     NL        1.05     OV        1.02     
!   PT        1.00     SC        1.10     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        1.03     
!   LA        0.98     MK        0.99     NL        1.04     OV        1.00     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.98     KP        1.02     
!   LA        0.95     MK        1.08     NL        1.05     OV        0.97     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        1.05     
!   LA        1.01     MK        0.98     NL        1.03     OV        1.00     
!   PT        1.01     SC        1.01     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058630Jy  sigma=1.366699
! Fit after  self-cal, rms=0.058591Jy  sigma=1.363508
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9934 mas, bmaj=2.049 mas, bpa=2.983 degrees
! Estimated noise=0.249679 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000570983 Jy
! Component: 100  -  total flux cleaned = 0.000444832 Jy
! Component: 150  -  total flux cleaned = 0.000378626 Jy
! Component: 200  -  total flux cleaned = 0.000359374 Jy
! Total flux subtracted in 200 components = 0.000359374 Jy
! Clean residual min=-0.001534 max=0.001792 Jy/beam
! Clean residual mean=-0.000000 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.133649 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 82 components and 0.13365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058574Jy  sigma=1.363017
! Fit after  self-cal, rms=0.058581Jy  sigma=1.362940
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058581Jy  sigma=1.362940
! Fit after  self-cal, rms=0.058953Jy  sigma=1.359346
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9955 mas, bmaj=2.044 mas, bpa=3.134 degrees
! Estimated noise=0.24984 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00034822 Jy
! Component: 100  -  total flux cleaned = -0.000373979 Jy
! Component: 150  -  total flux cleaned = -0.000412047 Jy
! Component: 200  -  total flux cleaned = -0.000428657 Jy
! Total flux subtracted in 200 components = -0.000428657 Jy
! Clean residual min=-0.001474 max=0.001469 Jy/beam
! Clean residual mean=-0.000000 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.133221 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 97 components and 0.133221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058940Jy  sigma=1.359013
! Fit after  self-cal, rms=0.058953Jy  sigma=1.358933
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-19.4, 4.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000813191 Jy
! Component: 100  -  total flux cleaned = 0.000575279 Jy
! Component: 150  -  total flux cleaned = 0.000637931 Jy
! Component: 200  -  total flux cleaned = 0.000677015 Jy
! Total flux subtracted in 200 components = 0.000677015 Jy
! Clean residual min=-0.001361 max=0.001303 Jy/beam
! Clean residual mean=-0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.133898 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 115 components and 0.133898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058923Jy  sigma=1.358196
! Fit after  self-cal, rms=0.058920Jy  sigma=1.358145
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058920Jy  sigma=1.358145
! Fit after  self-cal, rms=0.058939Jy  sigma=1.358102
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9962 mas, bmaj=2.044 mas, bpa=3.161 degrees
! Estimated noise=0.249644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000154811 Jy
! Component: 100  -  total flux cleaned = 0.000117832 Jy
! Component: 150  -  total flux cleaned = 8.22615e-05 Jy
! Component: 200  -  total flux cleaned = 9.92959e-05 Jy
! Total flux subtracted in 200 components = 9.92959e-05 Jy
! Clean residual min=-0.001317 max=0.001285 Jy/beam
! Clean residual mean=-0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.133997 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 127 components and 0.133997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058928Jy  sigma=1.357846
! Fit after  self-cal, rms=0.058928Jy  sigma=1.357840
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51423e-05 Jy
! Component: 100  -  total flux cleaned = 5.12625e-05 Jy
! Component: 150  -  total flux cleaned = 5.17048e-05 Jy
! Component: 200  -  total flux cleaned = 9.55596e-05 Jy
! Total flux subtracted in 200 components = 9.55596e-05 Jy
! Clean residual min=-0.001311 max=0.001263 Jy/beam
! Clean residual mean=-0.000000 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.134093 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 132 components and 0.134093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058921Jy  sigma=1.357673
! Fit after  self-cal, rms=0.058920Jy  sigma=1.357671
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058920Jy  sigma=1.357671
! Fit after  self-cal, rms=0.058954Jy  sigma=1.357659
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.226 mas, bmaj=3.213 mas, bpa=5.86 degrees
! Estimated noise=0.302577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07262e-05 Jy
! Component: 100  -  total flux cleaned = 6.75384e-05 Jy
! Component: 150  -  total flux cleaned = 9.89676e-05 Jy
! Component: 200  -  total flux cleaned = 0.000126836 Jy
! Total flux subtracted in 200 components = 0.000126836 Jy
! Clean residual min=-0.001275 max=0.001115 Jy/beam
! Clean residual mean=-0.000000 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.13422 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 141 components and 0.13422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058950Jy  sigma=1.357579
! Fit after  self-cal, rms=0.058950Jy  sigma=1.357571
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.8076e-05 Jy
! Component: 100  -  total flux cleaned = 7.6244e-05 Jy
! Component: 150  -  total flux cleaned = 7.63794e-05 Jy
! Component: 200  -  total flux cleaned = 9.10093e-05 Jy
! Total flux subtracted in 200 components = 9.10093e-05 Jy
! Clean residual min=-0.001268 max=0.001119 Jy/beam
! Clean residual mean=-0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.134311 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 147 components and 0.134311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058948Jy  sigma=1.357533
! Fit after  self-cal, rms=0.058948Jy  sigma=1.357529
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9966 mas, bmaj=2.044 mas, bpa=3.149 degrees
! Estimated noise=0.249597 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9966 x 2.044 at 3.149 degrees (North through East)
! Clean map  min=-0.0012142  max=0.10312 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8205 mas, bmaj=1.736 mas, bpa=1.168 degrees
! Estimated noise=0.440785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0778029 Jy
! Component: 100  -  total flux cleaned = 0.0990106 Jy
! Component: 150  -  total flux cleaned = 0.109637 Jy
! Component: 200  -  total flux cleaned = 0.11585 Jy
! Total flux subtracted in 200 components = 0.11585 Jy
! Clean residual min=-0.002887 max=0.003330 Jy/beam
! Clean residual mean=-0.000002 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.11585 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.11585 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9966 mas, bmaj=2.044 mas, bpa=3.149 degrees
! Estimated noise=0.249597 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00523849 Jy
! Component: 100  -  total flux cleaned = 0.00838849 Jy
! Component: 150  -  total flux cleaned = 0.0106929 Jy
! Component: 200  -  total flux cleaned = 0.0125293 Jy
! Total flux subtracted in 200 components = 0.0125293 Jy
! Clean residual min=-0.001760 max=0.001478 Jy/beam
! Clean residual mean=-0.000001 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.128379 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 56 components and 0.128379 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.226 mas, bmaj=3.213 mas, bpa=5.86 degrees
! Estimated noise=0.302577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205612 Jy
! Component: 100  -  total flux cleaned = 0.00335228 Jy
! Component: 150  -  total flux cleaned = 0.00398048 Jy
! Component: 200  -  total flux cleaned = 0.00438784 Jy
! Total flux subtracted in 200 components = 0.00438784 Jy
! Clean residual min=-0.001486 max=0.001269 Jy/beam
! Clean residual mean=-0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.132767 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000213486 Jy
! Component: 100  -  total flux cleaned = 0.000430379 Jy
! Component: 150  -  total flux cleaned = 0.000580712 Jy
! Component: 200  -  total flux cleaned = 0.000678751 Jy
! Total flux subtracted in 200 components = 0.000678751 Jy
! Clean residual min=-0.001331 max=0.001199 Jy/beam
! Clean residual mean=-0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.133446 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 103 components and 0.133446 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9966 mas, bmaj=2.044 mas, bpa=3.149 degrees
! Estimated noise=0.249597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.35959e-05 Jy
! Component: 100  -  total flux cleaned = 5.33436e-05 Jy
! Component: 150  -  total flux cleaned = 8.09851e-05 Jy
! Component: 200  -  total flux cleaned = 0.000181497 Jy
! Total flux subtracted in 200 components = 0.000181497 Jy
! Clean residual min=-0.001488 max=0.001306 Jy/beam
! Clean residual mean=-0.000000 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.133627 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 123 components and 0.133627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058978Jy  sigma=1.358324
! Fit after  self-cal, rms=0.058968Jy  sigma=1.358215
wmodel /scr/pima/bg219e_uvs/J1009+0622_X_map.mod
! Writing 123 model components to file: /scr/pima/bg219e_uvs/J1009+0622_X_map.mod
wobs /scr/pima/bg219e_uvs/J1009+0622_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J1009+0622_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J1009+0622_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J1009+0622_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000494261 Jy
! Component: 100  -  total flux cleaned = -0.000631252 Jy
! Component: 150  -  total flux cleaned = -0.000523744 Jy
! Component: 200  -  total flux cleaned = -0.000440732 Jy
! Component: 250  -  total flux cleaned = -0.000300773 Jy
! Component: 300  -  total flux cleaned = -0.000145915 Jy
! Component: 350  -  total flux cleaned = -3.26658e-05 Jy
! Component: 400  -  total flux cleaned = 5.8617e-05 Jy
! Component: 450  -  total flux cleaned = 0.000111745 Jy
! Component: 500  -  total flux cleaned = 0.000163786 Jy
! Component: 550  -  total flux cleaned = 0.000214799 Jy
! Component: 600  -  total flux cleaned = 0.000314435 Jy
! Component: 650  -  total flux cleaned = 0.000395603 Jy
! Component: 700  -  total flux cleaned = 0.000443368 Jy
! Component: 750  -  total flux cleaned = 0.000490223 Jy
! Component: 800  -  total flux cleaned = 0.00055142 Jy
! Component: 850  -  total flux cleaned = 0.000611425 Jy
! Component: 900  -  total flux cleaned = 0.000626254 Jy
! Component: 950  -  total flux cleaned = 0.000640693 Jy
! Component: 1000  -  total flux cleaned = 0.000640859 Jy
! Component: 1050  -  total flux cleaned = 0.000654944 Jy
! Component: 1100  -  total flux cleaned = 0.000599449 Jy
! Component: 1150  -  total flux cleaned = 0.000626874 Jy
! Component: 1200  -  total flux cleaned = 0.000599754 Jy
! Component: 1250  -  total flux cleaned = 0.000559735 Jy
! Component: 1300  -  total flux cleaned = 0.000586055 Jy
! Component: 1350  -  total flux cleaned = 0.000534315 Jy
! Component: 1400  -  total flux cleaned = 0.000559889 Jy
! Component: 1450  -  total flux cleaned = 0.000534602 Jy
! Component: 1500  -  total flux cleaned = 0.000534338 Jy
! Component: 1550  -  total flux cleaned = 0.000485329 Jy
! Component: 1600  -  total flux cleaned = 0.000473226 Jy
! Component: 1650  -  total flux cleaned = 0.000473246 Jy
! Component: 1700  -  total flux cleaned = 0.000437735 Jy
! Component: 1750  -  total flux cleaned = 0.000438051 Jy
! Component: 1800  -  total flux cleaned = 0.000461163 Jy
! Component: 1850  -  total flux cleaned = 0.000438186 Jy
! Component: 1900  -  total flux cleaned = 0.000404064 Jy
! Component: 1950  -  total flux cleaned = 0.000359121 Jy
! Component: 2000  -  total flux cleaned = 0.000359203 Jy
! Component: 2050  -  total flux cleaned = 0.00030426 Jy
! Component: 2100  -  total flux cleaned = 0.000304338 Jy
! Component: 2150  -  total flux cleaned = 0.000293475 Jy
! Component: 2200  -  total flux cleaned = 0.000229333 Jy
! Component: 2250  -  total flux cleaned = 0.000229447 Jy
! Component: 2300  -  total flux cleaned = 0.000260774 Jy
! Component: 2350  -  total flux cleaned = 0.000229452 Jy
! Component: 2400  -  total flux cleaned = 0.000167487 Jy
! Component: 2450  -  total flux cleaned = 0.000167486 Jy
! Component: 2500  -  total flux cleaned = 0.000137091 Jy
! Component: 2550  -  total flux cleaned = 0.000157146 Jy
! Component: 2600  -  total flux cleaned = 9.72464e-05 Jy
! Component: 2650  -  total flux cleaned = 6.75447e-05 Jy
! Component: 2700  -  total flux cleaned = 4.79095e-05 Jy
! Component: 2750  -  total flux cleaned = 5.76571e-05 Jy
! Component: 2800  -  total flux cleaned = 9.33208e-06 Jy
! Component: 2850  -  total flux cleaned = -2.02379e-07 Jy
! Component: 2900  -  total flux cleaned = -2.86345e-07 Jy
! Component: 2950  -  total flux cleaned = -2.86597e-05 Jy
! Component: 3000  -  total flux cleaned = -5.67972e-05 Jy
! Component: 3050  -  total flux cleaned = -4.74681e-05 Jy
! Component: 3100  -  total flux cleaned = -6.58847e-05 Jy
! Component: 3150  -  total flux cleaned = -0.000102672 Jy
! Component: 3200  -  total flux cleaned = -0.00012088 Jy
! Component: 3250  -  total flux cleaned = -0.000147945 Jy
! Component: 3300  -  total flux cleaned = -0.000183981 Jy
! Component: 3350  -  total flux cleaned = -0.000228568 Jy
! Component: 3400  -  total flux cleaned = -0.000246302 Jy
! Component: 3450  -  total flux cleaned = -0.000263878 Jy
! Component: 3500  -  total flux cleaned = -0.000281424 Jy
! Component: 3550  -  total flux cleaned = -0.000298888 Jy
! Component: 3600  -  total flux cleaned = -0.000307559 Jy
! Component: 3650  -  total flux cleaned = -0.000341856 Jy
! Component: 3700  -  total flux cleaned = -0.000324656 Jy
! Component: 3750  -  total flux cleaned = -0.000324635 Jy
! Component: 3800  -  total flux cleaned = -0.000341572 Jy
! Component: 3850  -  total flux cleaned = -0.000333099 Jy
! Component: 3900  -  total flux cleaned = -0.000349819 Jy
! Component: 3950  -  total flux cleaned = -0.000358105 Jy
! Component: 4000  -  total flux cleaned = -0.000349878 Jy
! Component: 4050  -  total flux cleaned = -0.000358028 Jy
! Total flux subtracted in 4096 components = -0.000341732 Jy
! Clean residual min=-0.000456 max=0.000590 Jy/beam
! Clean residual mean=-0.000000 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.133286 Jy
keep
! Adding 260 model components to the UV plane model.
! The established model now contains 383 components and 0.133286 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J1009+0622_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9966 x 2.044 at 3.149 degrees (North through East)
! Clean map  min=-0.0010332  max=0.10391 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1009+0622_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.103911 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00013772 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.397609 0.397609 0.795218 1.59044 3.18087 6.36174 12.7235 25.447 50.8939
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.103 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  754.51 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1009+0622_X_uvs.log closed on Thu Apr  7 09:05:33 2016