! Started logfile: /scr/pima/bg219e_uvs/J1009+0622_X_dfm.log on Thu May 19 18:34:07 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J1009+0622_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J1009+0622_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.794152 visibilities/baseline/integration-bin.
! Found source: J1009+0622
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24444 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1009+0622_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007135Jy  sigma=23.456621
! Fit after  self-cal, rms=0.897933Jy  sigma=20.858403
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7827 mas, bmaj=1.659 mas, bpa=0.6304 degrees
! Estimated noise=0.364539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.075997 Jy
! Component: 100  -  total flux cleaned = 0.0962688 Jy
! Total flux subtracted in 100 components = 0.0962688 Jy
! Clean residual min=-0.003804 max=0.009235 Jy/beam
! Clean residual mean=-0.000003 rms=0.001056 Jy/beam
! Combined flux in latest and established models = 0.0962688 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0962688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064837Jy  sigma=1.448346
! Fit after  self-cal, rms=0.064663Jy  sigma=1.443843
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104445 Jy
! Component: 100  -  total flux cleaned = 0.0162181 Jy
! Total flux subtracted in 100 components = 0.0162181 Jy
! Clean residual min=-0.002921 max=0.004811 Jy/beam
! Clean residual mean=-0.000002 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.112487 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.112487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062401Jy  sigma=1.382351
! Fit after  self-cal, rms=0.062394Jy  sigma=1.381967
! Inverting map 
! Added new window around map position (1.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468463 Jy
! Component: 100  -  total flux cleaned = 0.00751712 Jy
! Total flux subtracted in 100 components = 0.00751712 Jy
! Clean residual min=-0.002571 max=0.003043 Jy/beam
! Clean residual mean=-0.000001 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.120004 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 31 components and 0.120004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061922Jy  sigma=1.369190
! Fit after  self-cal, rms=0.061913Jy  sigma=1.368752
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9836 mas, bmaj=2.027 mas, bpa=3.114 degrees
! Estimated noise=0.199335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334584 Jy
! Component: 100  -  total flux cleaned = 0.00501104 Jy
! Component: 150  -  total flux cleaned = 0.00603104 Jy
! Component: 200  -  total flux cleaned = 0.00669439 Jy
! Total flux subtracted in 200 components = 0.00669439 Jy
! Clean residual min=-0.001802 max=0.002939 Jy/beam
! Clean residual mean=-0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.126698 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 49 components and 0.126698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061760Jy  sigma=1.364107
! Fit after  self-cal, rms=0.061757Jy  sigma=1.363806
! Inverting map 
! Added new window around map position (6.8, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024501 Jy
! Component: 100  -  total flux cleaned = 0.00371074 Jy
! Component: 150  -  total flux cleaned = 0.00439755 Jy
! Component: 200  -  total flux cleaned = 0.00485667 Jy
! Total flux subtracted in 200 components = 0.00485667 Jy
! Clean residual min=-0.001396 max=0.001492 Jy/beam
! Clean residual mean=-0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.131555 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 74 components and 0.131555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061658Jy  sigma=1.361237
! Fit after  self-cal, rms=0.061653Jy  sigma=1.360994
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9836 x 2.027 at 3.114 degrees (North through East)
! Clean map  min=-0.001338  max=0.10216 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.96     KP        0.99     
!   LA        0.95     MK        1.00     NL        1.05     OV        1.01     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        0.96     
!   LA        0.99     MK        1.01     NL        1.04     OV        1.01     
!   PT        0.99     SC        1.09     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.03     MK        1.08     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.99     KP        1.02     
!   LA        0.97     MK        0.99     NL        1.03     OV        1.00     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.98     KP        1.02     
!   LA        0.95     MK        1.07     NL        1.04     OV        0.96     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        1.05     
!   LA        1.00     MK        0.98     NL        1.03     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.03     KP        1.00     
!   LA        1.03     MK        1.04     NL        1.04     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.97     KP        1.01     
!   LA        0.99     MK        1.04     NL        0.99     OV        0.99     
!   PT        1.01     SC        1.14     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.00     KP        1.00     
!   LA        1.01     MK        0.95     NL        1.04     OV        1.01     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        1.02     
!   LA        1.00     MK        0.94     NL        1.02     OV        1.07     
!   PT        1.03     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.061653Jy  sigma=1.360994
! Fit after  self-cal, rms=0.061795Jy  sigma=1.357519
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9861 mas, bmaj=2.034 mas, bpa=3.098 degrees
! Estimated noise=0.199506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00061642 Jy
! Component: 100  -  total flux cleaned = 0.000683151 Jy
! Component: 150  -  total flux cleaned = 0.000721506 Jy
! Component: 200  -  total flux cleaned = 0.000721308 Jy
! Total flux subtracted in 200 components = 0.000721308 Jy
! Clean residual min=-0.001334 max=0.001560 Jy/beam
! Clean residual mean=0.000000 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.132276 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.132276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061781Jy  sigma=1.357164
! Fit after  self-cal, rms=0.061787Jy  sigma=1.357080
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061787Jy  sigma=1.357080
! Fit after  self-cal, rms=0.062208Jy  sigma=1.353685
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9883 mas, bmaj=2.028 mas, bpa=3.253 degrees
! Estimated noise=0.199784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000275211 Jy
! Component: 100  -  total flux cleaned = -0.000374393 Jy
! Component: 150  -  total flux cleaned = -0.000391698 Jy
! Component: 200  -  total flux cleaned = -0.000361519 Jy
! Total flux subtracted in 200 components = -0.000361519 Jy
! Clean residual min=-0.001308 max=0.001231 Jy/beam
! Clean residual mean=0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.131915 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 97 components and 0.131915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062197Jy  sigma=1.353437
! Fit after  self-cal, rms=0.062208Jy  sigma=1.353355
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.78538e-05 Jy
! Component: 100  -  total flux cleaned = 4.37149e-06 Jy
! Component: 150  -  total flux cleaned = 1.72863e-05 Jy
! Component: 200  -  total flux cleaned = 5.27859e-06 Jy
! Total flux subtracted in 200 components = 5.27859e-06 Jy
! Clean residual min=-0.001304 max=0.001235 Jy/beam
! Clean residual mean=0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.13192 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 108 components and 0.13192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062203Jy  sigma=1.353247
! Fit after  self-cal, rms=0.062202Jy  sigma=1.353241
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062202Jy  sigma=1.353241
! Fit after  self-cal, rms=0.062237Jy  sigma=1.353214
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9879 mas, bmaj=2.026 mas, bpa=3.187 degrees
! Estimated noise=0.19966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152577 Jy
! Component: 100  -  total flux cleaned = -0.000127497 Jy
! Component: 150  -  total flux cleaned = -0.000116194 Jy
! Component: 200  -  total flux cleaned = -0.000116269 Jy
! Total flux subtracted in 200 components = -0.000116269 Jy
! Clean residual min=-0.001301 max=0.001193 Jy/beam
! Clean residual mean=0.000000 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.131804 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 111 components and 0.131804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062233Jy  sigma=1.353124
! Fit after  self-cal, rms=0.062233Jy  sigma=1.353121
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.35477e-06 Jy
! Component: 100  -  total flux cleaned = 4.55849e-06 Jy
! Component: 150  -  total flux cleaned = 2.32266e-05 Jy
! Component: 200  -  total flux cleaned = 2.298e-05 Jy
! Total flux subtracted in 200 components = 2.298e-05 Jy
! Clean residual min=-0.001299 max=0.001185 Jy/beam
! Clean residual mean=0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.131827 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 118 components and 0.131827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062230Jy  sigma=1.353065
! Fit after  self-cal, rms=0.062230Jy  sigma=1.353065
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062230Jy  sigma=1.353065
! Fit after  self-cal, rms=0.062246Jy  sigma=1.353056
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.224 mas, bmaj=3.199 mas, bpa=5.334 degrees
! Estimated noise=0.242108 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.78628e-05 Jy
! Component: 100  -  total flux cleaned = -8.12642e-05 Jy
! Component: 150  -  total flux cleaned = -6.42765e-05 Jy
! Component: 200  -  total flux cleaned = -5.90543e-05 Jy
! Total flux subtracted in 200 components = -5.90543e-05 Jy
! Clean residual min=-0.001080 max=0.001203 Jy/beam
! Clean residual mean=-0.000000 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.131768 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 128 components and 0.131768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062244Jy  sigma=1.353032
! Fit after  self-cal, rms=0.062244Jy  sigma=1.353029
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.16784e-05 Jy
! Component: 100  -  total flux cleaned = 6.46219e-06 Jy
! Component: 150  -  total flux cleaned = 1.60708e-05 Jy
! Component: 200  -  total flux cleaned = 1.13053e-05 Jy
! Total flux subtracted in 200 components = 1.13053e-05 Jy
! Clean residual min=-0.001075 max=0.001195 Jy/beam
! Clean residual mean=-0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.131779 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 132 components and 0.131779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062244Jy  sigma=1.353019
! Fit after  self-cal, rms=0.062244Jy  sigma=1.353016
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9876 mas, bmaj=2.025 mas, bpa=3.133 degrees
! Estimated noise=0.199559 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9876 x 2.025 at 3.133 degrees (North through East)
! Clean map  min=-0.0012145  max=0.10239 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7835 mas, bmaj=1.654 mas, bpa=0.5201 degrees
! Estimated noise=0.365333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0759929 Jy
! Component: 100  -  total flux cleaned = 0.0970112 Jy
! Component: 150  -  total flux cleaned = 0.107661 Jy
! Component: 200  -  total flux cleaned = 0.113776 Jy
! Total flux subtracted in 200 components = 0.113776 Jy
! Clean residual min=-0.002525 max=0.003170 Jy/beam
! Clean residual mean=-0.000001 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.113776 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.113776 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9876 mas, bmaj=2.025 mas, bpa=3.133 degrees
! Estimated noise=0.199559 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00548054 Jy
! Component: 100  -  total flux cleaned = 0.00876255 Jy
! Component: 150  -  total flux cleaned = 0.0110893 Jy
! Component: 200  -  total flux cleaned = 0.0128192 Jy
! Total flux subtracted in 200 components = 0.0128192 Jy
! Clean residual min=-0.001738 max=0.001362 Jy/beam
! Clean residual mean=-0.000001 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.126595 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 46 components and 0.126595 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.224 mas, bmaj=3.199 mas, bpa=5.334 degrees
! Estimated noise=0.242108 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197135 Jy
! Component: 100  -  total flux cleaned = 0.00321066 Jy
! Component: 150  -  total flux cleaned = 0.00404364 Jy
! Component: 200  -  total flux cleaned = 0.00443115 Jy
! Total flux subtracted in 200 components = 0.00443115 Jy
! Clean residual min=-0.001252 max=0.001064 Jy/beam
! Clean residual mean=-0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.131026 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128413 Jy
! Component: 100  -  total flux cleaned = 0.000218832 Jy
! Component: 150  -  total flux cleaned = 0.00025856 Jy
! Component: 200  -  total flux cleaned = 0.000282633 Jy
! Total flux subtracted in 200 components = 0.000282633 Jy
! Clean residual min=-0.001173 max=0.001115 Jy/beam
! Clean residual mean=-0.000000 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.131309 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 98 components and 0.131309 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9876 mas, bmaj=2.025 mas, bpa=3.133 degrees
! Estimated noise=0.199559 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.89345e-05 Jy
! Component: 100  -  total flux cleaned = -0.000110446 Jy
! Component: 150  -  total flux cleaned = -7.57345e-05 Jy
! Component: 200  -  total flux cleaned = -7.62272e-05 Jy
! Total flux subtracted in 200 components = -7.62272e-05 Jy
! Clean residual min=-0.001369 max=0.001149 Jy/beam
! Clean residual mean=-0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.131232 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 114 components and 0.131232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062251Jy  sigma=1.353289
! Fit after  self-cal, rms=0.062246Jy  sigma=1.353244
wmodel /J1009+0622_X_map.mod
! wmodel: Unable to open new model file: /J1009+0622_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J1009+0622_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9876 x 2.025 at 3.133 degrees (North through East)
! Clean map  min=-0.0012994  max=0.10272 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J1009+0622_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10272 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000269206 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.786231 0.786231 1.57246 3.14493 6.28985 12.5797 25.1594 50.3188
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  381.567 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J1009+0622_X_dfm.log closed on Thu May 19 18:34:10 2016