! Started logfile: /scr/pima/bg219e_uvs/J0943+3614_X_dfm.log on Thu May 19 18:33:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0943+3614_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0943+3614_X_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.812222 visibilities/baseline/integration-bin.
! Found source: J0943+3614
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0943+3614_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.032751Jy  sigma=23.850430
! Fit after  self-cal, rms=0.791985Jy  sigma=18.210074
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7845 mas, bmaj=1.267 mas, bpa=-14.27 degrees
! Estimated noise=0.473731 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146385 Jy
! Component: 100  -  total flux cleaned = 0.201195 Jy
! Total flux subtracted in 100 components = 0.201195 Jy
! Clean residual min=-0.008296 max=0.024922 Jy/beam
! Clean residual mean=-0.000003 rms=0.002372 Jy/beam
! Combined flux in latest and established models = 0.201195 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.201195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078617Jy  sigma=1.777248
! Fit after  self-cal, rms=0.078193Jy  sigma=1.767513
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278889 Jy
! Component: 100  -  total flux cleaned = 0.0425454 Jy
! Total flux subtracted in 100 components = 0.0425454 Jy
! Clean residual min=-0.004365 max=0.007199 Jy/beam
! Clean residual mean=-0.000003 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 0.24374 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 0.24374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064587Jy  sigma=1.427019
! Fit after  self-cal, rms=0.064507Jy  sigma=1.424944
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00880038 Jy
! Component: 100  -  total flux cleaned = 0.0139692 Jy
! Total flux subtracted in 100 components = 0.0139692 Jy
! Clean residual min=-0.003565 max=0.004470 Jy/beam
! Clean residual mean=-0.000003 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.257709 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.257709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062715Jy  sigma=1.378179
! Fit after  self-cal, rms=0.062708Jy  sigma=1.377963
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=1.588 mas, bpa=-10.59 degrees
! Estimated noise=0.235631 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00632873 Jy
! Component: 100  -  total flux cleaned = 0.0101062 Jy
! Component: 150  -  total flux cleaned = 0.0124635 Jy
! Component: 200  -  total flux cleaned = 0.0139358 Jy
! Total flux subtracted in 200 components = 0.0139358 Jy
! Clean residual min=-0.002552 max=0.002648 Jy/beam
! Clean residual mean=-0.000002 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.271645 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 27 components and 0.271645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062068Jy  sigma=1.361027
! Fit after  self-cal, rms=0.062069Jy  sigma=1.360949
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.048 x 1.588 at -10.59 degrees (North through East)
! Clean map  min=-0.0023481  max=0.20369 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        0.98     
!   LA        0.98     MK        0.95     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.00     MK        0.94     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.00     KP        0.97     
!   LA        0.97     MK        0.95     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00     KP        1.01     
!   LA        0.99     MK        0.95     NL        1.01     OV        1.01     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.98     KP        0.98     
!   LA        0.99     MK        0.96     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.00     KP        0.99     
!   LA        0.97     MK        0.98     NL        1.00     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.98     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.02     OV        1.01     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.99     KP        1.00     
!   LA        0.98     MK        0.94     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.10     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.01     KP        1.00     
!   LA        0.96     MK        0.96     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.08     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.98     
!   LA        0.99     MK        0.95     NL        1.04     OV        0.99     
!   PT        0.99     SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.11     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.98     KP        1.00     
!   LA        0.98     MK        0.98     NL        1.03     OV        1.02     
!   PT        0.99     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.062069Jy  sigma=1.360949
! Fit after  self-cal, rms=0.062124Jy  sigma=1.351544
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.046 mas, bmaj=1.606 mas, bpa=-12.13 degrees
! Estimated noise=0.235867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00090805 Jy
! Component: 100  -  total flux cleaned = -0.00103345 Jy
! Component: 150  -  total flux cleaned = -0.00103097 Jy
! Component: 200  -  total flux cleaned = -0.00105548 Jy
! Total flux subtracted in 200 components = -0.00105548 Jy
! Clean residual min=-0.002148 max=0.002257 Jy/beam
! Clean residual mean=-0.000000 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.27059 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 32 components and 0.27059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062080Jy  sigma=1.350458
! Fit after  self-cal, rms=0.062087Jy  sigma=1.350405
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062087Jy  sigma=1.350405
! Fit after  self-cal, rms=0.061801Jy  sigma=1.344926
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.588 mas, bpa=-11.68 degrees
! Estimated noise=0.234793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.35419e-05 Jy
! Component: 100  -  total flux cleaned = -8.86867e-05 Jy
! Component: 150  -  total flux cleaned = -0.00011248 Jy
! Component: 200  -  total flux cleaned = -0.000175765 Jy
! Total flux subtracted in 200 components = -0.000175765 Jy
! Clean residual min=-0.001936 max=0.001743 Jy/beam
! Clean residual mean=0.000000 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.270414 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.270414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061783Jy  sigma=1.344469
! Fit after  self-cal, rms=0.061790Jy  sigma=1.344432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.85375e-05 Jy
! Component: 100  -  total flux cleaned = -0.000100209 Jy
! Component: 150  -  total flux cleaned = -0.000150548 Jy
! Component: 200  -  total flux cleaned = -0.000197232 Jy
! Total flux subtracted in 200 components = -0.000197232 Jy
! Clean residual min=-0.001918 max=0.001730 Jy/beam
! Clean residual mean=0.000000 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.270217 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 37 components and 0.270217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061781Jy  sigma=1.344218
! Fit after  self-cal, rms=0.061780Jy  sigma=1.344213
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061780Jy  sigma=1.344213
! Fit after  self-cal, rms=0.061789Jy  sigma=1.344129
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.585 mas, bpa=-11.57 degrees
! Estimated noise=0.234656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.75801e-05 Jy
! Component: 100  -  total flux cleaned = 6.95463e-05 Jy
! Component: 150  -  total flux cleaned = 3.55982e-05 Jy
! Component: 200  -  total flux cleaned = 4.27733e-06 Jy
! Total flux subtracted in 200 components = 4.27733e-06 Jy
! Clean residual min=-0.001912 max=0.001754 Jy/beam
! Clean residual mean=0.000000 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.270221 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 39 components and 0.270221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061779Jy  sigma=1.343913
! Fit after  self-cal, rms=0.061780Jy  sigma=1.343911
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.51471e-05 Jy
! Component: 100  -  total flux cleaned = -8.60572e-05 Jy
! Component: 150  -  total flux cleaned = -0.000112325 Jy
! Component: 200  -  total flux cleaned = -0.000148883 Jy
! Total flux subtracted in 200 components = -0.000148883 Jy
! Clean residual min=-0.001894 max=0.001743 Jy/beam
! Clean residual mean=0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.270072 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 39 components and 0.270072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061775Jy  sigma=1.343794
! Fit after  self-cal, rms=0.061774Jy  sigma=1.343791
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061774Jy  sigma=1.343791
! Fit after  self-cal, rms=0.061783Jy  sigma=1.343746
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=2.653 mas, bpa=-10.33 degrees
! Estimated noise=0.288963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000599861 Jy
! Component: 100  -  total flux cleaned = -0.000703504 Jy
! Component: 150  -  total flux cleaned = -0.000744797 Jy
! Component: 200  -  total flux cleaned = -0.000772634 Jy
! Total flux subtracted in 200 components = -0.000772634 Jy
! Clean residual min=-0.001444 max=0.001752 Jy/beam
! Clean residual mean=0.000000 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.269299 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 42 components and 0.269299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061783Jy  sigma=1.343761
! Fit after  self-cal, rms=0.061782Jy  sigma=1.343745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.42064e-05 Jy
! Component: 100  -  total flux cleaned = -6.09439e-05 Jy
! Component: 150  -  total flux cleaned = -8.44206e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105717 Jy
! Total flux subtracted in 200 components = -0.000105717 Jy
! Clean residual min=-0.001438 max=0.001744 Jy/beam
! Clean residual mean=0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.269194 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 43 components and 0.269194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061784Jy  sigma=1.343783
! Fit after  self-cal, rms=0.061783Jy  sigma=1.343770
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.581 mas, bpa=-11.43 degrees
! Estimated noise=0.234588 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.045 x 1.581 at -11.43 degrees (North through East)
! Clean map  min=-0.0017223  max=0.20345 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7809 mas, bmaj=1.26 mas, bpa=-14.96 degrees
! Estimated noise=0.47047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146444 Jy
! Component: 100  -  total flux cleaned = 0.202714 Jy
! Component: 150  -  total flux cleaned = 0.230774 Jy
! Component: 200  -  total flux cleaned = 0.245308 Jy
! Total flux subtracted in 200 components = 0.245308 Jy
! Clean residual min=-0.003974 max=0.007016 Jy/beam
! Clean residual mean=-0.000002 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.245309 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.245309 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.581 mas, bpa=-11.43 degrees
! Estimated noise=0.234588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112546 Jy
! Component: 100  -  total flux cleaned = 0.0166393 Jy
! Component: 150  -  total flux cleaned = 0.019587 Jy
! Component: 200  -  total flux cleaned = 0.0212643 Jy
! Total flux subtracted in 200 components = 0.0212643 Jy
! Clean residual min=-0.001936 max=0.001915 Jy/beam
! Clean residual mean=-0.000000 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.266573 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 30 components and 0.266573 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.248 mas, bmaj=2.653 mas, bpa=-10.33 degrees
! Estimated noise=0.288963 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118134 Jy
! Component: 100  -  total flux cleaned = 0.00161432 Jy
! Component: 150  -  total flux cleaned = 0.00177791 Jy
! Component: 200  -  total flux cleaned = 0.00179755 Jy
! Total flux subtracted in 200 components = 0.00179755 Jy
! Clean residual min=-0.001411 max=0.001657 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.26837 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.40169e-05 Jy
! Component: 100  -  total flux cleaned = 2.74034e-05 Jy
! Component: 150  -  total flux cleaned = 4.06226e-05 Jy
! Component: 200  -  total flux cleaned = 4.91719e-05 Jy
! Total flux subtracted in 200 components = 4.91719e-05 Jy
! Clean residual min=-0.001417 max=0.001660 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.26842 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 41 components and 0.268419 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=1.581 mas, bpa=-11.43 degrees
! Estimated noise=0.234588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252152 Jy
! Component: 100  -  total flux cleaned = -0.000133401 Jy
! Component: 150  -  total flux cleaned = -6.7107e-06 Jy
! Component: 200  -  total flux cleaned = 0.000106755 Jy
! Total flux subtracted in 200 components = 0.000106755 Jy
! Clean residual min=-0.001850 max=0.001683 Jy/beam
! Clean residual mean=-0.000000 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.268526 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.268526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061773Jy  sigma=1.343538
! Fit after  self-cal, rms=0.061769Jy  sigma=1.343504
wmodel /J0943+3614_X_map.mod
! wmodel: Unable to open new model file: /J0943+3614_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0943+3614_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.045 x 1.581 at -11.43 degrees (North through East)
! Clean map  min=-0.0017286  max=0.20382 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0943+3614_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.203821 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000384519 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.565965 0.565965 1.13193 2.26386 4.52772 9.05544 18.1109 36.2218 72.4435
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.203 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  530.068 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0943+3614_X_dfm.log closed on Thu May 19 18:33:31 2016