! Started logfile: /scr/pima/bg219e_uvs/J0916+3854_X_uvs.log on Thu Apr  7 09:04:56 2016
obs /scr/pima/bg219e_uvs/J0916+3854_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0916+3854_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.813492 visibilities/baseline/integration-bin.
! Found source: J0916+3854
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12300 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0916+3854_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.103133Jy  sigma=24.108083
! Fit after  self-cal, rms=0.568538Jy  sigma=12.374496
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8464 mas, bmaj=1.336 mas, bpa=-17.95 degrees
! Estimated noise=0.672292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.327738 Jy
! Component: 100  -  total flux cleaned = 0.403215 Jy
! Total flux subtracted in 100 components = 0.403215 Jy
! Clean residual min=-0.013600 max=0.027917 Jy/beam
! Clean residual mean=0.000015 rms=0.003387 Jy/beam
! Combined flux in latest and established models = 0.403215 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.403215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.087895Jy  sigma=1.862524
! Fit after  self-cal, rms=0.087881Jy  sigma=1.862094
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0302626 Jy
! Component: 100  -  total flux cleaned = 0.0452072 Jy
! Total flux subtracted in 100 components = 0.0452072 Jy
! Clean residual min=-0.009420 max=0.018922 Jy/beam
! Clean residual mean=0.000008 rms=0.002338 Jy/beam
! Combined flux in latest and established models = 0.448422 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.448422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072986Jy  sigma=1.537281
! Fit after  self-cal, rms=0.072931Jy  sigma=1.535841
! Inverting map 
! Added new window around map position (-2.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174608 Jy
! Component: 100  -  total flux cleaned = 0.0276953 Jy
! Total flux subtracted in 100 components = 0.0276953 Jy
! Clean residual min=-0.008082 max=0.009243 Jy/beam
! Clean residual mean=0.000005 rms=0.001806 Jy/beam
! Combined flux in latest and established models = 0.476118 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 26 components and 0.476117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066377Jy  sigma=1.389863
! Fit after  self-cal, rms=0.066060Jy  sigma=1.382148
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=1.553 mas, bpa=-14.4 degrees
! Estimated noise=0.426342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144627 Jy
! Component: 100  -  total flux cleaned = 0.0237276 Jy
! Component: 150  -  total flux cleaned = 0.0304083 Jy
! Component: 200  -  total flux cleaned = 0.0353158 Jy
! Total flux subtracted in 200 components = 0.0353158 Jy
! Clean residual min=-0.005695 max=0.007516 Jy/beam
! Clean residual mean=-0.000002 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 0.511433 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 49 components and 0.511433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062180Jy  sigma=1.297819
! Fit after  self-cal, rms=0.062013Jy  sigma=1.293594
! Inverting map 
! Added new window around map position (-4.4, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798942 Jy
! Component: 100  -  total flux cleaned = 0.0125443 Jy
! Component: 150  -  total flux cleaned = 0.0160365 Jy
! Component: 200  -  total flux cleaned = 0.0189007 Jy
! Total flux subtracted in 200 components = 0.0189007 Jy
! Clean residual min=-0.005063 max=0.005959 Jy/beam
! Clean residual mean=-0.000002 rms=0.001265 Jy/beam
! Combined flux in latest and established models = 0.530334 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 68 components and 0.530334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060757Jy  sigma=1.268769
! Fit after  self-cal, rms=0.060637Jy  sigma=1.265938
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.057 x 1.553 at -14.4 degrees (North through East)
! Clean map  min=-0.0047113  max=0.42914 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.01     KP        1.00     
!   LA        0.99     MK        0.97     NL        1.01     OV        0.98     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.98     KP        0.99     
!   LA        0.98     MK        0.95     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.01     
!   LA        0.97     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.00     KP        1.00     
!   LA        0.98     MK        0.99     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.06     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.98     KP        1.01     
!   LA        0.98     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.05     NL        1.01     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.97     KP        0.99     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.98     
!   PT        0.96     SC        1.06     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.060637Jy  sigma=1.265938
! Fit after  self-cal, rms=0.059137Jy  sigma=1.233663
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.061 mas, bmaj=1.565 mas, bpa=-15.04 degrees
! Estimated noise=0.425184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.2, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00552112 Jy
! Component: 100  -  total flux cleaned = 0.0086305 Jy
! Component: 150  -  total flux cleaned = 0.0106089 Jy
! Component: 200  -  total flux cleaned = 0.011848 Jy
! Total flux subtracted in 200 components = 0.011848 Jy
! Clean residual min=-0.003242 max=0.003804 Jy/beam
! Clean residual mean=-0.000001 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.542182 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 95 components and 0.542182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058497Jy  sigma=1.219040
! Fit after  self-cal, rms=0.058475Jy  sigma=1.218439
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058475Jy  sigma=1.218439
! Fit after  self-cal, rms=0.057894Jy  sigma=1.205598
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=1.557 mas, bpa=-14.54 degrees
! Estimated noise=0.424823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238092 Jy
! Component: 100  -  total flux cleaned = 0.0039341 Jy
! Component: 150  -  total flux cleaned = 0.00457274 Jy
! Component: 200  -  total flux cleaned = 0.00508661 Jy
! Total flux subtracted in 200 components = 0.00508661 Jy
! Clean residual min=-0.002581 max=0.002535 Jy/beam
! Clean residual mean=-0.000003 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.547268 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 115 components and 0.547268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057757Jy  sigma=1.202691
! Fit after  self-cal, rms=0.057753Jy  sigma=1.202516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000830108 Jy
! Component: 100  -  total flux cleaned = 0.00112097 Jy
! Component: 150  -  total flux cleaned = 0.00130912 Jy
! Component: 200  -  total flux cleaned = 0.00137925 Jy
! Total flux subtracted in 200 components = 0.00137925 Jy
! Clean residual min=-0.002513 max=0.002383 Jy/beam
! Clean residual mean=-0.000004 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.548648 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 124 components and 0.548648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057702Jy  sigma=1.201474
! Fit after  self-cal, rms=0.057700Jy  sigma=1.201427
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057700Jy  sigma=1.201427
! Fit after  self-cal, rms=0.057718Jy  sigma=1.201166
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.062 mas, bmaj=1.557 mas, bpa=-14.54 degrees
! Estimated noise=0.424877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00094016 Jy
! Component: 100  -  total flux cleaned = 0.00126095 Jy
! Component: 150  -  total flux cleaned = 0.00132595 Jy
! Component: 200  -  total flux cleaned = 0.00138732 Jy
! Total flux subtracted in 200 components = 0.00138732 Jy
! Clean residual min=-0.002432 max=0.002369 Jy/beam
! Clean residual mean=-0.000003 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.550035 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 131 components and 0.550035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057677Jy  sigma=1.200358
! Fit after  self-cal, rms=0.057675Jy  sigma=1.200318
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000293648 Jy
! Component: 100  -  total flux cleaned = 0.000381474 Jy
! Component: 150  -  total flux cleaned = 0.000437509 Jy
! Component: 200  -  total flux cleaned = 0.000491047 Jy
! Total flux subtracted in 200 components = 0.000491047 Jy
! Clean residual min=-0.002378 max=0.002307 Jy/beam
! Clean residual mean=-0.000003 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.550526 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 137 components and 0.550526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057650Jy  sigma=1.199820
! Fit after  self-cal, rms=0.057649Jy  sigma=1.199803
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057649Jy  sigma=1.199803
! Fit after  self-cal, rms=0.057663Jy  sigma=1.199734
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.235 mas, bmaj=2.596 mas, bpa=-11.71 degrees
! Estimated noise=0.528623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000671667 Jy
! Component: 100  -  total flux cleaned = 0.00104055 Jy
! Component: 150  -  total flux cleaned = 0.00132363 Jy
! Component: 200  -  total flux cleaned = 0.00146543 Jy
! Total flux subtracted in 200 components = 0.00146543 Jy
! Clean residual min=-0.002388 max=0.002209 Jy/beam
! Clean residual mean=-0.000007 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.551991 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 145 components and 0.551991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057650Jy  sigma=1.199506
! Fit after  self-cal, rms=0.057649Jy  sigma=1.199449
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000219122 Jy
! Component: 100  -  total flux cleaned = 0.000398222 Jy
! Component: 150  -  total flux cleaned = 0.000444515 Jy
! Component: 200  -  total flux cleaned = 0.00048704 Jy
! Total flux subtracted in 200 components = 0.00048704 Jy
! Clean residual min=-0.002304 max=0.002214 Jy/beam
! Clean residual mean=-0.000006 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.552478 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 150 components and 0.552478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057644Jy  sigma=1.199383
! Fit after  self-cal, rms=0.057644Jy  sigma=1.199366
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.062 mas, bmaj=1.556 mas, bpa=-14.54 degrees
! Estimated noise=0.424883 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.062 x 1.556 at -14.54 degrees (North through East)
! Clean map  min=-0.0022781  max=0.42731 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8514 mas, bmaj=1.337 mas, bpa=-18.01 degrees
! Estimated noise=0.672593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.327706 Jy
! Component: 100  -  total flux cleaned = 0.402797 Jy
! Component: 150  -  total flux cleaned = 0.434048 Jy
! Component: 200  -  total flux cleaned = 0.454039 Jy
! Total flux subtracted in 200 components = 0.454039 Jy
! Clean residual min=-0.007960 max=0.011145 Jy/beam
! Clean residual mean=0.000011 rms=0.001845 Jy/beam
! Combined flux in latest and established models = 0.454039 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.454039 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.062 mas, bmaj=1.556 mas, bpa=-14.54 degrees
! Estimated noise=0.424883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212695 Jy
! Component: 100  -  total flux cleaned = 0.0351179 Jy
! Component: 150  -  total flux cleaned = 0.0452187 Jy
! Component: 200  -  total flux cleaned = 0.0529467 Jy
! Total flux subtracted in 200 components = 0.0529467 Jy
! Clean residual min=-0.004005 max=0.004840 Jy/beam
! Clean residual mean=0.000003 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.506985 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 48 components and 0.506985 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.235 mas, bmaj=2.596 mas, bpa=-11.71 degrees
! Estimated noise=0.528623 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111413 Jy
! Component: 100  -  total flux cleaned = 0.0187429 Jy
! Component: 150  -  total flux cleaned = 0.0244363 Jy
! Component: 200  -  total flux cleaned = 0.0288471 Jy
! Total flux subtracted in 200 components = 0.0288471 Jy
! Clean residual min=-0.003077 max=0.003291 Jy/beam
! Clean residual mean=-0.000002 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.535832 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345719 Jy
! Component: 100  -  total flux cleaned = 0.00618846 Jy
! Component: 150  -  total flux cleaned = 0.00836536 Jy
! Component: 200  -  total flux cleaned = 0.0101191 Jy
! Total flux subtracted in 200 components = 0.0101191 Jy
! Clean residual min=-0.002553 max=0.002297 Jy/beam
! Clean residual mean=-0.000005 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.545951 Jy
! Adding 116 model components to the UV plane model.
! The established model now contains 153 components and 0.545951 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.062 mas, bmaj=1.556 mas, bpa=-14.54 degrees
! Estimated noise=0.424883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150586 Jy
! Component: 100  -  total flux cleaned = 0.00228595 Jy
! Component: 150  -  total flux cleaned = 0.00272281 Jy
! Component: 200  -  total flux cleaned = 0.00311758 Jy
! Total flux subtracted in 200 components = 0.00311758 Jy
! Clean residual min=-0.002643 max=0.002310 Jy/beam
! Clean residual mean=-0.000003 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.549069 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 176 components and 0.549069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.057736Jy  sigma=1.200973
! Fit after  self-cal, rms=0.057724Jy  sigma=1.200597
wmodel /scr/pima/bg219e_uvs/J0916+3854_X_map.mod
! Writing 176 model components to file: /scr/pima/bg219e_uvs/J0916+3854_X_map.mod
wobs /scr/pima/bg219e_uvs/J0916+3854_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0916+3854_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0916+3854_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J0916+3854_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000243647 Jy
! Component: 100  -  total flux cleaned = -0.000120392 Jy
! Component: 150  -  total flux cleaned = -4.27484e-05 Jy
! Component: 200  -  total flux cleaned = 0.000143675 Jy
! Component: 250  -  total flux cleaned = 0.000251468 Jy
! Component: 300  -  total flux cleaned = 0.000252925 Jy
! Component: 350  -  total flux cleaned = 0.00045814 Jy
! Component: 400  -  total flux cleaned = 0.000524641 Jy
! Component: 450  -  total flux cleaned = 0.000557432 Jy
! Component: 500  -  total flux cleaned = 0.000621905 Jy
! Component: 550  -  total flux cleaned = 0.000654101 Jy
! Component: 600  -  total flux cleaned = 0.000777947 Jy
! Component: 650  -  total flux cleaned = 0.000898967 Jy
! Component: 700  -  total flux cleaned = 0.000957513 Jy
! Component: 750  -  total flux cleaned = 0.00101597 Jy
! Component: 800  -  total flux cleaned = 0.00110196 Jy
! Component: 850  -  total flux cleaned = 0.001187 Jy
! Component: 900  -  total flux cleaned = 0.0012983 Jy
! Component: 950  -  total flux cleaned = 0.00127046 Jy
! Component: 1000  -  total flux cleaned = 0.00132493 Jy
! Component: 1050  -  total flux cleaned = 0.00135167 Jy
! Component: 1100  -  total flux cleaned = 0.00145758 Jy
! Component: 1150  -  total flux cleaned = 0.0015095 Jy
! Component: 1200  -  total flux cleaned = 0.00153533 Jy
! Component: 1250  -  total flux cleaned = 0.00166189 Jy
! Component: 1300  -  total flux cleaned = 0.00163705 Jy
! Component: 1350  -  total flux cleaned = 0.00178491 Jy
! Component: 1400  -  total flux cleaned = 0.00180947 Jy
! Component: 1450  -  total flux cleaned = 0.00188167 Jy
! Component: 1500  -  total flux cleaned = 0.0019057 Jy
! Component: 1550  -  total flux cleaned = 0.0018826 Jy
! Component: 1600  -  total flux cleaned = 0.00199803 Jy
! Component: 1650  -  total flux cleaned = 0.00197502 Jy
! Component: 1700  -  total flux cleaned = 0.00195219 Jy
! Component: 1750  -  total flux cleaned = 0.00195235 Jy
! Component: 1800  -  total flux cleaned = 0.00199603 Jy
! Component: 1850  -  total flux cleaned = 0.0019959 Jy
! Component: 1900  -  total flux cleaned = 0.00195271 Jy
! Component: 1950  -  total flux cleaned = 0.00188903 Jy
! Component: 2000  -  total flux cleaned = 0.00182639 Jy
! Component: 2050  -  total flux cleaned = 0.00186817 Jy
! Component: 2100  -  total flux cleaned = 0.00184761 Jy
! Component: 2150  -  total flux cleaned = 0.00174604 Jy
! Component: 2200  -  total flux cleaned = 0.00176577 Jy
! Component: 2250  -  total flux cleaned = 0.00176546 Jy
! Component: 2300  -  total flux cleaned = 0.00172573 Jy
! Component: 2350  -  total flux cleaned = 0.00164774 Jy
! Component: 2400  -  total flux cleaned = 0.00168654 Jy
! Component: 2450  -  total flux cleaned = 0.00178247 Jy
! Component: 2500  -  total flux cleaned = 0.00174476 Jy
! Component: 2550  -  total flux cleaned = 0.00176368 Jy
! Component: 2600  -  total flux cleaned = 0.00180076 Jy
! Component: 2650  -  total flux cleaned = 0.00181924 Jy
! Component: 2700  -  total flux cleaned = 0.00183742 Jy
! Component: 2750  -  total flux cleaned = 0.0018375 Jy
! Component: 2800  -  total flux cleaned = 0.00185527 Jy
! Component: 2850  -  total flux cleaned = 0.00190849 Jy
! Component: 2900  -  total flux cleaned = 0.00183806 Jy
! Component: 2950  -  total flux cleaned = 0.00183799 Jy
! Component: 3000  -  total flux cleaned = 0.0018555 Jy
! Component: 3050  -  total flux cleaned = 0.00180393 Jy
! Component: 3100  -  total flux cleaned = 0.00183779 Jy
! Component: 3150  -  total flux cleaned = 0.00177039 Jy
! Component: 3200  -  total flux cleaned = 0.00178716 Jy
! Component: 3250  -  total flux cleaned = 0.00180394 Jy
! Component: 3300  -  total flux cleaned = 0.00183696 Jy
! Component: 3350  -  total flux cleaned = 0.00180453 Jy
! Component: 3400  -  total flux cleaned = 0.00185291 Jy
! Component: 3450  -  total flux cleaned = 0.0017724 Jy
! Component: 3500  -  total flux cleaned = 0.00180441 Jy
! Component: 3550  -  total flux cleaned = 0.00175678 Jy
! Component: 3600  -  total flux cleaned = 0.00174076 Jy
! Component: 3650  -  total flux cleaned = 0.00169388 Jy
! Component: 3700  -  total flux cleaned = 0.00163196 Jy
! Component: 3750  -  total flux cleaned = 0.0016627 Jy
! Component: 3800  -  total flux cleaned = 0.00158647 Jy
! Component: 3850  -  total flux cleaned = 0.00163168 Jy
! Component: 3900  -  total flux cleaned = 0.00160172 Jy
! Component: 3950  -  total flux cleaned = 0.00154194 Jy
! Component: 4000  -  total flux cleaned = 0.00154202 Jy
! Component: 4050  -  total flux cleaned = 0.00152734 Jy
! Total flux subtracted in 4096 components = 0.00152746 Jy
! Clean residual min=-0.000831 max=0.000855 Jy/beam
! Clean residual mean=-0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.550597 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 463 components and 0.550596 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0916+3854_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.062 x 1.556 at -14.54 degrees (North through East)
! Clean map  min=-0.0017419  max=0.42912 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0916+3854_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.429118 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000242882 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.169801 0.169801 0.339601 0.679203 1.35841 2.71681 5.43362 10.8672 21.7345 43.469 86.9379
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.429 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1766.78 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0916+3854_X_uvs.log closed on Thu Apr  7 09:05:01 2016