! Started logfile: /scr/pima/bg219e_uvs/J0916+3854_X_dfm.log on Thu May 19 18:33:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0916+3854_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0916+3854_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.813492 visibilities/baseline/integration-bin.
! Found source: J0916+3854
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12300 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0916+3854_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 58 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.106849Jy  sigma=23.383359
! Fit after  self-cal, rms=0.567932Jy  sigma=11.946670
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8206 mas, bmaj=1.258 mas, bpa=-17.01 degrees
! Estimated noise=0.579657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.325881 Jy
! Component: 100  -  total flux cleaned = 0.400883 Jy
! Total flux subtracted in 100 components = 0.400883 Jy
! Clean residual min=-0.013174 max=0.027645 Jy/beam
! Clean residual mean=0.000014 rms=0.003015 Jy/beam
! Combined flux in latest and established models = 0.400883 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.400883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091803Jy  sigma=1.877747
! Fit after  self-cal, rms=0.091792Jy  sigma=1.877410
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0304135 Jy
! Component: 100  -  total flux cleaned = 0.0457639 Jy
! Total flux subtracted in 100 components = 0.0457639 Jy
! Clean residual min=-0.009247 max=0.019039 Jy/beam
! Clean residual mean=0.000006 rms=0.002060 Jy/beam
! Combined flux in latest and established models = 0.446647 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.446647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076163Jy  sigma=1.544552
! Fit after  self-cal, rms=0.076120Jy  sigma=1.543468
! Inverting map 
! Added new window around map position (-2.2, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170436 Jy
! Component: 100  -  total flux cleaned = 0.0269816 Jy
! Total flux subtracted in 100 components = 0.0269816 Jy
! Clean residual min=-0.007382 max=0.008841 Jy/beam
! Clean residual mean=0.000004 rms=0.001609 Jy/beam
! Combined flux in latest and established models = 0.473629 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.473629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069742Jy  sigma=1.404801
! Fit after  self-cal, rms=0.069457Jy  sigma=1.397989
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.048 mas, bmaj=1.538 mas, bpa=-14.35 degrees
! Estimated noise=0.337386 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161447 Jy
! Component: 100  -  total flux cleaned = 0.0266757 Jy
! Component: 150  -  total flux cleaned = 0.0342965 Jy
! Component: 200  -  total flux cleaned = 0.0401355 Jy
! Total flux subtracted in 200 components = 0.0401355 Jy
! Clean residual min=-0.005680 max=0.006229 Jy/beam
! Clean residual mean=-0.000001 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 0.513764 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 54 components and 0.513764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064719Jy  sigma=1.298865
! Fit after  self-cal, rms=0.064444Jy  sigma=1.292286
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.048 x 1.538 at -14.35 degrees (North through East)
! Clean map  min=-0.0049279  max=0.43127 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.02     KP        1.00     
!   LA        0.99     MK        0.96     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        0.99     
!   LA        0.98     MK        0.94     NL        1.02     OV        0.99     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        1.01     
!   LA        0.96     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.01     KP        1.00     
!   LA        0.97     MK        0.97     NL        1.02     OV        1.00     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        1.00     
!   LA        0.96     MK        1.01     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.97     MK        0.99     NL        1.00     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        0.99     
!   LA        0.96     MK        1.04     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.96     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.00     KP        0.99     
!   LA        0.96     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.95     MK        1.02     NL        1.02     OV        0.98     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.96     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.064444Jy  sigma=1.292286
! Fit after  self-cal, rms=0.062500Jy  sigma=1.255182
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.053 mas, bmaj=1.554 mas, bpa=-15.01 degrees
! Estimated noise=0.335334 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.2, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692196 Jy
! Component: 100  -  total flux cleaned = 0.0114318 Jy
! Component: 150  -  total flux cleaned = 0.0137663 Jy
! Component: 200  -  total flux cleaned = 0.0152919 Jy
! Total flux subtracted in 200 components = 0.0152919 Jy
! Clean residual min=-0.003793 max=0.004018 Jy/beam
! Clean residual mean=-0.000000 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.529056 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 79 components and 0.529056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061552Jy  sigma=1.234355
! Fit after  self-cal, rms=0.061501Jy  sigma=1.233131
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061501Jy  sigma=1.233131
! Fit after  self-cal, rms=0.060866Jy  sigma=1.218146
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=1.543 mas, bpa=-14.53 degrees
! Estimated noise=0.335181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306417 Jy
! Component: 100  -  total flux cleaned = 0.00528205 Jy
! Component: 150  -  total flux cleaned = 0.0066025 Jy
! Component: 200  -  total flux cleaned = 0.00760784 Jy
! Total flux subtracted in 200 components = 0.00760784 Jy
! Clean residual min=-0.002494 max=0.002344 Jy/beam
! Clean residual mean=-0.000002 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.536664 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 98 components and 0.536664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060654Jy  sigma=1.213487
! Fit after  self-cal, rms=0.060647Jy  sigma=1.213228
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000968597 Jy
! Component: 100  -  total flux cleaned = 0.00178097 Jy
! Component: 150  -  total flux cleaned = 0.00246397 Jy
! Component: 200  -  total flux cleaned = 0.003047 Jy
! Total flux subtracted in 200 components = 0.003047 Jy
! Clean residual min=-0.002326 max=0.002323 Jy/beam
! Clean residual mean=-0.000002 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.539711 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 111 components and 0.539711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060592Jy  sigma=1.212075
! Fit after  self-cal, rms=0.060587Jy  sigma=1.211969
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060587Jy  sigma=1.211969
! Fit after  self-cal, rms=0.060634Jy  sigma=1.211570
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.542 mas, bpa=-14.49 degrees
! Estimated noise=0.335286 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000912526 Jy
! Component: 100  -  total flux cleaned = 0.00154655 Jy
! Component: 150  -  total flux cleaned = 0.00204593 Jy
! Component: 200  -  total flux cleaned = 0.00237221 Jy
! Total flux subtracted in 200 components = 0.00237221 Jy
! Clean residual min=-0.002175 max=0.002288 Jy/beam
! Clean residual mean=-0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.542083 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 123 components and 0.542083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060594Jy  sigma=1.210811
! Fit after  self-cal, rms=0.060592Jy  sigma=1.210745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205107 Jy
! Component: 100  -  total flux cleaned = 0.00295331 Jy
! Component: 150  -  total flux cleaned = 0.00347605 Jy
! Component: 200  -  total flux cleaned = 0.00381495 Jy
! Total flux subtracted in 200 components = 0.00381495 Jy
! Clean residual min=-0.002036 max=0.002193 Jy/beam
! Clean residual mean=-0.000002 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.545898 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 138 components and 0.545898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060505Jy  sigma=1.209246
! Fit after  self-cal, rms=0.060502Jy  sigma=1.209131
! Inverting map 
! Added new window around map position (5.8, -27.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169266 Jy
! Component: 100  -  total flux cleaned = 0.00209527 Jy
! Component: 150  -  total flux cleaned = 0.0022472 Jy
! Component: 200  -  total flux cleaned = 0.00247896 Jy
! Total flux subtracted in 200 components = 0.00247896 Jy
! Clean residual min=-0.002088 max=0.001941 Jy/beam
! Clean residual mean=-0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.548377 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 155 components and 0.548377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060423Jy  sigma=1.207671
! Fit after  self-cal, rms=0.060419Jy  sigma=1.207577
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060419Jy  sigma=1.207577
! Fit after  self-cal, rms=0.060416Jy  sigma=1.207348
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.242 mas, bmaj=2.592 mas, bpa=-12.57 degrees
! Estimated noise=0.415944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012935 Jy
! Component: 100  -  total flux cleaned = 0.00211176 Jy
! Component: 150  -  total flux cleaned = 0.00267564 Jy
! Component: 200  -  total flux cleaned = 0.00315201 Jy
! Total flux subtracted in 200 components = 0.00315201 Jy
! Clean residual min=-0.002075 max=0.001833 Jy/beam
! Clean residual mean=-0.000002 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.551529 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 173 components and 0.551529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060399Jy  sigma=1.206967
! Fit after  self-cal, rms=0.060398Jy  sigma=1.206927
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301172 Jy
! Component: 100  -  total flux cleaned = 0.000688181 Jy
! Component: 150  -  total flux cleaned = 0.000930188 Jy
! Component: 200  -  total flux cleaned = 0.00104794 Jy
! Total flux subtracted in 200 components = 0.00104794 Jy
! Clean residual min=-0.002072 max=0.001711 Jy/beam
! Clean residual mean=-0.000002 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.552577 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 180 components and 0.552577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060390Jy  sigma=1.206808
! Fit after  self-cal, rms=0.060389Jy  sigma=1.206789
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.542 mas, bpa=-14.5 degrees
! Estimated noise=0.335327 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.056 x 1.542 at -14.5 degrees (North through East)
! Clean map  min=-0.0017942  max=0.4278 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8259 mas, bmaj=1.258 mas, bpa=-17 degrees
! Estimated noise=0.579861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.325822 Jy
! Component: 100  -  total flux cleaned = 0.400528 Jy
! Component: 150  -  total flux cleaned = 0.431369 Jy
! Component: 200  -  total flux cleaned = 0.451043 Jy
! Total flux subtracted in 200 components = 0.451043 Jy
! Clean residual min=-0.006741 max=0.011315 Jy/beam
! Clean residual mean=0.000007 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 0.451043 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.451043 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.542 mas, bpa=-14.5 degrees
! Estimated noise=0.335327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220456 Jy
! Component: 100  -  total flux cleaned = 0.0360476 Jy
! Component: 150  -  total flux cleaned = 0.0460327 Jy
! Component: 200  -  total flux cleaned = 0.0536527 Jy
! Total flux subtracted in 200 components = 0.0536527 Jy
! Clean residual min=-0.003754 max=0.005233 Jy/beam
! Clean residual mean=0.000001 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.504695 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 47 components and 0.504695 Jy
! Inverting map 
! Added new window around map position (-1, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620913 Jy
! Component: 100  -  total flux cleaned = 0.0111957 Jy
! Component: 150  -  total flux cleaned = 0.0153838 Jy
! Component: 200  -  total flux cleaned = 0.0189479 Jy
! Total flux subtracted in 200 components = 0.0189479 Jy
! Clean residual min=-0.002693 max=0.002799 Jy/beam
! Clean residual mean=0.000000 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.523643 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 89 components and 0.523643 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.242 mas, bmaj=2.592 mas, bpa=-12.57 degrees
! Estimated noise=0.415944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00547321 Jy
! Component: 100  -  total flux cleaned = 0.00938062 Jy
! Component: 150  -  total flux cleaned = 0.0124437 Jy
! Component: 200  -  total flux cleaned = 0.0149228 Jy
! Total flux subtracted in 200 components = 0.0149228 Jy
! Clean residual min=-0.002647 max=0.002324 Jy/beam
! Clean residual mean=-0.000002 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.538566 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203618 Jy
! Component: 100  -  total flux cleaned = 0.00373465 Jy
! Component: 150  -  total flux cleaned = 0.00517191 Jy
! Component: 200  -  total flux cleaned = 0.00640162 Jy
! Total flux subtracted in 200 components = 0.00640162 Jy
! Clean residual min=-0.002367 max=0.001919 Jy/beam
! Clean residual mean=-0.000002 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.544968 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 186 components and 0.544968 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=1.542 mas, bpa=-14.5 degrees
! Estimated noise=0.335327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128163 Jy
! Component: 100  -  total flux cleaned = 0.00184436 Jy
! Component: 150  -  total flux cleaned = 0.0021918 Jy
! Component: 200  -  total flux cleaned = 0.00251391 Jy
! Total flux subtracted in 200 components = 0.00251391 Jy
! Clean residual min=-0.002003 max=0.001959 Jy/beam
! Clean residual mean=-0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.547482 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 213 components and 0.547482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060469Jy  sigma=1.207954
! Fit after  self-cal, rms=0.060457Jy  sigma=1.207689
wmodel /J0916+3854_X_map.mod
! wmodel: Unable to open new model file: /J0916+3854_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0916+3854_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.056 x 1.542 at -14.5 degrees (North through East)
! Clean map  min=-0.0018367  max=0.42852 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0916+3854_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.428517 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000457871 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.32055 0.32055 0.641101 1.2822 2.5644 5.1288 10.2576 20.5152 41.0304 82.0609
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.428 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  935.89 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0916+3854_X_dfm.log closed on Thu May 19 18:33:19 2016