! Started logfile: /scr/pima/bg219e_uvs/J0911+1958_X_uvs.log on Thu Apr  7 09:04:42 2016
obs /scr/pima/bg219e_uvs/J0911+1958_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0911+1958_X_uva.fits
! AN table 1: 29 integrations on 28 of 28 possible baselines.
! AN table 2: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.877694 visibilities/baseline/integration-bin.
! Found source: J0911+1958
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19548 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0911+1958_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.004452Jy  sigma=24.164164
! Fit after  self-cal, rms=0.923504Jy  sigma=22.206411
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.769 mas, bmaj=2.084 mas, bpa=-13.9 degrees
! Estimated noise=0.499821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.059577 Jy
! Component: 100  -  total flux cleaned = 0.0734892 Jy
! Total flux subtracted in 100 components = 0.0734892 Jy
! Clean residual min=-0.006249 max=0.015257 Jy/beam
! Clean residual mean=0.000011 rms=0.001824 Jy/beam
! Combined flux in latest and established models = 0.0734892 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0734892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066827Jy  sigma=1.528432
! Fit after  self-cal, rms=0.066370Jy  sigma=1.519284
! Inverting map 
! Added new window around map position (3.2, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131553 Jy
! Component: 100  -  total flux cleaned = 0.0204294 Jy
! Total flux subtracted in 100 components = 0.0204294 Jy
! Clean residual min=-0.004619 max=0.006086 Jy/beam
! Clean residual mean=0.000010 rms=0.001305 Jy/beam
! Combined flux in latest and established models = 0.0939186 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 0.0939186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062869Jy  sigma=1.430567
! Fit after  self-cal, rms=0.062531Jy  sigma=1.421677
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9725 mas, bmaj=2.28 mas, bpa=-13.1 degrees
! Estimated noise=0.287827 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943631 Jy
! Component: 100  -  total flux cleaned = 0.0147665 Jy
! Component: 150  -  total flux cleaned = 0.018293 Jy
! Component: 200  -  total flux cleaned = 0.0207429 Jy
! Total flux subtracted in 200 components = 0.0207429 Jy
! Clean residual min=-0.003591 max=0.007742 Jy/beam
! Clean residual mean=0.000009 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.114662 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 36 components and 0.114662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061035Jy  sigma=1.384156
! Fit after  self-cal, rms=0.060843Jy  sigma=1.378734
! Inverting map 
! Added new window around map position (5.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798812 Jy
! Component: 100  -  total flux cleaned = 0.0121514 Jy
! Component: 150  -  total flux cleaned = 0.0149114 Jy
! Component: 200  -  total flux cleaned = 0.0170544 Jy
! Total flux subtracted in 200 components = 0.0170544 Jy
! Clean residual min=-0.002504 max=0.002894 Jy/beam
! Clean residual mean=0.000003 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.131716 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 78 components and 0.131716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059791Jy  sigma=1.351397
! Fit after  self-cal, rms=0.059626Jy  sigma=1.347585
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9725 x 2.28 at -13.1 degrees (North through East)
! Clean map  min=-0.0024085  max=0.078406 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.02     KP        0.98     
!   LA        0.92     NL        1.08     OV        1.06     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.11     HN        1.05     KP        0.95     
!   LA        0.94     MK        0.96     NL        1.10     OV        0.98     
!   SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.05     KP        0.96     
!   LA        0.94     NL        1.02     OV        1.02     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.06     HN        1.03     KP        1.01     
!   LA        0.96     MK        0.92     NL        1.03     OV        0.96     
!   SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.10     KP        0.94     
!   LA        0.90     NL        1.03     OV        1.07     PT        0.90     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.04     HN        0.94     KP        1.03     
!   LA        0.93     MK        1.03     NL        0.99     OV        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        0.95     KP        0.99     
!   LA        1.01     NL        1.05     OV        0.95     PT        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.07     HN        1.06     KP        1.07     
!   LA        0.94     MK        0.92     NL        1.14     OV        0.96     
!   SC        1.03     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.95     NL        1.04     OV        0.99     PT        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.05     HN        1.14     KP        0.92     
!   LA        1.00     MK        0.96     NL        1.03     OV        1.03     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.95     NL        0.99     OV        0.99     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        1.11     HN        0.92     KP        0.98     
!   LA        0.97     MK        1.05     NL        1.03     OV        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.86     KP        0.95     
!   LA        0.97     NL        1.07     OV        1.03     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   SC        1.00*    
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059626Jy  sigma=1.347585
! Fit after  self-cal, rms=0.059453Jy  sigma=1.339171
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9736 mas, bmaj=2.294 mas, bpa=-13.16 degrees
! Estimated noise=0.283808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200398 Jy
! Component: 100  -  total flux cleaned = 0.00320723 Jy
! Component: 150  -  total flux cleaned = 0.00369831 Jy
! Component: 200  -  total flux cleaned = 0.00384804 Jy
! Total flux subtracted in 200 components = 0.00384804 Jy
! Clean residual min=-0.002013 max=0.001789 Jy/beam
! Clean residual mean=0.000003 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.135564 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 103 components and 0.135564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059358Jy  sigma=1.336852
! Fit after  self-cal, rms=0.059397Jy  sigma=1.336281
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059397Jy  sigma=1.336281
! Fit after  self-cal, rms=0.059333Jy  sigma=1.336191
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9722 mas, bmaj=2.293 mas, bpa=-13.19 degrees
! Estimated noise=0.283384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112177 Jy
! Component: 100  -  total flux cleaned = 0.00172406 Jy
! Component: 150  -  total flux cleaned = 0.00181614 Jy
! Component: 200  -  total flux cleaned = 0.0018972 Jy
! Total flux subtracted in 200 components = 0.0018972 Jy
! Clean residual min=-0.001983 max=0.001718 Jy/beam
! Clean residual mean=0.000003 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.137461 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 114 components and 0.137461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059289Jy  sigma=1.335209
! Fit after  self-cal, rms=0.059289Jy  sigma=1.335062
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000461066 Jy
! Component: 100  -  total flux cleaned = 0.000619502 Jy
! Component: 150  -  total flux cleaned = 0.000686673 Jy
! Component: 200  -  total flux cleaned = 0.000725243 Jy
! Total flux subtracted in 200 components = 0.000725243 Jy
! Clean residual min=-0.001959 max=0.001645 Jy/beam
! Clean residual mean=0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.138186 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 128 components and 0.138186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059268Jy  sigma=1.334603
! Fit after  self-cal, rms=0.059266Jy  sigma=1.334533
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059266Jy  sigma=1.334533
! Fit after  self-cal, rms=0.059152Jy  sigma=1.334432
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.972 mas, bmaj=2.292 mas, bpa=-13.21 degrees
! Estimated noise=0.28273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000481424 Jy
! Component: 100  -  total flux cleaned = 0.000764427 Jy
! Component: 150  -  total flux cleaned = 0.000838632 Jy
! Component: 200  -  total flux cleaned = 0.00087265 Jy
! Total flux subtracted in 200 components = 0.00087265 Jy
! Clean residual min=-0.001926 max=0.001642 Jy/beam
! Clean residual mean=0.000003 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.139059 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 136 components and 0.139059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059136Jy  sigma=1.334104
! Fit after  self-cal, rms=0.059136Jy  sigma=1.334055
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025525 Jy
! Component: 100  -  total flux cleaned = 0.000336978 Jy
! Component: 150  -  total flux cleaned = 0.000379547 Jy
! Component: 200  -  total flux cleaned = 0.000405255 Jy
! Total flux subtracted in 200 components = 0.000405255 Jy
! Clean residual min=-0.001907 max=0.001592 Jy/beam
! Clean residual mean=0.000003 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.139464 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 140 components and 0.139464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059128Jy  sigma=1.333883
! Fit after  self-cal, rms=0.059126Jy  sigma=1.333859
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059126Jy  sigma=1.333859
! Fit after  self-cal, rms=0.059067Jy  sigma=1.333814
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.168 mas, bmaj=2.95 mas, bpa=-6.73 degrees
! Estimated noise=0.339452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115809 Jy
! Component: 100  -  total flux cleaned = 0.000113112 Jy
! Component: 150  -  total flux cleaned = 0.000142416 Jy
! Component: 200  -  total flux cleaned = 0.000192705 Jy
! Total flux subtracted in 200 components = 0.000192705 Jy
! Clean residual min=-0.001550 max=0.001755 Jy/beam
! Clean residual mean=0.000004 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.139657 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 158 components and 0.139657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059065Jy  sigma=1.333771
! Fit after  self-cal, rms=0.059064Jy  sigma=1.333651
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-26.6, 17.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144134 Jy
! Component: 100  -  total flux cleaned = 0.00159275 Jy
! Component: 150  -  total flux cleaned = 0.00154683 Jy
! Component: 200  -  total flux cleaned = 0.00158706 Jy
! Total flux subtracted in 200 components = 0.00158706 Jy
! Clean residual min=-0.001247 max=0.001425 Jy/beam
! Clean residual mean=0.000002 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.141244 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 178 components and 0.141244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.059028Jy  sigma=1.332817
! Fit after  self-cal, rms=0.058999Jy  sigma=1.332464
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9721 mas, bmaj=2.292 mas, bpa=-13.24 degrees
! Estimated noise=0.282222 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9721 x 2.292 at -13.24 degrees (North through East)
! Clean map  min=-0.0015314  max=0.076808 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7678 mas, bmaj=2.09 mas, bpa=-13.95 degrees
! Estimated noise=0.491473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0582175 Jy
! Component: 100  -  total flux cleaned = 0.0770558 Jy
! Component: 150  -  total flux cleaned = 0.0888817 Jy
! Component: 200  -  total flux cleaned = 0.0974863 Jy
! Total flux subtracted in 200 components = 0.0974863 Jy
! Clean residual min=-0.004141 max=0.005922 Jy/beam
! Clean residual mean=0.000010 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.0974863 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0974863 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9721 mas, bmaj=2.292 mas, bpa=-13.24 degrees
! Estimated noise=0.282222 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00997867 Jy
! Component: 100  -  total flux cleaned = 0.0169443 Jy
! Component: 150  -  total flux cleaned = 0.0221032 Jy
! Component: 200  -  total flux cleaned = 0.0260733 Jy
! Total flux subtracted in 200 components = 0.0260733 Jy
! Clean residual min=-0.002320 max=0.003408 Jy/beam
! Clean residual mean=0.000006 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.12356 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 47 components and 0.12356 Jy
! Inverting map 
! Added new window around map position (1.6, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00341861 Jy
! Component: 100  -  total flux cleaned = 0.00596587 Jy
! Component: 150  -  total flux cleaned = 0.00785044 Jy
! Component: 200  -  total flux cleaned = 0.00945485 Jy
! Total flux subtracted in 200 components = 0.00945485 Jy
! Clean residual min=-0.001721 max=0.001751 Jy/beam
! Clean residual mean=0.000004 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.133014 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 81 components and 0.133014 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.168 mas, bmaj=2.95 mas, bpa=-6.73 degrees
! Estimated noise=0.339452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238483 Jy
! Component: 100  -  total flux cleaned = 0.00407264 Jy
! Component: 150  -  total flux cleaned = 0.00540647 Jy
! Component: 200  -  total flux cleaned = 0.00649869 Jy
! Total flux subtracted in 200 components = 0.00649869 Jy
! Clean residual min=-0.001579 max=0.001409 Jy/beam
! Clean residual mean=0.000003 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.139513 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000908636 Jy
! Component: 100  -  total flux cleaned = 0.0013761 Jy
! Component: 150  -  total flux cleaned = 0.00162157 Jy
! Component: 200  -  total flux cleaned = 0.00169466 Jy
! Total flux subtracted in 200 components = 0.00169466 Jy
! Clean residual min=-0.001382 max=0.001309 Jy/beam
! Clean residual mean=0.000002 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.141208 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 158 components and 0.141208 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9721 mas, bmaj=2.292 mas, bpa=-13.24 degrees
! Estimated noise=0.282222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000613148 Jy
! Component: 100  -  total flux cleaned = -0.000705844 Jy
! Component: 150  -  total flux cleaned = -0.000761521 Jy
! Component: 200  -  total flux cleaned = -0.000812914 Jy
! Total flux subtracted in 200 components = -0.000812914 Jy
! Clean residual min=-0.001491 max=0.001341 Jy/beam
! Clean residual mean=0.000002 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.140395 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 186 components and 0.140395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.058993Jy  sigma=1.332382
! Fit after  self-cal, rms=0.058999Jy  sigma=1.332208
wmodel /scr/pima/bg219e_uvs/J0911+1958_X_map.mod
! Writing 186 model components to file: /scr/pima/bg219e_uvs/J0911+1958_X_map.mod
wobs /scr/pima/bg219e_uvs/J0911+1958_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0911+1958_X_uvs.fits
wwins /scr/pima/bg219e_uvs/J0911+1958_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219e_uvs/J0911+1958_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000479707 Jy
! Component: 100  -  total flux cleaned = -0.000546102 Jy
! Component: 150  -  total flux cleaned = -0.000648622 Jy
! Component: 200  -  total flux cleaned = -0.000766255 Jy
! Component: 250  -  total flux cleaned = -0.000823234 Jy
! Component: 300  -  total flux cleaned = -0.000786749 Jy
! Component: 350  -  total flux cleaned = -0.000769406 Jy
! Component: 400  -  total flux cleaned = -0.00073447 Jy
! Component: 450  -  total flux cleaned = -0.000684108 Jy
! Component: 500  -  total flux cleaned = -0.000667689 Jy
! Component: 550  -  total flux cleaned = -0.000619303 Jy
! Component: 600  -  total flux cleaned = -0.000525394 Jy
! Component: 650  -  total flux cleaned = -0.000448968 Jy
! Component: 700  -  total flux cleaned = -0.000359277 Jy
! Component: 750  -  total flux cleaned = -0.00033016 Jy
! Component: 800  -  total flux cleaned = -0.000301559 Jy
! Component: 850  -  total flux cleaned = -0.000273313 Jy
! Component: 900  -  total flux cleaned = -0.000273128 Jy
! Component: 950  -  total flux cleaned = -0.000232252 Jy
! Component: 1000  -  total flux cleaned = -0.000138881 Jy
! Component: 1050  -  total flux cleaned = -0.000165406 Jy
! Component: 1100  -  total flux cleaned = -0.000165735 Jy
! Component: 1150  -  total flux cleaned = -0.000217187 Jy
! Component: 1200  -  total flux cleaned = -0.000229865 Jy
! Component: 1250  -  total flux cleaned = -0.000267318 Jy
! Component: 1300  -  total flux cleaned = -0.000304363 Jy
! Component: 1350  -  total flux cleaned = -0.000365145 Jy
! Component: 1400  -  total flux cleaned = -0.000401333 Jy
! Component: 1450  -  total flux cleaned = -0.000472757 Jy
! Component: 1500  -  total flux cleaned = -0.000460867 Jy
! Component: 1550  -  total flux cleaned = -0.000496048 Jy
! Component: 1600  -  total flux cleaned = -0.000542388 Jy
! Component: 1650  -  total flux cleaned = -0.000565386 Jy
! Component: 1700  -  total flux cleaned = -0.000622087 Jy
! Component: 1750  -  total flux cleaned = -0.000677795 Jy
! Component: 1800  -  total flux cleaned = -0.000722037 Jy
! Component: 1850  -  total flux cleaned = -0.00076594 Jy
! Component: 1900  -  total flux cleaned = -0.000809454 Jy
! Component: 1950  -  total flux cleaned = -0.000863237 Jy
! Component: 2000  -  total flux cleaned = -0.000884507 Jy
! Component: 2050  -  total flux cleaned = -0.000905632 Jy
! Component: 2100  -  total flux cleaned = -0.000947625 Jy
! Component: 2150  -  total flux cleaned = -0.000968342 Jy
! Component: 2200  -  total flux cleaned = -0.000958173 Jy
! Component: 2250  -  total flux cleaned = -0.000988827 Jy
! Component: 2300  -  total flux cleaned = -0.00100907 Jy
! Component: 2350  -  total flux cleaned = -0.00105912 Jy
! Component: 2400  -  total flux cleaned = -0.00107898 Jy
! Component: 2450  -  total flux cleaned = -0.00109874 Jy
! Component: 2500  -  total flux cleaned = -0.00111834 Jy
! Component: 2550  -  total flux cleaned = -0.00115732 Jy
! Component: 2600  -  total flux cleaned = -0.00120541 Jy
! Component: 2650  -  total flux cleaned = -0.00123401 Jy
! Component: 2700  -  total flux cleaned = -0.00128136 Jy
! Component: 2750  -  total flux cleaned = -0.00130016 Jy
! Component: 2800  -  total flux cleaned = -0.00133764 Jy
! Component: 2850  -  total flux cleaned = -0.00138408 Jy
! Component: 2900  -  total flux cleaned = -0.00143935 Jy
! Component: 2950  -  total flux cleaned = -0.0014577 Jy
! Component: 3000  -  total flux cleaned = -0.00149413 Jy
! Component: 3050  -  total flux cleaned = -0.00154809 Jy
! Component: 3100  -  total flux cleaned = -0.00154806 Jy
! Component: 3150  -  total flux cleaned = -0.00155707 Jy
! Component: 3200  -  total flux cleaned = -0.00160133 Jy
! Component: 3250  -  total flux cleaned = -0.00163656 Jy
! Component: 3300  -  total flux cleaned = -0.00165406 Jy
! Component: 3350  -  total flux cleaned = -0.00168875 Jy
! Component: 3400  -  total flux cleaned = -0.00169741 Jy
! Component: 3450  -  total flux cleaned = -0.00171457 Jy
! Component: 3500  -  total flux cleaned = -0.00176587 Jy
! Component: 3550  -  total flux cleaned = -0.00179129 Jy
! Component: 3600  -  total flux cleaned = -0.00180819 Jy
! Component: 3650  -  total flux cleaned = -0.00183342 Jy
! Component: 3700  -  total flux cleaned = -0.00186684 Jy
! Component: 3750  -  total flux cleaned = -0.00190833 Jy
! Component: 3800  -  total flux cleaned = -0.00192489 Jy
! Component: 3850  -  total flux cleaned = -0.00196599 Jy
! Component: 3900  -  total flux cleaned = -0.00196592 Jy
! Component: 3950  -  total flux cleaned = -0.00199027 Jy
! Component: 4000  -  total flux cleaned = -0.00199026 Jy
! Component: 4050  -  total flux cleaned = -0.00199833 Jy
! Total flux subtracted in 4096 components = -0.00204648 Jy
! Clean residual min=-0.000509 max=0.000449 Jy/beam
! Clean residual mean=0.000001 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.138348 Jy
keep
! Adding 249 model components to the UV plane model.
! The established model now contains 435 components and 0.138348 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0911+1958_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9721 x 2.292 at -13.24 degrees (North through East)
! Clean map  min=-0.00094228  max=0.076287 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0911+1958_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0762871 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000133473 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.524884 0.524884 1.04977 2.09953 4.19907 8.39814 16.7963 33.5925 67.1851
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  571.555 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0911+1958_X_uvs.log closed on Thu Apr  7 09:04:47 2016