! Started logfile: /scr/pima/bg219e_uvs/J0858-1950_X_dfm.log on Thu May 19 18:32:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0858-1950_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0858-1950_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.897817 visibilities/baseline/integration-bin.
! Found source: J0858-1950
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10860 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0858-1950_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.460410Jy  sigma=22.783709
! Fit after  self-cal, rms=0.122499Jy  sigma=1.877438
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7925 mas, bmaj=3.038 mas, bpa=16.59 degrees
! Estimated noise=0.812057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.785291 Jy
! Component: 100  -  total flux cleaned = 0.961637 Jy
! Total flux subtracted in 100 components = 0.961637 Jy
! Clean residual min=-0.020181 max=0.062027 Jy/beam
! Clean residual mean=-0.000058 rms=0.006002 Jy/beam
! Combined flux in latest and established models = 0.961637 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.961637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138993Jy  sigma=2.145027
! Fit after  self-cal, rms=0.138928Jy  sigma=2.144231
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0630727 Jy
! Component: 100  -  total flux cleaned = 0.0934972 Jy
! Total flux subtracted in 100 components = 0.0934972 Jy
! Clean residual min=-0.011731 max=0.019156 Jy/beam
! Clean residual mean=-0.000030 rms=0.002999 Jy/beam
! Combined flux in latest and established models = 1.05513 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 1.05513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095837Jy  sigma=1.432472
! Fit after  self-cal, rms=0.095663Jy  sigma=1.430034
! Inverting map 
! Added new window around map position (-10.4, 16.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212892 Jy
! Component: 100  -  total flux cleaned = 0.0365531 Jy
! Total flux subtracted in 100 components = 0.0365531 Jy
! Clean residual min=-0.009688 max=0.014379 Jy/beam
! Clean residual mean=-0.000020 rms=0.002339 Jy/beam
! Combined flux in latest and established models = 1.09169 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 1.09169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087625Jy  sigma=1.299338
! Fit after  self-cal, rms=0.087513Jy  sigma=1.297337
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.01 mas, bmaj=3.377 mas, bpa=14.82 degrees
! Estimated noise=0.48853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.4, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199807 Jy
! Component: 100  -  total flux cleaned = 0.0329911 Jy
! Component: 150  -  total flux cleaned = 0.0420897 Jy
! Component: 200  -  total flux cleaned = 0.0462143 Jy
! Total flux subtracted in 200 components = 0.0462143 Jy
! Clean residual min=-0.007007 max=0.009241 Jy/beam
! Clean residual mean=-0.000017 rms=0.001846 Jy/beam
! Combined flux in latest and established models = 1.1379 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 71 components and 1.1379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081868Jy  sigma=1.208816
! Fit after  self-cal, rms=0.081822Jy  sigma=1.208076
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.01 x 3.377 at 14.82 degrees (North through East)
! Clean map  min=-0.0066189  max=1.0135 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.00     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        1.01     
!   LA        1.00     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.04     KP        0.99     
!   LA        0.98     NL        0.99     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.03     KP        1.00     
!   LA        0.99     NL        1.01     OV        1.00     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.98     NL        1.00     OV        0.99     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        1.00     
!   LA        0.98     NL        1.00     OV        0.99     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.01     OV        1.00     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        1.00     
!   LA        0.98     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.98     NL        1.00     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.01     KP        1.01     
!   LA        0.99     NL        1.01     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.98     NL        1.01     OV        0.98     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        1.01     
!   LA        0.98     NL        1.00     OV        1.00     PT        1.00     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.081822Jy  sigma=1.208076
! Fit after  self-cal, rms=0.080024Jy  sigma=1.170613
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=3.393 mas, bpa=14.87 degrees
! Estimated noise=0.487965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.006063 Jy
! Component: 100  -  total flux cleaned = -0.0093701 Jy
! Component: 150  -  total flux cleaned = -0.0104357 Jy
! Component: 200  -  total flux cleaned = -0.0108981 Jy
! Total flux subtracted in 200 components = -0.0108981 Jy
! Clean residual min=-0.005657 max=0.006283 Jy/beam
! Clean residual mean=-0.000007 rms=0.001376 Jy/beam
! Combined flux in latest and established models = 1.127 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 106 components and 1.127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079367Jy  sigma=1.161255
! Fit after  self-cal, rms=0.079357Jy  sigma=1.161065
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079357Jy  sigma=1.161065
! Fit after  self-cal, rms=0.077905Jy  sigma=1.138256
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=3.393 mas, bpa=14.85 degrees
! Estimated noise=0.487685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00124628 Jy
! Component: 100  -  total flux cleaned = -0.00206065 Jy
! Component: 150  -  total flux cleaned = -0.00256606 Jy
! Component: 200  -  total flux cleaned = -0.00275328 Jy
! Total flux subtracted in 200 components = -0.00275328 Jy
! Clean residual min=-0.003925 max=0.004461 Jy/beam
! Clean residual mean=-0.000006 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 1.12425 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 121 components and 1.12425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077732Jy  sigma=1.135336
! Fit after  self-cal, rms=0.077725Jy  sigma=1.135233
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.8, 21.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206419 Jy
! Component: 100  -  total flux cleaned = 0.00219724 Jy
! Component: 150  -  total flux cleaned = 0.00159201 Jy
! Component: 200  -  total flux cleaned = 0.00151879 Jy
! Total flux subtracted in 200 components = 0.00151879 Jy
! Clean residual min=-0.003517 max=0.003892 Jy/beam
! Clean residual mean=-0.000007 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 1.12577 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 141 components and 1.12577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077404Jy  sigma=1.130103
! Fit after  self-cal, rms=0.077398Jy  sigma=1.129880
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077398Jy  sigma=1.129880
! Fit after  self-cal, rms=0.077291Jy  sigma=1.127626
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=3.394 mas, bpa=14.87 degrees
! Estimated noise=0.487409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000312139 Jy
! Component: 100  -  total flux cleaned = 0.000204958 Jy
! Component: 150  -  total flux cleaned = 0.000464149 Jy
! Component: 200  -  total flux cleaned = 0.000755583 Jy
! Total flux subtracted in 200 components = 0.000755583 Jy
! Clean residual min=-0.003217 max=0.003334 Jy/beam
! Clean residual mean=-0.000006 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 1.12652 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 155 components and 1.12652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077169Jy  sigma=1.125652
! Fit after  self-cal, rms=0.077163Jy  sigma=1.125567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000319491 Jy
! Component: 100  -  total flux cleaned = 0.000424071 Jy
! Component: 150  -  total flux cleaned = 0.000522464 Jy
! Component: 200  -  total flux cleaned = 0.000570639 Jy
! Total flux subtracted in 200 components = 0.000570639 Jy
! Clean residual min=-0.003169 max=0.003281 Jy/beam
! Clean residual mean=-0.000007 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 1.1271 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 169 components and 1.1271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077103Jy  sigma=1.124645
! Fit after  self-cal, rms=0.077100Jy  sigma=1.124610
! Inverting map 
! Added new window around map position (-23.2, -17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268244 Jy
! Component: 100  -  total flux cleaned = 0.00330597 Jy
! Component: 150  -  total flux cleaned = 0.00382742 Jy
! Component: 200  -  total flux cleaned = 0.00425619 Jy
! Total flux subtracted in 200 components = 0.00425619 Jy
! Clean residual min=-0.003027 max=0.002779 Jy/beam
! Clean residual mean=-0.000006 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 1.13135 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 193 components and 1.13135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076974Jy  sigma=1.122597
! Fit after  self-cal, rms=0.076966Jy  sigma=1.122475
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076966Jy  sigma=1.122475
! Fit after  self-cal, rms=0.076931Jy  sigma=1.122067
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.237 mas, bmaj=4.737 mas, bpa=2.987 degrees
! Estimated noise=0.58926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275822 Jy
! Component: 100  -  total flux cleaned = 0.000858987 Jy
! Component: 150  -  total flux cleaned = 0.00125271 Jy
! Component: 200  -  total flux cleaned = 0.00152689 Jy
! Total flux subtracted in 200 components = 0.00152689 Jy
! Clean residual min=-0.003033 max=0.003048 Jy/beam
! Clean residual mean=-0.000010 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 1.13288 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 215 components and 1.13288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076883Jy  sigma=1.121286
! Fit after  self-cal, rms=0.076879Jy  sigma=1.121227
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000237377 Jy
! Component: 100  -  total flux cleaned = 0.000448344 Jy
! Component: 150  -  total flux cleaned = 0.000578278 Jy
! Component: 200  -  total flux cleaned = 0.000759393 Jy
! Total flux subtracted in 200 components = 0.000759393 Jy
! Clean residual min=-0.002968 max=0.002900 Jy/beam
! Clean residual mean=-0.000010 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 1.13364 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 229 components and 1.13364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076858Jy  sigma=1.120887
! Fit after  self-cal, rms=0.076855Jy  sigma=1.120863
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.013 mas, bmaj=3.395 mas, bpa=14.88 degrees
! Estimated noise=0.487158 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.013 x 3.395 at 14.88 degrees (North through East)
! Clean map  min=-0.00351  max=1.0121 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076855Jy  sigma=1.120863
! Fit after  self-cal, rms=0.071463Jy  sigma=1.019066
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=3.395 mas, bpa=14.92 degrees
! Estimated noise=0.485224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00233144 Jy
! Component: 100  -  total flux cleaned = -0.00192193 Jy
! Component: 150  -  total flux cleaned = -0.00133599 Jy
! Component: 200  -  total flux cleaned = -0.00074932 Jy
! Total flux subtracted in 200 components = -0.00074932 Jy
! Clean residual min=-0.003023 max=0.002579 Jy/beam
! Clean residual mean=-0.000004 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 1.13289 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 257 components and 1.13289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071308Jy  sigma=1.016444
! Fit after  self-cal, rms=0.071308Jy  sigma=1.016412
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00036303 Jy
! Component: 100  -  total flux cleaned = 0.000795737 Jy
! Component: 150  -  total flux cleaned = 0.00102362 Jy
! Component: 200  -  total flux cleaned = 0.00136737 Jy
! Total flux subtracted in 200 components = 0.00136737 Jy
! Clean residual min=-0.002873 max=0.002513 Jy/beam
! Clean residual mean=-0.000004 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 1.13426 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 268 components and 1.13426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071252Jy  sigma=1.015579
! Fit after  self-cal, rms=0.071251Jy  sigma=1.015561
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071251Jy  sigma=1.015561
! Fit after  self-cal, rms=0.071010Jy  sigma=1.014405
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7918 mas, bmaj=3.05 mas, bpa=16.66 degrees
! Estimated noise=0.807994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.781276 Jy
! Component: 100  -  total flux cleaned = 0.95812 Jy
! Component: 150  -  total flux cleaned = 1.02188 Jy
! Component: 200  -  total flux cleaned = 1.05027 Jy
! Total flux subtracted in 200 components = 1.05027 Jy
! Clean residual min=-0.010074 max=0.014053 Jy/beam
! Clean residual mean=-0.000021 rms=0.002163 Jy/beam
! Combined flux in latest and established models = 1.05027 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 1.05027 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=3.395 mas, bpa=14.93 degrees
! Estimated noise=0.483899 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230207 Jy
! Component: 100  -  total flux cleaned = 0.0371471 Jy
! Component: 150  -  total flux cleaned = 0.047022 Jy
! Component: 200  -  total flux cleaned = 0.0542822 Jy
! Total flux subtracted in 200 components = 0.0542822 Jy
! Clean residual min=-0.004929 max=0.004925 Jy/beam
! Clean residual mean=-0.000015 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 1.10455 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 57 components and 1.10455 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.237 mas, bmaj=4.732 mas, bpa=3.033 degrees
! Estimated noise=0.585687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00657326 Jy
! Component: 100  -  total flux cleaned = 0.0108329 Jy
! Component: 150  -  total flux cleaned = 0.0137992 Jy
! Component: 200  -  total flux cleaned = 0.0163944 Jy
! Total flux subtracted in 200 components = 0.0163944 Jy
! Clean residual min=-0.003613 max=0.004033 Jy/beam
! Clean residual mean=-0.000015 rms=0.001065 Jy/beam
! Combined flux in latest and established models = 1.12094 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199158 Jy
! Component: 100  -  total flux cleaned = 0.00326376 Jy
! Component: 150  -  total flux cleaned = 0.00441558 Jy
! Component: 200  -  total flux cleaned = 0.00554036 Jy
! Total flux subtracted in 200 components = 0.00554036 Jy
! Clean residual min=-0.003494 max=0.003580 Jy/beam
! Clean residual mean=-0.000013 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 1.12648 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 114 components and 1.12648 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.012 mas, bmaj=3.395 mas, bpa=14.93 degrees
! Estimated noise=0.483899 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196184 Jy
! Component: 100  -  total flux cleaned = 0.000810153 Jy
! Component: 150  -  total flux cleaned = 0.00102867 Jy
! Component: 200  -  total flux cleaned = 0.00122218 Jy
! Total flux subtracted in 200 components = 0.00122218 Jy
! Clean residual min=-0.003595 max=0.003072 Jy/beam
! Clean residual mean=-0.000007 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 1.12771 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 138 components and 1.12771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071484Jy  sigma=1.020078
! Fit after  self-cal, rms=0.071460Jy  sigma=1.019608
wmodel /J0858-1950_X_map.mod
! wmodel: Unable to open new model file: /J0858-1950_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0858-1950_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.012 x 3.395 at 14.93 degrees (North through East)
! Clean map  min=-0.0035575  max=1.01 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0858-1950_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.01 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000777091 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.230819 0.230819 0.461638 0.923277 1.84655 3.69311 7.38621 14.7724 29.5449 59.0897
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.009 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1299.72 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0858-1950_X_dfm.log closed on Thu May 19 18:32:35 2016