! Started logfile: /scr/pima/bg219e_uvs/J0858+1405_S_dfm.log on Thu May 19 18:32:20 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219e_uvs/J0858+1405_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0858+1405_S_uva.fits
! AN table 1: 61 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.369308 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0858+1405
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3244 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0858+1405_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 174 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 174 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 174 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 174 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008379Jy  sigma=20.921879
! Fit after  self-cal, rms=0.917479Jy  sigma=19.079560
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.364 mas, bmaj=13.37 mas, bpa=16.61 degrees
! Estimated noise=0.912698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0624898 Jy
! Component: 100  -  total flux cleaned = 0.0785946 Jy
! Total flux subtracted in 100 components = 0.0785946 Jy
! Clean residual min=-0.006350 max=0.007067 Jy/beam
! Clean residual mean=-0.000001 rms=0.001666 Jy/beam
! Combined flux in latest and established models = 0.0785946 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0785946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065697Jy  sigma=1.329422
! Fit after  self-cal, rms=0.064305Jy  sigma=1.298103
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.236 mas, bmaj=15.71 mas, bpa=14.87 degrees
! Estimated noise=0.692142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011588 Jy
! Component: 100  -  total flux cleaned = 0.0174473 Jy
! Component: 150  -  total flux cleaned = 0.0213534 Jy
! Component: 200  -  total flux cleaned = 0.024133 Jy
! Total flux subtracted in 200 components = 0.024133 Jy
! Clean residual min=-0.004760 max=0.004963 Jy/beam
! Clean residual mean=0.000019 rms=0.001522 Jy/beam
! Combined flux in latest and established models = 0.102728 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 61 components and 0.102728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062254Jy  sigma=1.253160
! Fit after  self-cal, rms=0.062096Jy  sigma=1.250679
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.236 x 15.71 at 14.87 degrees (North through East)
! Clean map  min=-0.0049032  max=0.083986 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.96     HN        0.99     KP        1.06     
!   LA        0.94     NL        1.04     OV        1.06     PT        0.87     
!   SC        1.11     
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        0.96     KP        1.02     
!   LA        0.95     NL        1.06     OV        1.08     PT        0.94     
!   SC        0.91     
! 
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.95     HN        0.94     KP        0.97     
!   LA        0.93     NL        1.16     OV        1.12     PT        0.93     
!   SC        1.11     
! 
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.94     HN        1.08     KP        1.05     
!   LA        0.92     NL        0.98     OV        1.14     PT        0.89     
!   SC        1.12     
! 
! 
! Fit before self-cal, rms=0.062096Jy  sigma=1.250679
! Fit after  self-cal, rms=0.061495Jy  sigma=1.236759
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.303 mas, bmaj=15.65 mas, bpa=15.34 degrees
! Estimated noise=0.695904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000545603 Jy
! Component: 100  -  total flux cleaned = 0.000886144 Jy
! Component: 150  -  total flux cleaned = 0.0010582 Jy
! Component: 200  -  total flux cleaned = 0.00117614 Jy
! Total flux subtracted in 200 components = 0.00117614 Jy
! Clean residual min=-0.003610 max=0.003546 Jy/beam
! Clean residual mean=0.000013 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.103904 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.103904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061431Jy  sigma=1.235445
! Fit after  self-cal, rms=0.061593Jy  sigma=1.233949
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061593Jy  sigma=1.233949
! Fit after  self-cal, rms=0.062594Jy  sigma=1.228657
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.319 mas, bmaj=15.72 mas, bpa=15.53 degrees
! Estimated noise=0.700387 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133863 Jy
! Component: 100  -  total flux cleaned = 0.000370435 Jy
! Component: 150  -  total flux cleaned = 0.000370859 Jy
! Component: 200  -  total flux cleaned = 0.000395345 Jy
! Total flux subtracted in 200 components = 0.000395345 Jy
! Clean residual min=-0.003235 max=0.003277 Jy/beam
! Clean residual mean=0.000010 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.104299 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 83 components and 0.104299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062559Jy  sigma=1.227958
! Fit after  self-cal, rms=0.062607Jy  sigma=1.226217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-85.5, -84.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253535 Jy
! Component: 100  -  total flux cleaned = 0.00308609 Jy
! Component: 150  -  total flux cleaned = 0.00329505 Jy
! Component: 200  -  total flux cleaned = 0.00333509 Jy
! Total flux subtracted in 200 components = 0.00333509 Jy
! Clean residual min=-0.002648 max=0.002499 Jy/beam
! Clean residual mean=0.000008 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.107634 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 115 components and 0.107634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062432Jy  sigma=1.223243
! Fit after  self-cal, rms=0.062410Jy  sigma=1.222530
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062410Jy  sigma=1.222530
! Fit after  self-cal, rms=0.062391Jy  sigma=1.222853
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.315 mas, bmaj=15.74 mas, bpa=15.58 degrees
! Estimated noise=0.700248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121039 Jy
! Component: 100  -  total flux cleaned = 0.00145978 Jy
! Component: 150  -  total flux cleaned = 0.00162403 Jy
! Component: 200  -  total flux cleaned = 0.001593 Jy
! Total flux subtracted in 200 components = 0.001593 Jy
! Clean residual min=-0.002483 max=0.002458 Jy/beam
! Clean residual mean=0.000006 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.109227 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 134 components and 0.109227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062326Jy  sigma=1.221822
! Fit after  self-cal, rms=0.062322Jy  sigma=1.221568
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362286 Jy
! Component: 100  -  total flux cleaned = 0.000361748 Jy
! Component: 150  -  total flux cleaned = 0.000362063 Jy
! Component: 200  -  total flux cleaned = 0.000361597 Jy
! Total flux subtracted in 200 components = 0.000361597 Jy
! Clean residual min=-0.002379 max=0.002501 Jy/beam
! Clean residual mean=0.000005 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.109589 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 145 components and 0.109589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062292Jy  sigma=1.221115
! Fit after  self-cal, rms=0.062282Jy  sigma=1.221033
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062282Jy  sigma=1.221033
! Fit after  self-cal, rms=0.062287Jy  sigma=1.220966
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.477 mas, bmaj=20.85 mas, bpa=12.3 degrees
! Estimated noise=0.798377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00056267 Jy
! Component: 100  -  total flux cleaned = 0.000435081 Jy
! Component: 150  -  total flux cleaned = 0.000368688 Jy
! Component: 200  -  total flux cleaned = 0.000328062 Jy
! Total flux subtracted in 200 components = 0.000328062 Jy
! Clean residual min=-0.002059 max=0.001720 Jy/beam
! Clean residual mean=0.000008 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.109917 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 170 components and 0.109917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062270Jy  sigma=1.220653
! Fit after  self-cal, rms=0.062247Jy  sigma=1.220544
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000249763 Jy
! Component: 100  -  total flux cleaned = 0.000187168 Jy
! Component: 150  -  total flux cleaned = 7.92768e-05 Jy
! Component: 200  -  total flux cleaned = 1.57314e-05 Jy
! Total flux subtracted in 200 components = 1.57314e-05 Jy
! Clean residual min=-0.002003 max=0.001683 Jy/beam
! Clean residual mean=0.000008 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.109933 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 190 components and 0.109933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062238Jy  sigma=1.220370
! Fit after  self-cal, rms=0.062224Jy  sigma=1.220296
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.315 mas, bmaj=15.78 mas, bpa=15.61 degrees
! Estimated noise=0.700825 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.315 x 15.78 at 15.61 degrees (North through East)
! Clean map  min=-0.002586  max=0.082182 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.43 mas, bmaj=13.46 mas, bpa=16.72 degrees
! Estimated noise=0.960599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.063525 Jy
! Component: 100  -  total flux cleaned = 0.0810491 Jy
! Component: 150  -  total flux cleaned = 0.0898065 Jy
! Component: 200  -  total flux cleaned = 0.0955541 Jy
! Total flux subtracted in 200 components = 0.0955541 Jy
! Clean residual min=-0.005158 max=0.005676 Jy/beam
! Clean residual mean=0.000001 rms=0.001279 Jy/beam
! Combined flux in latest and established models = 0.095554 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.095554 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.315 mas, bmaj=15.78 mas, bpa=15.61 degrees
! Estimated noise=0.700825 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00549237 Jy
! Component: 100  -  total flux cleaned = 0.00835289 Jy
! Component: 150  -  total flux cleaned = 0.0100109 Jy
! Component: 200  -  total flux cleaned = 0.0111947 Jy
! Total flux subtracted in 200 components = 0.0111947 Jy
! Clean residual min=-0.002693 max=0.002377 Jy/beam
! Clean residual mean=0.000008 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.106749 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 59 components and 0.106749 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.477 mas, bmaj=20.85 mas, bpa=12.3 degrees
! Estimated noise=0.798377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164076 Jy
! Component: 100  -  total flux cleaned = 0.00183949 Jy
! Component: 150  -  total flux cleaned = 0.00199791 Jy
! Component: 200  -  total flux cleaned = 0.00209614 Jy
! Total flux subtracted in 200 components = 0.00209614 Jy
! Clean residual min=-0.001988 max=0.001672 Jy/beam
! Clean residual mean=0.000009 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.108845 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.41742e-05 Jy
! Component: 100  -  total flux cleaned = 0.000184762 Jy
! Component: 150  -  total flux cleaned = 0.000253088 Jy
! Component: 200  -  total flux cleaned = 0.000315716 Jy
! Total flux subtracted in 200 components = 0.000315716 Jy
! Clean residual min=-0.001984 max=0.001623 Jy/beam
! Clean residual mean=0.000009 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.109161 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 106 components and 0.109161 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.315 mas, bmaj=15.78 mas, bpa=15.61 degrees
! Estimated noise=0.700825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.69604e-05 Jy
! Component: 100  -  total flux cleaned = 0.000143686 Jy
! Component: 150  -  total flux cleaned = 0.000171962 Jy
! Component: 200  -  total flux cleaned = 0.000171634 Jy
! Total flux subtracted in 200 components = 0.000171634 Jy
! Clean residual min=-0.002261 max=0.002312 Jy/beam
! Clean residual mean=0.000005 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.109332 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 136 components and 0.109332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062250Jy  sigma=1.220891
! Fit after  self-cal, rms=0.062215Jy  sigma=1.220424
wmodel /J0858+1405_S_map.mod
! wmodel: Unable to open new model file: /J0858+1405_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0858+1405_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.315 x 15.78 at 15.61 degrees (North through East)
! Clean map  min=-0.0026217  max=0.082035 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0858+1405_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0820352 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00058388 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.13523 2.13523 4.27046 8.54091 17.0818 34.1637 68.3273
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.082 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  140.5 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0858+1405_S_dfm.log closed on Thu May 19 18:32:22 2016