! Started logfile: /scr/pima/bg219e_uvs/J0857+1307_S_uvs.log on Thu Apr  7 06:40:44 2016
obs /scr/pima/bg219e_uvs/J0857+1307_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0857+1307_S_uva.fits
! AN table 1: 31 integrations on 36 of 36 possible baselines.
! AN table 2: 31 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.444892 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0857+1307
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 3972 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0857+1307_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 121 telescope corrections were flagged in sub-array 1.
!  A total of 71 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 121 telescope corrections were flagged in sub-array 1.
!  A total of 71 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 121 telescope corrections were flagged in sub-array 1.
!  A total of 71 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 121 telescope corrections were flagged in sub-array 1.
!  A total of 71 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.012101Jy  sigma=21.314124
! Fit after  self-cal, rms=0.900097Jy  sigma=18.968945
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.251 mas, bmaj=8.958 mas, bpa=0.5964 degrees
! Estimated noise=0.825296 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.076593 Jy
! Component: 100  -  total flux cleaned = 0.0987514 Jy
! Total flux subtracted in 100 components = 0.0987514 Jy
! Clean residual min=-0.008973 max=0.014754 Jy/beam
! Clean residual mean=0.000008 rms=0.002488 Jy/beam
! Combined flux in latest and established models = 0.0987515 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0987515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071802Jy  sigma=1.452619
! Fit after  self-cal, rms=0.069944Jy  sigma=1.423441
! Inverting map 
! Added new window around map position (-6.5, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149838 Jy
! Component: 100  -  total flux cleaned = 0.0224383 Jy
! Total flux subtracted in 100 components = 0.0224383 Jy
! Clean residual min=-0.006076 max=0.005906 Jy/beam
! Clean residual mean=-0.000009 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 0.12119 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.12119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066663Jy  sigma=1.348158
! Fit after  self-cal, rms=0.066246Jy  sigma=1.340738
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.154 mas, bmaj=10.17 mas, bpa=-7.061 degrees
! Estimated noise=0.630137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00823414 Jy
! Component: 100  -  total flux cleaned = 0.0129209 Jy
! Component: 150  -  total flux cleaned = 0.0160866 Jy
! Component: 200  -  total flux cleaned = 0.018328 Jy
! Total flux subtracted in 200 components = 0.018328 Jy
! Clean residual min=-0.003498 max=0.004040 Jy/beam
! Clean residual mean=-0.000008 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 0.139518 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 56 components and 0.139518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065147Jy  sigma=1.316435
! Fit after  self-cal, rms=0.064991Jy  sigma=1.313217
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.154 x 10.17 at -7.061 degrees (North through East)
! Clean map  min=-0.003402  max=0.092777 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.10     HN        0.92     KP        0.86     
!   LA        1.01     NL        0.90     OV        1.15     PT        0.92     
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        1.07     HN        0.99     KP        0.99     
!   LA        0.93     MK        1.00*    NL        1.02     OV        1.06     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        0.92     
!   LA        1.03     NL        1.12     OV        1.08     PT        0.94     
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.05     HN        1.06     KP        1.00     
!   LA        0.97     MK        1.00*    NL        1.07     OV        0.98     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.01     KP        0.99     
!   LA        0.97     NL        0.91     OV        1.03     PT        0.95     
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.02     
!   LA        1.10     MK        1.00*    NL        0.94     OV        1.00     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.09     KP        0.93     
!   LA        0.95     NL        0.87     OV        1.04     PT        0.94     
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.03     HN        0.94     KP        1.02     
!   LA        0.96     MK        1.00*    NL        0.95     OV        1.01     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.064991Jy  sigma=1.313217
! Fit after  self-cal, rms=0.064703Jy  sigma=1.302796
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.176 mas, bmaj=10.22 mas, bpa=-7.079 degrees
! Estimated noise=0.624283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000824813 Jy
! Component: 100  -  total flux cleaned = 0.000645714 Jy
! Component: 150  -  total flux cleaned = 0.000555836 Jy
! Component: 200  -  total flux cleaned = 0.000551129 Jy
! Total flux subtracted in 200 components = 0.000551129 Jy
! Clean residual min=-0.003246 max=0.002971 Jy/beam
! Clean residual mean=-0.000009 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.140069 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.140069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064580Jy  sigma=1.301007
! Fit after  self-cal, rms=0.064624Jy  sigma=1.299711
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064624Jy  sigma=1.299711
! Fit after  self-cal, rms=0.064567Jy  sigma=1.299460
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.185 mas, bmaj=10.22 mas, bpa=-7.183 degrees
! Estimated noise=0.624597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000861459 Jy
! Component: 100  -  total flux cleaned = 0.000671449 Jy
! Component: 150  -  total flux cleaned = 0.000568752 Jy
! Component: 200  -  total flux cleaned = 0.000438581 Jy
! Total flux subtracted in 200 components = 0.000438581 Jy
! Clean residual min=-0.003074 max=0.002910 Jy/beam
! Clean residual mean=-0.000009 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.140507 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.140507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064481Jy  sigma=1.298218
! Fit after  self-cal, rms=0.064461Jy  sigma=1.297541
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189954 Jy
! Component: 100  -  total flux cleaned = 0.000154264 Jy
! Component: 150  -  total flux cleaned = 7.87095e-05 Jy
! Component: 200  -  total flux cleaned = -5.3822e-07 Jy
! Total flux subtracted in 200 components = -5.3822e-07 Jy
! Clean residual min=-0.002993 max=0.002800 Jy/beam
! Clean residual mean=-0.000009 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.140507 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 0.140507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064410Jy  sigma=1.296860
! Fit after  self-cal, rms=0.064219Jy  sigma=1.293930
! Inverting map 
! Added new window around map position (-123, 77).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151452 Jy
! Component: 100  -  total flux cleaned = 0.00131876 Jy
! Component: 150  -  total flux cleaned = 0.0011798 Jy
! Component: 200  -  total flux cleaned = 0.000954668 Jy
! Total flux subtracted in 200 components = 0.000954668 Jy
! Clean residual min=-0.002942 max=0.002855 Jy/beam
! Clean residual mean=-0.000009 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.141462 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 106 components and 0.141462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064065Jy  sigma=1.291196
! Fit after  self-cal, rms=0.063981Jy  sigma=1.289821
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063981Jy  sigma=1.289821
! Fit after  self-cal, rms=0.063937Jy  sigma=1.289134
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.179 mas, bmaj=10.23 mas, bpa=-6.973 degrees
! Estimated noise=0.624291 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168472 Jy
! Component: 100  -  total flux cleaned = 0.00159325 Jy
! Component: 150  -  total flux cleaned = 0.00151584 Jy
! Component: 200  -  total flux cleaned = 0.0014198 Jy
! Total flux subtracted in 200 components = 0.0014198 Jy
! Clean residual min=-0.002557 max=0.002917 Jy/beam
! Clean residual mean=-0.000008 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.142881 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 124 components and 0.142881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063854Jy  sigma=1.287735
! Fit after  self-cal, rms=0.063842Jy  sigma=1.287343
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (35.5, 111.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216292 Jy
! Component: 100  -  total flux cleaned = 0.00294372 Jy
! Component: 150  -  total flux cleaned = 0.00365454 Jy
! Component: 200  -  total flux cleaned = 0.0042352 Jy
! Total flux subtracted in 200 components = 0.0042352 Jy
! Clean residual min=-0.002212 max=0.001958 Jy/beam
! Clean residual mean=-0.000004 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.147116 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 153 components and 0.147116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063709Jy  sigma=1.284824
! Fit after  self-cal, rms=0.063699Jy  sigma=1.284483
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063699Jy  sigma=1.284483
! Fit after  self-cal, rms=0.063721Jy  sigma=1.284178
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.43 mas, bmaj=11.67 mas, bpa=-9.548 degrees
! Estimated noise=0.675163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159267 Jy
! Component: 100  -  total flux cleaned = 0.00247672 Jy
! Component: 150  -  total flux cleaned = 0.00259246 Jy
! Component: 200  -  total flux cleaned = 0.00255817 Jy
! Total flux subtracted in 200 components = 0.00255817 Jy
! Clean residual min=-0.002365 max=0.001848 Jy/beam
! Clean residual mean=-0.000005 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 0.149675 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 178 components and 0.149675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063661Jy  sigma=1.283144
! Fit after  self-cal, rms=0.063657Jy  sigma=1.283016
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000448352 Jy
! Component: 100  -  total flux cleaned = 0.000685925 Jy
! Component: 150  -  total flux cleaned = 0.000685419 Jy
! Component: 200  -  total flux cleaned = 0.000684918 Jy
! Total flux subtracted in 200 components = 0.000684918 Jy
! Clean residual min=-0.002277 max=0.001741 Jy/beam
! Clean residual mean=-0.000005 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.15036 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 191 components and 0.15036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063626Jy  sigma=1.282460
! Fit after  self-cal, rms=0.063626Jy  sigma=1.282398
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.166 mas, bmaj=10.23 mas, bpa=-6.827 degrees
! Estimated noise=0.625021 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.166 x 10.23 at -6.827 degrees (North through East)
! Clean map  min=-0.0019524  max=0.088134 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.231 mas, bmaj=8.984 mas, bpa=1.11 degrees
! Estimated noise=0.81873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0786945 Jy
! Component: 100  -  total flux cleaned = 0.106025 Jy
! Component: 150  -  total flux cleaned = 0.117749 Jy
! Component: 200  -  total flux cleaned = 0.124495 Jy
! Total flux subtracted in 200 components = 0.124495 Jy
! Clean residual min=-0.004878 max=0.004183 Jy/beam
! Clean residual mean=-0.000005 rms=0.001231 Jy/beam
! Combined flux in latest and established models = 0.124495 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.124495 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.166 mas, bmaj=10.23 mas, bpa=-6.827 degrees
! Estimated noise=0.625021 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645432 Jy
! Component: 100  -  total flux cleaned = 0.0107231 Jy
! Component: 150  -  total flux cleaned = 0.013971 Jy
! Component: 200  -  total flux cleaned = 0.0163008 Jy
! Total flux subtracted in 200 components = 0.0163008 Jy
! Clean residual min=-0.003020 max=0.002493 Jy/beam
! Clean residual mean=0.000000 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.140796 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 82 components and 0.140796 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.43 mas, bmaj=11.67 mas, bpa=-9.548 degrees
! Estimated noise=0.675163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235607 Jy
! Component: 100  -  total flux cleaned = 0.0036839 Jy
! Component: 150  -  total flux cleaned = 0.0047977 Jy
! Component: 200  -  total flux cleaned = 0.00548619 Jy
! Total flux subtracted in 200 components = 0.00548619 Jy
! Clean residual min=-0.002537 max=0.002037 Jy/beam
! Clean residual mean=-0.000002 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.146282 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000511156 Jy
! Component: 100  -  total flux cleaned = 0.00102158 Jy
! Component: 150  -  total flux cleaned = 0.00136113 Jy
! Component: 200  -  total flux cleaned = 0.00151805 Jy
! Total flux subtracted in 200 components = 0.00151805 Jy
! Clean residual min=-0.002268 max=0.001849 Jy/beam
! Clean residual mean=-0.000003 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.1478 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 151 components and 0.1478 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.166 mas, bmaj=10.23 mas, bpa=-6.827 degrees
! Estimated noise=0.625021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185523 Jy
! Component: 100  -  total flux cleaned = 0.000316874 Jy
! Component: 150  -  total flux cleaned = 0.000513219 Jy
! Component: 200  -  total flux cleaned = 0.000727733 Jy
! Total flux subtracted in 200 components = 0.000727733 Jy
! Clean residual min=-0.001957 max=0.001724 Jy/beam
! Clean residual mean=-0.000002 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.148528 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 176 components and 0.148528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063631Jy  sigma=1.282641
! Fit after  self-cal, rms=0.063597Jy  sigma=1.282067
wmodel /scr/pima/bg219e_uvs/J0857+1307_S_map.mod
! Writing 176 model components to file: /scr/pima/bg219e_uvs/J0857+1307_S_map.mod
wobs /scr/pima/bg219e_uvs/J0857+1307_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0857+1307_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J0857+1307_S_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219e_uvs/J0857+1307_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000282188 Jy
! Component: 100  -  total flux cleaned = -0.000280023 Jy
! Component: 150  -  total flux cleaned = -0.000499355 Jy
! Component: 200  -  total flux cleaned = -0.000602836 Jy
! Component: 250  -  total flux cleaned = -0.000702153 Jy
! Component: 300  -  total flux cleaned = -0.0007968 Jy
! Component: 350  -  total flux cleaned = -0.000842122 Jy
! Component: 400  -  total flux cleaned = -0.000799731 Jy
! Component: 450  -  total flux cleaned = -0.000841477 Jy
! Component: 500  -  total flux cleaned = -0.000741745 Jy
! Component: 550  -  total flux cleaned = -0.000626082 Jy
! Component: 600  -  total flux cleaned = -0.000477779 Jy
! Component: 650  -  total flux cleaned = -0.000334963 Jy
! Component: 700  -  total flux cleaned = -0.000283434 Jy
! Component: 750  -  total flux cleaned = -0.000181579 Jy
! Component: 800  -  total flux cleaned = -9.96432e-05 Jy
! Component: 850  -  total flux cleaned = -2.85047e-06 Jy
! Component: 900  -  total flux cleaned = 7.67144e-05 Jy
! Component: 950  -  total flux cleaned = 0.000139077 Jy
! Component: 1000  -  total flux cleaned = 0.00010876 Jy
! Component: 1050  -  total flux cleaned = 0.00013903 Jy
! Component: 1100  -  total flux cleaned = 0.0001244 Jy
! Component: 1150  -  total flux cleaned = 9.54659e-05 Jy
! Component: 1200  -  total flux cleaned = 5.24535e-05 Jy
! Component: 1250  -  total flux cleaned = -3.1978e-05 Jy
! Component: 1300  -  total flux cleaned = -8.73341e-05 Jy
! Component: 1350  -  total flux cleaned = -0.000128368 Jy
! Component: 1400  -  total flux cleaned = -0.00014178 Jy
! Component: 1450  -  total flux cleaned = -0.000155182 Jy
! Component: 1500  -  total flux cleaned = -0.00018161 Jy
! Component: 1550  -  total flux cleaned = -0.000220507 Jy
! Component: 1600  -  total flux cleaned = -0.000220522 Jy
! Component: 1650  -  total flux cleaned = -0.00024615 Jy
! Component: 1700  -  total flux cleaned = -0.000258815 Jy
! Component: 1750  -  total flux cleaned = -0.000308559 Jy
! Component: 1800  -  total flux cleaned = -0.000283953 Jy
! Component: 1850  -  total flux cleaned = -0.0002717 Jy
! Component: 1900  -  total flux cleaned = -0.000271477 Jy
! Component: 1950  -  total flux cleaned = -0.000211339 Jy
! Component: 2000  -  total flux cleaned = -0.000199525 Jy
! Component: 2050  -  total flux cleaned = -0.000175913 Jy
! Component: 2100  -  total flux cleaned = -0.000140817 Jy
! Component: 2150  -  total flux cleaned = -0.000140819 Jy
! Component: 2200  -  total flux cleaned = -9.46097e-05 Jy
! Component: 2250  -  total flux cleaned = -7.1793e-05 Jy
! Component: 2300  -  total flux cleaned = -8.31759e-05 Jy
! Component: 2350  -  total flux cleaned = -2.67909e-05 Jy
! Component: 2400  -  total flux cleaned = 6.75786e-06 Jy
! Component: 2450  -  total flux cleaned = 2.90093e-05 Jy
! Component: 2500  -  total flux cleaned = 6.21479e-05 Jy
! Component: 2550  -  total flux cleaned = 9.50299e-05 Jy
! Component: 2600  -  total flux cleaned = 0.000105917 Jy
! Component: 2650  -  total flux cleaned = 0.000138525 Jy
! Component: 2700  -  total flux cleaned = 0.000192508 Jy
! Component: 2750  -  total flux cleaned = 0.000203265 Jy
! Component: 2800  -  total flux cleaned = 0.000235477 Jy
! Component: 2850  -  total flux cleaned = 0.000256731 Jy
! Component: 2900  -  total flux cleaned = 0.000277953 Jy
! Component: 2950  -  total flux cleaned = 0.0003203 Jy
! Component: 3000  -  total flux cleaned = 0.000341351 Jy
! Component: 3050  -  total flux cleaned = 0.000341396 Jy
! Component: 3100  -  total flux cleaned = 0.000393724 Jy
! Component: 3150  -  total flux cleaned = 0.000435405 Jy
! Component: 3200  -  total flux cleaned = 0.00044575 Jy
! Component: 3250  -  total flux cleaned = 0.000466425 Jy
! Component: 3300  -  total flux cleaned = 0.00049736 Jy
! Component: 3350  -  total flux cleaned = 0.000538565 Jy
! Component: 3400  -  total flux cleaned = 0.000559027 Jy
! Component: 3450  -  total flux cleaned = 0.00059991 Jy
! Component: 3500  -  total flux cleaned = 0.00061017 Jy
! Component: 3550  -  total flux cleaned = 0.000620302 Jy
! Component: 3600  -  total flux cleaned = 0.000681177 Jy
! Component: 3650  -  total flux cleaned = 0.000701427 Jy
! Component: 3700  -  total flux cleaned = 0.000731667 Jy
! Component: 3750  -  total flux cleaned = 0.000751788 Jy
! Component: 3800  -  total flux cleaned = 0.000761847 Jy
! Component: 3850  -  total flux cleaned = 0.000801893 Jy
! Component: 3900  -  total flux cleaned = 0.000821877 Jy
! Component: 3950  -  total flux cleaned = 0.000831872 Jy
! Component: 4000  -  total flux cleaned = 0.000851748 Jy
! Component: 4050  -  total flux cleaned = 0.000881478 Jy
! Total flux subtracted in 4096 components = 0.0008914 Jy
! Clean residual min=-0.000629 max=0.000661 Jy/beam
! Clean residual mean=-0.000002 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.149419 Jy
keep
! Adding 263 model components to the UV plane model.
! The established model now contains 439 components and 0.149419 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0857+1307_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.166 x 10.23 at -6.827 degrees (North through East)
! Clean map  min=-0.0016709  max=0.08657 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0857+1307_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0865695 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000178126 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.617282 0.617282 1.23456 2.46913 4.93825 9.87651 19.753 39.506 79.0121
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.086 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  486.001 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0857+1307_S_uvs.log closed on Thu Apr  7 06:40:48 2016