! Started logfile: /scr/pima/bg219e_uvs/J0854-2540_S_uvs.log on Thu Apr  7 06:40:40 2016
obs /scr/pima/bg219e_uvs/J0854-2540_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0854-2540_S_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.688657 visibilities/baseline/integration-bin.
! Found source: J0854-2540
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4760 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219e_uvs/J0854-2540_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.049755Jy  sigma=17.226099
! Fit after  self-cal, rms=0.750587Jy  sigma=12.023886
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.57 mas, bmaj=17.75 mas, bpa=-3.004 degrees
! Estimated noise=1.11406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187753 Jy
! Component: 100  -  total flux cleaned = 0.263786 Jy
! Total flux subtracted in 100 components = 0.263786 Jy
! Clean residual min=-0.015610 max=0.035345 Jy/beam
! Clean residual mean=0.000061 rms=0.005650 Jy/beam
! Combined flux in latest and established models = 0.263786 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.263786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109790Jy  sigma=1.774767
! Fit after  self-cal, rms=0.109183Jy  sigma=1.769053
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.040716 Jy
! Component: 100  -  total flux cleaned = 0.0642386 Jy
! Total flux subtracted in 100 components = 0.0642386 Jy
! Clean residual min=-0.008333 max=0.012332 Jy/beam
! Clean residual mean=0.000030 rms=0.002775 Jy/beam
! Combined flux in latest and established models = 0.328025 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 62 components and 0.328025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088180Jy  sigma=1.380052
! Fit after  self-cal, rms=0.088014Jy  sigma=1.378608
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.632 mas, bmaj=19.94 mas, bpa=-1.658 degrees
! Estimated noise=0.646453 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210014 Jy
! Component: 100  -  total flux cleaned = 0.0325868 Jy
! Component: 150  -  total flux cleaned = 0.0395186 Jy
! Component: 200  -  total flux cleaned = 0.0440073 Jy
! Total flux subtracted in 200 components = 0.0440073 Jy
! Clean residual min=-0.004556 max=0.007508 Jy/beam
! Clean residual mean=0.000031 rms=0.001397 Jy/beam
! Combined flux in latest and established models = 0.372032 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 124 components and 0.372032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083120Jy  sigma=1.286694
! Fit after  self-cal, rms=0.083082Jy  sigma=1.286397
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.632 x 19.94 at -1.658 degrees (North through East)
! Clean map  min=-0.0045336  max=0.25674 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        0.97     
!   LA        1.00     NL        1.08     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        0.97     
!   LA        1.00     NL        1.03     OV        1.00     PT        0.99     
!   SC        1.15     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.06     KP        0.99     
!   LA        0.98     NL        1.02     OV        0.99     PT        1.00     
!   SC        0.87     
! 
! 
! Fit before self-cal, rms=0.083082Jy  sigma=1.286397
! Fit after  self-cal, rms=0.083836Jy  sigma=1.281309
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.689 mas, bmaj=20.04 mas, bpa=-1.617 degrees
! Estimated noise=0.650017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126709 Jy
! Component: 100  -  total flux cleaned = 0.00132698 Jy
! Component: 150  -  total flux cleaned = 0.00147583 Jy
! Component: 200  -  total flux cleaned = 0.00165617 Jy
! Total flux subtracted in 200 components = 0.00165617 Jy
! Clean residual min=-0.003969 max=0.005260 Jy/beam
! Clean residual mean=0.000027 rms=0.001145 Jy/beam
! Combined flux in latest and established models = 0.373688 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 137 components and 0.373688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083761Jy  sigma=1.280125
! Fit after  self-cal, rms=0.083781Jy  sigma=1.280067
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083781Jy  sigma=1.280067
! Fit after  self-cal, rms=0.084297Jy  sigma=1.276000
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.704 mas, bmaj=20.04 mas, bpa=-1.569 degrees
! Estimated noise=0.652903 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111935 Jy
! Component: 100  -  total flux cleaned = 0.00118171 Jy
! Component: 150  -  total flux cleaned = 0.00128456 Jy
! Component: 200  -  total flux cleaned = 0.00137048 Jy
! Total flux subtracted in 200 components = 0.00137048 Jy
! Clean residual min=-0.003876 max=0.003723 Jy/beam
! Clean residual mean=0.000015 rms=0.001000 Jy/beam
! Combined flux in latest and established models = 0.375059 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 155 components and 0.375058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084216Jy  sigma=1.274538
! Fit after  self-cal, rms=0.084241Jy  sigma=1.274454
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.91057e-05 Jy
! Component: 100  -  total flux cleaned = 0.000139071 Jy
! Component: 150  -  total flux cleaned = 0.000237952 Jy
! Component: 200  -  total flux cleaned = 0.000330873 Jy
! Total flux subtracted in 200 components = 0.000330873 Jy
! Clean residual min=-0.003786 max=0.003655 Jy/beam
! Clean residual mean=0.000015 rms=0.000988 Jy/beam
! Combined flux in latest and established models = 0.375389 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 160 components and 0.375389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084214Jy  sigma=1.274061
! Fit after  self-cal, rms=0.084217Jy  sigma=1.274057
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084217Jy  sigma=1.274057
! Fit after  self-cal, rms=0.084373Jy  sigma=1.272211
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.709 mas, bmaj=19.92 mas, bpa=-1.454 degrees
! Estimated noise=0.652995 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000649006 Jy
! Component: 100  -  total flux cleaned = 0.000782992 Jy
! Component: 150  -  total flux cleaned = 0.000941493 Jy
! Component: 200  -  total flux cleaned = 0.00105093 Jy
! Total flux subtracted in 200 components = 0.00105093 Jy
! Clean residual min=-0.003770 max=0.003756 Jy/beam
! Clean residual mean=0.000016 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.37644 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 168 components and 0.37644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084332Jy  sigma=1.271532
! Fit after  self-cal, rms=0.084346Jy  sigma=1.271514
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103212 Jy
! Component: 100  -  total flux cleaned = 0.000199975 Jy
! Component: 150  -  total flux cleaned = 0.000290266 Jy
! Component: 200  -  total flux cleaned = 0.000375427 Jy
! Total flux subtracted in 200 components = 0.000375427 Jy
! Clean residual min=-0.003683 max=0.003699 Jy/beam
! Clean residual mean=0.000017 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.376816 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 173 components and 0.376816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084324Jy  sigma=1.271226
! Fit after  self-cal, rms=0.084325Jy  sigma=1.271225
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084325Jy  sigma=1.271225
! Fit after  self-cal, rms=0.084359Jy  sigma=1.270978
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.986 mas, bmaj=23.23 mas, bpa=-0.8728 degrees
! Estimated noise=0.674416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100047 Jy
! Component: 100  -  total flux cleaned = 0.00119971 Jy
! Component: 150  -  total flux cleaned = 0.00140192 Jy
! Component: 200  -  total flux cleaned = 0.00149043 Jy
! Total flux subtracted in 200 components = 0.00149043 Jy
! Clean residual min=-0.003868 max=0.003550 Jy/beam
! Clean residual mean=0.000018 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.378306 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 183 components and 0.378306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084337Jy  sigma=1.270778
! Fit after  self-cal, rms=0.084335Jy  sigma=1.270765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103865 Jy
! Component: 100  -  total flux cleaned = 0.000175109 Jy
! Component: 150  -  total flux cleaned = 0.000219482 Jy
! Component: 200  -  total flux cleaned = 0.000280526 Jy
! Total flux subtracted in 200 components = 0.000280526 Jy
! Clean residual min=-0.003795 max=0.003537 Jy/beam
! Clean residual mean=0.000018 rms=0.000940 Jy/beam
! Combined flux in latest and established models = 0.378587 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 191 components and 0.378587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084325Jy  sigma=1.270645
! Fit after  self-cal, rms=0.084327Jy  sigma=1.270639
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.714 mas, bmaj=19.85 mas, bpa=-1.37 degrees
! Estimated noise=0.652883 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.714 x 19.85 at -1.37 degrees (North through East)
! Clean map  min=-0.0035821  max=0.25603 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.621 mas, bmaj=17.61 mas, bpa=-2.79 degrees
! Estimated noise=1.13263 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.190219 Jy
! Component: 100  -  total flux cleaned = 0.266519 Jy
! Component: 150  -  total flux cleaned = 0.306235 Jy
! Component: 200  -  total flux cleaned = 0.328587 Jy
! Total flux subtracted in 200 components = 0.328587 Jy
! Clean residual min=-0.007814 max=0.011186 Jy/beam
! Clean residual mean=0.000017 rms=0.002456 Jy/beam
! Combined flux in latest and established models = 0.328587 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.328587 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.714 mas, bmaj=19.85 mas, bpa=-1.37 degrees
! Estimated noise=0.652883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188876 Jy
! Component: 100  -  total flux cleaned = 0.0291727 Jy
! Component: 150  -  total flux cleaned = 0.0356529 Jy
! Component: 200  -  total flux cleaned = 0.0400008 Jy
! Total flux subtracted in 200 components = 0.0400008 Jy
! Clean residual min=-0.004378 max=0.005301 Jy/beam
! Clean residual mean=0.000012 rms=0.001119 Jy/beam
! Combined flux in latest and established models = 0.368588 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 112 components and 0.368588 Jy
! Inverting map 
! Added new window around map position (-9, 3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438266 Jy
! Component: 100  -  total flux cleaned = 0.00562345 Jy
! Component: 150  -  total flux cleaned = 0.00637064 Jy
! Component: 200  -  total flux cleaned = 0.00686651 Jy
! Total flux subtracted in 200 components = 0.00686651 Jy
! Clean residual min=-0.003500 max=0.003332 Jy/beam
! Clean residual mean=0.000014 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.375454 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 130 components and 0.375454 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.986 mas, bmaj=23.23 mas, bpa=-0.8728 degrees
! Estimated noise=0.674416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000183676 Jy
! Component: 100  -  total flux cleaned = 0.000358304 Jy
! Component: 150  -  total flux cleaned = 0.000563531 Jy
! Component: 200  -  total flux cleaned = 0.000702484 Jy
! Total flux subtracted in 200 components = 0.000702484 Jy
! Clean residual min=-0.003390 max=0.003063 Jy/beam
! Clean residual mean=0.000017 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.376157 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128626 Jy
! Component: 100  -  total flux cleaned = 0.000129733 Jy
! Component: 150  -  total flux cleaned = 0.000205769 Jy
! Component: 200  -  total flux cleaned = 0.000240843 Jy
! Total flux subtracted in 200 components = 0.000240843 Jy
! Clean residual min=-0.003188 max=0.002991 Jy/beam
! Clean residual mean=0.000017 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.376398 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 178 components and 0.376398 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.714 mas, bmaj=19.85 mas, bpa=-1.37 degrees
! Estimated noise=0.652883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000459562 Jy
! Component: 100  -  total flux cleaned = -0.00078502 Jy
! Component: 150  -  total flux cleaned = -0.000822873 Jy
! Component: 200  -  total flux cleaned = -0.00082347 Jy
! Total flux subtracted in 200 components = -0.00082347 Jy
! Clean residual min=-0.002788 max=0.002997 Jy/beam
! Clean residual mean=0.000014 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.375574 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 201 components and 0.375574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084215Jy  sigma=1.268583
! Fit after  self-cal, rms=0.084196Jy  sigma=1.268309
wmodel /scr/pima/bg219e_uvs/J0854-2540_S_map.mod
! Writing 201 model components to file: /scr/pima/bg219e_uvs/J0854-2540_S_map.mod
wobs /scr/pima/bg219e_uvs/J0854-2540_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219e_uvs/J0854-2540_S_uvs.fits
wwins /scr/pima/bg219e_uvs/J0854-2540_S_map.win
! wwins: Wrote 2 windows to /scr/pima/bg219e_uvs/J0854-2540_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000613676 Jy
! Component: 100  -  total flux cleaned = 0.000763584 Jy
! Component: 150  -  total flux cleaned = 0.000719139 Jy
! Component: 200  -  total flux cleaned = 0.000718279 Jy
! Component: 250  -  total flux cleaned = 0.000756772 Jy
! Component: 300  -  total flux cleaned = 0.000793052 Jy
! Component: 350  -  total flux cleaned = 0.000828514 Jy
! Component: 400  -  total flux cleaned = 0.000828516 Jy
! Component: 450  -  total flux cleaned = 0.000895494 Jy
! Component: 500  -  total flux cleaned = 0.000992713 Jy
! Component: 550  -  total flux cleaned = 0.000992087 Jy
! Component: 600  -  total flux cleaned = 0.00102302 Jy
! Component: 650  -  total flux cleaned = 0.00102266 Jy
! Component: 700  -  total flux cleaned = 0.000904382 Jy
! Component: 750  -  total flux cleaned = 0.000847732 Jy
! Component: 800  -  total flux cleaned = 0.000876895 Jy
! Component: 850  -  total flux cleaned = 0.000904491 Jy
! Component: 900  -  total flux cleaned = 0.000823585 Jy
! Component: 950  -  total flux cleaned = 0.0007181 Jy
! Component: 1000  -  total flux cleaned = 0.000666517 Jy
! Component: 1050  -  total flux cleaned = 0.000538899 Jy
! Component: 1100  -  total flux cleaned = 0.000363233 Jy
! Component: 1150  -  total flux cleaned = 0.000214795 Jy
! Component: 1200  -  total flux cleaned = -2.74314e-05 Jy
! Component: 1250  -  total flux cleaned = -0.000122686 Jy
! Component: 1300  -  total flux cleaned = -0.000357382 Jy
! Component: 1350  -  total flux cleaned = -0.000541948 Jy
! Component: 1400  -  total flux cleaned = -0.000701308 Jy
! Component: 1450  -  total flux cleaned = -0.00101405 Jy
! Component: 1500  -  total flux cleaned = -0.00108012 Jy
! Component: 1550  -  total flux cleaned = -0.00127573 Jy
! Component: 1600  -  total flux cleaned = -0.00142527 Jy
! Component: 1650  -  total flux cleaned = -0.00157303 Jy
! Component: 1700  -  total flux cleaned = -0.00171929 Jy
! Component: 1750  -  total flux cleaned = -0.00190492 Jy
! Component: 1800  -  total flux cleaned = -0.00202725 Jy
! Component: 1850  -  total flux cleaned = -0.0021685 Jy
! Component: 1900  -  total flux cleaned = -0.00226819 Jy
! Component: 1950  -  total flux cleaned = -0.00242619 Jy
! Component: 2000  -  total flux cleaned = -0.00252389 Jy
! Component: 2050  -  total flux cleaned = -0.0026593 Jy
! Component: 2100  -  total flux cleaned = -0.0027737 Jy
! Component: 2150  -  total flux cleaned = -0.00284941 Jy
! Component: 2200  -  total flux cleaned = -0.0029055 Jy
! Component: 2250  -  total flux cleaned = -0.00303534 Jy
! Component: 2300  -  total flux cleaned = -0.00314543 Jy
! Component: 2350  -  total flux cleaned = -0.00325455 Jy
! Component: 2400  -  total flux cleaned = -0.00332658 Jy
! Component: 2450  -  total flux cleaned = -0.00345186 Jy
! Component: 2500  -  total flux cleaned = -0.0035404 Jy
! Component: 2550  -  total flux cleaned = -0.00361041 Jy
! Component: 2600  -  total flux cleaned = -0.00368005 Jy
! Component: 2650  -  total flux cleaned = -0.00376614 Jy
! Component: 2700  -  total flux cleaned = -0.0038174 Jy
! Component: 2750  -  total flux cleaned = -0.00396945 Jy
! Component: 2800  -  total flux cleaned = -0.00396945 Jy
! Component: 2850  -  total flux cleaned = -0.00403595 Jy
! Component: 2900  -  total flux cleaned = -0.00408549 Jy
! Component: 2950  -  total flux cleaned = -0.00411817 Jy
! Component: 3000  -  total flux cleaned = -0.00423165 Jy
! Component: 3050  -  total flux cleaned = -0.00427987 Jy
! Component: 3100  -  total flux cleaned = -0.00435967 Jy
! Component: 3150  -  total flux cleaned = -0.00440699 Jy
! Component: 3200  -  total flux cleaned = -0.00440711 Jy
! Component: 3250  -  total flux cleaned = -0.0044851 Jy
! Component: 3300  -  total flux cleaned = -0.00453162 Jy
! Component: 3350  -  total flux cleaned = -0.00460834 Jy
! Component: 3400  -  total flux cleaned = -0.00465398 Jy
! Component: 3450  -  total flux cleaned = -0.00463886 Jy
! Component: 3500  -  total flux cleaned = -0.004684 Jy
! Component: 3550  -  total flux cleaned = -0.0047587 Jy
! Component: 3600  -  total flux cleaned = -0.00480311 Jy
! Component: 3650  -  total flux cleaned = -0.00480303 Jy
! Component: 3700  -  total flux cleaned = -0.00484701 Jy
! Component: 3750  -  total flux cleaned = -0.00494879 Jy
! Component: 3800  -  total flux cleaned = -0.00497785 Jy
! Component: 3850  -  total flux cleaned = -0.00509274 Jy
! Component: 3900  -  total flux cleaned = -0.00512128 Jy
! Component: 3950  -  total flux cleaned = -0.00519222 Jy
! Component: 4000  -  total flux cleaned = -0.00529098 Jy
! Component: 4050  -  total flux cleaned = -0.00530495 Jy
! Total flux subtracted in 4096 components = -0.00537486 Jy
! Clean residual min=-0.000724 max=0.000843 Jy/beam
! Clean residual mean=-0.000000 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.370199 Jy
keep
! Adding 367 model components to the UV plane model.
! The established model now contains 568 components and 0.370199 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219e_uvs/J0854-2540_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.714 x 19.85 at -1.37 degrees (North through East)
! Clean map  min=-0.0024478  max=0.25751 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0854-2540_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.257512 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000299424 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.348827 0.348827 0.697654 1.39531 2.79062 5.58123 11.1625 22.3249 44.6499 89.2997
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.257 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  860.024 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0854-2540_S_uvs.log closed on Thu Apr  7 06:40:44 2016