! Started logfile: /scr/pima/bg219e_uvs/J0853-0150_X_dfm.log on Thu May 19 18:31:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219e_uvs/J0853-0150_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219e_uvs/J0853-0150_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.798208 visibilities/baseline/integration-bin.
! Found source: J0853-0150
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26724 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0853-0150_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001903Jy  sigma=22.466988
! Fit after  self-cal, rms=0.950967Jy  sigma=21.320945
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.731 mas, bmaj=1.777 mas, bpa=1.941 degrees
! Estimated noise=0.335796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0373103 Jy
! Component: 100  -  total flux cleaned = 0.0465629 Jy
! Total flux subtracted in 100 components = 0.0465629 Jy
! Clean residual min=-0.002640 max=0.006858 Jy/beam
! Clean residual mean=0.000002 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.0465629 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0465629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066638Jy  sigma=1.399301
! Fit after  self-cal, rms=0.065183Jy  sigma=1.365814
! Inverting map 
! Added new window around map position (1.6, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00729181 Jy
! Component: 100  -  total flux cleaned = 0.0117016 Jy
! Total flux subtracted in 100 components = 0.0117016 Jy
! Clean residual min=-0.002038 max=0.002352 Jy/beam
! Clean residual mean=-0.000000 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0582645 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.0582645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064077Jy  sigma=1.338492
! Fit after  self-cal, rms=0.063980Jy  sigma=1.335869
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380751 Jy
! Component: 100  -  total flux cleaned = 0.0061294 Jy
! Total flux subtracted in 100 components = 0.0061294 Jy
! Clean residual min=-0.001875 max=0.001877 Jy/beam
! Clean residual mean=-0.000001 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.0643939 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.0643939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063679Jy  sigma=1.328344
! Fit after  self-cal, rms=0.063654Jy  sigma=1.327557
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9152 mas, bmaj=2.116 mas, bpa=4.048 degrees
! Estimated noise=0.209053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272009 Jy
! Component: 100  -  total flux cleaned = 0.00417379 Jy
! Component: 150  -  total flux cleaned = 0.00500508 Jy
! Component: 200  -  total flux cleaned = 0.00532332 Jy
! Total flux subtracted in 200 components = 0.00532332 Jy
! Clean residual min=-0.001284 max=0.001168 Jy/beam
! Clean residual mean=0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0697172 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 29 components and 0.0697172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063546Jy  sigma=1.324820
! Fit after  self-cal, rms=0.063532Jy  sigma=1.324460
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9152 x 2.116 at 4.048 degrees (North through East)
! Clean map  min=-0.0012001  max=0.051502 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.04     KP        1.00     
!   LA        0.98     MK        1.06     NL        1.07     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.05     KP        1.02     
!   LA        0.98     MK        1.03     NL        0.97     OV        1.06     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        0.97     KP        1.02     
!   LA        0.96     MK        1.12     NL        1.04     OV        1.00     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.00     KP        1.01     
!   LA        1.00     MK        1.05     NL        1.06     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        0.99     KP        1.01     
!   LA        0.98     MK        0.94     NL        1.02     OV        0.99     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.00     KP        1.00     
!   LA        0.95     MK        0.93     NL        1.00     OV        1.02     
!   PT        0.98     SC        1.08     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        1.02     KP        0.95     
!   LA        1.02     MK        1.01     NL        1.01     OV        0.99     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.96     KP        1.07     
!   LA        1.03     MK        1.02     NL        1.00     OV        1.02     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.90     HN        0.92     KP        1.07     
!   LA        1.00     MK        0.96     NL        0.97     OV        1.07     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.86     KP        1.06     
!   LA        0.99     MK        0.99     NL        1.05     OV        0.96     
!   PT        0.98     SC        0.88     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.94     KP        0.99     
!   LA        1.01     MK        1.18     NL        0.98     OV        0.95     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.90     KP        1.00     
!   LA        1.03     MK        1.00     NL        0.99     OV        1.04     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.063532Jy  sigma=1.324460
! Fit after  self-cal, rms=0.062414Jy  sigma=1.322751
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9157 mas, bmaj=2.118 mas, bpa=4.302 degrees
! Estimated noise=0.207291 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000400149 Jy
! Component: 100  -  total flux cleaned = 0.000352237 Jy
! Component: 150  -  total flux cleaned = 0.000269206 Jy
! Component: 200  -  total flux cleaned = 0.000229685 Jy
! Total flux subtracted in 200 components = 0.000229685 Jy
! Clean residual min=-0.001231 max=0.001174 Jy/beam
! Clean residual mean=0.000000 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0699469 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 40 components and 0.0699469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062405Jy  sigma=1.322561
! Fit after  self-cal, rms=0.062402Jy  sigma=1.322358
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062402Jy  sigma=1.322358
! Fit after  self-cal, rms=0.062498Jy  sigma=1.320693
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9144 mas, bmaj=2.116 mas, bpa=4.388 degrees
! Estimated noise=0.206989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123891 Jy
! Component: 100  -  total flux cleaned = 6.82477e-05 Jy
! Component: 150  -  total flux cleaned = 6.77621e-05 Jy
! Component: 200  -  total flux cleaned = 8.45968e-05 Jy
! Total flux subtracted in 200 components = 8.45968e-05 Jy
! Clean residual min=-0.001157 max=0.001156 Jy/beam
! Clean residual mean=-0.000000 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0700315 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.0700315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062494Jy  sigma=1.320612
! Fit after  self-cal, rms=0.062515Jy  sigma=1.320435
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17, -10.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010921 Jy
! Component: 100  -  total flux cleaned = 0.00138952 Jy
! Component: 150  -  total flux cleaned = 0.00154509 Jy
! Component: 200  -  total flux cleaned = 0.00171304 Jy
! Total flux subtracted in 200 components = 0.00171304 Jy
! Clean residual min=-0.001146 max=0.001060 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0717445 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.0717445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062493Jy  sigma=1.319937
! Fit after  self-cal, rms=0.062492Jy  sigma=1.319868
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062492Jy  sigma=1.319868
! Fit after  self-cal, rms=0.062305Jy  sigma=1.319829
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9139 mas, bmaj=2.116 mas, bpa=4.337 degrees
! Estimated noise=0.206377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000367983 Jy
! Component: 100  -  total flux cleaned = 0.000481615 Jy
! Component: 150  -  total flux cleaned = 0.000524852 Jy
! Component: 200  -  total flux cleaned = 0.000564019 Jy
! Total flux subtracted in 200 components = 0.000564019 Jy
! Clean residual min=-0.001117 max=0.001044 Jy/beam
! Clean residual mean=-0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0723085 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 0.0723085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062297Jy  sigma=1.319666
! Fit after  self-cal, rms=0.062300Jy  sigma=1.319647
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119059 Jy
! Component: 100  -  total flux cleaned = 0.00014334 Jy
! Component: 150  -  total flux cleaned = 0.00013214 Jy
! Component: 200  -  total flux cleaned = 0.000132174 Jy
! Total flux subtracted in 200 components = 0.000132174 Jy
! Clean residual min=-0.001119 max=0.001036 Jy/beam
! Clean residual mean=-0.000000 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.0724407 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 72 components and 0.0724407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062295Jy  sigma=1.319561
! Fit after  self-cal, rms=0.062296Jy  sigma=1.319554
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062296Jy  sigma=1.319554
! Fit after  self-cal, rms=0.062249Jy  sigma=1.319539
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.15 mas, bmaj=3.526 mas, bpa=0.9319 degrees
! Estimated noise=0.261276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204025 Jy
! Component: 100  -  total flux cleaned = 0.000214948 Jy
! Component: 150  -  total flux cleaned = 0.000223113 Jy
! Component: 200  -  total flux cleaned = 0.000230647 Jy
! Total flux subtracted in 200 components = 0.000230647 Jy
! Clean residual min=-0.000939 max=0.000934 Jy/beam
! Clean residual mean=-0.000000 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0726713 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 87 components and 0.0726713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062249Jy  sigma=1.319509
! Fit after  self-cal, rms=0.062248Jy  sigma=1.319499
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.60706e-05 Jy
! Component: 100  -  total flux cleaned = 4.34317e-05 Jy
! Component: 150  -  total flux cleaned = 5.00876e-05 Jy
! Component: 200  -  total flux cleaned = 5.63032e-05 Jy
! Total flux subtracted in 200 components = 5.63032e-05 Jy
! Clean residual min=-0.000933 max=0.000929 Jy/beam
! Clean residual mean=-0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0727276 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.0727276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062248Jy  sigma=1.319485
! Fit after  self-cal, rms=0.062248Jy  sigma=1.319483
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9132 mas, bmaj=2.116 mas, bpa=4.327 degrees
! Estimated noise=0.206308 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9132 x 2.116 at 4.327 degrees (North through East)
! Clean map  min=-0.001028  max=0.050918 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7296 mas, bmaj=1.778 mas, bpa=2.081 degrees
! Estimated noise=0.331735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0376782 Jy
! Component: 100  -  total flux cleaned = 0.0495336 Jy
! Component: 150  -  total flux cleaned = 0.0566905 Jy
! Component: 200  -  total flux cleaned = 0.0612736 Jy
! Total flux subtracted in 200 components = 0.0612736 Jy
! Clean residual min=-0.002161 max=0.002438 Jy/beam
! Clean residual mean=-0.000002 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.0612736 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0612736 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9132 mas, bmaj=2.116 mas, bpa=4.327 degrees
! Estimated noise=0.206308 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407287 Jy
! Component: 100  -  total flux cleaned = 0.00634398 Jy
! Component: 150  -  total flux cleaned = 0.00788297 Jy
! Component: 200  -  total flux cleaned = 0.00901583 Jy
! Total flux subtracted in 200 components = 0.00901583 Jy
! Clean residual min=-0.001235 max=0.001120 Jy/beam
! Clean residual mean=0.000000 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0702894 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 29 components and 0.0702894 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.15 mas, bmaj=3.526 mas, bpa=0.9319 degrees
! Estimated noise=0.261276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111967 Jy
! Component: 100  -  total flux cleaned = 0.00180971 Jy
! Component: 150  -  total flux cleaned = 0.00216803 Jy
! Component: 200  -  total flux cleaned = 0.00227822 Jy
! Total flux subtracted in 200 components = 0.00227822 Jy
! Clean residual min=-0.000950 max=0.000950 Jy/beam
! Clean residual mean=-0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.0725676 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.68161e-05 Jy
! Component: 100  -  total flux cleaned = 9.06577e-05 Jy
! Component: 150  -  total flux cleaned = 0.000112003 Jy
! Component: 200  -  total flux cleaned = 0.000112061 Jy
! Total flux subtracted in 200 components = 0.000112061 Jy
! Clean residual min=-0.000940 max=0.000947 Jy/beam
! Clean residual mean=-0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.0726797 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 66 components and 0.0726797 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9132 mas, bmaj=2.116 mas, bpa=4.327 degrees
! Estimated noise=0.206308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206301 Jy
! Component: 100  -  total flux cleaned = 0.00022781 Jy
! Component: 150  -  total flux cleaned = 0.000280913 Jy
! Component: 200  -  total flux cleaned = 0.000313976 Jy
! Total flux subtracted in 200 components = 0.000313976 Jy
! Clean residual min=-0.001118 max=0.001060 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0729937 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.0729937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062254Jy  sigma=1.319656
! Fit after  self-cal, rms=0.062254Jy  sigma=1.319623
wmodel /J0853-0150_X_map.mod
! wmodel: Unable to open new model file: /J0853-0150_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219e_uvs/J0853-0150_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9132 x 2.116 at 4.327 degrees (North through East)
! Clean map  min=-0.0010413  max=0.050748 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219e_uvs/J0853-0150_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0507479 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000239258 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.41439 1.41439 2.82878 5.65756 11.3151 22.6302 45.2605 90.521
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.05 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  212.105 
quit
! Quitting program
! Log file /scr/pima/bg219e_uvs/J0853-0150_X_dfm.log closed on Thu May 19 18:32:01 2016